Search

This paper presents a power converter and its control circuit for high-frequency-fed ac to dc conversion. Based on the resonant technique, the input current is shaped to be sinusoidal and is forced to follow the high-frequency sinusoidal input voltage so as to achieve unity power factor. With the proper selection of the characteristic impedance of the resonant tank, the converter is able to perform the function of a buck, boost, or buck-boost converter. The initial condition of the resonant tank is used to control the output voltage gain of the converter. Since all the switches are operated at the fundamental frequency of the input ac source, the switching loss of the converter is small. A control scheme is also proposed for the converter. A proof-of-concept prototype operating at 400 kHz is constructed and its performance is experimentally measured. Results show that the proposed converter operates as theoretically anticipated. [ABSTRACT FROM AUTHOR]

This paper proposes a phase-shift interleaving control method for variable-phase switched-capacitor (SC) converters that can perform voltage conversions with little electromagnetic interference over a wide range of operating condition. This is achieved by having multiple units of SC converter connected in parallel and an N-state hysteresis unit selection control scheme which works along the interleaving control to vary the number of converters in operation. By having the capacitors of inactive units connected to the output and the converters operating with output interleaving operation, the output capacitor that is typically required in SC converters for maintaining a small voltage ripple is made redundant in this configuration. A three-unit SC converter of the proposed configuration is described in this paper. Experimental results show that the proposed solution works satisfactorily with good regulation, input and output interleaving operations, and dynamic response for a wide operating range. [ABSTRACT FROM PUBLISHER]

The switched-capacitor (SC) converters are ideal switching-mode power supplies for consumer portable electronic devices due to their nature of being light weight, small size, and high-power density. However, they suffer from a discontinuous input-current waveform with large di/dt, which leads to significant electromagnetic interference emission. This paper proposes a configuration of SC converters connected in parallel, with their inputs and outputs interleaved and adaptively controlled. The interleaving operation is performed by using an original type of control in which both the capacitors’ charging time TON and switching frequency are adjusted to get the line and load regulation. It is shown that, for a given range of variation of the supply voltage and load, there always exists a solution [TON, TS] that assures both output-voltage regulation and perfect interleaving. Experimental results are provided to validate the feasibility of the proposed scheme. Precise interleaving, and good line and load regulation are maintained for all the designated range, including the transient periods. [ABSTRACT FROM PUBLISHER]