Search

The tradition of floristic studies in Italy has made it possible to obtain a good knowledge of plant diversity both on a national and regional scale. However, the lack of knowledge for some areas, advances in plant systematics and human activities related to globalization, highlight the need for further studies aimed at improving floristic knowledge. In this paper, based on fieldwork and herbaria and literature surveys, we update the knowledge on the Italian vascular flora and analyze the floristic similarities between the administrative regions. Four taxa, all exotic, were recorded for the first time in Italy and Europe. In detail, Elaeodendron croceum, Kalanchoë blossfeldiana, and Sedum spathulifolium var. spathulifolium were found as casual aliens, while Oxalis brasiliensis was reported as historical record based on some herbarium specimens. Furthermore, Kalanchoë laxiflora was confirmed as a casual alien species for Italy and Europe. Status changes for some taxa were proposed at both national and regional levels, as well as many taxa were reported as new or confirmed at the regional level. Currently the Italian vascular flora comprises 9150 taxa of which 7547 are native (of which 1598 are Italian endemics) and 1603 are exotic at the national level. The multivariate analysis of updated floristic data on a regional scale showed a clear distribution along the latitudinal gradient, in accordance with the natural geographical location of the regions in Italy. This pattern of plants distribution was not affected by the introduction of alien species. Despite some taxonomic and methodological issues which are still open, the data obtained confirm the important role of floristic investigations in the field and in herbaria, as well as the collaborative approach among botanists, in order to improve the knowledge of the Italian and European vascular flora.

In this contribution, new data concerning the distribution of vascular flora alien to Italy are presented. It includes new records, confirmations, exclusions, and status changes for Italy or for Italian administrative regions. Nomenclatural and distribution updates published elsewhere are provided as Suppl. material 1.

A methodology is proposed for efficient processing of sea wave field data via compressive sensing (CS), and joint time-frequency analysis via harmonic wavelets (HWs) based evolutionary power spectrum (EPS) estimation. In this regard, it is possible to record and store relatively long wave data sequences, whereas the commonly adopted in-practice assumption of stationary data is abandoned. Currently, most wave records are measured by buoys, which acquire data for a time interval representative of stationary time series. Next, following a Fourier transform processing, only few spectral parameters are stored. Thus, detailed information about localized-in-time phenomena are completely lost. Herein, it is shown that CS can be adopted for efficiently compressing and reconstructing wave data, while retaining localized information. For this purpose, CS is used in conjunction with a HW basis for processing long time series. In particular, storage capacity demands are drastically decreased as only the HW coefficients need to be saved. These are determined from a randomly-sampled record by invoking a L1/2 norm minimization procedure. The resulting reconstructed record, being longer than conventional wave time series, can no longer be regarded as stationary; thus, a HW based EPS estimate is employed for describing the joint time-frequency features of the record. Finally, the reliability of the methodology is assessed by analyzing wave field data measured at the Natural Ocean Engineering Laboratory (NOEL) of Reggio Calabria. Specifically, comparisons between original and reconstructed records demonstrate a satisfactory agreement regarding the time-histories, and the estimated EPS and relevant statistical quantities, even for up to 60% missing/removed data.

The REWEC3 (Resonant Wave Energy Converter) is a fixed oscillating water column (OWC) wave energy converter (WEC) incorporated in upright breakwaters. The device is composed by a chamber containing a water column in its lower part and an air pocket in its upper part. The air pocket is connected to the atmosphere via a duct hosting a self-rectifying air turbine. In addition, a REWEC3 includes a vertical U-shaped duct for connecting the water column to the open sea (for this reason it is known also as U-OWC). The working principle of the system is quite simple: by the action of the incident waves, the water inside the U-shaped duct is subject to a reciprocating motion, which induces alternately a compression and an expansion of the air pocket. The pressure difference between the air pocket and the atmosphere is used to drive an air turbine coupled to an off-the-shelf electrical generator connected to the grid. The main feature of the REWEC3 is the possibility of tuning the natural period of the water column in order to match a desired wave period through the size of the U-duct. The REWEC3 technology has been theoretically developed by Boccotti, later tested at the natural basin of the Natural Ocean Engineering Laboratory (NOEL, Italy), and finally proved at full scale with REWEC3 prototype built in the Port of Civitavecchia (Rome, Italy). The objective of this paper is to select and optimize a turbine/generator set of a U-shaped OWC installed in breakwaters located in the Mediterranean Sea, such as the Port of Civitavecchia, where the first prototype of REWEC3 has been realized, or the Port of Salerno or Marina delle Grazie of Roccella (Italy). The computations were performed using a time domain model based on the unsteady Bernoulli equation. Based on the time-domain model of the power plant, the following data is computed for the turbines: i) the ideal turbine diameter; ii) the generator feedback control law aiming to maximize the turbine power output for turbine coupled to the REWEC3 device for Mediterranean applications.

