Search

To produce pulses with good flat-top quality, pulse-forming lines (PFLs) have been widely used in the field of Tesla-type pulse generators. To shorten the physical length of the PFL, a double-width PFL (DWPFL) is proposed that doubles the output pulse width while maintaining flat-top quality. A repetitively 10 GW Tesla-type long-pulse generator producing pulses with flat-top width of about 110 ns was developed with a coaxial DWPFL to produce high-current electron beams. Electron beams of about 10 GW with flat-top widths of about 110 ns were obtained on a planar vacuum diode load. With this pulse generator and a C-band high-power microwave system, microwaves of ~2.2 GW power and full-width at half-maximum of 101 ns were generated. The experiment demonstrates the feasibility and ideal output waveform quality of the DWPFL.

A 10-GW high-energy-density Tesla-type pulse generator is developed with an improved insulating liquid based on a modified Tesla pulser-TPG700, of which the pulse forming line (PFL) is filled with novel insulating oil instead of transformer oil. Properties of insulating oil determining the stored energy density of the PFL are analyzed, and a criterion for appropriate oil is proposed. Midel 7131 is chosen as an application example. The results of insulating property experiment under tens-of-microsecond pulse charging demonstrate that the insulation capability of Midel 7131 is better than that of KI45X transformer oil. The application test in Tesla pulser TPG700 shows that the output power is increased to 10.5 GW with Midel 7131. The output energy density of TPG700 increases for about 60% with Midel 7131.