Search

Developing electrocatalytic reactions with high‐efficiency can make important contributions to carbon neutrality. However, poor long‐term stability of catalysts is a bottleneck for its practical application. Herein, an "in situ periodic regeneration of catalyst (PR‐C)" strategy is proposed to give long‐term high efficiency of CO2 electroreduction to generate C2+ products over Cu catalyst by applying a positive potential pulse for a short time periodically in the halide‐containing electrolyte. The high Faradaic efficiency (81.2 %) and current density (22.6 mA cm−2) could be maintained completely at least 36 h, while the activity and selectivity decreased continuously without using the PR‐C method. Control experiments and operando characterization demonstrated that the surface structure and oxidation state of Cu could be recovered periodically by the PR‐C method, which was beneficial for CO2 activation and C−C coupling. [ABSTRACT FROM AUTHOR]

Electroreduction of CO2 into valuable fuels and feedstocks offers a promising way for CO2 utilization. However, the commercialization is limited by the low productivity. Here, we report a strategy to enhance the productivity of CO2 electroreduction by improving diffusion of CO2 to the surface of catalysts using porous organic cages (POCs) as an additive. It was noted that the Faradaic efficiency (FE) of C2+ products could reach 76.1 % with a current density of 1.7 A cm−2 when Cu‐nanorod(nr)/CC3 (one of the POCs) was used, which were much higher than that using Cu‐nr. Detailed studies demonstrated that the hydrophobic pores of CC3 can adsorb a large amount of CO2 for the reaction, and the diffusion of CO2 in the CC3 to the nanocatalyst surface is easier than that in the liquid electrolyte. Thus, more CO2 molecules make contact with the nanocatalysts in the presence of CC3, enhancing CO2 reduction and inhibiting generation of H2. [ABSTRACT FROM AUTHOR]

Electrocatalytic reduction of CO2 (CO2RR) to value‐added chemicals is of great significance for CO2 utilization, however the CO2RR process involving multi‐electron and proton transfer is greatly limited by poor selectivity and low yield. Herein, We have developed an atomically dispersed monovalent zinc catalyst anchored on nitrogenated carbon nanosheets (Zn/NC NSs). Benefiting from the unique coordination environment and atomic dispersion, the Zn/NC NSs exhibit a superior CO2RR performance, featuring a high current density up to 50 mA cm−2 with an outstanding CO Faradaic efficiency of ≈95 %. The center ZnI atom coordinated with three N atoms and one N atom that bridges over two adjacent graphitic edges (Zn‐N3+1) is identified as the catalytically active site. Experimental results reveal that the twisted Zn‐N3+1 structure accelerates CO2 activation and protonation in the rate‐determining step of *CO2 to *COOH, while theoretical calculations elucidate that atomically dispersed Zn‐N3+1 moieties decrease the potential barriers for intermediate COOH* formation, promoting the proton‐coupled CO2RR kinetics and boosting the overall catalytic performance. [ABSTRACT FROM AUTHOR]

Using renewable electricity to drive CO2 electroreduction is an attractive way to achieve carbon‐neutral energy cycle and produce value‐added chemicals and fuels. As an important platform molecule and clean fuel, methanol requires 6‐electron transfer in the process of CO2 reduction. Currently, CO2 electroreduction to methanol suffers from poor efficiency and low selectivity. Herein, we report the first work to design atomically dispersed Sn site anchored on defective CuO catalysts for CO2 electroreduction to methanol. It exhibits high methanol Faradaic efficiency (FE) of 88.6 % with a current density of 67.0 mA cm−2 and remarkable stability in a H‐cell, which is the highest FE(methanol) with such high current density compared with the results reported to date. The atomic Sn site, adjacent oxygen vacancy and CuO support cooperate very well, leading to higher double‐layer capacitance, larger CO2 adsorption capacity and lower interfacial charge transfer resistance. Operando experiments and density functional theory calculations demonstrate that the catalyst is beneficial for CO2 activation via decreasing the energy barrier of *COOH dissociation to form *CO. The obtained key intermediate *CO is then bound to the Cu species for further reduction, leading to high selectivity toward methanol. [ABSTRACT FROM AUTHOR]

Guided by first‐principles calculations, it was found that Cd single‐atom catalysts (SACs) have excellent performance in activating CO2, and the introduction of axial coordination structure to Cd SACs cannot only further decrease the free energy barrier of CO2 reduction, but also suppress the hydrogen evolution reaction (HER). Based on the above discovery, we designed and synthesized a novel Cd SAC that comprises an optimized CdN4S1 moiety incorporated in a carbon matrix. It was shown that the catalyst exhibited outstanding performance in CO2 electroreduction to CO. The faradaic efficiency (FE) of CO could reach up to 99.7 % with a current density of 182.2 mA cm−2 in a H‐type electrolysis cell, and the turnover frequency (TOF) value could achieve 73000 h−1, which was much higher than that reported to date. This work shows a successful example of how to design highly efficient catalysts guided by theoretical calculations. [ABSTRACT FROM AUTHOR]

