Search

Radiocarbon analysis of the carbonaceous aerosol allows an apportionment of fossil and non-fossil sources of airborne particulate matter (PM). A chemical separation of total carbon (TC) into its subfractions organic carbon (OC) and elemental carbon (EC) refines this powerful technique, as OC and EC originate from different sources and undergo different processes in the atmosphere. Although 14C analysis of TC, EC, and OC has recently gained increasing attention, interlaboratory quality assurance measures have largely been missing, especially for the isolation of EC and OC. In this work, we present results from an intercomparison of 9 laboratories for 14C analysis of carbonaceous aerosol samples on quartz fiber filters. Two ambient PM samples and 1 reference material (RM 8785) were provided with representative filter blanks. All laboratories performed 14C determinations of TC and a subset of isolated EC and OC for isotopic measurement. In general, 14C measurements of TC and OC agreed acceptably well between the laboratories, i.e. for TC within 0.015–0.025 F14C for the ambient filters and within 0.041 F14C for RM 8785. Due to inhomogeneous filter loading, RM 8785 demonstrated only limited applicability as a reference material for 14C analysis of carbonaceous aerosols. 14C analysis of EC revealed a large deviation between the laboratories of 28–79% as a consequence of different separation techniques. This result indicates a need for further discussion on optimal methods of EC isolation for 14C analysis and a second stage of this intercomparison.

The RHAPS (Redox-Activity And Health-Effects Of Atmospheric Primary And Secondary Aerosol) project was launched in 2019 with the major objective of identifying specific properties of the fine atmospheric aerosol from combustion sources that are responsible for toxicological effects and can be used as new metrics for health-related outdoor pollution studies. In this paper, we present the overall methodology of RHAPS and introduce the phenomenology and the first data observed. A comprehensive physico-chemical aerosol characterization has been achieved by means of high-time resolution measurements (e.g., number size distributions, refractory chemical components, elemental composition) and low-time resolution analyses (e.g., oxidative potential, toxicological assays, chemical composition). Preliminary results indicate that, at the real atmospheric conditions observed (i.e., daily PM1 from less than 4 to more than 50 μg m−3), high/low mass concentrations of PM1, as well as black carbon (BC) and water soluble Oxidative Potential (WSOP,) do not necessarily translate into high/low toxicity. Notably, these findings were observed during a variety of atmospheric conditions and aerosol properties and with different toxicological assessments. Findings suggest a higher complexity in the relations observed between atmospheric aerosol and toxicological endpoints that go beyond the currently used PM1 metrics. Finally, we provide an outlook to companion papers where data will be analyzed in more detail, with the focus on source apportionment of PM1 and the role of source emissions on aerosol toxicity, the OP as a predictive variable for PM1 toxicity, and the related role of SOA possessing redox-active capacity, exposure-response relationships for PM1, and air quality models to forecast PM1 toxicity. [ABSTRACT FROM AUTHOR]

