Search

This research is focused on the screw-structure interaction under dynamic impulses aimed to the contact analysis of gap propagation at dental implant-abutment interface under dynamic loading. The purpose is to investigate the fracture mechanism that occurs during the screw penetration in a support and during the support vibration. Numerical Finite Element (FEM) analyses are calibrated through experimental laboratory measurements on support materials and screws typologies. Uncertainty due to the laboratory error propagation is investigated using Polynomial Chaos Expansion (PCE) of experimental measurements. The research is planned through the following steps: FEM calibration trough laboratory experiments on materials; laboratory experiments and material mechanics identification; uncertainty error propagation analysis through PCE expansion; fragility curves for numerical model calibration; FEM models calibration trough laboratory measurements on cycling loads. Therefore, the main purpose of the research activity, of which this article constitutes a preliminary and an explorative step, is to study a methodology that minimizes the local damage of the dental material due to the generation of micro-cracks following the implantation actions. Accordingly, in this paper, preliminary results are reported.

Simple Summary Head and neck cancer (HNC) is a complex and extremely heterogeneous disease that includes a wide variety of cancer subtypes. Despite notable advances in understanding the molecular mechanisms involved in the disease, which allowed the increase of the therapeutic armamentarium, HNC treatment remains very challenging. In fact, to date the average 5-year survival rate for this disease is around 65%; hence, HNC continues to be one of the most aggressive solid tumors. Surgical removal is the first treatment of choice for HCN; however, in addition to this treatment modality, a broad spectrum of new therapies has been developed so far, ranging from multimodal chemotherapy to targeted and immune-therapy, mainly through the use of antibodies. In this work, we systematically reviewed the progress obtained in antibody-drug conjugate (ADC) development for the treatment of HNC. Abstract Background: Antibody-drug conjugates (ADCs) are designed to deliver potent cytotoxic agents into tumor tissues. During the last two decades, a plethora of ADCs have been successfully developed and used for several indications, including hematologic and solid tumors. In this work, we systematically reviewed the progress in ADC development for the treatment of HNC. Methods: This review was registered in PROSPERO database. A comprehensive search was conducted following PRISMA guidelines and using PubMed, Scopus and Web of Science database. Results: In total, 19 studies were included. Due to the significant heterogeneity of the outcome measures, meta-analysis was not performed, and data were summarized in tables. HNC results are poorly represented in the cohorts of completed clinical trials; published data are mostly focused on safety evaluation rather than efficacy of ADCs. Conclusions: Although several novel agents against a wide range of different antigens were investigated, showing promising results at a preclinical level, most of the targets reported in this review are not specific for HNC; hence, the development of ADCs tailored for the HNC phenotype could open up new therapeutic perspectives. Moreover, the results from the present systematic review call attention to how limited is the application of current clinical trials in HNC.

Objectives The aim of the present study was to investigate whether peri-implant clinical parameters (modified plaque index (mPI), bleeding and/or suppuration on probing (B/SOP)) and local factors (type of prostheses, screw emergence, platform diameter, and abutment angulation) might contribute to the development of additional bone loss and peri-implantitis around dental implants. Materials and methods Two hundred seventy-seven external hex connection implants placed in the posterior maxilla of 124 patients were retrospectively evaluated. They were divided into two groups: physiologic bone loss < 2 mm (PBL) or additional bone loss ≥ 2 mm (ABL). GEE logistic regression was applied to evaluate the influence of type of prostheses (implant-supported single crown (ISSC), fixed partial denture (ISFPD), and full denture (ISFD)) and clinical parameters (mPI and S/BOP) on bone loss. Results Among the 277 implants, 159 (57.4%) presented PBL and 118 (42.6%) presented ABL. Within the ABL group, 20.6% implants were diagnosed with peri-implantitis. mPI significantly correlated with the type of prosthesis and the highest value of mPI (index = 3) was observed in ISFD (23.8%). Moreover, peri-implantitis was more frequently associated with ISFD (32.79%) than ISSC and ISFDP (13.79% and 13.48, respectively) Conclusions ISFD in the posterior maxilla presented high rates of ABL and showed a higher prevalence of peri-implantitis. None of the local factors seemed to contribute to the development of these conditions. Further investigations are needed to prospectively support the results of the present study. Clinical relevance Patients rehabilitated with ISFD should be carefully monitored and have more frequent maintenance visits to prevent or control peri-implant bone loss.

Fractal dimension (FD) calculated on oral radiographs has been proposed as a useful tool to screen for osteoporosis. This systematic review and meta-analysis firstly aimed at assessing the reliability of FD measures in distinguishing osteoporotic patients (OP) from healthy controls (HC), and secondly, to identify a standardized procedure of FD calculation in dental radiographs for the possible use as a surrogate measure of osteoporosis. A comprehensive search was conducted up to September 2020 using PubMed, Web of Science, and SCOPUS databases. The Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) statement was followed. Meta-analysis was performed on FD values calculated for HC and OP. Overall, 293 articles were identified. After a three steps screening, 19 studies were included in the qualitative appraisal and 12 were considered for meta-analysis. The methodological quality of the retrieved studies was generally low. Most of the studies included used White and Rudolph and box counting to process the images and to calculate FD, respectively. Overall, 51% of the studies found a meaningful difference between HC and OP groups. Meta-analyses showed that to date, FD measures on dental radiographs are not able to distinguish the OP from HC group significantly. From the current evidence, the use of FD for the identification of OP is not reliable, and no clear conclusion can be drawn due to the heterogeneity of studies. The present review revealed the need for further studies and provided the fundamentals to design them in order to find a standardized procedure for FD calculation (regions for FD assessment; images processing technique; methods for FD measurement). More effort should be made to identify osteoporosis using dental images which are cheap and routinely taken during periodic dental examinations. Supplementary Information The online version contains supplementary material available at 10.1007/s00198-021-05852-3.

In recent years, cold atmospheric plasma (CAP) technologies have received increasing attention in the field of biomedical applications. The aim of this article is to review the currently available literature to provide an overview of the scientific principles of CAP application, its features, functions, and its applications in systemic and oral diseases, with a specific focus on its potential in implantology. In this narrative review, PubMed, Medline, and Scopus databases were searched using key words like “cold atmospheric plasma”, “argon plasma”, “helium plasma”, “air plasma”, “dental implants”, “implantology”, “peri-implantitis”, “decontamination”. In vitro studies demonstrated CAP’s potential to enhance surface colonization and osteoblast activity and to accelerate mineralization, as well as to determine a clean surface with cell growth comparable to the sterile control on both titanium and zirconia surfaces. The effect of CAP on biofilm removal was revealed in comparative studies to the currently available decontamination modalities (laser, air abrasion, and chlorhexidine). The combination of mechanical treatments and CAP resulted in synergistic antimicrobial effects and surface improvement, indicating that it may play a central role in surface “rejuvenation” and offer a novel approach for the treatment of peri-implantitis. It is noteworthy that the CAP conditioning of implant surfaces leads to an improvement in osseointegration in in vivo animal studies. To the best of our knowledge, this is the first review of the literature providing a summary of the current state of the art of this emerging field in implantology and it could represent a point of reference for basic researchers and clinicians interested in approaching and testing new technologies.

