Search

BACKGROUND AND PURPOSE To identify and evaluate diagnostic magnetic resonance imaging (MRI) features in patients with suspicion of discoligamentous cervical injury after hyperextension trauma of the cervical spine. METHODS MR images with a standard protocol (1.5 T, including sagittal T2‐weighted images and short tau inversion recovery [STIR]) in 21 patients without any sign of fracture or instability on multidetector computed tomography of the cervical spine were assessed. Among other structures we evaluated the following: prevertebral hematoma, anterior longitudinal ligament (ALL), intervertebral disc, and spinal cord. Presence and the anatomic level of injury were identified and recorded. Results were then compared with intraoperative findings as a reference standard. Simple descriptive statistical analysis, agreement coefficients (given by calculating the percent agreement), and the determination of Gwet's AC1 coefficient were used to analyze our results. RESULTS The overall percent agreement between STIR and intraoperative findings was 90.9% (AC1 = .881) and for T2 69.7% (AC1 = .498). For the ALL, the overall agreement was 87.9% (AC1 = .808) and for the intervertebral disc 78.8% (AC1 = .673), in which STIR always showed a higher agreement. Prevertebral hematoma was found in 20 of 21 patients with the maximum thickness at the same anatomic level as the intraoperatively proven lesion in 12 of 18 patients (67%). Edema and/or hemorrhage of the spinal cord was shown in 16 of 21 being at the same anatomic level as the intraoperatively confirmed pathology in 16 of 16 patients (100%). CONCLUSIONS MRI is a reliable tool for the evaluation of discoligamentous injuries in the cervical spine, with ancillary features proven as helpful information.

Introduction In combined posterior–anterior stabilization of thoracolumbar burst fractures, the expandable vertebral body replacement device (VBRD) is typically placed bisegmentally for anterior column reconstruction (ACR). The aim of this study, however, was to assess feasibility, outcome and potential pitfalls of monosegmental ACR using a VBRD. In addition, clinical and radiological outcome of monosegmental ACR was related to that of bisegmental ACR using the same thoracoscopic technique. Methods Thirty-seven consecutive neurologically intact patients with burst fractures of the thoracolumbar junction (T11–L2) treated by combined posterior–anterior stabilization were included. Monosegmental ACR was performed in 18 and bisegmental ACR in 19 patients. Fracture type and extent of vertebral body comminution were determined on preoperative CT scans. Monosegmental and bisegmental kyphosis angles were analyzed preoperatively, postoperatively and at final radiological follow-up. Clinical outcome was assessed after a minimum of 2 years (74 ± 45 months; range 24–154; follow-up rate 89.2%) using VAS Spine Score, RMDQ, ODI and WHOQOL-BREF. Results Monosegmental ACR resulted in a mean monosegmental and bisegmental surgical correction of − 15.6 ± 7.7° and − 14.7 ± 8.1°, respectively. Postoperative monosegmental and bisegmental loss of correction averaged 2.7 ± 2.7° and 5.2 ± 3.7°, respectively. Two surgical pitfalls of monosegmental ACR were identified: VBRD positioning (1) onto the weak cancellous bone (too far cranially to the inferior endplate of the fractured vertebra) and (2) onto a significantly compromised inferior endplate with at least two (even subtle) fracture lines. Ignoring these pitfalls resulted in VBRD subsidence in five cases. When relating the clinical and radiological outcome of monosegmental ACR to that of bisegmental ACR, no significant differences were found, except for frequency of VBRD subsidence (5 vs. 0, P = 0.02) and bisegmental loss of correction (5.2 ± 3.7° vs. 2.6 ± 2.5°, P = 0.022). After exclusion of cases with VBRD subsidence, the latter did not reach significance anymore (4.9 ± 4.0° vs. 2.6 ± 2.5°, P = 0.084). Conclusions This study indicates that monosegmental ACR using a VBRD is feasible in thoracolumbar burst fractures if the inferior endplate is intact (incomplete burst fractures) or features only a single simple split fracture line (burst-split fractures). If the two identified pitfalls are avoided, monosegmental ACR may be a viable alternative to bisegmental ACR in selected thoracolumbar burst fractures to spare a motion segment and to reduce the distance for bony fusion.

