Search

The possibility of enhancing the frequency performance of electrochemical capacitors by tailoring the nanostructure of the carbon electrode to increase electrolyte permeability is demonstrated. Highly porous, vertically oriented carbon electrodes which are in direct electrical contact with themetallic current collector are produced viaMPECVD growth onmetal foils.Theresulting structure has a capacitance and frequency performance between that of an electrolytic capacitor and an electrochemical capacitor. Fully packaged devices are produced on Ni and Cu current collectors and performance compared to state-of-the-art electrochemical capacitors and electrolytic capacitors.The extension of capacitive behavior to the AC regime (~100Hz) opens up an avenue for a number of new applications where physical volume of the capacitor may be significantly reduced. [ABSTRACT FROM AUTHOR]

Herein we present an inexpensive facile wet-chemistry-free approach to the transfer of chemical vapour-deposited multiwalled carbon nanotubes to flexible transparent polymer substrates in a single-step process. By controlling the nanotube length, we demonstrate accurate control over the electrical conductivity and optical transparency of the transferred thin films. Uniaxial strains of up to 140% induced only minor reductions in sample conductivity, opening up a number of applications in stretchable electronics. Nanotube alignment offers enhanced functionality for applications such as polarisation selective electrodes and flexible supercapacitor substrates. A capacitance of 17 F/g was determined for supercapacitors fabricated fromthe reported dry-transferred MWCNTs with the corresponding cyclic voltagrams showing a clear dependence on nanotube length [ABSTRACT FROM AUTHOR]

Manganese oxide (MnO 2) is proven to be an efficient cathode material in zinc-ion batteries (ZIBs). However, its poor electronic conductivity strongly limits the performance of Zn–MnO 2 batteries. In order to improve performance beyond typical graphitic carbon additives, a binary conductive additive, a combination of carbon nanohorns (CNHs) and carbon nanotubes (CNTs), is added into the MnO 2 electrode to establish high-speed electron-channels in the CNTs/CNHs network with an efficient "line-to-surface-to-point" microstructure. In this electrode, the high aspect-ratio CNTs create a conducting highway for the collected charges, while the CNHs provide extra surface area for electron transfer. Moreover, the specific surface area of the electrode increases due to the introduction of CNHs, which increases the Zn2+ diffusion coefficient. As a result, the corresponding battery reaches a high specific capacity (343 mAh g−1 at 0.3 A g−1), excellent rate performance (191.3 mAh g−1 at 3 A g−1) and long-life cycle. Moreover, it achieves an admirable specific energy density of 466 W h kg−1, together with a peak power density of 9.4 kW kg−1 (normalized to the weight of MnO 2), the performance of which is among the best reported ZIBs. This work reveals new pathways to improve the performance of MnO 2 cathodes for ZIBs. Image 1 [ABSTRACT FROM AUTHOR]