Search

A high-frequency isolated multilevel cascaded-type bipolar direct PWM ac–ac converter is proposed. By cascading N-unit cells, the converter can produce symmetric bipolar voltage gain of ±ND. It does not require a separate ac source for each unit cell, and can provide higher ac output voltages with multiple levels using low-voltage rating devices, decreasing output voltage harmonics and filtering requirements. Moreover, phase-shift PWM switching is employed, increasing the effective frequency of the output filter, further reducing its requirements. The converter can be utilized as a dynamic voltage restorer (DVR) for grid voltage regulation, with the following features: No need for an external dc source, separate ac sources, and a line-frequency voltage injection transformer. Injection of higher voltage magnitudes than the line voltage, mitigating deep voltage sags. Injection of a negative series voltage to provide compensation for voltage swells. The detailed circuit operation is explained together with component design guidelines and application as DVR. Finally, experimental results are provided using an 800-W scale-down laboratory prototype. [ABSTRACT FROM AUTHOR]

Single-phase matrix converters (MCs) are undergoing rapid developments due to their bipolar voltage gain (as required in dynamic voltage restorers) and step-changed frequency operation (used in high step-up ac–dc rectifiers, and to provide medium frequency isolation in traction and wind turbine converters, etc.). However, existing buck–boost MCs require high-voltage/current rating devices, and suffer from large component voltage/current stresses and ripples, significantly degrading their efficiency. This article proposes a highly efficient single-phase buck–boost MC; consisting of eight IGBTs (implemented using two full-bridge IGBT modules), second-order input and output filters, and a small value film capacitor. Efficient discrete inverting and noninverting buck and boost operations are proposed (same as that of sixteen-switch cascaded buck–boost MC) with significantly lower component voltage/current stresses and ripples. In addition, flexible inverting and noninverting buck–boost operations are proposed with independent control of buck and boost duty ratios. All of the proposed operations are free of commutation issues, compatible with reactive loads, and provide smooth input and output currents. Furthermore, all the switches have same voltage stresses, and all four switches in a full-bridge module experience the same current stresses. A comprehensive description of circuit operation is presented based on a number of proposed switch modulation strategies with a nonunity power factor load, followed by design guidelines, and comparative evaluations with existing topologies. Finally, experimental verification results are presented, using a 400-VA laboratory prototype converter. [ABSTRACT FROM AUTHOR]

Fault-current handling capability of the modular multilevel converters (MMCs) under dc-cable short-circuit conditions is a major concern for the MMC applications on the high-voltage direct-current (HVDC) transmission systems, where the MMCs based on half-bridge submodules (SMs) cannot block the fault currents to protect the converter devices. In this paper, a comprehensive review for the fault-ride-through capability of the HVDC transmission systems based on the MMCs adopting different SM schemes is presented, where the MMCs can block the fault currents and compensate the reactive currents to the electric grid during the dc faults. An analysis of the dc short-circuit faults in the MMC is introduced and then the operation principle of different SM circuits building the MMC for blocking the fault currents is highlighted. The fault-tolerant operation of these MMC schemes as static synchronous compensator to enhance the ac grid stability during the dc faults is also investigated. A comparison in terms of investment cost, loss, volume, and controllability for various MMC topologies is performed. Comprehensive simulation results for the most promising topologies of the MMC with a capability of fault-ride through under dc-fault conditions are finally presented. [ABSTRACT FROM AUTHOR]