Pedicle screw loosening is a common and significant complication after posterior spinal instrumentation, particularly in osteoporosis. Radiolucent carbon fiber-reinforced polyetheretherketone (CF/PEEK) pedicle screws have been developed recently to overcome drawbacks of conventional metallic screws, such as metal-induced imaging artifacts and interference with postoperative radiotherapy. Beyond radiolucency, CF/PEEK may also be advantageous over standard titanium in terms of pedicle screw loosening due to its unique material properties. However, screw anchorage and loosening of CF/PEEK pedicle screws have not been evaluated yet. The aim of this biomechanical study therefore was to evaluate whether the use of this alternative nonmetallic pedicle screw material affects screw loosening. The hypotheses tested were that (1) nonmetallic CF/PEEK pedicle screws resist an equal or higher number of load cycles until loosening than standard titanium screws and that (2) PMMA cement augmentation further increases the number of load cycles until loosening of CF/PEEK screws. In the first part of the study, left and right pedicles of ten cadaveric lumbar vertebrae (BMD 70.8 mg/cm3 ± 14.5) were randomly instrumented with either CF/PEEK or standard titanium pedicle screws. In the second part, left and right pedicles of ten vertebrae (BMD 56.3 mg/cm3 ± 15.8) were randomly instrumented with either PMMA-augmented or nonaugmented CF/PEEK pedicle screws. Each pedicle screw was subjected to cyclic cranio-caudal loading (initial load ranging from − 50 N to + 50 N) with stepwise increasing compressive loads (5 N every 100 cycles) until loosening or a maximum of 10,000 cycles. Angular screw motion (“screw toggling”) within the vertebra was measured with a 3D motion analysis system every 100 cycles and by stress fluoroscopy every 500 cycles. The nonmetallic CF/PEEK pedicle screws resisted a similar number of load cycles until loosening as the contralateral standard titanium screws (3701 ± 1228 vs. 3751 ± 1614 load cycles, p = 0.89). PMMA cement augmentation of CF/PEEK pedicle screws furthermore significantly increased the mean number of load cycles until loosening by 1.63-fold (5100 ± 1933 in augmented vs. 3130 ± 2132 in nonaugmented CF/PEEK screws, p = 0.015). In addition, angular screw motion assessed by stress fluoroscopy was significantly smaller in augmented than in nonaugmented CF/PEEK screws before as well as after failure. Using nonmetallic CF/PEEK instead of standard titanium as pedicle screw material did not affect screw loosening in the chosen test setup, whereas cement augmentation enhanced screw anchorage of CF/PEEK screws. While comparable to titanium screws in terms of screw loosening, radiolucent CF/PEEK pedicle screws offer the significant advantage of not interfering with postoperative imaging and radiotherapy. These slides can be retrieved under Electronic Supplementary Material.

Introduction The aim of this study was to evaluate results of surgical stabilisation of hyperextension injuries of the thoracolumbar spine in patients with ankylosing spinal disorders using two different treatment strategies: the conventional open rigid posterior instrumentation and percutaneous less rigid posterior instrumentation. Surgical and non-surgical complications, the postoperative radiological course, and clinical outcome at final follow-up were comparatively assessed. Moreover, we sought to discuss important biomechanical and surgical aspects specific to posterior instrumentation of the ankylosed thoracolumbar spine as well as to elaborate on the advantages and limitations of the proposed new treatment strategy involving percutaneous less rigid stabilisation and fracture reduction by postoperative mobilisation. Materials and methods Between January 2006 and June 2012, a consecutive series of 20 patients were included in the study. Posterior instrumentation was performed either using an open approach with rigid 6.0 mm bars (open rigid (OR) group) or via a percutaneous approach using softer 5.5 mm bars (percutaneous less rigid (PLR) group). Complications as well as the radiological course were retrospectively assessed, and patient outcome was evaluated at final follow-up using validated outcome scores (VAS Spine Score, ODI, RMDQ, Parker Mobility Score, Barthel Score and WHOQOL-BREF). Results Surgical complications occurred more frequently in the OR group requiring revision surgery in two patients, while there was no revision surgery in the PLR group. The rate of postoperative complications was lower in the PLR group as well (0.7 vs. 1.3 complications per patient, respectively). Fracture reduction and restoration of pre-injury sagittal alignment by postoperative mobilisation occurred within the first 3 weeks in the PLR group, and within 6 months in the OR group. The clinical outcome at final follow-up was very good in both groups with no relevant loss in VAS Spine Score (pain and function), Parker Mobility Score (mobility), and Barthel Index (social independency) compared to pre-operative values. Conclusions This study indicates that the proposed treatment concept involving percutaneous less rigid posterior instrumentation and fracture reduction by postoperative mobilisation is feasible, seems to facilitate adequate reduction and restoration of pre-injury sagittal alignment, and might have the potential to reduce the rate of complications in the management of hyperextension injuries of the ankylosed thoracolumbar spine.

