Search

Phosphorus (P) is an essential nutrient required for plant growth and at the same time a costly pollutant, which can cause eutrophication of water bodies. Modern agriculture relies heavily on mineral fertilisers, which contain phosphorus derived from phosphate rock, because, without regular applications, crop yields would be limited. Since phosphate rock is a non-renewable resource, there are growing concerns regarding future phosphorus scarcity and the sustainability of modern agriculture. For many farmers, animal manure was once a means of maintaining soil fertility, but now it presents a major operational problem. This study evaluated the possibility of recycling phosphorus on a national and regional scale in Italy, using major sources of manure and wastewater. These results were successively compared with an estimate of the agricultural demand for phosphorus. Considering the quantity of phosphorus fertilizer that was applied to the soil–plant system, for the years 2001–2010, the annual phosphorus requirement of Italian crops was about 101,000 t of P. Therefore, the phosphorus source comprising animal manure and civil/industrial waste (117,500 t of P and 40,000 t of P, respectively) could potentially satisfy the average annual agronomic phosphorus demand. Regarding the geographical distribution of phosphorus supply and demand on a regional scale, areas with a large deficit of phosphorus included Calabria, Puglia and Marche. However, when only livestock waste was considered, Sicily, Umbria and Friuli could also be considered to be regions experiencing a phosphorus deficit.

Landfill is still the main technological facility used to treat and dispose municipal solid waste (MSW) worldwide. In developing countries, final dumping is applied without environmental monitoring and soil protection since solid waste is mostly sent to open dump sites while, in Europe, landfilling is considered as the last option since reverse logistic approaches or energy recovery are generally encouraged. However, many regions within the European Union continue to dispose of MSW to landfill, since modern facilities have not been introduced owing to unreliable regulations or financial sustainability. In this paper, final disposal activities and pre-treatment operations in an area in southern Italy are discussed, where final disposal is still the main option for treating MSW and the recycling rate is still low. Mechanical biological treatment (MBT) facilities are examined in order to evaluate the organic stabilization practices applied for MSW and the efficiencies in refuse derived fuel production, organic waste stabilization and mass reduction. Implementing MBT before landfilling the environmental impact and waste mass are reduced, up to 30%, since organic fractions are stabilized resulting an oxygen uptake rate less than 1600 mgO2 h−1 kg−1VS, and inorganic materials are exploited. Based on experimental data, this work examines MBT application in contexts where recycling and recovery activities have not been fully developed. The evidence of this study led to state that the introduction of MBT facilities is recommended for developing regions with high putrescible waste production in order to decrease environmental pollution and enhance human healthy.

In literature, an effective method enabling the classification, based on a single indicator, of habitats that need a priority protection intervention has not been identified yet. Moreover, the excessive number of landscape metrics, used to quantify integrity of habitats, can cause confusion, often providing redundant and inconsistent results. The aim of this work is to develop a method for evaluating the ecological vulnerability of the habitats in sites of high biodiversity conservation interest. In the first phase, we selected and analyzed, by using principal component analysis (PCA) and fuzzy logic, the landscape metrics, in order to obtain the map of the intrinsic ecological vulnerability index. In the second step, the result of this intrinsic vulnerability was connected, through another fuzzy model, to anthropogenic impacts, obtaining the integrated ecological vulnerability index. We developed specific spatial indicators (landscape metrics), which can examine the mutual position and morphology of the habitats present, along with indicators of human pressure, related to the type and intensity of use of the anthropic territory, with reference to the habitat itself as well as to the areas immediately adjacent. The developed fuzzy models are innovative, compared to the current ecological studies, and examine landscape metrics as well as the impact of human activities. The case study is the “Val Basento-Ferrandina Scalo” Site of Community Importance, Ferrandina-SCI (Basilicata Region, Southern Italy). The results allowed us to build a rank of the habitats based on their intrinsic and integrated ecological vulnerability. Moreover, the results show that, in the Ferrandina-SCI, the most important source of concern is not human activities, but rather the inherent risk of ecological fragility caused by geographical and landscape features of the different patches of habitats themselves. This model aims to be a tool for decision support in sustainable landscape management. It is easy to use and to apply on other regions, although it should always be accompanied by a sensitivity analysis to reduce the subjectivity.

