Search

CdTe0.5Se0.5/Cd0.5Zn0.5S core/shell quantum dots (QDs) with a tunable photoluminescence (PL) range from yellow to dark red (up to a PL peak wavelength of 683 nm) were fabricated using various reaction systems. The core/shell QDs created in the reaction solution of trioctylamine (TOA) and oleic acid (OA) at 300 °C exhibited narrow PL spectra and a related low PL efficiency (38%). In contrast, the core/shell QDs prepared in the solution of 1-octadecene (ODE) and hexadecylamine (HDA) at 200 °C revealed a high PL efficiency (70%) and broad PL spectra. This phenomenon is ascribed that the precursor of Cd, reaction temperature, solvents, and ligands affected the formation process of the shell. The slow growth rate of the shell in the solution of ODE and HDA made QDs with a high PL efficiency. Metal acetate salts without reaction with HDA led to the core/shell QDs with a broad size distribution. [ABSTRACT FROM AUTHOR]

Mercaptoacetic acid-capped CdTe quantum dots (QDs) are potential luminescent markers for biological analysis. The photoluminescence (PL) stability of the QDs in buffer solutions determines their practicability as markers in electrophoresis. The stability of the QDs was thus investigated in electrophoresis buffers including tris-borate-ethylenediaminetetraacetic acid (TBE) and tris-acetate-ethylenediaminetetraacetic acid (TAE). The QDs were completely unstable in high-concentrated buffers (≥0.1×). In the case of low concentrations (≤0.07× for TAE, ≤0.035× for TBE), the PL intensity of the QDs in two kinds of buffers decreased with increasing buffer concentrations. A red-shifted PL peak wavelength and PL intensity fluctuation were observed after dispersing the QDs in diluted TAE buffer solutions with concentrations of ≤0.07× for long time. According to the Stern-Volmer plots of PL degradation, the factors leading to the degradation were complicated, which was attributed to the actions of the components including tris, borate or acetic acid, and ethylenediaminetetraacetic acid as well as their mutual effects. [ABSTRACT FROM AUTHOR]

The synthesis and photoluminescence (PL) properties of aqueous CdTe/ZnO core/shell quantum dots (QDs) have been investigated by using thiolglycolic acid as a capping reagent. The highlighted contribution of the present study was CdTe QDs coated with a ZnO shell by controlling the hydrolysis process of Zn(OAc). The QDs benefitted from overcoming the high lattice mismatch between CdTe and ZnO. The PL peak wavelength of the CdTe/ZnO QDs with high PL quantum yields up to 88% was located in a range between 547 and 596 nm by adjusting the size of CdTe cores and the thickness of ZnO shells. The results of X-ray diffraction analysis and transmission electron microscopy observation indicate that the dot-shaped CdTe/ZnO QDs (566 nm) with an average size of 2.2 nm in diameter belong to the cubic CdTe crystal structure. Due to the passivation of surface defects, it is found that the luminescence decay curves accord with a biexponential decay model of exciton and trap radiation behavior. The average PL lifetimes of CdTe (571 nm) and CdTe/ZnO (596 nm) QDs at room temperature are 27.3 and 35.1 ns, respectively. [ABSTRACT FROM AUTHOR]

CdTe quantum dots (QDs) were prepared in an aqueous solution using various mercaptocarboxylic acids, such as 3-mercaptopropionic acid (MPA) and thioglycolic acid (TGA), as stabilizing agents. The experimental result indicated that these stabilizing agents played an important role for the properties of the QDs. Although both TGA and MPA-capped CdTe QDs exhibited the tunable photoluminescence (PL) from green to red color, the TGA-capped QDs revealed a higher PL quantum yield (QY) up to 60% than that of MPA-capped QDs (up to 50%) by using the optimum preparation conditions, such as a pH value of ~11.2 and a TGA/Cd molar ratio of 1.5. PL lifetime measurements indicate that the TGA-capped QDs exhibited a short average lifetime while the MPA-capped QDs revealed a long one. Furthermore, the average lifetime of the TGA-capped QDs increased with the increase of the QDs size, while a decreased lifetime for the MPA-capped QDs was obtained. This means that the PL lifetime depended strongly on the surface state of the CdTe QDs. These results should be utilized for the preparation and applications of QDs. [ABSTRACT FROM AUTHOR]

The polyvinylpyrrolidone (PVP) hybrid luminescent micro-/nanofibers doped with the novel hybrid SiO 2 -coated CdTe nanocrystals (HS-CdTe NCs) have been fabricated for the first time via the electrospinning technique. The morphologies and photoluminescence (PL) emissions of HS-CdTe/PVP micro-/nanofibers prepared by doping the HS-CdTe NCs with the different PL peak wavelength (571, 616, and 643 nm) in PVP fibers were investigated by optical and PL microscope. The results revealed that all the HS-CdTe/PVP hybrid fibers showed an ultralong length for several hundreds of micrometers and a relatively uniform diameter of 1000 ∼ 1200 nm. The hybrid fibers displayed a wavelength-tunable PL emission, determining by the PL of doped HS-CdTe NCs. Moreover, similar to the original PL properties of HS-CdTe NCs before the electrospinning, the HS-CdTe/PVP fibers also showed a series of superior PL properties, such as narrow and symmetry PL spectrum, high, and uniform brightness. For comparison purpose, we also prepared three CdTe/PVP hybrid fibers by doping the 553 nm, 600 nm, and 633 nm PL-emitting CdTe NCs respectively in PVP electrospinning fibers. The characterization results showed that, the obtained three CdTe/PVP hybrid fibers had a basically satisfactory micro-/nanofiber morphology with a long length and relatively uniform diameter, but all the fibers exhibited very weak PL emissions. The enormous contrast in PL properties between HS-CdTe/PVP and CdTe/PVP fibers should mainly be ascribed to the different connection modes of ligands with the NCs and the passivation effect of inert hybrid silica shell on HS-CdTe. It is hopeful that the high luminescent HS-CdTe/PVP micro-/nanofibers with the tunable PL peak wavelength would be a good candidate in the optical sensor, light-emitting devices (LEDs), nanometer-scale waveguides, and the other related photonic materials. [ABSTRACT FROM AUTHOR]