Search

Ferumoxytol is an ultrasmall super paramagnetic particles of iron oxide (USPIO) agent recently used for magnetic resonance (MR) vascular imaging. Other USPIOs have been previously used for assessing inflammation within atheroma. We aim to assess feasibility of ferumoxytol in imaging carotid atheroma (with histological assessment); and the optimum MR imaging time to detect maximum quantitative signal change post-ferumoxytol infusion. Ten patients with carotid artery disease underwent high-resolution MR imaging of their carotid arteries on a 1.5 T MR system. MR imaging was performed before and at 24, 48, 72 and 96 hrs post ferumoxytol infusion. Optimal ferumoxytol uptake time was evaluated by quantitative relaxometry maps indicating the difference in T 2 * (ΔT 2 *) and T 2 (ΔT 2 ) between baseline and post-Ferumoxytol MR imaging using 3D DANTE MEFGRE qT 2 *w and iMSDE black-blood qT 2 w sequences respectively. 20 patients in total (10 symptomatic and 10 with asymptomatic carotid artery disease) had ferumoxytol-enhanced MR imaging at the optimal imaging window. 69 carotid MR imaging studies were completed. Ferumoxytol uptake (determined by a decrease in ΔT 2 * and ΔT 2 ) was identified in all carotid plaques (symptomatic and asymptomatic). Maximum quantitative decrease in ΔT 2 * (10.4 [3.5-16.2] ms, p < 0.001) and ΔT 2 (13.4 [6. 2 -18.9] ms; p = 0.001) was found on carotid MR imaging at 48 hrs following the ferumoxytol infusion. Ferumoxytol uptake by carotid plaques was assessed by histopathological analysis of excised atheroma. Ferumoxytol-enhanced MR imaging using quantitative 3D MR pulse sequences allows assessment of inflammation within carotid atheroma in symptomatic and asymptomatic patients. The optimum MR imaging time for carotid atheroma is 48 hrs after its administration.

Background: Improved motion-sensitized driven-equilibrium (iMSDE) preparations have been successfully used in carotid artery wall imaging to achieve blood suppression, but it causes notable signal loss, mostly due to inherent T2 decay, eddy current effects and B1 + inhomogeneity. In this study, we investigate the signal to noise ratio (SNR) and blood suppression performance of iMSDE using composite RF pulses and sinusoidal gradients. Optimized first moment (m1) values for iMSDE prepared T1- and T2- weighted (T1- and T2-w) imaging are presented., Methods: Twelve healthy volunteers and six patients with carotid artery disease underwent iMSDE and double inversion recovery (DIR) prepared T1- and T2-w fast spin echo (FSE) MRI of the carotid arteries. Modified iMSDE module using composite RF pulses and sinusoidal gradients were evaluated with a range of m1. SNR of adjacent muscle, vessel wall and the lumen were reported. The optimized iMSDE module was also tested in a 3D variable flip angle FSE (CUBE) acquisition., Results: The SNR of muscle was highest using sinusoidal gradients, and the relative improvement over the trapezoidal gradient increased with higher m1 (p<0.001). Optimal SNR was observed using an iMSDE preparation scheme containing two 180° composite pulses and standard 90° and -90° pulses (p=0.151). iMSDE produced better blood suppression relative to DIR preparations even with a small m1 of 487 mT*ms2/m (p<0.001). In T1-w iMSDE, there was a SNR decrease and an increased T2 weighting with increasing m1. In T2-w iMSDE, by matching the effective echo time (TE), the SNR was equivalent when m1 was <= 1518 mT*ms2/m, however, higher m1 values (2278 - 3108 mT*ms2/m) reduced the SNR. In the patient study, iMSDE improved blood suppression but reduced vessel wall CNR efficiency in both T1-w and T2-w imaging. iMSDE also effectively suppressed residual flow artifacts in the CUBE acquisition., Conclusions: iMSDE preparation achieved better blood suppression than DIR preparation with reduced vessel wall CNR efficiency in T1-w and T2-w images. The optimized m1s are 487 mT*ms2/m for T1-w imaging and 1518 mT*ms2/m for T2-w imaging. Composite 180° refocusing pulses and sinusoidal gradients improve SNR performance. iMSDE further improves the inherent blood suppression of CUBE.

