Search

We have investigated calibration variations in the Rameau water vapor Raman lidar. This lidar system was developed by the Institut National de l'Information Géographique et Forestière (IGN) together with the Laboratoire Atmosphères, Milieux, Observations Spatiales (LATMOS). It aims at calibrating Global Navigation Satellite System (GNSS) measurements for tropospheric wet delays and sounding the water vapor variability in the lower troposphere. The Rameau system demonstrated good capacity in retrieving water vapor mixing ratio (WVMR) profiles accurately in several campaigns. However, systematic shortterm and long-term variations in the lidar calibration factor pointed to persistent instabilities. A careful testing of each subsystem independently revealed that these instabilities are mainly induced by mode fluctuations in the optic fiber used to couple the telescope to the detection subsystem and by the spatial nonuniformity of the photomultiplier photocathodes. Laboratory tests that replicate and quantify these instability sources are presented. A redesign of the detection subsystem is presented, which, combined with careful alignment procedures, is shown to significantly reduce the instabilities. Outdoor measurements were performed over a period of 5 months to check the stability of the modified lidar system. The calibration changes in the detection subsystem were monitored with lidar profile measurements using a common nitrogen filter in both Raman channels. A short-term stability of 2-3% and a long-term drift of 2-3% per month are demonstrated. Compared to the earlier Development of Methodologies forWater Vapour Measurement (DEMEVAP) campaign, this is a 3-fold improvement in the long-term stability of the detection subsystem. The overall water vapor calibration factors were determined and monitored with capacitive humidity sensor measurements and with GPS zenith wet delay (ZWD) data. The changes in the water vapor calibration factors are shown to be fairly consistent with the changes in the nitrogen calibration factors. The nitrogen calibration results can be used to correct the overall calibration factors without the need for additional water vapor measurements to within 1% per month. [ABSTRACT FROM AUTHOR]

After 10 years of pioneering aerial digital camera development, IGN's CAMv2 project began in 2006 with the main goal of upgrading the then current system. This had been used for research applications since 1996 in more than six different configurations and in production since 2003 configured with four coloured channels. The new system is still highly modular, enabling combinations of several 'basic components', each consisting of one digital camera head with its storage and control unit. The new camera head was developed around the Kodak KAF-39 000, 39-megapixel array sensor (7216 × 5412 pixels). The system is also very versatile thanks to the possible choice of more than 10 different lenses (from 35 mm up to 180 mm focal length) and interchangeable spectral filters. The mechanical and electronic designs have been reduced in size so as to permit many different configurations including multiple camera heads on the same gyro-stabilised mount. The combination of the performance of camera heads and control and storage units allows a frame rate of one image per 2 s with storage redundancy and 1 s without, leading to a minimum ground sample distance (GSD) of about 9 cm with 60% overlap at an airspeed of 100 m/s. In order to use the new system to best advantage, the adjustment and calibration processes had to be improved. During the summer of 2009, three systems configured for colour imagery, each using four nadir-viewing camera heads (RGB and NIR), were used to acquire images for IGN production work. In January 2009, an eight-camera-head configuration was tested in order to achieve 155-megapixel pan-sharpened images with a pan-sharpening ratio of 2 × 2, and a final swath width of about 14 400 pixels. At that time this configuration needed two windows in the aircraft, but it is now installed on a single, bigger mount. [ABSTRACT FROM AUTHOR]