Agenesis of lateral incisors, besides the functional issues, represents a great esthetic drawback. The selection of an appropriate treatment is a complex decision, which should consider the stability of the clinical outcomes over time. The aim of the present study was a histological and clinical comparison of two-stage split crest technique (SCT), with bone chips alone or mixed with porcine bone in patients affected by unilateral and bilateral agenesis of the upper lateral incisors. Eleven patients were enrolled, and randomly assigned to receive a treatment with autologous bone chips (group 1) or autologous bone chips mixed 1:1 to porcine-derived xenogenic bone (group 2). After a 2-month healing period, implants were placed and biopsies harvested for histomorphometrical evaluation. Clinical assessment, according to ICOI PISA health scale, and radiographic marginal bone loss evaluation at 12- and 24-month follow-ups were conducted. The histomorphometry showed significantly greater new bone formation (p > 0.0229) in group 2. At 12- and 24-month follow-ups, all the evaluated implants, regardless of the group they were allocated, could be categorized as “success” in the ICOI Pisa Health Scale for Dental Implants, and did not show significant difference in crestal bone loss. To the best of our knowledge, these are the first histological and clinical outcomes indicating that the use of bone chips mixed 1:1 to porcine bone in SCT could be a promising technique for the rehabilitation of patients with agenesis of the upper lateral incisors, although studies with a larger number of patients and implants, and a longer follow up are needed.

Objectives The primary aim of the present article was to review the effect and the clinical significance of abutment dis- and reconnection on the peri-implant marginal bone levels. Materials and methods English articles published from 2009 to April 2019 were identified on the MEDLINE, Cochrane Library, and PubMed databases, according to the PRISMA guidelines. Comparative in vivo studies on humans were included. Results A total of 4 studies with different levels of bias were included in this review. A significant heterogeneity of the reported data was observed, which limited the comparison of the findings. The only parameter that was homogenous throughout all 4 studies was the marginal bone level measurement. Conclusion Within the limitations of the present review, it can be suggested that minimizing the number of abutment dis- and reconnections would be beneficial to ensure minimal disruption to the peri-implant tissue and marginal bone level. However, the clinical significance of the marginal bone level changes is still inconclusive.

The aim of the present study was to review the effectiveness, side effects, and patient acceptance of different concentrations and formulation of chlorhexidine-based mouthwashes used after periodontal and implant surgery.The PRISMA guideline was adopted in the search strategy using electronic databases PubMed and MEDLINE to identify randomized and case-control prospective studies on humans written in English language and published up to September 2017.A total of 10 articles were selected for a total of 344 patients. Because of the significant heterogeneity of the outcome measures, meta-analysis was not performed, and the data were summarized in a table. A positive relationship between the use of chlorhexidine and reduction of plaque was found, demonstrating the effectiveness of the substance in terms of antisepsis and decrease of inflammation after periodontal and implant surgery.Chlorhexidine is recognized as the primary agent for plaque control and the gold standard in preventing infection, although the presence of largely known side effects would affect patient compliance. Future research should be directed at finding chlorhexidine formulation with negligible adverse effects, without compromising or even increasing its effectiveness as the antiseptics and antiplaque agent.

Background The aim of this study was to compare different surgical therapies to treat peri-implantitis. Methods Twenty-three patients presenting one implant affected by peri-implantitis were divided into three groups: (i) open flap debridement (OFD) and citric acid decontamination (CAD); (ii) OFD, CAD and subepithelial connective tissue graft (SCTG); (iii) OFD, CAD and implantoplasty. Modified plaque index (MPI), gingival bleeding index (GBI), keratinized mucosa (KM) width, probing depth (PD), bleeding or suppuration on probing (B/SOP), and radiographic crestal bone level were registered 1(T1), 2(T2) and 3(T3) years after treatment. Results In Group 1 there was a significant improvement in MPI from baseline to T1, and a significant reduction in PD over time. In Group 2, none of the assessed clinical parameters showed any statistically significant variation over time. In Group 3, there was a significant decrease in PD and B/SOP over time. When comparing the 3 Groups, KM was significanlty greater in Group 2 vs. Group 1 and Group 3 at T1 and T2, and in Group 2 vs. Group 3 at T3. Conclusion All therapies were successful in the management of peri-implantitis; however, SCTG maintained the greatest KM width. Surgical therapies combined with mechanical and chemical decontamination contributed to peri-implant tissue health.

The only way to evaluate the short- and long-term response of human bone tissue to the insertion of dental implants and to corroborate the results of in vitro and of animal experimental studies is to study well-integrated human-retrieved dental implants, with surrounding human bone tissue, possibly after different time periods after the insertion in the bone. Several papers report that moderately rough implant surfaces are, probably, the best in terms of mineralized tissues response at the bone-implant interface. Results from our Laboratory, in a span of 30 years, have found that immediate loading did not create adverse effects regarding the formation of mineralized tissues at the interface with dental implants and has, probably, a beneficial effect on the peri-implant bone response, producing changes in the peri-implant bone microstructure. Osseointegration is a very dynamic ongoing process with the peri-implant bone tending to become more organized over the years; these higher degrees of organization are reflected by the large quantity of remodeling areas in the mature, lamellar bone, indication of multiple remodeling cycles over the years of loading. Bone remodeling is a prerequisite for dental implants to support functional loading in the long term, and remodeling, very well-organized, mineralized, lamellar bone is found at the interface of retrieved implants even after three decades of loading. Bone-implant contact (BIC) and bone mechanical properties were found to increase over time, and the bone tissue adapted to loading conditions to increase its biomechanics. In the specimens evaluated in our Laboratory, high percentages of bone-implant contact was found in all well-integrated retrieved implants, with the presence of mineralized, mature, lamellar bone in close contact with the metal surface, around all the implant perimeter, with no epithelium migration downward or presence of fibrous, connective tissue. In the specimens evaluated in our Laboratory over several decades, the bone-implant contact percentage was found to vary from 32 to 37% to more than 90–95%. These results point to the fact that dental implants could function with different percentages of mineralized tissues at the interface, and even implants with a low bone-implant contact percentage were stable, well-integrated, and able to bear loading conditions over the years. Mineralized bone was absent at the base of the threads in unloaded implants, and, at the tip of the threads in loaded implants, osteocytes (the mechanosensors in bone) were always found in the peri-implant bone, with a significantly higher number in loaded implants than in unloaded implants. Loaded implants presented a significantly higher number and thickness of bone trabeculae.