Background: Compositional and morphological features of carotid atherosclerotic plaques provide complementary information to luminal stenosis in predicting clinical presentations. However, they alone cannot predict cerebrovascular risk. Mechanical stress within the plaque induced by cyclical changes in blood pressure has potential to assess plaque vulnerability. Various modeling strategies have been employed to predict stress, including 2D and 3D structure-only, 3D one-way and fully coupled fluid-structure interaction (FSI) simulations. However, differences in stress predictions using different strategies have not been assessed., Methods: Maximum principal stress (Stress-P1) within 8 human carotid atherosclerotic plaques was calculated based on geometry reconstructed from in vivo computerized tomography and high resolution, multi-sequence magnetic resonance images. Stress-P1 within the diseased region predicted by 2D and 3D structure-only, and 3D one-way FSI simulations were compared to 3D fully coupled FSI analysis., Results: Compared to 3D fully coupled FSI, 2D structure-only simulation significantly overestimated stress level (94.1 kPa [65.2, 117.3] vs. 85.5 kPa [64.4, 113.6]; median [inter-quartile range], p=0.0004). However, when slices around the bifurcation region were excluded, stresses predicted by 2D structure-only simulations showed a good correlation (R(2)=0.69) with values obtained from 3D fully coupled FSI analysis. 3D structure-only model produced a small yet statistically significant stress overestimation compared to 3D fully coupled FSI (86.8 kPa [66.3, 115.8] vs. 85.5 kPa [64.4, 113.6]; p<0.0001). In contrast, one-way FSI underestimated stress compared to 3D fully coupled FSI (78.8 kPa [61.1, 100.4] vs. 85.5 kPa [64.4, 113.7]; p<0.0001)., Conclusions: A 3D structure-only model seems to be a computationally inexpensive yet reasonably accurate approximation for stress within carotid atherosclerotic plaques with mild to moderate luminal stenosis as compared to fully coupled FSI analysis., (Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background: Atherosclerosis is a systemic inflammatory disease that may affect multiple arterial beds simultaneously. Vascular distensibility is increasingly used in the clinical assessment of patients with atherosclerotic disease. In this study, we assess distensibility of symptomatic atherosclerotic carotid artery and of contralateral asymptomatic side. We also investigate the distensibility of bilaterally asymptomatic atherosclerotic carotid arteries using cine phase-contrast carotid magnetic resonance (MR) imaging., Methods: Nineteen patients with bilateral carotid artery disease underwent cine phase-contrast carotid imaging on a 1.5 T MR system. Ten patients had ipsilateral symptomatic carotid artery disease and contralateral asymptomatic stenosis. Nine additional patients with bilateral asymptomatic carotid artery disease constituted historical control group. Cine phase-contrast MR imaging acquired at the common carotid artery, maximum luminal stenosis, and internal carotid artery was used to determine carotid distensibility bilaterally for carotid arteries in both patient groups., Results: Symptomatic carotid arteries were found to be significantly less distensible (mean distensibility coefficient [DC] 35.4 ± 6.12 × 10(-3)/kPa) than the contralateral asymptomatic vessels (mean DC 54.4 ± 7.88 × 10(-3)/kPa, P = .03) at the level of the common carotid artery. A similar trend of high distensibility for asymptomatic side in the area of maximum stenosis and the internal carotid artery was seen, but it was not found to be statistically significant. Plaque burden was comparable between the 2 groups at all locations. DC was comparable for patients with bilateral asymptomatic carotid artery stenoses. Distensibility of bilaterally asymptomatic carotid arteries was greater than that of asymptomatic carotid artery contralateral to the symptomatic side., Conclusions: Symptomatic carotid artery is stiffer than the contralateral asymptomatic side, despite comparable plaque burden. Patients with bilateral asymptomatic carotid artery disease have comparable stiffness. Larger studies are warranted to further investigate the findings of this MR study., (Copyright © 2014 National Stroke Association. Published by Elsevier Inc. All rights reserved.)

