Search

During dissection for oral cancer, there is a high probability of bacteria indigenous to the oral cavity migrating to the surgical field in the neck due to the opening of new pathways of communication with the oral cavity. The risk of postoperative surgical site infection (SSI) in such patients is high due to malnutrition arising from perioperative eating disorders and dysphagia. Neck infections after neck dissection in oral cancer patients were investigated to elucidate the development of SSIs and their relationship with the results of bacterial culture.A total of 86 patients with oral squamous cell carcinoma who underwent neck dissection between January 2012 and December 2016 were enrolled. Ten factors were selected for investigation: (1) sex; (2) age; (3) primary site; (4) type of dissection; (5) whether or not there was a new pathway of communication between the oral cavity and the neck; (6) operative time; (7) blood loss; (8) number of drainage days; (9) amount of drainage at the time of drain removal; and (10) whether or not there was an SSI. Bacteria isolated from the catheter tip on drain removal were also investigated. Significant differences were observed between patients with and without SSIs (p-0.010) according to the presence of a new pathway of communication between the oral cavity and the neck (p-0.004); operative time (p-0.007); number of drainage days (p-0.029); or the amount of drainage at the time of drain removal. The present results indicate that selecting antibiotics appropriate to each patient and administering perioperative oral care are important in preventing SSIs.

Background In daily practice, three-dimensional patient-specific jawbone models (3D models) are a useful tool in surgical planning and simulation, resident training, patient education, and communication between the physicians in charge. The progressive improvements of the hardware and software have made it easy to obtain 3D models. Recently, in the field of oral and maxillofacial surgery, there are many reports on the benefits of 3D models. We introduced a desktop 3D printer in our department, and after a prolonged struggle, we successfully constructed an environment for the “in-house” fabrication of the previously outsourced 3D models that were initially outsourced. Through various efforts, it is now possible to supply inexpensive 3D models stably, and thus ensure safety and precision in surgeries. We report the cases in which inexpensive 3D models were used for orthodontic surgical simulation and discuss the surgical outcomes. Review We explained the specific CT scanning considerations for 3D printing, 3D printing failures, and how to deal with them. We also used 3D models fabricated in our system to determine the contribution to the surgery. Based on the surgical outcomes of the two operators, we compared the operating time and the amount of bleeding for 25 patients who underwent surgery using a 3D model in preoperative simulations and 20 patients without using a 3D model. There was a statistically significant difference in the operating time between the two groups. Conclusions In this article, we present, with surgical examples, our in-house practice of 3D simulation at low costs, the reality of 3D model fabrication, problems to be resolved, and some future prospects.

Background Hepatitis B surface antigen (HBsAg) loss is an ideal goal for chronic hepatitis B patients. Antiretroviral therapy (ART) in hepatitis B virus/human immunodeficiency virus-1 (HBV/HIV-1)–coinfected patients can lead to hepatic flare (HF) caused by immune reconstitution-induced inflammatory syndrome (IRIS). Here, we investigated the impact of IRIS-HF on HBsAg loss. Methods This was a retrospective study of 58 HBV/HIV-1–coinfected subjects HBsAg-positive for ≥6 months before ART initiation and followed for ≥1 year (median 9.9 years) after ART initiation. We examined humoral factors in sera from healthy volunteers, HIV-monoinfected patients, and HBV/HIV-1–coinfected patients with IRIS-HF or acute hepatitis B infection. Results During ART, HBsAg loss was observed in 20 of 58 HBV/HIV-1–coinfected patients (34.5%). Of the 58 patients, 15 (25.9%) developed IRIS-HF within 12 months of ART initiation. HBsAg loss was more frequent among patients who developed IRIS-HF (11/15, 73.3%) than those who did not (9/43, 20.9%). Multivariate analysis showed IRIS-HF was an independent predictor of subsequent HBsAg loss. Younger age and higher baseline HBV DNA titer were associated with IRIS-HF. Elevation of sCD163, not CXCL9, CXC10, CXCXL11, or CXCL13, was observed at IRIS-HF. Conclusions IRIS-HF was associated with HBsAg loss in HBV/HIV-1–coinfected patients.

Background Le Fort I osteotomy is one of the surgical procedures now routinely and safely performed. It is possible to move the maxilla in three dimensions, but it is necessary to separate the bones around the maxillary sinus. Therefore, with surgery, maxillary sinus mucosal thickening occurs. By knowing the changes in the sinus mucosa after surgery and the factors affecting it, it is possible to better predict the outcomes of surgery and contribute to safer surgery. In this study, thickening of maxillary sinus mucosa before and after surgery in Le Fort I osteotomy was evaluated using multidetector-row computed tomography (MDCT) images, and the changes in mucosal thickening and the related factors were examined. Methods Using MDCT images, the maxillary sinus mucosa of 125 patients who had undergone Le Fort I osteotomy was retrospectively evaluated before surgery, 1 month after surgery, and 1 year after surgery. On the MDCT images, the maxillary sinus was judged as mucosal thickening and classified into three grades according to the proportion occupying the maxillary sinus. In the evaluation of factors related to mucosal thickening, the following eight factors were examined: sex, age, diagnosis, operating time, amount of postoperative bleeding, with/without bone graft, with/without multisegmental osteotomy, and with/without macrolide therapy after surgery. Results The mean age at the time of surgery was 25.6 ± 8 years. Of all 125 patients, 66 had bilateral thickening, 19 had unilateral thickening, and 40 had no thickening. Factors that were significantly related to mucosal thickening were the operative time for the maxilla, bone grafts, and macrolide therapy after surgery. Conclusions Operative time for the maxilla, bone grafts, and macrolide therapy after surgery were found to be related to mucosal thickening. In addition, MDCT scanning 1 month after surgery was considered to be appropriate for evaluation of maxillary sinus mucosal thickening.