The efficiency of aeration systems should be monitored to guarantee suitable biological processes. Among the available tools for evaluating the aeration efficiency, the off-gas method is one of the most useful. Increasing interest towards reducing greenhouse gas (GHG) emissions from biological processes has resulted in researchers using this method to quantify N2O and CO2 concentrations in the off-gas. Experimental measurements of direct GHG emissions from aerobic digesters (AeDs) are not available in literature yet. In this study, the floating hood technique was used for the first time to monitor AeDs. The floating hood technique was used to evaluate oxygen transfer rates in an activated sludge (AS) tank of a medium-sized municipal wastewater treatment plant located in Italy. Very low values of oxygen transfer efficiency were found, confirming that small-to-medium-sized plants are often scarcely monitored and wrongly managed. Average CO2 and N2O emissions from the AS tank were 0.14 kgCO2/kgbCOD a...

Groundwater is an important source of water. Since the control and removal of pollution are expensive, it is essential to identify the possible sources of contamination and to correctly classify groundwater on the basis of its intrinsic and integrated vulnerability. In the last years, many fuzzy models have been developed. There is a lack, however, of studies concerning the application of fuzzy logic for the assessment of the susceptibility of groundwater quality to anthropogenic activities and comparing these methods with traditional methods. The fuzzy model described in this paper assesses the aquifer integrated environmental vulnerability connected to the presence of illegal dumpsites and allows us to hierarchically classify them within a hazard scale. The results allowed us to carry out a comparison of the proposed fuzzy method with a traditional method. The fuzzy method proved to be a useful and objective tool for environmental planning.

The increasing interest towards climate change, water and energy saving, and soil protection has led the research community to consider non-conventional water as a sustainable source for irrigation of energy crops. Vegetation filter systems are considered a reliable technique for sustainable biomass cultivation, enabling the use of reclaimed wastewater as water and nutrients sources during irrigation periods. In this study, a geographic information system (GIS)-based spatial model was developed to identify areas potentially suitable for creating vegetation filter systems with poplars to size the plants of energy production. An economic assessment allowed us to identify the cost-effectiveness areas for biomass production that can be fertigated by reclaimed wastewater. Considering the Basilicata region as the test region, a surface area of 258,512 ha was investigated, identifying 73,331 ha of SRF soils sited downstream of 45 wastewater treatment plants (WWTPs). However, considering only areas that have positive net present value and are economically attractive, results indicate 1606 ha of SRF falling within the areas of influence of 39 WWTPs. The results show that the sector of dedicated crops, adjacent and linked with WWTPs, expresses a total capacity of 50.56 MW for thermal, 8.25 MW for electricity, and 31 MW for cogeneration (25.07 MWt and 5.94 MWe) plants.

Wood pellet heating systems are considered as an essential component of European plans to reduce greenhouse gas (GHG) emissions. The goal of this analysis was to estimate and compare the environmental impacts and the costs of the production of packed wood pellets. Two pellet production systems, using roundwood logs (case 1) and mainly sawdust (case 2), have been analysed in 2015 in Basilicata region (Southern Italy). A life cycle assessment (LCA) analysis was applied to calculate the environmental impact indicators of each system, whilst a life cycle cost (LCC) analysis was implemented to evaluate the pellets’ cost production. Hence, the functional unit chosen was 1 t of produced pellets. The system boundaries considered for the purpose of the current investigation were from the tree felling to the pellet packaging. In particular, the following activities were considered: motor-manual felling and delimbing with a chainsaw, timber yarding with a tractor along the forest track, loading and transportation of the logs to the collection point, transportation of timber to the factories for a distance of 35 km, pellet production and pellet packaging in low-density polyethylene bags with a total weight of 15 kg bag−1. The production of 1 t of pellets emitted about 83 kg of CO2eq in case 1 and 38 kg in case 2. In addition, 2.7 kg of SO2eq and 0.005 kg of PO3 4-eq were produced in case 1 and 1.4 kg of SO2eq and 0.002 kg of PO3 4-eq in case 2. Mineral extraction was equal to 0.9 MJ surplus energy in both cases. Case 1 led to higher environmental impacts (about 50% more), essentially for the operation of pelletisation, and in particular for the higher consumption of electricity that characterised it, whereas the production costs were 172 and 113 € t−1 in case 1 and case 2, respectively. In both study cases, consumption costs (costs for raw material, electricity consumption, fuel usage) were the most important cost items. Our studies highlight how, in both cases, the operations carried out in the forest produced the minor part of the environmental impact but, at the same time, were the most expensive operations. Further, our studies show how mixing lumbering by-products (sawdust) and forest management products (lumbers) can be an efficient solution to reduce both manufacturing costs and environmental impacts to produce wood pellets.