Providing reliable observations of aerosol particles' absorption properties at spatial and temporal resolutions suited to climate models is of utter importance to better understand the effects that atmospheric particles have on climate. Nowadays, one of the instruments most widely used in international monitoring networks for in situ surface measurements of light absorption properties of atmospheric aerosol particles is the multi-wavelength dual-spot Aethalometer, AE33. The AE33 derives the absorption coefficients of aerosol particles at seven different wavelengths from the measurements of the optical attenuation of light through a filter where particles are continuously collected. An accurate determination of the absorption coefficients from the AE33 instrument relies on the quantification of the non-linear processes related to the sample collection on the filter. The multiple-scattering correction factor (C), which depends on the filter tape used and on the optical properties of the collected particles, is the parameter with both the greatest uncertainty and the greatest impact on the absorption coefficients derived from the AE33 measurements. Here we present an in-depth analysis of the AE33 multiple-scattering correction factor C and its wavelength dependence for two different and widely used filter tapes, namely the old, and most referenced, TFE-coated glass, or M8020, filter tape and the currently, and most widely used, M8060 filter tape. For performing this analysis, we compared the attenuation measurements from AE33 with the absorption coefficients measured with different filter-based techniques. On-line co-located multi-angle absorption photometer (MAAP) measurements and off-line PP_UniMI polar photometer measurements were employed as reference absorption measurements for this work. To this aim, we used data from three different measurement stations located in the north-east of Spain, namely an urban background station (Barcelona, BCN), a regional background station (Montseny, MSY) and a mountaintop station (Montsec d'Ares, MSA). The median C values (at 637 nm) measured at the three stations ranged between 2.29 (at BCN and MSY, lowest 5th percentile of 1.97 and highest 95th percentile of 2.68) and 2.51 (at MSA, lowest 5th percentile of 2.06 and highest 95th percentile of 3.06). The analysis of the cross-sensitivity to scattering, for the two filter tapes considered here, revealed a large increase in the C factor when the single-scattering albedo (SSA) of the collected particles was above a given threshold, up to a 3-fold increase above the average C values. The SSA threshold appeared to be site dependent and ranged between 0.90 to 0.95 for the stations considered in the study. The results of the cross-sensitivity to scattering displayed a fitted constant multiple-scattering parameter, Cf , of 2.21 and 1.96, and a cross-sensitivity factor, ms , of 1.8 % and 3.4 % for the MSY and MSA stations, respectively, for the TFE-coated glass filter tape. For the M8060 filter tape, Cf values of 2.50, 1.96 and 1.82 and ms values of 1.6 %, 3.0 % and 4.9 % for the BCN, MSY and MSA stations, respectively, were obtained. SSA variations also influenced the spectral dependence of C , which showed an increase with wavelength when SSA was above the site-dependent threshold. Below the SSA threshold, no statistically significant dependence of C on the wavelength was observed. For the measurement stations considered here, the wavelength dependence of C was to some extent driven by the presence of dust particles during Saharan dust outbreaks that had the potential to increase the SSA above the average values. At the mountaintop station, an omission of the wavelength dependence of the C factor led to an underestimation of the absorption Ångström exponent (AAE) by up to 12 %. Differences in the absorption coefficient determined from AE33 measurements at BCN, MSY and MSA of around 35 %–40 % can be expected when using the site-dependent experimentally obtained C value instead of the nominal C value. Due to the fundamental role that the SSA of the particles collected on the filter tape has in the multiple-scattering parameter C , we present a methodology that allows the recognition of the conditions upon which the use of a constant and wavelength-independent C is feasible. [ABSTRACT FROM AUTHOR]

In this paper, a new methodology coupling aerosol optical and chemical parameters in the same source apportionment study is reported. In addition to results on source contributions, this approach provides information such as estimates for the atmospheric absorption Ångström exponent (α) of the sources and mass absorption cross sections (MACs) for fossil fuel emissions at different wavelengths. A multi-time resolution source apportionment study using the Multilinear Engine (ME-2) was performed on a PM 10 dataset with different time resolutions (24, 12, and 1 h) collected during two different seasons in Milan (Italy) in 2016. Samples were optically analysed by an in-house polar photometer to retrieve the aerosol absorption coefficient bap (in Mm -1) at four wavelengths (λ=405 , 532, 635, and 780 nm) and were chemically characterized for elements, ions, levoglucosan, and carbonaceous components. The dataset joining chemically speciated and optical data was the input for the multi-time resolution receptor model; this approach was proven to strengthen the identification of sources, thus being particularly useful when important chemical markers (e.g. levoglucosan, elemental carbon) are not available. The final solution consisted of eight factors (nitrate, sulfate, resuspended dust, biomass burning, construction works, traffic, industry, aged sea salt); the implemented constraints led to a better physical description of factors and the bootstrap analysis supported the goodness of the solution. As for bap apportionment, consistent with what was expected, biomass burning and traffic were the main contributors to aerosol absorption in the atmosphere. A relevant feature of the approach proposed in this work is the possibility of retrieving a lot of other information about optical parameters; for example, in contrast to the more traditional approach used by optical source apportionment models, here we obtained source-dependent α values without any a priori assumption (α biomass burning =1.83 and α fossil fuels =0.80). In addition, the MACs estimated for fossil fuel emissions were consistent with literature values. It is worth noting that the approach presented here can also be applied using more common receptor models (e.g. EPA PMF instead of multi-time resolution ME-2) if the dataset comprises variables with the same time resolution as well as optical data retrieved by widespread instrumentation (e.g. an Aethalometer instead of in-house instrumentation). [ABSTRACT FROM AUTHOR]