Minimising marginal bone loss around dental implants is of paramount importance. The success of methods such as platform switching (PS) and laser-micro-texturing (LM) are well documented. Whether or not a combination of these designs will further improve outcomes has not been studied previously. Hence, this prospective, randomized controlled single-centre pilot study compared the clinical and microbiological outcomes of implants with both PS and LM (test) to implants with only LM (control). A test and control implant were placed in thirteen patients totalling 26 implants. The primary investigated outcome was marginal bone level (MBL), secondary outcomes were peri-implant probing depths (PPD), bleeding on probing (BOP) and marginal tissue height (MTH). Additionally, the presence of five putative periodontal pathogens were assessed using real-time polymerized chain reaction. At 12 months the overall implant survival rate was 95.8%. MBL change was not found to be different between test and control at any time points, but a significant change was detected within the test implants at 6 months compared to baseline (p = 0.006). No differences were found in the secondary outcomes. Average PPD at 12 months was 2.68 ± 0.73 mm and 2.30 ± 0.46 mm and average change in MTH was 0.05 ± 0.72 mm and −0.24 ± 0.59 mm at tests and controls. No differences were reported in BOP frequency. Total periodontal pathogens count revealed no significant difference among control, test implants and adjacent tooth sites. Within the limitations of this study, it can be concluded that the addition of PS to LM implants does not significantly alter either short-term clinical outcomes or the vulnerability to pathogenic microflora colonization.

Objective: A wide range of surgical techniques are available for maxillary sinus augmentation. This review aimed to determine which techniques have achieved the highest success rates and so offer the greatest predictability. Materials and methods: A systematic literature review was performed using the PubMed, MEDLINE, and Scopus databases, identifying clinical trials that assessed different surgical techniques for maxillary sinus augmentation, and registered the success rates of subsequent implant placement. Results: A total of 40 articles described clinical studies involving different maxillary sinus augmentation procedures with follow-up periods of at least 6 months after dental implant placement. Implant success rates varied between 94% and 100% during the follow-up periods. Conclusion: A wide variety of clinical techniques are available for maxillary sinus augmentation; the choice of the technique will depend chiefly on the characteristics of the edentulous site, which will permit or prevent the placement of the implant at the moment of sinus augmentation surgery. Sin financiación 1.107 JCR Q3, 67/790 Dentistry, Oral Surgery & Medicine UEM

This study aimed at a histologic and histomorphometric analysis of the periimplant tissues and bone-titanium interface reactions in successfully osseointegrated, clinically stable, and immobile human titanium dental implants retrieved after a long loading period.In the last 30 months (2013-2015), 21 implants, retrieved from individuals for different causes after a loading period ranging from 4 to 20 years, were sent to the Implant Retrieval Center, University of Chieti-Pescara, Italy. In 4 cases, almost all the bone had been lost during the retrieval, whereas in the remaining 17 cases, mineralized bone was still present.Around the majority of the implants, mature compact bone with few marrow spaces was found. The trabecular bone, constituted by a few thin bone trabeculae, was in a periimplant location around only a few implants. A high percentage of bone-implant contact (BIC) (comprised between 32 ± 4.1% and 83 ± 2.9%) was present. In almost all implants, the space within the threads was almost completely filled by compact lamellar bone or by a thin layer of bone. Close and tight contact between bone and implant surface was observed in all specimens with no gaps or connective tissue at the interface.All implants appeared to be well integrated in the surrounding mineralized bone, and all of them showed adequate bone-to-implant contact percentages.

OBJECTIVE To histologically evaluate hard and soft tissues adaptation at screw-shaped devices installed at recipient sites in the distal segments of the alveolar edentulous ridge prepared with a buccal bone width of 1 or 2 mm. MATERIAL AND METHODS Sixteen volunteers received 2 nonsubmerged titanium implants each; after 3 months, biopsies were obtained and processed for histology. The distances between implant shoulder (IS), top of the bony crest (C), coronal level of osseointegration (B), peri-implant mucosa (PM), and apical extension of the junctional epithelium (aJE) were measured. RESULTS There were no significant statistically differences between test and control sites regarding IS-C, IS-B, PM-IS, PM-B, PM-aJE, aJE-B measurements. The horizontal bone resorption 1 mm below IS was 0.3 ± 0.3 and 1.0 ± 0.7 mm at the test and control sites, respectively. This difference was statistically significant. CONCLUSIONS Similar hard and soft tissues dimensions were observed in both groups. However, a higher horizontal bone resorption was seen at the control sites. Nonsubmerged implant installation should be performed when a 1 mm buccal bony crest width is present so as to limit the horizontal bone resorption.

The aim of the present study was a histologic and histomorphometric analysis of the peri-implant tissue reactions and of the bone-titanium interface in successfully osseointegrated, clinically stable, and immobile retrieved titanium dental implants after a long loading period. Four successfully osseointegrated and stable implants with a sandblasted surface were retrieved from a patient due to fracture, two after 14 years of loading and two after 17 years. None of these implants has been previously reported. Mature, compact bone with a few marrow spaces was observed around all four implants. At low magnification, a high percentage of bone-implant contact (BIC) was present at the interface of almost all implants. BIC percentage for the four implants was 83%, 66%, 74%, and 65%. In almost all the implants, the space within the threads was almost completely filled by compact bone. Close, tight contact between bone and implant surface was observed in all specimens, and no gaps or fibrous connective tissue was found at the bone-implant interface. All implants appeared to be well integrated in the surrounding mineralized bone, and all showed adequate BIC percentages after a long loading history.

Background The aim of this study was to investigate for the first time the histological response of human periodontium to mineral trioxide aggregate (MTA) and Biodentine. Methods Six patients scheduled for implant full-arch rehabilitation were randomly assigned to one of the two test groups: MTA or Biodentine treatment. For each patient, two teeth scheduled for strategic extraction were randomly assigned either to the test or to the control treatment. A lateral perforation was drilled on the root and either repaired with MTA/Biodentine or filled with gutta-percha(control). Three months later, the teeth were extracted along with the coronal third of the alveolar bone and a portion of gingival tissue, while performing implant placement, and processed for histological analysis. Results Biodentine resulted in less extrusion into the periodontal environment. All the materials showed good biocompatibility. A new mineralized cementum-like tissue incorporating periodontal fibres was visible in all cases treated with MTA. A small amount of new mineralized tissue was found in two Biodentine cases but not in control cases. Biodentine resulted in less damage to the periodontal ligament. Conclusions Bioactivity and biocompatibility of MTA were confirmed in human models. Biodentine proved to be biocompatible, but it seems not to induce cementum regeneration.

OBJECTIVES The purpose of this study was to evaluate the peri-implant bone tissue level on postextractive resorbable calcium phosphate coated single implants placed in premaxillary sites grafted with autologous bone, anorganic bovine bone (ABB), platelet-rich plasma (PRP), and keratinized epithelial connective graft over 12 years. MATERIALS AND METHODS A total of 27 patients received a postextractive single implant in premaxillary sites grafted with ABB and PRP. Two months later, a keratinized epithelial connective graft was applied and the implants loaded. Clinical and radiographical evaluations were performed at baseline, 6 and 18 months, 4 and 6 years after the implant insertion, and then every 2 years up to the 12th year. RESULTS After 12 years, a total of 22 implants (81.48%), were available for the final data analysis; the implants achieved a 100% cumulative survival rate, and only a mild degree of periodontal tissue inflammation was recorded. The radiographic evaluation revealed a physiological marginal bone remodeling over the follow-up. CONCLUSION Although a good preservation of the residual bone tissue in postextraction implant sites treated with keratinized epithelial connective tissue grafts was observed, the low number of treated cases does not allow us to propose this experimental protocol to all cases of bone defects but it certainly represents a new option. Further studies on a greater number of patients and using implants with different surface characteristics should be conducted for a better understanding of the indications of the proposed treatment.