Background Percutaneous sacroiliac screw fixation under fluoroscopic control is an effective method for posterior pelvic ring stabilization. However, sacral dysmorphism has a high risk of L5 nerve injury. This study describes a simple method for the preoperative assessment of the sacral morphology using CT scans with widely available tools. Materials and methods CT scans of 1000 patients were analyzed. True inlet, outlet, and lateral views of the sacrum were obtained using a two-dimensional reconstruction tool to align the sacrum in a reproducible manner. Corridor morphology in the inlet view was measured to calculate different morphological types: (1) Ascending type, (2) Horizontal type, and (3) Descending type. In a second step, the corridor was analyzed for the presence of an anterior indentation of the sacrum between the SI joint and the midsagittal plane with proximity to the nerve root L5, which, therefore, may be harmed during screw misplacement. Results A notch was found in the majority of cases with relative frequencies ranging from 69 % (upper quartile of S1) to 95 % (upper quartile of S2). Descending types were, by far, the most frequent corridor type with one exception: In the upper quartile of S1, the ascending type was the most frequent corridor (71 %). Horizontal types were less frequent with a relative incidence between 2 and 14 %. Discussion This study should increase the awareness for sacral dysmorphism, emphasize the importance of a preoperative assessment of the osseous corridor, and provide a simple method for the preoperative assessment with widely available tools.

To revisit the concept of spondylotic traumatic central cord syndrome (TCCS) by assessing the frequency of discoligamentous injury and to correlate magnetic resonance imaging (MRI) and intraoperative findings. A retrospective analysis of twenty-three consecutive patients (mean age: 62.7 ± 14.8 years) with profound spondylotic TCCS after acute cervical hyperextension trauma but without signs of instability on initial CT scans who underwent anterior surgical decompression and fusion was performed. Sensitivity and specificity of MRI in the detection of anterior longitudinal ligament disruption were calculated. The topographic relations between surgically verified segmental instabilities and spinal cord signals on MRI were analyzed. The cervical MRI scans of all patients were evaluated by the radiologist on call at time of admission, re-assessed by a specialized MRI radiologist for the purpose of this study and compared with intraoperative findings. Intraoperative findings revealed 25 cervical spine segments with hyperextension instability in 22 of 23 (95.7%) patients. The radiologist on call correctly assessed segmental hyperextension instability in 15 of 25 segments (sensitivity: 0.60, specificity: 1.00), while the specialized MRI radiologist was correct in 22 segments (sensitivity: 0.88, specificity: 1.00). In 17 of 23 (73.9%) patients, the level of spinal cord signal on MRI matched the level of surgically verified segmental instability. Our findings challenge the traditional concept of spondylotic TCCS as an incomplete cervical spinal cord injury without discoligamentous injury and emphasize the importance of MRI as well as the radiologist’s level of experience for the assessment of segmental instability in these patients. These slides can be retrieved under Electronic Supplementary Material.

In the last decades, several interspinous process devices were designed as a minimally invasive treatment option for spinal stenosis. In order to minimise surgical trauma, interspinous process devices were recently discussed as an alternative posterior fixation in vertebral interbody fusions. Therefore, the purpose of this study was to evaluate the effect of a newly designed interspinous device with polyester bands (PBs) on range of motion (RoM) and centre of rotation (CoR) of a treated motion segment in comparison with an established interspinous device with spikes (SC) as well as with pedicle screw instrumentation in lumbar fusion procedures. Flexibility tests with an applied pure moment load of 7.5 Nm were performed in six monosegmental thoracolumbar functional spinal units (FSUs) in the following states: (a) native, (b) native with PB device, (c) intervertebral cage with PB device, (d) cage with SC and (e) cage with internal fixator. The resulting RoM was normalised to the native RoM. The CoR was determined of X-ray images taken in maximal flexion and extension during testing. In flexion and extension, the PB device without and with the cage reduced the RoM of the native state to 58% [standard deviation (SD) 17.8] and 53% (SD 15.7), respectively. The SC device further reduced the RoM to 27% (SD 16.8), while the pedicle screw instrumentation had the most reducing effect to 17% (SD 17.2) (p

