Search

Abstract: A sandwich composite is typically designed to possess high bending stiffness and low density and consists of two thin and stiff skin sheets and a lightweight core. Due to the high stiffness-to-weight and strength-to-weight ratios, sandwich composite materials are widely used in various structural applications including aircraft, spacecraft, automotive, wind-turbine blades and so on. However, sandwich composite structures used in such applications often suffer from poor acoustic performance. Ironically, these superior mechanical properties make the sandwich composites “excellent” noise radiators. There is a growing interest in optimizing and developing a new sandwich composite which will meet the high stiffness-to-weight ratio and offer improved acoustic performance. The focus of this study is to investigate the structural–vibrational performance of carbon-fiber face sheet sandwich composite beams with varying core materials and properties. Core materials utilized in this study included Nomex and Kevlar Honeycomb cores, and Rohacell foam cores with different densities and shear moduli. The structural–vibrational performance including acoustic and vibrational damping properties was experimentally characterized by analyzing the wave number response, and structural damping loss factor (η) from the frequency response functions, respectively. It was observed that the relationship between the slopes of the wave number data for frequencies above 1000Hz is inversely proportional to the core material’s specific modulus (G/ρ). The analysis also showed the importance of using a honeycomb core’s effective properties for equal comparison to foam-cored sandwich structures. Utilizing analytical modeling, the loss factors of the core materials (β) was determined based upon the measured structural loss factors (η) for a frequency range up to 4000Hz. It was determined that low shear modulus cores have similar material damping values to structural damping values. However as the core’s shear modulus increases, the percent difference between these values is found to increase linearly. It was also observed that high structural damping values correlated to low wave number amplitudes, which correspond to reductions in the level of noise radiation from the structure. [Copyright &y& Elsevier]

Abstract: Due to their higher strength-to-weight and stiffness-to-weight ratios compared to metals, fiber reinforced composite materials are a great alternative for use in many structural applications. However these properties lead to poor acoustic performance as composite materials are excellent noise radiators. This is particularly true for sandwich composite structures. Therefore the focus of this study is to investigate the effect of a core thickness change on the vibrational properties of Rohacell foam/carbon-fiber face sheet sandwich composite beams. Four different foam core thicknesses were explored, using a combination of experimental and analytical methods to characterize sound and vibrational properties of the sandwich beams. First, the wave number responses of the beams were obtained, from which coincidence frequencies were identified. Second, from the frequency response functions the structural damping loss factor, η, was determined using the half-power bandwidth method. Experimental and analytical results show that the relationship between core thickness and coincidence frequency is non-linear. A drastic increase in coincidence frequency was observed for the sandwich beam with the thinnest core thickness due to the low bending stiffness. Moreover this low bending stiffness results in low damping values, and consequently high wave number amplitude responses at low frequency ranges (<1000Hz). [Copyright &y& Elsevier]