Objective In the present study, a new healing cap that could generate a pulsed electromagnetic field (PEMF) around titanium implants to stimulate peri-implant osteogenesis was tested in the rabbit model. Materials and methods A total of 22 implants were inserted in the proximal tibial metaphysis of 22 rabbits. A healing cap containing the active device was inserted in half of the implants (11 test implants); an “empty” healing cap was inserted in the other ones (11 control implants). The animals were euthanized after 2 and 4 weeks, and the samples were processed for micro-computed tomography and histology. The peri-implant volume was divided into coronal (where the PEMF was the strongest) and apical regions. Results Most of the effects of the tested device were confined to the coronal region. Two weeks post-implantation, test implants showed a significant 56% higher trabecular bone fraction (BV/TV), associated with enhanced trabecular number (Tb.N, +37%) and connectivity density (Conn.D, +73%) as compared to the control group; at 4 weeks, the PEMF induced a 69% increase in BV/TV and 34% increase of Tb.N. There was no difference in the trabecular thickness (Tb.Th) at either time point. Furthermore, we observed a 48% higher bone-to-implant contact (BIC) in the test implants vs. controls after 2 weeks; this increase tended to remain stable until the fourth week. Mature trabecular and woven bone were observed in direct contact with the implant surface with no gaps or connective tissue at the bone-implant interface. Conclusions These results indicate that the PEMF device stimulated early bone formation around dental implants resulting in higher peri-implant BIC and bone mass already after 2 weeks which suggests an acceleration of the osseointegration process by more than three times.

Evaluating primary stability is important to predict the prognosis of dental implant treatment. Primary stability is decreased in a low bone density site such as osteoporosis. However, it is difficult to apply in small animal and the effect of the different implant surface topography for the primary stability at low bone density site has not yet fully been investigated. The purpose of the present study was to evaluate the influence of implant surface topography on primary stability in a standardized osteoporosis animal model. Six rabbits underwent ovariectomy and administrated glucocorticoid to induce an osteoporosis model. Sham-operations were performed in additional six rabbits. Implants with machined or oxidized-surfaces were inserted into the femur epiphyses and insertion torque (IT) and implant stability quotient (ISQ) were measured. In sham model, the IT and ISQ did not differ significantly between the both implant. However, the IT value of oxidized-surface implant was significantly higher than that of the machined implant in the osteoporosis model. Meanwhile, ISQ did not significantly differ between the machined and oxidized-surfaced implants. In conclusion, the IT of implants is higher with rough than with smooth surfaces but that there are no differences in ISQ value between different surfaces in a standardized osteoporosis bone reduced rabbit model.

Background/purpose: The aim of the current in vitro study was to determine if there was a correlation between the integrals (I) of the function cutting resistance/depth, obtained using a computerized implant motor, and the bone-to-implant contact (BIC) percentages of dental implants inserted in bovine ribs. Materials and methods: Segments of bovine ribs were used, and a total of 21 perforations were performed. A total of 21 dental implants were inserted in the prepared bone sites. A computerized implant motor (“Torque Measuring Motor”) was used to assess, before implant insertion, the values of the bone cutting resistance. The data of bone density obtained by the implant motor were statistically correlated with the BIC percentages. Results: A significant positive linear correlation was found between the integrals measured by the implant motor and the BIC assessed by histomorphometry (r = 0.78, n = 21, P

The aim of this multicenter human clinical trial was to radiographically evaluate the marginal bone loss and to assess implant survival rate in patients treated using 2 different implant systems (Bio-Plant and Tuber-Plant) after 10 years of loading.Ninety-seven patients were selected, and 160 implants were inserted (72 Bio-Plant and 88 Tuber-Plant). Ten years later, 20 patients were lost at follow-up and 77 patients (126 implants; 67 Bio-Plant and 59 Tuber-Plant) were recalled. After 10-year, the periimplant bone resorption was significantly lower (P = 0.0039) for Tuber-Plant (0.74 ± 0.12 mm) than for Bio-Plant (1.31 ± 0.09 mm). The cumulative survival rate was 99.11%.Both implant systems demonstrated to be suitable for a long-term successful rehabilitation because of stable marginal bone levels and high survival rates after 10 years of functional loading.

Due to its antioxidant properties and its ability to detoxify free radicals, melatonin may interfere in the function of osteoclasts and thereby inhibit bone resorption. This inhibition of bone resorption may be enhanced by a reaction of indolamine in osteoclastogenesis and this may contribute to certain benefits in implantology.This systematic literature review on the use of melatonin in implant dentistry aims to provide guidelines for clinicians.PubMed, Science Direct, ISI Web of Knowledge, and the Cochrane base databases were used to identify articles published between 1999 and 2013 on melatonin use in implant dentistry. Ten articles were selected consisting of 9 animal research studies and 1 review article, involving 60 Beagle dogs, 57 rats, and 30 rabbits and a total of 352 implants.Melatonin, which is released into the saliva, has important implications in the oral cavity. To achieve dental implant stability, osseointegration involves a cascade of protein and cell apposition, vascular invasion, bone formation, and maturation. This process may be accelerated by local delivery of growth-promoting factors, as occurs with the topical application of melatonin over the implant surface.The experimental evidence suggests that topical applications of melatonin may be useful in oral surgery and implant dentistry, increasing bone-to-implant contact values and new bone formation, and so improving the success and long-term survival of implant treatments.

The aim of this study was to evaluate the stability of implant/interconnected porous calcium hydroxyapatite complex (implant/IPCHA-complex) under functional loading. Implant/IP-CHA-complexes were placed into the mandibles of four Beagle-Labrador hybrid dogs (complex-group). On the other side, an implant was placed directly (control-group). To subject the loading, the animals were fed a hard diet throughout the loading phase of 5 months. The implant stability quotients (ISQs) and bone implant contact (BIC), and histological evaluations were performed. The ISQs of implant/IP-CHA-complex was significantly lower at placement than that of the control-implant. On the other hand, there was no significant difference between in the groups during loading. The BIC measurements, there was no significantly difference between in both groups. Histologically, newly formed bone was observed in contact with most of the implant surface in the complex-group. An IP-CHA/implant-complex would be able to achieve both bone reconstruction and implant stability under functional loading conditions.