Percutaneous sacroiliac screw fixation under fluoroscopic control is an effective method for posterior pelvic ring stabilization. However, sacral dysmorphism has a high risk of L5 nerve injury. This study describes a simple method for the preoperative assessment of the sacral morphology using CT scans with widely available tools.CT scans of 1000 patients were analyzed. True inlet, outlet, and lateral views of the sacrum were obtained using a two-dimensional reconstruction tool to align the sacrum in a reproducible manner. Corridor morphology in the inlet view was measured to calculate different morphological types: (1) Ascending type, (2) Horizontal type, and (3) Descending type. In a second step, the corridor was analyzed for the presence of an anterior indentation of the sacrum between the SI joint and the midsagittal plane with proximity to the nerve root L5, which, therefore, may be harmed during screw misplacement.A notch was found in the majority of cases with relative frequencies ranging from 69 % (upper quartile of S1) to 95 % (upper quartile of S2). Descending types were, by far, the most frequent corridor type with one exception: In the upper quartile of S1, the ascending type was the most frequent corridor (71 %). Horizontal types were less frequent with a relative incidence between 2 and 14 %.This study should increase the awareness for sacral dysmorphism, emphasize the importance of a preoperative assessment of the osseous corridor, and provide a simple method for the preoperative assessment with widely available tools.

The treatment of osteoporotic vertebral fractures is complicated because of the comorbid conditions of the elderly patient. Underlying osteoporosis leads to malalignment of the weakened bone and impedes fracture fixation. The treatment of osteoporotic vertebral fractures is widely empirical, because standardized and accepted treatment evidence-based concepts are missing for certain fracture types. As in other osteoporotic fractures in the elderly, the key for good outcome may be a combination of interdisciplinary treatment approaches and adapted surgical procedures. This article gives an overview of the underlying problems and possible treatment strategies for treatment of osteoporotic vertebral fractures in geriatric patients.

ZusammenfassungMit zunehmendem Alter der Bevölkerung kommt es zum Anstieg osteoporotischer Wirbelfrakturen. Aufgrund der vorhandenen Komorbiditäten und der zugrunde liegenden Osteoporose gestaltet sich die medizinische Behandlung der älteren Patienten oft schwierig. Die Osteoporose begünstigt Fehlstellungen des geschwächten Knochens mit funktionellen Folgen. Bis heute erfolgt die Behandlung von osteoporotischen Wirbelfrakturen weitgehend empirisch bedingt durch fehlende evidenzbasierte Konzepte bei speziellen Frakturtypen. Die Kombination von interdisziplinärer Behandlung mit adaptiertem chirurgischem Vorgehen, wie es bei anderen osteoporotischen Frakturen bereits erfolgt, könnte der Schlüssel für ein verbessertes klinisches Ergebnis sein. Diese Arbeit zeigt eine Übersicht der vorhandenen Probleme und der möglichen Behandlungsoptionen osteoporotischer Wirbelfrakturen bei geriatrischen Patienten.

Background Fragility fractures are a major health care problem worldwide. Due to the ageing population an increase of distal femoral fractures is to be expected. We studied the long-term functional outcome and their influencing factors in geriatric patients with LISS-plated distal femoral fractures. Patients and methods A cohort study with functional long-term follow up examination was carried out in a level one trauma centre on distal femoral fracture patients 65 years and older. Of 53 consecutive patients who were treated in our hospital, 43 patients with a mean age of 80 years met our inclusion criteria. 48.8% died within the study period of 5.3 years. On the remaining patients the residential status, the Barthel index and the Parker score were assessed. Results The mean Barthel index was 47.7 and the mean Parker score was 3.5. 23% were found to be totally housebound and 26% were not able to perform any social activity. Only 18% were able to walk unaided. Patients with any medical complication had significantly higher mortality rates. Patients with extraarticular fractures had better mobility scores. Nursing home residents showed higher mortality rates but compared to patients coming from their own home the difference regarding Barthel and Parker scores remained non-significant. Conclusion This study documents the poor functional long-term outcome of geriatric patients with distal femoral fractures. In comparison to other fragility fracture patients it seems that this population is at higher risk to die in-hospital during their perioperative course. Medical complications have to be avoided as they were found to be associated with worse functional outcome and higher mortality rates. An osteoporosis therapy may be associated with reduced mortality rates also in these patients.