Objectives Tokyo Dental College started oral cancer screening in cooperation with a local dental association in 1992. Reveal the usefulness of Countermeasure and Opportunistic Screening Systems for Oral Cancer. The actual results of countermeasure and opportunistic oral cancer screening systems are reported. Materials and Methods Countermeasure screening for the public was performed in each region, and opportunistic screening was performed in a general dental clinic of a cooperating physician. Results In countermeasure screening, 19,721 persons were checked from 1992 to 2018; the gender ratio was 1:3. The close examination rate was 4.45%. The detection rates of oral cancer and oral potentially malignant disorders were 0.13% and 1.85%, respectively. In opportunistic screening, 29,912 persons were checked from 2006 to 2018; the gender ratio was 2:3. The close examination rate was 2.33%. The detection rates of oral cancer and oral potentially malignant disorders were 0.08% and 2.15%, respectively. The close examination rate was significantly lower in opportunistic screening than in countermeasure screening. The oral cancer detection rates and the positive predictive value for cancer were equivalent. In addition, the detection rate of oral potentially malignant disorders was significantly higher in opportunistic screening than in countermeasure screening. Conclusion Oral cancer detection rates were equivalent between countermeasure and opportunistic screenings, and opportunistic screening were more effective on number of participants and the close examination rate, and the detection rate of oral potentially malignant disorders.

A schwannoma is a benign tumor composed of schwann cells which forms on the periphery of nerves. We report a case of a schwannoma derived from a lingual nerve occurring in the floor of the mouth. The patient was a 27-year-old woman who presented with the complaint of a swelling in the floor of the mouth. It is difficult to distinguish a swelling from a sublingual gland tumor, cyst, or malignant tumor by MRI alone. Therefore, a biopsy and cytological examination were performed one week prior to surgery to determine whether the growth represented a malignancy. The results revealed a class II growth which was suspected to be a schwannoma. Intraoperatively, it became clear that the tumor and lingual nerve were inseparable, making excision of the nerve unavoidable. On the other hand, there was a clear border between the tumor and the sublingual gland, so it was possible to preserve the sublingual gland. In the postoperative pathological diagnosis, a definitive diagnosis was difficult based solely on H-E staining. Therefore, immunohistochemical staining was performed, resulting in a diagnosis of schwannoma. Currently, the patient is still being followed up. The results of this case indicate that preoperative aspiration biopsy cytology is useful in deciding the operative method to be employed.

Mucoepidermoid carcinomas in the minor salivary glands usually originate in the palatine gland, and their occurrence in the retromolar region is rare. We report a rare case of mucoepidermoid carcinoma with clear cell components occurring in the retromolar region. The patient was a 63-year-old woman referred to our hospital with the chief complaint of a painless mass in the right retromolar region initially found during treatment at a local dental clinic. The 20×10-mm mass was well-defined, elastic, and flexible. The surface of the mucosa was healthy. The mass was clinically diagnosed as a gingival benign tumor in the right retromolar region. There were no significant findings in the patient's medical history. The tumor was resected under local anesthesia. Histopathology revealed that squamoid cells, undifferentiated intermediate cells, and clear cells were dominant, with mucus-producing cells in some areas. A mucoepidermoid carcinoma with clear cell components was diagnosed. There were no signs of recurrence or metastasis at 15 months postoperatively and the patient's progress has been satisfactory. Because the tumor was a painless, slow-growing mass, it was clinically diagnosed as a benign tumor of the gingiva, and resection was performed under local anesthesia without performing a biopsy. However, even if a mass in the retromolar region is clinically diagnosed as a benign tumor, the course of treatment should be decided after performing fine-needle aspiration cytology, taking into consideration the possibility of mucoepidermoid carcinoma.

The Frequency with which impacted supernumerary teeth are encountered in a clinical setting is relatively high, with the majority of such cases occurrig in the median maxillary region, and very few in the molar region. In the molar region, mandibular distomolars (fourth molars) are very rare. Although a small number of case reports have described impacted supernumerary distomolars, very few have compared third molars and distomolars. Herein, the authors report two cases involving mandibular distomolars and one case a maxillary distomolar. In each of these cases, the third molar and distomolar were extracted and a macroscopic morphological analysis conducted. The results were then compared with those of the latest available literature.

Visualization of thermal surfaces has been used in various fields. In this study, thermal monitoring of acrylic surfaces has been performed which were processed by a segmented pixel drawing (SPD) method using a slab-RF excited CO2 laser. The SPD method has been newly developed to make an artistic sculpture. In this method, it is possible to obtain various effects on processed surfaces by controlling processing parameters. This method demands uniform processing shapes in a pixel and reproducibility of results. The purposes of this study are to evaluate the processing results and to investigate the causes of unfavorable processing shapes by capturing thermal phenomena. Thermal distribution on laser processed surfaces obtained by this study can be useful to correct some important data for acrylic laser sculptures. The causes of unfavorable processing can be improved so as to obtain uniform processing shapes.