Purpose The aim of this study was to systematically review the literature on implant placement in sites of previously failed implants and to assess survival and success rates of the replacement implants to investigate the effectiveness of the procedure. Materials and methods MEDLINE and Cochrane Oral Health Group databases were used to identify articles published between 1985 and 2011. Six articles were selected for a total of 334 patients (338 implants). Results The survival rate ranged from 71% to 100%. The survival rate for implants placed for the second time (third attempt) in the sites of previously failed implants was 83.75%. No studies included in this review reported the cumulative success rate except for the prospective one, which reported a 93.7% success rate. The main limitations of the present systematic review have been the scarce number of patients and implants in the analyzed studies and the lack of large well-designed case-control long-term trials. Conclusions Survival rates of implants placed in the areas of previously failed implants are low, although they should not discourage clinicians from a second or even a third attempt.

Departments of Biomaterials and Biomimetics, and Periodontology and Implant Dentistry, New York University College ofDentistry, New YorkReceived 4 June 2013; revised 23 October 2013; accepted 4 January 2014Published online 00 Month 2014 in Wiley Online Library (wileyonlinelibrary.com). DOI: 10.1002/jbm.b.33109Abstract: Aims: It has been accepted that bone damage andsubsequent resorption occurs in cases of adverse interfacialbone strain. Fractured implants represents an importantopportunity for evaluating the bone response to overstrain.The objective of the study was to analyze the bone morphol-ogy and morphometry around retrieved fractured implants inhumans. Five fractured implants retrieved after 22.4 (6 2.8)years were used in the present study. The investigation wasconducted in a transmitted brightfield and circularly polarizedlight Microscope. The parameters considered were the totalbone area, total bone remodeling area, bone-remodeling rate(BRR), and bone transverse collagen fibers orientation (CFO).Findings: For grouped samples, the BRR was 51.9% (6 10)while the transverse CFO was 13.0% (6 9.7). The interthreadBRR was 58.1% (6 4.0) for level 1 and 40.4% (6 12.8) for level2 with a significant decrease in BRR (p50.019) as a functionof depth along the implant length.Conclusions: Both bone level and bone quality attains stabil-ity to a certain level with respect to implant neck fracture fol-lowing physiologic interaction between mechanical andbiological inputs. The BRR significantly decrease as functionof threads depth.

The aim of this study was to histologically and histomorphometrically analyze the peri-implant tissue reactions and the bone-titanium interface in loaded Ankylos implants retrieved after loading periods of longer than 1 year. The archives of the Implant Retrieval Center of the Dental School of the University of Chieti- Pescara were searched for Ankylos implants retrieved from humans after a loading period of longer than 1 year. A total of four implants were found: one had been retrieved after 3 years (Friadent plus surface), two after 3.5 years (Friadent plus surface), and one after 10 years (Deep Profile surface). All implants had been loaded; two had been loaded immediately. One implant was retrieved after fracture, one was retrieved after fracture of the superstructure, and the other two were retrieved because of bone resorption with or without infection. Compact bone with few small marrow spaces was present around the three implants retrieved after 3 and 3.5 years; trabecular bone was present around the implant retrieved after 10 years. The bone-implant contact of the three best threads was 35% for the implant retrieved after 10 years, 99% for the implant retrieved after 3 years, and 100% for the implants retrieved after 3.5 years. No untoward effects were present at the interface, and a high bone-implant contact was present around the implants with the microstructured surface. The data show that these implants had the potential to maintain osseointegration under long-term function with continuous and ongoing bone remodeling.

Background By mixing hydroxyapatite (HA) and tricalcium phosphate (TCP), biphasic calcium phosphate ceramics can be obtained, and by varying their ratio it is possible to tailor the characteristics of the biomaterial. Purpose The aim of the present human study was to evaluate the histological and radiographical aspects of bone formation in maxillary sinus augmentation using a 30/70 HA-beta-TCP with a reticular structure. Materials and Methods A total of 12 patients, undergoing two-stage sinus augmentation procedure using HA-beta-TCP at a ratio of 30/70, were included in the present study. After a 6-month healing period, during implant insertion, radiographical analysis was performed, and then the bone core biopsies were harvested and processed for histology. Results At radiographic evaluation, the bone gain was on average 6.85 ± 0.60 mm. HA-beta-TCP 30/70 appeared to be lined by newly formed bone, with no gaps at the interface. The histomorphometric analysis revealed 26 ± 2% of residual grafted biomaterial, 29 ± 3% of newly formed bone, and 45 ± 2% of marrow spaces. Conclusions The present results indicate histologically the high biocompatibility and osteoconductivity of HA-beta-TCP 30/70, and clinically its successful use for sinus augmentation procedures.

The aim of the present study is to perform a systematic review of the literature on the use of titanium grids for implant surgery before and simultaneously with implant placement and to assess the success rate of the procedure, as well as survival and success rates of implants placed in the regenerated areas.Medline was used to identify studies in English published from 1996 to 2011. An additional hand search was performed of the relevant journals and of the bibliographies of the papers identified. Articles retrieved by two independent authors were screened using specific inclusion criteria: randomized controlled trials (RCTs), controlled clinical trials, and prospective clinical studies regarding vertical and/or horizontal regeneration of the alveolar ridge using titanium grids, in association or not with biomaterials, before and simultaneously with implant placement.Six articles were selected, including a total of 79 patients, 87 titanium grids, and 141 implants. Twenty-four implants were placed simultaneously with titanium grids, and 117 implants were inserted after a period of 4 to 9 months. Titanium grids in combination with autogenous bone were used in 43 cases, 25 in combination with a mixture of autogenous bone and bone substitutes, 14 in association with bone substitutes, five using only titanium grids. The overall success rate of the regenerative procedures was 98.86%; the overall survival and success rates of implants were 100% and 93.2%, respectively.The main limit of the present systematic review is the scarcity of papers with an adequate and consistent methodology regarding the data collection and analysis and the lack of RCTs and large well-designed long-term trials. Survival and success rates of implants placed in the areas treated with titanium grids were comparable to those of implants placed in native, non-regenerated bone and of implants placed in bone regenerated with resorbable and non-resorbable membranes.

Purpose The purpose of the present preliminary in vitro study on bovine ribs was to validate a new intraoperative site-specific classification of bone Density Index (IDI), obtained by an innovative computerized implant motor, by correlating these data with the data obtained by the histomorphometrical evaluation of the same samples. Materials and Methods Five segments of bovine ribs were used, and a total of 22 perforations were performed. A computerized implant motor (“Torque Measuring Motor”) was used to evaluate the bone density, which was classified into four classes: ID1, ID2, ID3, and ID4. Histomorphometrical analysis of bone density, expressed as percentage of bony trabeculae over the total biopsy area, was also performed. The data of bone density obtained by the implant motor were statistically correlated with the histomorphometrical results. Results A significant positive correlation was found between the bone density measured by the implant motor and the bone density assessed by histomorphometry (r = 0.89, p

Purpose The present study aimed to assess clinical and biological performances of several bone substitute biomaterials (BSBs). Materials and Methods The evaluation was conducted at 6 months and after several years on 295 patients undergoing sinus augmentation with 13 different BSBs; the data belonging to previously published studies have been analyzed using innovative mathematical models to evaluate the bone regenerative index (Br) and the structural density index (Ds). Results After 6 months, compared to the Ds index of native bone, the regenerated bone showed a D3 bone type; while, after several years, the regenerated bone type was D2, with an evident increase in the density of the regenerated bone over time. Moreover, the values of Br were higher for combined biomaterials indicating a fewer amount of residual particles and marrow spaces, while the values of Ds were higher for anorganic bovine bone indicating a greater new bone formation and a lesser amount of marrow spaces. After 20 years, the bone regenerated using hydroxyapatite still had a D4 bone quality. Conclusions After 6 months of healing, the regenerated bone had a composite structure resembling poor D3 bone type, and covered approximately one-third of the space filled by BSBs. None of the evaluated biomaterials seemed to be ideal.

