Search

Abstract: This paper studies the synthesis and electrochemical characterization of novel graphene-beaded carbon nanofibers (G/CNFs) as electrode material for use in supercapacitor. The porous G/CNF films were prepared by electrospinning polyacrylonitrile (PAN)/N,N-dimethylformamide (DMF) solution dispersed with oxidized graphene nanosheets, followed by carbonization at 800 °C in a tubular quartz furnace. The morphology and chemical structure of the porous G/CNF films were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. The electrochemical behavior of the synthesized G/CNF films as supercapacitor electrodes was characterized by means of cyclic voltammetry (CV), galvanotactic charge/discharge, and electrochemical impedance test in a 6 m KOH aqueous electrolyte. Electrochemical measurements revealed that the maximum specific capacitance of the porous G/CNF electrodes reached up to 263.7 F g− 1 at a discharge current density 100 mA g− 1. Furthermore, the supercapacitor exhibited very good cycling stability of energy storage with the retention ratio of 86.9% after 2000 cycles. The high electrochemical performance of the G/CNF electrodes was attributed to the unique nanostructural configuration, high electrical conductivity, and large specific surface area of the graphene nanosheets. [Copyright &y& Elsevier]

Abstract: This paper reports the fabrication and mechanical properties of hybrid multi-scale epoxy composites reinforced with conventional carbon fiber (CF) fabrics surface-attached with electrospun carbon nanofiber (ECN) mats. The ECNs were prepared via thermal treatments of polyacrylonitrile copolymer nanofibers, which were produced by the electrospinning technique and collected as overlaid mats on the T300 CF fabrics. The ECN-CF fabrics/mats were used as innovative reinforcement fillers for the fabrication of hybrid multi-scale composites (with SC-15 epoxy resin) through the composite-manufacturing technique of vacuum assisted resin transfer molding. Three-point bending test and short-beam shear test were carried out to evaluate the strengthening/toughening effects of ECNs on mechanical properties of the novel composites. The results indicated that out-of-plane mechanical properties of the ECN-CF/epoxy composites were considerably higher than the control sample of traditional CF/epoxy composites. [Copyright &y& Elsevier]