Background: Stretch is a mechanical parameter, which has been proposed previously to affect the biological activities in different tissues. This study explored its utility in determining plaque vulnerability., Methods: One hundred and six patients with mild to moderate carotid stenosis were recruited in this study (53 symptomatic and 53 asymptomatic). High resolution, multi-sequence magnetic resonance (MR) imaging was performed to delineate various plaque components. Finite element method was used to predict high stretch concentration within the plaque., Results: During a two-year follow-up, 11 patients in symptomatic group and 3 in asymptomatic group experienced recurrent cerebrovascular events. Plaque stretch at systole and stretch variation during one cardiac cycle was greater in symptomatic group than those in the asymptomatic. Within the symptomatic group, a similar trend was observed in patients with recurrent events compared to those without., Conclusion: Plaques with high stretch concentration and large stretch variation are associated with increased risk of future cerebrovascular events.

Aim: To assess the effect of low-(10 mg) or high-(80 mg) dose atorvastatin on carotid artery distensibility in patients with asymptomatic carotid artery disease using carotid magnetic resonance imaging., Methods: Eighteen patients underwent initial 2-dimensional ECG gated-phase contrast carotid MR imaging and off-line applanation tonometry for distensibility assessment before randomisation to receive low- or high-dose statins and this was repeated at 12 weeks. Phase and magnitude images from the 2-D phase contrast acquisitions were used for quantification of distensibility and compliance coefficients and were compared between the low- and high-dose statin groups., Results: Both groups were comparable with regards to their demographics, co-morbidities and baseline cholesterol levels. After 12 weeks of high-dose statin administration, a significant decrease in LDL (p=0.003) and CRP (p=0.03) was observed. At 12 weeks, the distensibility coefficient of the common and internal carotid artery was found to be significantly higher (with respect to baseline) in the high-dose group (p=0.004 and p=0.007, respectively). The compliance coefficient was likewise found to be raised in the high-dose group when compared with the low-dose group [common carotid (p=0.002), internal carotid (p=0.009)]., Conclusions: High-dose atorvastatin tends to reduce carotid arterial stiffness, as suggested by increased distensibility and compliance coefficients; however, these results need validation through large-scale trials to fully establish their possible use in clinical practice.

Objective: Intraplaque hemorrhage is an increasingly recognized contributor to plaque instability. Neovascularization of plaque is believed to facilitate the entry of inflammatory and red blood cells (RBC). Under physiological conditions, neovessels are subject to mechanical loading from the deformation of atherosclerotic plaque by blood pressure and flow. Local mechanical environments around neovessels and their relevant pathophysiologic significance have not yet been examined., Methods and Results: Four carotid plaque samples removed at endarcterectomy were collected for histopathological examination. Neovessels and other components were manually segmented to build numerical models for mechanical analysis. Each component was assumed to be non-linear isotropic, piecewise homogeneous and incompressible. The results indicated that local maximum principal stress and stretch and their variations during one cardiac cycle were greatest around neovessels. Neovessels surrounded by RBC underwent a much larger stretch during systole than those without RBCs present nearby (median [inter quartile range]; 1.089 [1.056, 1.131] vs. 1.034 [1.020, 1.067]; p<0.0001) and much larger stress (5.3kPa [3.4, 8.3] vs. 3.1kPa [1.6, 5.5]; p<0.0001) and stretch (0.0282 [0.0190, 0.0427] vs. 0.0087 [0.0045, 0.0185]; p<0.0001) variations during the cardiac cycle., Conclusions: Local critical mechanical conditions may lead to the rupture of neovessels resulting in the formation and expansion of intraplaque hemorrhage., (Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.)

Background: Carotid plaque rupture, characterized by ruptured fibrous cap (FC), is associated with subsequent cerebrovascular events. However, ruptured FC may heal following stroke and convey decreased risk of future events. This study aims to characterize the healing process of ruptured FC by assessing the lumen conditions, quantified by the lumen curvature and roughness, using in vivo carotid cardiovascular magnetic resonance (CMR)., Methods: Patients suffering from transient ischemic attack underwent high resolution carotid MR imaging within 72 hours of the acute cerebrovascular ischemic event. CMR imaging was repeated at 3 and 12 months in 26 patients, in whom FC rupture/erosion was observed on baseline images and subsequent cerebrovascular events were recorded during the follow-up period. Lumen curvature and roughness were quantified from carotid CMR images and changes in these values were monitored on follow-up imaging., Results: Healing of ruptured plaque was observed in patients (23 out of 26) without any ischemic symptom recurrence as shown by the lumen surface becoming smoother during the follow-up period, characterized by decreasing maximum lumen curvature (p < 0.05), increasing minimum lumen curvature (p < 0.05) and decreasing lumen roughness (p < 0.05) during the one year follow-up period., Conclusions: Carotid plaque healing can be assessed by quantification of the lumen curvature and roughness and the incidence of recurrent cerebrovascular events may be high in plaques that do not heal with time. The assessment of plaque healing may facilitate risk stratification of recent stroke patients on the basis of CMR results.