Analysis of human-retrieved implants provides a unique opportunity to evaluate osseointegration processes. There is evidence that faster bone apposition is present at textured surfaces, with a very high success percentage. Aim of the present retrospective analysis was an evaluation of 14 human retrieved from humans implants with a wettable, highly hydrophilic, microstructured surface.The archives of the Implant Retrieval Center of the Dental School, University of Chieti-Pescara, Italy, were searched, and a total of 14 implants FRIADENT plus surface (Dentsply Implants Manufacturing GmbH, Mannheim, Germany) retrieved after a loading period comprised between 4 and 8 weeks were found.Around all implants, newly formed bone was found in direct contact with the implant surface, with no connective fibrous tissue found at the interface. In all implants, no epithelial downgrowth was present. A very high bone-to-implant contact percentage was found.The efficacy of dental implants is related to biological and biomechanical stability and to the integration between the bone and the implant. This integration plays the key role in the fixation and anchoring of the implants.

Background Differences in implant microtexture are important in conditioning the bone response around dental implants. Purpose The aim of the present study was an evaluation of the bone response in machined (M), blasted with apatitic calcium phosphate (tricalcium phosphate/hydrossyapatite [HA] blend) particles (resorbable blast texturing [RBT]), and coated with HA implants. Methods A total of 48 (16 M, 16 RBT, and 16 HA) threaded screw-shaped implants were inserted into the tibia of 12 rabbits. The specimens were retrieved after 1, 2, 4, and 8 weeks and processed for histology. Results All experimental groups showed an increase of the bone-implant contact percentages through the study period. Higher and highly statistically significant differences were found in the percentages of bone observed in the concavities rather than in the convexities of the implants retrieved after 1, 2, and 4 weeks, while no significant differences were found after 8 weeks. In the different time periods, higher percentages of bone-implant contact were found in the RBT and HA-coated implants both in the concavities and in the convexities, but these differences were not statistically significant. Conclusions The newly formed bone present in the concavity of the threads was not influenced by the implant surface in the first healing period, while after 4 to 8 weeks, the percentage of bone observed in the concavities and convexities was similar. Additional histological studies are necessary to further evaluate the critical role of the concave geometry in bone differentiation and formation around dental implants.

Purpose To evaluate the clinical and histologic aspects of bone formation in maxillary sinus augmentation using macroporous biphasic calcium phosphate (MBCP) comprising hydroxyapatite/tricalcium phosphate (HA/TCP) 60/40 as bone-grafting material. Materials and methods A total of 10 patients and 12 sinuses grafted with MBCP in two-stage sinus augmentation were included in the present study. After a healing period of 6 months, bone core biopsies were harvested during implant insertion and evaluated under light microscopy. Results The histologic examination showed that the MBCP particles were in close contact with new bone in all biopsies. Histomorphometric evaluation demonstrated that newly formed bone constituted 28.3% ± 2.7%, residual grafted material 27.3% ± 1.2%, and marrow spaces 45.9% ± 1.9%. Conclusions Histologic investigation showed that the MBCP grafted particles were embedded and integrated in the newly formed bone; this bone was in close and tight contact with the biomaterial particles. Data from the preliminary results demonstrated that MBCP is a biocompatible and osteoconductive material that can be successfully used as a grafting material for sinus floor augmentation.

Sinus augmentation procedure has been demonstrated to be a highly predictable treatment in posterior maxilla atrophy. All the surgical interventions in the maxillary region require deep knowledge of anatomy and possible anatomical variations. In this article, pre-operative and post- operative assessments of sinus cavity as well as novel approaches to deepen our knowledge of the behavior of bone substitute materials are described. The awareness of the patient's morphologic conditions enables exact planning of invasive surgery and aids to avoid complications. Pre- operative radiologic evaluation of the region before sinus lift is advisable both for a planning of the sinus augmentation and for selection and alignment of the optimum placement of implants. On the orthopantomography it is possible to measure the vertical dimension of graft, but not the volume and 3D changes. Cone-beam computed tomography (CBCT) has become the "gold standard" to plan a comprehensive implant treatment and to achieve a post-operative assessment. A computer-aided design/computer-aided manufacturing (CAD/CAM) technique is proposed to produce custom-made block grafts for sinus lift procedure, and a customized cutting guide to accurately place the lateral wall and ease membrane elevation. This procedure allows to reduce intervention time, to precisely adapt the scaffold, to reduce risk of complications and to improve operation quality. Recently, a novel approach has been used to deepen our knowledge of the behavior of BSBs: by means of synchrotron micro-tomography (SCT). It is a 3-D analyzing method, suitable to examine the dynamic and spatial arrangement of regenerative phenomena in complex anatomical structures such as bone, where tissues with several morphologies (alveolar process, unmineralized extracellular matrix, regenerated vessels, etc.) compete to achieve the final goal of bone regeneration.

The anatomical remodeling technique (ART) was proposed to place postextraction implants with the aid of specific osteotomes. This study is a clinical and radiographic evaluation with 10-year follow-up of anterior postextraction single implants placed with the ART and immediately restored.Thirty-five patients, with a hopeless tooth in the anterior maxilla, were included in the study and 35 implants were inserted according to the ART. Clinical and radiographic evaluations were performed at baseline (T0), after 6 (T1) and 14 months (T2), 4 years after surgery (T3) and every other year up to the 10-year follow-up (T4, T5, and T6). Implant success, survival, and failure rates were evaluated according to the International Congress of Oral Implantologists Pisa Consensus Conference criteria.Twenty-nine patients and 29 implants were available for the 10-year data analysis. After 10 years, the accumulated mean marginal bone loss was 2.69 ± 0.42 mm. The cumulative survival rate of the implants was 100%.Immediately loaded postextractive implants, placed according to the ART, have been proved to be a predictable method to rehabilitate single tooth in the anterior maxilla.