Background The optimal treatment strategy for burst fractures of the thoracolumbar junction is discussed controversially in the literature. Whilst 360° fusion has shown to result in better radiological outcome, recent studies have failed to show its superiority concerning clinical outcome. The morbidity associated with the additional anterior approach may account for these findings. The aim of this prospective observational study was therefore to compare two different techniques for 360° fusion in thoracolumbar burst fractures using either thoracoscopy or a transforaminal approach (transforaminal lumbar interbody fusion (TLIF)) to support the anterior column. Methods Posterior reduction and short-segmental fixation using angular stable pedicle screw systems were performed in all patients as a first step. Monocortical strut grafts were used for the anterior support in the TLIF group, whilst tricortical grafts or titanium vertebral body replacing implants of adjustable height were used in the combined posteroanterior group. At final follow-up, the radiological outcome was assessed by performing X-rays in a standing position. The clinical outcome was measured using five validated outcome scores. The morbidity associated with the approaches and the donor site was assessed as well. Results There were 21 patients in the TLIF group and 14 patients in the posteroanterior group included. The postoperative loss of correction was higher in the TLIF group (4.9° ± 8.3° versus 3.4° ± 6.4°, p > 0.05). There were no significant differences regarding the outcome scores between the two groups. There were no differences in terms of return to employment, leisure activities and back function either. More patients suffered from donor-site morbidity in the TLIF group, whilst the morbidity associated with the surgical approach was higher in the posteroanterior group. Conclusion The smaller donor-site morbidity in the posteroanterior group is counterbalanced by an additional morbidity associated with the anterior approach resulting in similar clinical outcome. Mastering both techniques will allow the spine surgeon to be more flexible in specific situations, for example, in patients with neurological deficits or severe concomitant thoracic trauma.

Treatment of thoracolumbar fractures is still controversial. Several treatment options are reported to yield satisfactory results. There is no evidence indicating superiority of any treatment option. We have already presented radiological results of the use of PLIF/TLIF in trauma, which showed satisfactory results concerning intervertebral fusion and acceptable loss of correction. We examined 50 patients regarding loss of correction after implant removal and clinical outcome using a validated visual analogue score. The average time of follow-up (FU) was 35 months. We observed a total loss of correction of 4°. The pre-injury mean VAS score was 92. At FU, there was an average reduction of 17.2 points. Owing to the presented results, we suggest this method as an alternative to combined procedures.

Lumbosacral fracture dislocation is a very rare lesion and was first described by Watson-Jones in 1940. Two anatomical classifications are described in the literature, all other reports are case presentations. This fracture type is characterised by an antero- or retrolisthesis or a lateral translation of the 5th lumbar vertebra in relation to the sacrum. Biomechanics are discussed controversially. Most patients suffer from a high energy trauma with concomitant severe injuries. There is a high rate of additional neurological deficits. Fractures of the transverse process are thought to be sentinel fractures. MRI and CT scans are essential to detect the whole extent of the lesion. Circumferential fusion is recommended by several authors to regain stability at the lumbosacral junction.

Patients with fractures from the 11th thoracic to the 5th lumbar vertebra had a reconstruction of the anterior column with monocortical iliac crest autograft by using a single dorsal approach. The loss of correction was observed using X-rays pre- and post-operatively, at 3 months and after implant removal (IR). Successful fusion was assessed using computed tomography after the implant removal. To assess the loss of correction and intervertebral fusion rate of this technique. There are still controversial discussions about the treatment modalities of spine lesions, especially in cases of burst fractures. Dorsal, combined and ventral procedures are reported with different assets and drawbacks. We want to present a method to restore the weight-bearing capability of the anterior column using a single dorsal approach. From 2001 to 2005, a total of 100 patients was treated with this technique at our department. Follow-up examination was possible in 82 patients. The X-rays and CT scans were proofed for loss of correction and fusion rate. The anterior column has been restored using a monocortical strut graft via a partial resection of the lamina and the apophyseal joint on one side to access the disc space. The dorsal reduction has been achieved using an angular stable pedicle screw system. The mean follow-up time was 15 months (range 8-39); 67 patients had a CT scan at follow-up and 83% showed a 360 degrees fusion. The average post-operative loss of correction was 3.3 degrees (range 0-21). The average duration of operation was 192 min (range 120-360) and the mean blood loss was 790 ml (range 300-3,400 ml). Regarding the complications we did not have any deep wound infections. We had two epidural haematomas postoperatively with a neurological deterioration that had to be revised. We were able to decompress the neurological structures and restore the weight-bearing capability of the anterior column in a one-stage procedure. So we think that this technique can be an alternative procedure to combined operations regarding the presented radiological results of successful fusion and loss of correction.

