Search

This paper proposes a new battery cell voltage equalization approach using multiple-receiver wireless power transfer (WPT) working at megahertz (MHz). Compared with existing multiwinding transformer, the MHz multiple-receiver WPT system is advantageous in terms of saved weight and space, ease of implementation, and improved safety. In this paper, the unique operating principle of the WPT-based equalization is first explained, through which equalization currents are naturally determined by the battery cell voltage distribution. The currents are also analytically derived. This facilitates the discussion on power amplifier (PA) design. Performance analysis is then provided to investigate the influences of system parameters on the efficiency and equalization ability of the proposed WPT-based equalization system, and thus guide following design and implementation. Considering the uncertainty in PA load due to the random cell voltage distribution, a current-model Class $E$ PA is designed that enables approximately constant PA output current. Experimental results show that the proposed multiple-receiver WPT-based battery cell equalization system can achieve high overall system efficiency (above 71%) when equalizing six lithium-ion battery cells under loosely coupling ( $k$ = 0.065). A good match between the experimental and calculation results also validates the correctness of the theoretical discussion. [ABSTRACT FROM PUBLISHER]

This paper presents systematic analysis and design of a megahertz multiple-receiver (RX) wireless power transfer (WPT) system driven by a Class E power amplifier. Both circuit-level and system-level analyses are conducted to discuss the characteristics of the WPT system. In order to simultaneously manage the power flow and maximize the overall system efficiency, a new control scheme is proposed that combines maximum efficiency point tracking and time-division multiplexing. Through the proposed scheme, RXs with different loading and coupling conditions can be charged by the same transmitter with simplified design and control strategy. Finally, the proposed control scheme is validated using an example 6.78-MHz three-RX WPT system. The experimental results show that various power requirements can be quickly and stably satisfied, and the overall average system efficiency can reach as high as 71.7%. [ABSTRACT FROM PUBLISHER]

In this paper, the loading effect of a Class E power amplifier (PA) driven 6.78 megahertz (MHz) wireless power transfer (WPT) system is analyzed at both circuit and system levels. A buck converter is introduced and controlled to track an optimal equivalent load that maximizes the system efficiency under uncertainties in the relative position of coils and the final load. For power control, an additional degree of freedom is provided by adding an ultracapacitor bank. A control strategy is proposed to track the maximum efficiency and charge/discharge the ultracapacitor bank through the on/off control of the Class E PA. Thus, high system efficiency can be maintained under various uncertainties and load power demands. Finally, the theoretical analysis and the control scheme are validated in experiments. The results show that the proposed Class E PA-driven MHz WPT system can stably achieve a high efficiency under different coil distances and various constant/pulsed power profiles. The measured highest system efficiency can reach 72.1% at a load power level of 10 W. [ABSTRACT FROM AUTHOR]

Magnetic resonance coupling working at megahertz (MHz) is widely considered as a promising technology for the mid-range transfer of a medium amount of power. It is known that the soft-switching-based Class E rectifiers are suitable for high-frequency rectification, and thus potentially improve the overall efficiency of MHz wireless power transfer (WPT) systems. This paper reports new results on optimized parameter design of a MHz WPT system based on the analytical derivation of a Class E current-driven rectifier. The input impedance of the Class E rectifier is accurately derived, for the first time, considering the on-resistance of the diode and the equivalent series resistance of the filter inductor. This derived input impedance is then used to develop and guide design procedures that determine the optimal parameters of the rectifier, coupling coils, and a Class E PA in an example 6.78-MHz WPT system. Furthermore, the efficiencies of these three components and the overall WPT system are also analytically derived for design and evaluation purposes. In the final experiments, the analytical results are found to well match the experimental results. With loosely coupled coils (mutual inductance coefficient $k$ =0.1327), the experimental 6.78-MHz WPT system can achieve 84% efficiency at a power level of 20 Watts. [ABSTRACT FROM AUTHOR]