The presence of a microgap between implant and abutment could produce a bacterial reservoir which could interfere with the long-term health of the periimplant tissues. The aim of this article was to evaluate, by x-ray 3-dimensional microtomography, implant-abutment contact surfaces and microgaps at the implant-abutment interface in different types of implant-abutment connections.A total of 40 implants were used in this in vitro study. Ten implants presented a screw-retained internal hexagon abutment (group I), 10 had a Morse Cone taper internal connection (group II), 10 another type of Morse Cone taper internal connection (group III), and 10 had a screwed trilobed connection (group IV).In both types of Morse Cone internal connections, there was no detectable separation at the implant-abutment in the area of the conical connection, and there was an absolute congruity without any microgaps between abutment and implant. No line was visible separating the implant and the abutment. On the contrary, in the screwed abutment implants, numerous gaps and voids were present.The results of this study support the hypothesis that different types of implant-abutment joints are responsible for the observed differences in bacterial penetration.

Objective To perform an immunohistochemical evaluation of microvessel density (MVD), vascular endothelial growth factor (VEGF) and nitric oxide synthase (NOS) expression in mandibular ridge regeneration using an equine-derived bone substitute. Materials and methods Ridge augmentations were performed in six patients using equine bone. After a six-month healing period, four bone cores from no augmented (control) and four from augmented sites (test) were retrieved and processed for immunohistochemistry. Results Statistically, significant differences were found in the MVD expression between control and test sites (p Conclusions Within the limits of the small sample size, the present study indicated that equine bone is able to support neovascularization when used as a grafting material.

Background: The aim of the present randomized controlled clinical trial was to assess the bucco-lingual bone changes of implants immediately placed in fresh extraction sockets in association or not with porcine bone. Methods: Forty patients were included in the present study, and were randomly assigned to the control (n = 20) and test (n = 20) groups. Each patient received a single implant placed into an immediate extraction site of a molar or a first upper premolar with a flapless approach. In the control sites no grafting material was placed, while in the tests a deantigenated collagenated bone substitute of porcine origin was used to fill the gaps between the implant and the extraction socket. The bucco-lingual bone width was measured at different time points: at the time of surgery (T0), at 90 days (T1), at 110 days (T2) and after 6 months of masticatory function (T3). The values were statistically analyzed between and within the treatment groups (p0.05). Results: All the implants were osseointegrated. Four control implants were excluded from the analysis due to the exposure of the coronal portion of the fixture. At T1, T2 and T3, statistically significant differences were found by comparing the mean width of the bucco-lingual bone between control and test groups. The mean values decreased during the observation period in both groups; statistically significant differences within controls were detected at T1, T2 and T3, and at T2 and T3 within tests. Conclusions: The outcomes of present study suggested that porcine bone enabled to avoid bucco-lingual crestal bone changes in implants immediately placed in fresh extraction sockets.

Background Implant stability is one of the key factors for a successful osseointegration. At present, several techniques are available to regenerate bone tissue, but it is not clear whether implants placed in grafted bone are as stable as implants in native bone over time. Purpose The aim of the present study was to compare, by means of resonance frequency analysis (RFA), the stability of implants placed in sinus-grafted and -nongrafted sites during 12-month follow-up. Methods Twenty-five patients received a total of 38 implants. Nineteen implants were placed in maxillary native bone (group A) and 19 implants following maxillary sinus floor augmentation using anorganic bovine bone and autogenous bone (group B) in a 50:50 ratio. Group B was divided into groups B1 and B2 depending on the timing of implant insertion, that is, B1 simultaneously and B2 6 months after sinus lift. The implants were inserted according to a two-stage procedure. RFA values were collected at baseline, 6 and 12 months after implant placement. Results Between the tested groups, no statistically significant difference was found in RFA values of implants placed in sinus-grafted and -nongrafted sites after the surgery as well as at 6 and 12 months, while a significant difference was recorded in group B1 (p = .0297) when RFA values were compared over time. Conclusions The results of the present study suggest that regenerated bone can offer good stability for dental implants.

To evaluate, in vitro, the leakage observed in internal hexagon and Morse taper implant-abutment connections.Ten specimens with internal hexagon and 10 with Cone Morse connection were used. The inner parts of 5 implants, per group, were inoculated with Pseudomonas aeruginosa (PS) suspension and 5 implants, per group, with Aggregatibacter actinomycetemcomitans (AA). The penetration of bacterial suspension into the surrounding solution was determined by observation of turbidity of the broth.In the internal hexagon implants, bacterial contamination was found in 2 of 5 implant-abutment assemblies seeded with the PS, and in the assemblies seeded with AA, the contamination was found in 3 samples, with a total of leaked assemblies in this group in 5 of 10. In the Cone Morse implants, bacterial contamination was found in 2 of 5 implant-abutment assemblies seeded with the PS, whereas in the assemblies seeded with AA, no contamination was found, with a total of leaked assemblies in 2 of 10.The data support a not significantly higher permeability to bacterial leakage and a lower infiltration rate of screw-retained abutment connections when compared to Cone Morse taper internal connections.

Coating characteristics of dental implants such as composition and topography regulate cell response during implant healing. The aim of this study was to assess how surface topography can affect osteogenic differentiation of mesenchymal stem cells (MSCs) by analyzing the expression levels of bone-related genes and MSCs marker. Thirty disk-shaped, commercially pure Grade 2 titanium samples (10 × 2 mm) with 3 different surface topographies (DENTSPLY-Friadent GmbH, Mannheim, Germany) were used in the present study: 10 Ti machined disks (control), 10 Ti sandblasted and acid-etched disks (DPS(®)) and 10 sandblasted and acid-etched disks at high temperature (Plus(®)). Samples were processed for real-time reverse transcription-polymerase chain reaction (RT-PCR) analysis. By comparing machined and Plus(®) disks, quantitative real-time RT-PCR showed a significant reduction of the bone-related genes osteocalcin (BGLAP) and osteoblast transcriptional factor (RUNX2). The comparison between DPS(®) and Plus(®) disks showed a slight induction of all the genes examined (RUNX2, ALPL, COL1A1, COL3A1, ENG, FOSL1, SPP1, and SP7); only the expression of BGLAP remained stable. The present study, demonstrated that implant surface topography affects osteoblast gene expression. Indeed, Plus(®) surface produces an effect on MSCs in the late differentiation stages.

The aim of the present study was to perform a comparative histological and immunohistochemical evaluation of microvessel density, vascular endothelial growth factor, and nitric oxide synthase (NOS) expression in sinus augmentation using autologous bone alone or in combination with equine bone.Sixteen patients underwent sinus augmentation with autologous bone and a 50:50 mixture of autologous and equine bone. Control cores were harvested from preexisting nonaugmented bone under the sinus floor. The specimens were processed for immunohistochemistry.The greatest values of microvessel density were found in the sites grafted with autologous bone with significant differences between control versus autologous group (P0.01) and control versus autologous + equine group (P0.01). The higher and lower intensities of vascular endothelial growth factor and NOS3 expression were prevalent in the sites grafted with autologous bone with significant differences with the controls (P0.05). No significant differences (P0.05) were found in the NOS1 expression among the groups.The results obtained showed that the mixture of autologous and equine bone was biocompatible, and its use was associated with new blood vessels ingrowth during healing, which has been found to be extremely important for bone formation.

