Search

In this paper, a novel high-speed and energy-efficient 4–2 compressor cell is proposed using carbon nanotube field-effect transistors. The proposed compressor is realized efficiently based on NAND–NOR gates and multiplexers. To estimate the performance of the presented design, simulations are carried out using Synopsis HSPICE under different conditions. The results demonstrate the improvement of the proposed design compared to the best reference designs in terms of delay and energy consumption, by 20–26%, respectively. Also, the susceptibility of the proposed design against the process, voltage, temperature (PVT), and noise variations is examined. It is robust against PVT variations and high amplitude of noises compared with its counterpart. Further, embedding the proposed compressor in an 8 × 8-bit binary multiplier demonstrates that it has better speed and energy consumption with regard to its counterparts. [ABSTRACT FROM AUTHOR]

Power consumption and especially leakage power are the main concerns of nano MOSFET technology. On the other hand, binary circuits face a huge number of interconnection wires, which results in power dissipation and area. Researchers introduced emerging nanodevices and multiple-valued logic (MVL) as two feasible solutions to overcome the challenges mentioned above. Carbon nanotube field-effect transistor (CNFET) is one of the emerging technologies that has some unique properties and advantages over MOSFET, such as adjusting the carbon nanotube (CNT) diameters to have the desired threshold voltage and have the same mobility as P-FET and N-FET transistors. In this paper, we present a novel method for designing ternary logic circuits based on CNFETs. Each of our designed logic circuits implements a logic function and its complementary via a control signal. Also, these circuits have a high impedance state, which saves power while the circuits are not in use. Moreover, we designed a two-digit adder/ subtractor and a power-efficient ternary logic arithmetic logic unit (ALU) based on the proposed gates. The proposed ternary circuits are simulated using HSPICE via standard 32 nm CNFET technology. The simulation results indicate the designs' correct operation under different process, voltage, and temperature (PVT) variations. Also, simulation results show that the two-digit adder/ subtractor using our proposed gates has 12X and 5X lower power consumption and power-delay product (PDP), respectively, compared to previous designs. [ABSTRACT FROM AUTHOR]

This paper presents low-power carbon nanotube field-effect transistor (CNTFET)-based quaternary logic circuits. The proposed quaternary circuits are designed based on the CNTFET unique properties, such as the same carrier mobility for N- and P-type devices and also providing desirable threshold voltages by adopting proper diameters for the nanotubes. In addition, no paths exist between supply and ground rails in the steady states of the proposed designs, which eliminates the ON state static current and also the stacking technique is utilised in order to significantly reduce the leakage currents. The results of the simulations, conducted using Synopsys HSPICE with the standard 32 nm CNTFET technology, confirm the significantly lower power consumption, higher energy efficiency and lower sensitivity to process variation of the proposed designs compared to the state-of-the-art quaternary logic circuits. The proposed quaternary logic circuits have on average 92, 99 and 91% less total power, static power and PDP, respectively, compared with the most low-power and energy-efficient CNTFET-based quaternary logic circuits, recently presented in the literature. [ABSTRACT FROM AUTHOR]

Using multiple-valued logic provides more information transmission over a signal line. So it could solve the binary logic circuits problems such as interconnections requirement. In this paper, a universal method for designing ternary 3-2 and 4-2 compressor cells based on carbon nanotube field-effect transistors (CNTFETs) is presented. The proposed circuits use unique properties of CNTFETs, such as adjustable threshold voltage by changing CNT diameter and ballistic carrier transportation. In both designs transmission gates, ternary decoder and standard ternary buffers with different threshold voltages are used. The proposed compressors receive three (for 3-2 compressor) or four (for 4-2 compressor) ternary digits, produce the summation of these digits and show the results in two ternary digits (Sum, Carry). For evaluation and simulation the proposed circuits, Synopsys HSPICE simulator with 32 nm compact model is used in different simulation conditions. [ABSTRACT FROM AUTHOR]

In this paper energy-efficient multiple valued logic (MVL) circuits based on carbon nanotube field effect transistor (CNTFET) are proposed. These circuits are designed based on the unique properties of CNTFETs, such as having same mobility for electrons and holes and also capability of adopting desirable threshold voltage by adjusting the CNTs diameters. The proposed designs have high driving capability, larger noise margins and higher robustness as compared to the previous CNTFET-based designs. The proposed quaternary circuits are examined using HSPICE simulator with the standard CNTFET technology. Simulation results demonstrate more energy-efficient and robust operation of the proposed designs, as compared to the other state-of-the-art CNTFET-based MVL circuits, recently presented in the literature. According to the simulation results the proposed STNOT, STNAND and STNOR circuits have on average 82%, 76% and 45% lower power-delay product (PDP), respectively as compared to their state-of-the-art counterparts. In addition, the proposed QNOT, QNAND and QNOR circuits have the average PDP improvements of 79%, 42% and 61%, respectively, as compared the other recently presented CNTFET-based quaternary designs. [ABSTRACT FROM AUTHOR]