Particulate Matter (PM) is a complex and heterogeneous mixture of atmospheric particles recognized as a threat to human health. Oxidative Potential (OP) measurement is a promising and integrative method for estimating PM-induced health impacts since it is recognized as more closely associated with adverse health effects than ordinarily used PM mass concentrations. OP measurements could be introduced in the air quality monitoring, along with the parameters currently evaluated. PM deposition in the lungs induces oxidative stress, inflammation, and DNA damage. The study aimed to compare the OP measurements with toxicological effects on BEAS-2B and THP-1 cells of winter and summer PM 1 collected in the Po Valley (Italy) during 2021. PM 1 was extracted in deionized water by mechanical agitation and tested for OP and, in parallel, used to treat cells. Cytotoxicity, genotoxicity, oxidative stress, and inflammatory responses were assessed by MTT test, DCFH-DA assay, micronucleus, γ-H2AX, comet assay modified with endonucleases, ELISA, and Real-Time PCR. The evaluation of OP was performed by applying three different assays: dithiothreitol (OPDTT), ascorbic acid (OPAA), and 2′,7′-dichlorofluorescein (OPDCFH), in addition, the reducing potential was also analysed (RPDPPH). Seasonal differences were detected in all the parameters investigated. The amount of DNA damage detected with the Comet assay and ROS formation highlights the presence of oxidative damage both in winter and in summer samples, while DNA damage (micronucleus) and genes regulation were mainly detected in winter samples. A positive correlation with OPDCFH (Spearman's analysis, p < 0.05) was detected for IL-8 secretion and γ-H2AX. These results provide a biological support to the implementation in air quality monitoring of OP measurements as a useful proxy to estimate PM-induced cellular toxicological responses. In addition, these results provide new insights for the assessment of the ability of secondary aerosol in the background atmosphere to induce oxidative stress and health effects. • Implementation of OP measurements as a useful proxy to estimate PM-induced toxicity. • Secondary aerosol in the background atmosphere is able to induce oxidative stress. • PM 1 induces DNA damage and alteration of gene expression in absence of cytotoxicity. [ABSTRACT FROM AUTHOR]

In this study, the applicability of a benchtop polar photometer (PP_UniMI) to retrieve multi-wavelength aerosol absorption coefficient data by off-line measurements of the Multi-Angle Absorption Photometer (MAAP) sample spots is presented. MAAP is a widespread single wavelength online instrument providing the aerosol absorption coefficient and the equivalent black carbon concentration. In this work, MAAP samples collected during four different campaigns were analysed off-line with PP_UniMI. First of all, data from PP_UniMI and MAAP were compared to investigate contributions to measurement uncertainties. In particular, the role of the following assumptions performed in the MAAP was investigated: 1) reconstructing angular distribution of light scattered by filter samples from measurements at three fixed angles using analytical functions; 2) setting the fraction of the back-scattered radiation by the blank filter (B M) at a fixed value B M = 0.7; 3) assuming a fixed value for the asymmetry factor g = 0.75. Samples collected at several sites showed an agreement within 5% when data from the two instruments were retrieved using the same approximations (i.e. backscattered radiation from the filter matrix B M set at a fixed value, phase functions reconstructed by analytical functions from measurements at 3 angles, same asymmetry factor) in the data retrieval algorithm. Conversely, larger differences (14% on average) between off-line measurements and averaged MAAP data were obtained when the high-angular resolved information available by PP_UniMI was exploited. By analysing the role of MAAP assumptions for σ ap retrieval, it resulted that fixing B M = 0.7 was the main responsible for the detected differences. Indeed, high-angular resolved off-line measurements by PP_UniMI allow to directly measure B M , obtaining B M = 0.88 on white spots. It is noteworthy that the observed results were similar at all investigated sites, so they proved to be independent of the aerosol type and can likely be attributed to instrumental effects. Moreover, a sensitivity test was carried out also to check the impact of the fixed value used for the asymmetry factor (set at g = 0.75 in both instruments). Varying g values within the typical range for ambient aerosol (0.50–0.75) the estimate of aerosol absorbance ABS (directly obtained from PP_UniMI measurements and linked to σ ap) was affected by 8% at most, thus being a minor source of uncertainty in the calculation. The effect of the variability in blank spots used for off-line analyses was also evaluated and resulted in a contribution smaller than 3% to the uncertainty of the methodology employed. Finally, the possibility of exploiting multi-wavelength assessment of absorption coefficients is an added value of PP_UniMI; indeed, it allows to estimate the contribution of different aerosol sources and components to the absorption coefficient using MAAP tapes used in present or past campaigns. Image 1 • MAAP sample spots were analysed off-line by a benchtop multi-λ polar photometer. • The effect of different assumptions in MAAP radiative transfer scheme was tested. • A fixed blank spot backscattered fraction can cause 12% σ ap overestimation. • The other hypotheses had smaller impacts (less than 8%). [ABSTRACT FROM AUTHOR]