The aim of this work is the evaluation of the efficiency of such a biofilter, through the application of a mathematical model which describes the biological oxidation process. This mathematical model is able to predict the efficiency of the system under varying operating conditions. Literature data have been used in order to build the model. The factors that mostly affect the process and which actually regulate the entire process have been highlighted in this work. Specifically, it was found that temperature, flow and methane concentration are the most important parameters that influence the system. The results obtained from the mathematical model showed also that the biofilter system is simple to implement and manage and allows the achievement of high efficiency of methane oxidation. In the optimal conditions for temperature (between 20-30°C), residence time (between 0.7-0.8 h) and methane molar fraction (between 20-25%) the efficiency of methane oxidation could be around 50%.

The present study addresses the theme of recycling potential of old open dumpsites by using landfill mining. Attention is focused on the possible reuse of the residual finer fraction (4 mm), which constitutes more than 60% of the total mined material, sampled in the old open dumpsite of Lavello (Southern Italy). We propose a protocol of analysis of the landfill material that links chemical analyses and environmental bioassays. This protocol is used to evaluate the compatibility of the residual matrix for the disposal in temporary storages and the formation of "bio-soils" to be used in geo-environmental applications, such as the construction of barrier layers of landfills, or in environmental remediation activities. Attention is mainly focused on the presence of heavy metals and on the possible interaction with test organisms. Chemical analyses of the residual matrix and leaching tests showed that the concentration of heavy metals is always below the legislation limits. Biological acute tests (with Lepidum sativum, Vicia faba and Lactuca sativa) do not emphasize adverse effects to the growth of the plant species, except the bioassay with V. faba, which showed a dose-response effect. The new developed chronic bioassay test with Spartium junceum showed a good adaptation to stress conditions induced by the presence of the mined landfill material. In conclusion, the conducted experimental activities demonstrated the suitability of the material to be used for different purposes.

In recent years, the replacement of natural raw materials with new alternative materials, which acquire an economic, energetic and environmental value, has gained increasing importance. The considerable consumption of water has favoured the increase in the number of drinking water treatment plants and, consequently, the production of drinking water sludge. This paper proposes a protocol of analyses capable of evaluating chemical characteristics of drinking water sludge from surface water treatment plants. Thereby we are able to assess their possible beneficial use for geo-environmental applications, such as the construction of barrier layers for landfill and for the formation of "bio-soils", when mixed with the stabilized organic fraction of municipal solid waste. This paper reports the results of a study aimed at evaluating the quality and environmental aspects of reconstructed soils ("bio-soil"), which are used in much greater quantities than the usual standard, for "massive" applications in environmental actions such as the final cover of landfills. The granulometric, chemical and physical analyses of the sludge and the leaching test on the stabilized organic fraction showed the suitability of the proposed materials for reuse. The study proved that the reuse of drinking water sludge for the construction of barrier layers and the formation of "bio-soils" reduces the consumption of natural materials, the demand for landfill volumes, and offers numerous technological advantages.

The present article is aimed at illustrating a methodology for a rapid and effective assessment of pollution hazard connected with the presence of uncontrolled landfills. In particular, by means of a fuzzy approach, the criterion adopted allowed a comparison of the results obtained from a cross analysis of some intrinsic characteristics of the single landfills and the territory where they are located. Their identification shows the most relevant environmental problem. Therefore, we have classified each site within a hazard scale enabling us to understand which one requires to be checked more urgently, to do instrumental surveys and, if needed, to do restoration and reclamation. Moreover, the sensitivity analysis we carried out allowed us to identify which is the best membership function belonging and which is the best defuzzification method. That is, in particular, the trapezoidal function and the centroid method. The proposed fuzzy approach, supported by the sensitivity analysis, has revealed to be an important tool for supporting decisions, in order to optimise technical and economic resources.