Plaque haemorrhage (PH) in atherosclerotic plaques is associated with recurrent thromboembolic ischaemic events. The healing process predominantly involves the repair of the plaque rupture site and the replacement of fresh PH with chronic PH, which is either reabsorbed or replaced by fibrous tissue. The extent to which the presence of PH, and its type i.e. fresh or chronic, affects plaque stability remains unexplored. Finite element analysis (FEA)-based biomechanical stress simulations can provide quantification of the percentage contribution of PH and its types to the biomechanical stresses of plaques, thereby providing information about its role in plaque stability. Fifty-two patients with atherosclerotic carotid disease underwent high resolution magnetic resonance (MR) imaging of their carotid arteries in a 1.5 Tesla MR system. Twenty-three patients had MR-identifiable PH and were selected. Only those images of these patients were used for simulations, which had evidence of PH. Manual segmentation of plaque components, such as lipid pool, fibrous tissue, calcium and PH, was done using carotid MR images. Plaque components and vessel wall were modelled as isotropic, incompressible hyperelastic materials with non-linear properties undergoing deformation under patient-specific blood pressure loading. Two dimensional structure-only FEA was used for quantification of maximum critical stress (M-CStress) of plaques. The median M-CStress of symptomatic patients with fresh PH was 159 kPa (IQR: 114-253). Because PH usually occurs within the lipid pool, when the simulation was repeated with lipid pool replacing fresh PH to simulate the pre-rupture plaque state, M-CStress was reduced by 26% [118 kPa (IQR: 79-189) (P=0.001)]. When fresh PH was replaced with chronic PH it resulted in a 30% reduction in the M-CStress [118 kP (IQR: 79-189), (P=0.001)]. PH affects stresses within atheroma to various degrees depending on its type, thereby influencing plaque stability to a different extent, with fresh PH significantly increasing the biomechanical stresses. Plaque component-dependent stress analysis has the potential of identifying the critical nature of various plaque components., (© Springer Science+Business Media, B.V. 2010)

High mechanical stress condition over the fibrous cap (FC) has been widely accepted as a contributor to plaque rupture. The relationships between the stress, lumen curvature, and FC thickness have not been explored in detail. In this study, we investigate lumen irregularity-dependent relationships between mechanical stress conditions, local FC thickness (LT(FC)), and lumen curvature (LC(lumen)). Magnetic resonance imaging slices of carotid plaque from 100 patients with delineated atherosclerotic components were used. Two-dimensional structure-only finite element simulations were performed for the mechanical analysis, and maximum principal stress (stress-P₁) at all integral nodes along the lumen was obtained. LT(FC) and LC(lumen) were computed using the segmented contour. The lumen irregularity (L-δir) was defined as the difference between the largest and the smallest lumen curvature. The results indicated that the relationship between stress-P₁, LT(FC), and LC(lumen) is largely dependent on L-δir. When L-δir ≥ .31 (irregular lumen), stress-P₁ strongly correlated with lumen curvature and had a weak/no correlation with local FC thickness, and in 73.4% of magnetic resonance (MR) slices, the critical stress (maximum of stress-P₁ over the diseased region) was found at the site where the lumen curvature was large. When L-δir ≤ 0.28 (relatively round lumen), stress-P₁ showed a strong correlation with local FC thickness but weak/no correlation with lumen curvature, and in 71.7% of MR slices, the critical stress was located at the site of minimum FC thickness. Using lumen irregularity as a method of identifying vulnerable plaque sites by referring to the lumen shape is a novel and simple method, which can be used for mechanics-based plaque vulnerability assessment.