Stability of peri-implant crestal bone plays a relevant role relative to the presence or absence of interdental papilla. Several factors can contribute to the crestal bone resorption observed around two-piece implants, such as the presence of a microgap at the level of the implant-abutment junction, the type of connection between implant and prosthetic components, the implant positioning relative to the alveolar crest, and the interimplant distance. Subcrestal positioning of dental implants has been proposed to decrease the risk of exposure of the metal of the top of the implant or of the abutment margin, and to get enough space in a vertical dimension to create a harmoniously esthetic emergence profile.The present retrospective histologic study was performed to evaluate dental implants retrieved from human jaws that had been inserted in an equicrestal or subcrestal position. A total of nine implants were evaluated: five of these had been inserted in an equicrestal position, whereas the other four had been positioned subcrestally (1 to 3 mm).In all subcrestally placed implants, preexisting and newly formed bone was found over the implant shoulder. In the equicrestal implants, crestal bone resorption (0.5 to 1.5 mm) was present around all implants.The subcrestal position of the implants resulted in bone located above the implant shoulder.

Background: Bone substitutes, such as allografts, xenografts, and alloplasts, have been proposed in several augmentation procedures. Purpose: The aim of the present study was a histologic and histomorphometric evaluation of specimens retrieved 4 or 6 months after sinus augmentation using cortical porcine bone augmentation material. Materials and Methods: A total of 77 specimens, retrieved after 4 and 6 months from augmented sinuses, were used in this study. The specimens were processed to be observed under light microscopy. Histomorphometric measurements were presented as means ± standard deviations. Results: Most of the particles were surrounded by newly formed bone with large osteocyte lacunae. Histomorphometry showed that, after 4 months, the newly formed bone represented 28%, marrow spaces 36%, the residual graft material 37%, while, after 6 months, the newly formed bone represented 31%, marrow spaces 34%, while the residual graft material was 37%. Conclusion: The present results show that cortical porcine bone is a biocompatible, osteoconductive biomaterial that can be used for maxillary sinus augmentation procedures without interfering with the normal reparative bone processes.

The long-term high percentages of survival and success of dental implants reported in the literature are related mainly to new, innovative implant and thread designs, and new implant surfaces that allow to obtain very good primary and secondary stability in most anatomical and clinical situations, even in low quality and quantity of bone, promoting a more rapid osseointegration. The aim of this retrospective study was a histological and histomorphometrical evaluation of the bone response around implants with a parallel-wall configuration, condensing thread macrodesign, and self-tapping apex, retrieved from man for different causes. A total of 10 implants were reported in the present study, and these implants had been retrieved after a loading period comprised between a few weeks to about 8 years. Mineralized newly formed bone was found at the interface of all the implants, in direct contact with the implant surface, with no gaps or connective fibrous tissue. This bone adapted very well to the microirregularities of the implant surface. Areas of bone remodeling were present in some regions of the interface, with many reversal lines. High bone-implant contact percentages were found. In conclusion, both the macrostructure and the microstructure of this specific type of implant could be very helpful in the long-term high survival and success implant percentages.

This immunohistochemical study evaluated the inflammatory infiltrate with its cluster differentiation markers (CD 4, CD 8, CD 20, and CD 68) in aggressive and chronic periodontitis gingival tissues in order to identify the specific cell distribution. Twenty-seven human gingival biopsies were obtained and analyzed. Fourteen patients were suffering from chronic periodontitis and six from aggressive periodontitis; seven patients with healthy gingiva were included as the control group. The specimens were immunohistochemically stained for anti-CD 4 (T helper cells), anti-CD 8 (T cytotoxic/suppressor), anti CD-20 (B plasma cells) and anti CD-68 (macrophages). Chronic periodontitis samples were mainly dominated by CD 4 and CD 8+ cells. On the contrary, in aggressive periodontitis patients all four cell types (CD 4, CD 8, CD 20 and CD 68 + cells, respectively) were remarkably increased. CD 20+ cells were significantly (p < 0.05) more prevalent in aggressive versus chronic periodontitis. The control samples expressed lower CD 4, CD 8, CD 20 and CD 68+ cells confirming a none inflammatory state. The present study demonstrates prevalence for CD 20+ cells in aggressive periodontitis lesions. However, further studies need to be performed to confirm and identify a clear pattern of inflammatory cells and hereafter the mechanisms sustaining the disease.

Background: Clinical, radiographical, and histological findings have shown that immediately loaded implants show the presence of mineralized tissues at the interface. Purpose: The aim of this study was to compare an immediate loading protocol with a two-staged one using an implant with a square thread design. Materials and Methods: One hundred fifty-five consecutive patients (71 men, 84 women), aged between 18 and 78 years (mean: 54 years) participated in this study. A total of 550 implants (Maestro; BioHorizons, Birmingham, AL, USA) were inserted. In group A, 264 implants were inserted in 82 patients with immediate functional loading with occlusal contact if the patients were completely edentulous, or with immediate nonfunctional loading without occlusal contact if the patients were partially edentulous. In group B, 286 implants were inserted in 73 patients with a one-stage or two-stage surgical procedure. All patients were followed for at least 5 years. Results: In the immediately loaded implants group, three implants failed, all in posterior mandibular sites, with an overall 98.8% 5-year survival rate. In the control group, no implant failed, with a 100% 5-year survival rate. No statistically significant differences were found in the survival rates of the implants in the two groups. Discussion: A very high implant survival rate was also present in our series for the immediately loaded implants. All the three failed implants were retrieved from the same patient, who had poor oral hygiene, after a loading period of 5 years. These data can suggest that, from a clinical point of view, an abbreviated healing period is compatible with the development and maintenance over a longer time period (5 years) of mineralized tissues at the interface with dental implants. Conclusion: We can then conclude that shorter healing periods can be highly satisfactory from a clinical point of view.

Purpose: Immediate loading of dental implants inserted into fresh postextraction sites has recently been proposed as a novel but challenging surgical approach. However, histological evidence and comparative data are still missing. The aim of this study was an histological and histomorphometrical comparison of submerged and immediately loaded dental implants with a new modified acid etched surface inserted into postextraction sites of nonhuman primates. Materials and Method: Thirty-two implants were placed in postextraction sockets of 4 adult Chacma Baboons (papio ursinus). Each baboon received 8 implants: 4 submerged and 4 immediately loaded. The implants were retrieved after 90 days of healing with a 4-mm trephine bur and processed for histology and histomorphometry. Results: The bone-to-implant contact percentage in the submerged and immediate loaded implants was 86.02% and 86.85%, respectively, with no statistically significant differences. In the immediately loaded implants a greater amount of ongoing remodeling was observed. Conclusions: Immediate loading seemed to be a valid alternative to conventional technique when a implant is inserted into postextraction sockets. Further comparative studies on a greater number of samples are necessary to confirm our findings.