Traumatic facet dislocations and facet-fracture dislocations in the lower cervical spine (C2/C3 to C7/T1) are frequently associated with devastating neurological symptoms. A good outcome can only be achieved if the operator has wide and sound knowledge of reduction techniques and the best possible strategy is devised for the subsequent treatment of these severe lesions.Between 1973 and 1997 a total of 117 of our patients met at least one of the following inclusion criteria: unilateral locked facet dislocation (48%), bilateral locked facet dislocations (23%), unilateral "perched" facet subluxation (14%), bilateral perched facet subluxation (12%), uni- or bilateral dislocation/perched subluxation with facet fractures (3%).Most of the lesions were located at the levels of C5/C6 and C6/7 (n=46 for each). Associated neurological deficits were present initially in 65% of patients: 35% had complete or incomplete spinal cord injuries (tetraplegia), 2% were paraplegic, and 28% had cervical radiculopathies.Closed reduction (e.g. with the aid of a halo ring) should be carried out as soon as possible after lower cervical spine dislocation or facet-fracture dislocation, as both the success rate of reduction and the potential for recovery from neurological deficits are clearly higher when reduction is achieved within the first 4 h after the initial injury.

Fractures of the pubic rami are typically classified as stable injuries. The current treatment strategies involve pain management and mobilization. However, pain-dependent immobilization may pose a serious hazard to patients with severe preexisting co-morbidities. There is paucity of literature on the outcome and mortality of these patients. We retrospectively analysed 534 patients with these injuries. The following parameters were examined: gender, age, mechanism of injury, fracture pattern, length of hospital stay, care after discharge, number of outpatient follow-ups, and 1-year mortality. Multiple logistic regression analysis was performed for the assessment of factors influencing 1-year mortality. The observed 1-year mortality in the patients group was further compared to a virtual control group with the same age and gender distribution. Women were older and more frequently injured as a result of a simple fall. Age was the only factor to be predictive of 1-year mortality. Mortality increased with higher age in both the patient and the control group, but mortality was higher in the patients group in all age groups. This difference was significant for patients ≥90 years of age. Pubic rami fractures are a heterogeneous cohort of injuries and might not be as benign as thought in patients with severe preexisting co-morbidities. Prospective studies are needed to better gauge the outcome after pubic rami fractures.

This article reports about the internet based, second multicenter study (MCS II) of the spine study group (AG WS) of the German trauma association (DGU). It represents a continuation of the first study conducted between the years 1994 and 1996 (MCS I). For the purpose of one common, centralised data capture methodology, a newly developed internet-based data collection system ( http://www.memdoc.org ) of the Institute for Evaluative Research in Orthopaedic Surgery of the University of Bern was used. The aim of this first publication on the MCS II was to describe in detail the new method of data collection and the structure of the developed data base system, via internet. The goal of the study was the assessment of the current state of treatment for fresh traumatic injuries of the thoracolumbar spine in the German speaking part of Europe. For that reason, we intended to collect large number of cases and representative, valid information about the radiographic, clinical and subjective treatment outcomes. Thanks to the new study design of MCS II, not only the common surgical treatment concepts, but also the new and constantly broadening spectrum of spine surgery, i.e. vertebro-/kyphoplasty, computer assisted surgery and navigation, minimal-invasive, and endoscopic techniques, documented and evaluated. We present a first statistical overview and preliminary analysis of 18 centers from Germany and Austria that participated in MCS II. A real time data capture at source was made possible by the constant availability of the data collection system via internet access. Following the principle of an application service provider, software, questionnaires and validation routines are located on a central server, which is accessed from the periphery (hospitals) by means of standard Internet browsers. By that, costly and time consuming software installation and maintenance of local data repositories are avoided and, more importantly, cumbersome migration of data into one integrated database becomes obsolete. Finally, this set-up also replaces traditional systems wherein paper questionnaires were mailed to the central study office and entered by hand whereby incomplete or incorrect forms always represent a resource consuming problem and source of error. With the new study concept and the expanded inclusion criteria of MCS II 1, 251 case histories with admission and surgical data were collected. This remarkable number of interventions documented during 24 months represents an increase of 183% compared to the previously conducted MCS I. The concept and technical feasibility of the MEMdoc data collection system was proven, as the participants of the MCS II succeeded in collecting data ever published on the largest series of patients with spinal injuries treated within a 2 year period.