Background: Biomechanical stress analysis has been used for plaque vulnerability assessment. The presence of plaque hemorrhage (PH) is a feature of plaque vulnerability and is associated with thromboembolic ischemic events. The purpose of the present study was to use finite element analysis (FEA) to compare the stress profiles of hemorrhagic and non-hemorrhagic profiles., Methods and Results: Forty-five consecutive patients who had suffered a cerebrovascular ischemic event with an underlying carotid artery disease underwent high-resolution magnetic resonance imaging (MRI) of their symptomatic carotid artery in a 1.5-T MRI system. Axial images were manually segmented for various plaque components and used for FEA. Maximum critical stress (M-Cstress(SL)) for each slice was determined. Within a plaque, the maximum M-Cstress(SL) for each slice of a plaque was selected to represent the maximum critical stress of that plaque (M-Cstress(PL)) and used to compare hemorrhagic and non-hemorrhagic plaques. A total of 62% of plaques had hemorrhage. It was observed that plaques with hemorrhage had significantly higher stress (M-Cstress(PL)) than plaques without PH (median [interquartile range]: 315 kPa [247-434] vs. 200 kPa [171-282], P=0.003)., Conclusions: Hemorrhagic plaques have higher biomechanical stresses than non-hemorrhagic plaques. MRI-based FEA seems to have the potential to assess plaque vulnerability., (All rights are reserved to the Japanese Circulation Society.)

Background: Biomechanical stresses play an important role in determining plaque stability. Quantification of these simulated stresses can be potentially used to assess plaque vulnerability and differentiate different patient groups., Methods and Results: 54 asymptomatic and 45 acutely symptomatic patients underwent in vivo multicontrast magnetic resonance imaging (MRI) of the carotid arteries. Plaque geometry used for nite element analysis was derived from in vivo MRI at the sites of maximum and minimum plaque burden. In total, 198 slices were used for the computational simulations. A pre-shrink technique was used to refine the simulation. Maximum principle stress at the vulnerable plaque sites (ie, critical stress) was extracted for the selected slices and a comparison was performed between the 2 groups. Critical stress in the slice with maximum plaque burden is significantly higher in acutely symptomatic patients as compared to asymptomatic patients (median, inter quartile range: 198.0 kPa (119.8-359.0 kPa) vs 138.4 kPa (83.8-242.6 kPa), P=0.04). No significant difference was found in the slice with minimum plaque burden between the 2 groups (196.7 kPa (133.3-282.7 kPa) vs 182.4 kPa (117.2-310.6 kPa), P=0.82)., Conclusions: Acutely symptomatic carotid plaques have significantly high biomechanical stresses than asymptomatic plaques. This might be potentially useful for establishing a biomechanical risk stratification criteria based on plaque burden in future studies.

High mechanical stress in atherosclerotic plaques at vulnerable sites, called critical stress, contributes to plaque rupture. The site of minimum fibrous cap (FC) thickness (FC(MIN)) and plaque shoulder are well-documented vulnerable sites. The inherent weakness of the FC material at the thinnest point increases the stress, making it vulnerable, and it is the big curvature of the lumen contour over FC which may result in increased plaque stress. We aimed to assess critical stresses at FC(MIN) and the maximum lumen curvature over FC (LC(MAX)) and quantify the difference to see which vulnerable site had the highest critical stress and was, therefore, at highest risk of rupture. One hundred patients underwent high resolution carotid magnetic resonance (MR) imaging. We used 352 MR slices with delineated atherosclerotic components for the simulation study. Stresses at all the integral nodes along the lumen surface were calculated using the finite-element method. FC(MIN) and LC(MAX) were identified, and critical stresses at these sites were assessed and compared. Critical stress at FC(MIN) was significantly lower than that at LC(MAX) (median: 121.55 kPa; inter quartile range (IQR) = [60.70-180.32] kPa vs. 150.80 kPa; IQR = [91.39-235.75] kPa, p < 0.0001). If critical stress at FC(MIN) was only used, then the stress condition of 238 of 352 MR slices would be underestimated, while if the critical stress at LC(MAX) only was used, then 112 out of 352 would be underestimated. Stress analysis at FC(MIN) and LC(MAX) should be used for a refined mechanical risk assessment of atherosclerotic plaques, since material failure at either site may result in rupture.