Electroreduction of CO2 to liquid fuels such as ethanol and n‐propanol, powered by renewable electricity, offers a promising strategy for controlling the global carbon balance and addressing the need for the storage of intermittent renewable energy. In this work, we discovered that the composite composed of nitrogen‐doped graphene quantum dots (NGQ) on CuO‐derived Cu nanorods (NGQ/Cu‐nr) was an outstanding electrocatalyst for the reduction of CO2 to ethanol and n‐propanol. The Faradaic efficiency (FE) of C2+ alcohols could reach 52.4 % with a total current density of 282.1 mA cm−2. This is the highest FE for C2+ alcohols with a commercial current density to date. Control experiments and DFT studies show that the NGQ/Cu‐nr could provide dual catalytic active sites and could stabilize the CH2CHO intermediate to enhance the FE of alcohols significantly through further carbon protonation. The NGQ and Cu‐nr had excellent synergistic effects for accelerating the reduction of CO2 to alcohols. [ABSTRACT FROM AUTHOR]

Electrochemical reduction of CO2 into energy‐dense chemical feedstock and fuels provides an attractive pathway to sustainable energy storage and artificial carbon cycle. Herein, we report the first work to use atomic Ir electrocatalyst for CO2 reduction. By using α‐Co(OH)2 as the support, the faradaic efficiency of CO could reach 97.6 % with a turnover frequency (TOF) of 38290 h−1 in aqueous electrolyte, which is the highest TOF up to date. The electrochemical active area is 23.4‐times higher than Ir nanoparticles (2 nm), which is highly conductive and favors electron transfer from CO2 to its radical anion (CO2.−). Moreover, the more efficient stabilization of CO2.− intermediate and easy charge transfer makes the atomic Ir electrocatalyst facilitate CO production. Hence, α‐Co(OH)2‐supported atomic Ir electrocatalysts show enhanced CO2 activity and stability. High‐density atomic Ir supported on α‐Co(OH)2 had outstanding performance for CO2 reduction to CO. The faradaic efficiency can reach 97.6 % with a TOF of 38 290 h−1. The high catalytic activity is attributed to more active sites for CO2 adsorption and activation and the higher efficiency in stabilizing the CO2.− intermediate. [ABSTRACT FROM AUTHOR]

Supported Cu single-atom (Cu-SA) catalysts have exhibited unique activity and selectivity in CO 2 reduction, but they generally suffer from the easy transformation of active Cuδ+ into inactive Cu0. Herein, porous TiO 2 supported Cu single atoms (Cu-SAs/TiO 2) photocatalyst was fabricated and dioxygen (O 2) enhanced photocatalytic CO 2 reduction performance of Cu-SAs/TiO 2 was investigated by in-situ characterizations and theoretical calculations. The results showed that both activity and stability of Cu-SAs/TiO 2 photocatalyst could be improved by feeding a small amount of O 2 (117.6 ppm) in the reaction system. The competitive electron transfer to O 2 on Cu-SAs/TiO 2 maintained dynamic stability of Cuδ+ active sites, and O 2 -derived *OOH species lowered the formation energy barrier of key intermediate *COOH as well as delivered *H species for accelerating intermediates protonation process. Total yield rate of CH 4 and CO reached 34.64 μmol·g cat ·h−1 for CO 2 photoreduction over Cu-SAs/TiO 2 after introducing 117.6 ppm O 2 , accompanied by enhanced durability. [Display omitted] • Porous TiO 2 supported Cu single atoms (Cu-SAs/TiO 2) photocatalyst was fabricated. • Cu single-atom sites can significantly improve CO 2 photoreduction performance. • The dynamic stability of Cuδ+ sites is sustained by O 2 for photocatalytic CO 2 reduction. • The roles of O 2 are unraveled by in-situ characterizations and DFT calculations. [ABSTRACT FROM AUTHOR]

A single-molecule confinement-sulfurization strategy was proposed to construct ultrafine Co-MoS 2 monolayer catalysts, employing oil-soluble POMs as precursors. Well-defined Co 2 Mo 10 -POMs were introduced for regulating CoMoS sites at atomic scale, exhibiting high intrinsic activities in VR HCK. [Display omitted] • Ultrafine Co-MoS 2 monolayer catalysts were controllably fabricated from the oil-soluble polyoxometalate (POM) precursors. • The POM anions were encapsulated and confined by organic surfactant cations at single-molecule level. • Well-defined Co 2 Mo 10 POMs were introduced for regulating CoMoS active sites at atomic scale. • CoMoS active sites show excellent catalytic performance for slurry phase hydrocracking of vacuum residue. • The structures and catalytic mechanisms of CoMoS sites were revealed by coupling XAFS with DFT calculations. Herein, a novel single-molecule confinement-sulfurization strategy was proposed to construct ultrafine Co-MoS 2 monolayer catalysts by using oil-soluble single-molecule polyoxometalates (POMs), (DODA) 6 Co 2 Mo 10 , as precursors. Well-defined Co 2 Mo 10 -POM, acting as molecular pre-assembling platform, is introduced for the atomically precise construction of bimetallic sites. Highly efficient conversion of VR under severe condition is realized with (DODA) 6 Co 2 Mo 10. The origin of prominent catalytic performance can be attributed to the in-situ formation of ultrafine single-layered Mo-based nanosheets with abundant exposed CoMoS active sites. By combining synchrotron radiation-based X-ray absorption spectroscopy and density functional theory calculations, we further discover that there is clearly intimate interaction between Mo and Co atoms and the dissociation of molecular hydrogen at CoMoS phases is energetically preferred, leading to remarkable hydrogenation and coke suppression activity. This work highlights an idea on the rational design and targeted synthesis of ultrafine bimetallic catalysts for slurry phase HCK with dramatically synergistic catalysis. [ABSTRACT FROM AUTHOR]