The design of any wave energy converter involves the determination of relevant statistical data on the wave energy resource oriented to the evaluation of the structural reliability and energy performance of the device. Currently, limited discussions concern the estimation of parameters connected to the energy performance of a device. Thus, this paper proposes a methodology for determining average downtime and average missed energy, which is the energy that is not harvested because of device deactivations during severe sea storms. These quantities are fundamental for evaluating the expected inactivity of a device during a year or during its lifetime and are relevant for assessing the effectiveness of a device working at a certain site. For this purpose, the equivalent power storm method is used for their derivation, starting from concepts pertaining to long-term statistical analysis. The paper shows that the proposed solutions provide reliable estimations via comparison with results obtained by processing long wave data.

The Resonant Wave Energy Converter 3 (REWEC3) is a wave energy converter belonging to the family of Oscillating Water Columns (OWCs). It comprises an oscillating water column and an air pocket connected to a turbine, as for traditional OWCs. In addition, it has a small vertical U-shaped duct used for connecting the water column to the open wave field. Because of this particular geometrical configuration, it is also known as U-Oscillating Water Column (U-OWC). During the past decade, small scale field experiments and theoretical analyses proved its potential for full scale applications. Currently, a full-scale prototype has been operating in the Port of Civitavecchia (Rome, Italy), where a REWEC3 was constructed within the context of a major port enlargement. This paper shows some results of the monitoring activity on a single chamber equipped with pressure gauges. The results show some initial energetic performances of the REWEC3 in wind-generated seas.

The design of an energy harvester involves achieving the two following objectives: to install a safe structure with a reasonable safety margin; and to install an effective device which is able to capture energy in a variety of environmental conditions. In this context, the long-term modelling of the environmental variables plays a crucial role. In the context of wave energy harvesters, the occurrence of sea storms is a critical element in the design process. Indeed, its identification is required for determining extreme loads as well as controlled de-activations of the device for preserving the mechanical components into the device. Considering these issues, the paper proposes an analysis of the wave climate oriented to the determination of the downtime and of the energy losses. Specifically, the paper provides expressions: for calculating the average deactivation time of a wave energy device, given that it must be deactivated if the significant wave height is larger than a certain threshold; and for calculating the energy “lost” (as it is not absorbed by the device) during a storm in which the maximum wave height is larger than the mentioned threshold. The paper shows that closed-form expressions can be obtained by relying on the Equivalent Triangular Storm (ETS) model and that the adequacy of the estimations improves for larger values of the significant wave height threshold.

This paper deals with the implementation of a control algorithm for a turbine equipped into a U-Oscillating water column (U-OWC) plant. The open literature has largely ignored the problem of coupling the U-OWC behaviour to the turbine behaviour with the objective of maximizing the energy harvesting. Therefore, this paper has the objective of assessing the reliability of a Maximum Power Point Tracking (MPPT) algorithm. The paper uses a numerical algorithm for estimating the energy produced by a U-OWC in real seas. In this regard, the computations rely on long time domain analyses that allow testing a variety of environmental conditions. The MPPT is proved adequate for controlling the turbine behavior in conjunction with U-OWCs. In this context, it is shown that a reference parameter, used for determining the reference rotational speed, can be the significant wave height.

The objective of this paper is to provide a synthetic tool for determining expeditiously the wave climate conditions in several areas of the Mediterranean Sea. In the open literature, several authors have already conducted this specific analysis also for the area under examination in this paper. However, the need of discussing aspects strictly related to the design of wave energy harvesters is still relevant. Therefore, considering the variety of devices and the amount of information needed for conducting both an energy-wise optimization and a structural reliability assessment, a holistic view on the topic is provided. Specifically, the paper elucidates the theoretical aspects involved in the estimation of wave energy statistics and in the calculation of relevant return values. Next, it provides synthetic data representing the mean wave power and the return value of extreme events in several coastal areas of the Mediterranean Sea. In this regard, the paper complements information available in the open literature by discussing the influence of the directional pattern of the sea states in the determination of sea state statistics as well as in the design of a wave energy harvester. © 2014 Elsevier Ltd.

In the last decades, the research has directed its efforts and resources paper is to investigate towards the possibility to incorporate wave energy converters, into the traditional maritime breakwaters to combine classical use with new opportunities and developments (for example, the Green Ports). Since the nineties, the OWC (Oscillating Water Column) plants were developed at full scale to produce electrical power from ocean waves. For instance, a new plant was built in Mutriku (Spain) recently. A new kind of OWC caisson, named U-OWC or REWEC3, which has the advantage to obtain an impressive natural resonance without any device for phase control, has been patented by Boccotti [1]. This new U-OWC device gives performances better than those of a conventional OWC either with small wind waves or with high waves [2,3,4]. The properties of the REWEC3 have been verified with two small-scale field experiments carried out in the natural ocean engineering laboratory NOEL of Reggio Calabria off the eastern coast of the Sicily Channel [5–7]. The aim of the present two sites along Italian coasts for possible installations of REWEC3 devices: i) the port of Civitavecchia (Rome, Italy)in the Tyrrhenian sea; ii) the port of Pantelleria, in the Sicily Channel.