Search

In reconstructive surgery, the integration of tissue-engineered cartilage in a prefabricated free flap may make it possible to generate flaps combining a variety of tissue components, to meet the special requirements of particular defects. One aim of the present study was to investigate prefabrication of a microvascular free flap by implanting a vessel loop under a skin flap in a rabbit model. A second aim was to report on the authors' preliminary experiences in prelaminating prefabricated flaps with autologous tissue-engineered cartilage, in terms of matrix development, inflammatory reaction, and host-tissue interaction. The flap was prefabricated by implanting a vessel loop under a random-pattern abdominal skin flap. The tissue-engineered cartilage constructs were made by isolating chondrocytes from auricular biopsies. Following a period of amplification, the cells were seeded onto a non-woven scaffold made of a hyaluronic-acid derivative and cultivated for 2 weeks. One cell-biomaterial construct was placed beneath the prefabicated flap, and two additional constructs were placed subcutaneously and intramuscularly. In addition, a biomaterial sample without cells was placed subcutaneously to provide a control. All implanted specimens were left in position for 6 or 12 weeks. Neovascularization in the prefabricated flap and biomaterial construct was analyzed by angiography. After explantation, the specimens were examined by histologic and immunohistochemical methods. The prefabricated flaps showed a well-developed network of blood vessels between the implanted vessel loop and the original random-pattern blood supply. The tissue-engineered constructs remained stable in size and showed signs of tissue similar to hyaline cartilage, as evidenced by the expression of cartilage-specific collagen type II and proteoglycans. No inflammatory reactions were observed. The physiologic environment of the autologous rabbit model provided favorable conditions for matrix deposition and maturation of the cell-biomaterial constructs. These initial results demonstrated the potential of prefabricating an axial perfused flap, combined with tissue-engineered cartilage, thus creating functionally competent tissue components for reconstructive surgery with minimal donor-site morbidity.

Introduction: In reconstructive surgery, the integration of tissue-engineered cartilage in a prefabricated free flap may make it possible to generate flaps combining a variety of tissue components to meet the special requirements of a particular defect. The aim of the present study was to establish the technique of prefabricating a microvascular free flap by implanting a vessel loop under a skin flap in a rabbit model. The second aim was to gather experience with prelaminating the flap with autologous tissue-engineered cartilage in terms of matrix development, inflammatory reaction and host-tissue interaction., Methods: The microvascular flap was created by implanting a vessel loop under a random pattern abdominal skin flap. The tissue-engineered cartilage constructs were made by isolating chondrocytes from auricular biopsies. Following a period of amplification, the cells were seeded onto a non-woven scaffold made of a hyaluronic acid derivative and cultivated for 2-3 weeks. One cell-biomaterial construct was placed beneath the prefabricated flap, and the others were placed subcutaneously under the abdominal skin and intermuscularly at the lower extremity. In addition, a biomaterial sample without cells was placed subcutaneously as a control. All implanted specimens were left in position for 6 or 12 weeks. After explantation, the specimens were examined by histological and immunohistological methods. The prefabricated flap was analyzed by angiography., Results: The prefabricated flaps showed a well-developed network of blood vessels formed by neovascularization between the implanted vessel loop and the original random-pattern blood supply. The tissue-engineered constructs remained stable in size and showed signs of tissue similar to hyaline cartilage, as evidenced by the expression of cartilage-specific collagen type II and proteoglycans. No hints of inflammatory reactions were observed., Conclusion: These results show the potential of prefabricated flaps as custom-made flaps for reconstructive surgery in difficult circumstances, more or less independent of anatomical prerequisites. Cartilage tissue engineering provides a 3-dimensional structure with minimal donor-site morbidity.

Introduction: Mesenchymal stem cells (MSC) have the capacity to differentiate into chondrocytes with the synthesis of cartilage. This report presents the use of human adult bone marrow derived mesenchymal stem cells for tissue engineering of autologous cartilage grafts., Methods: Human bone marrow aspirates were obtained from the iliac crest and fractionated on a Percoll gradient. The isolated hMSC were plated at 20 x 10 (6) cells per 100 mm (2) culture dish. After 21 days in culture at 37 degrees C with 5 % CO 2, the adherent multiplied MSC were trypsinized, counted, and tested for viability by trypan blue assay. The hMSCs were loaded into a sterile 15 ml polypropylene tube (0.5 Mio cells/ml) and centrifuged on the bottom of the tube at 500 g for 5 minutes. The MSC were cultivated for 3 weeks in vitro in a specific chondrogenetic medium composed of Dulbecco's Modified Eagles Medium-High Glucose supplemented with 10 ng/ml transforming growth factor-beta 1, 1 % ITS-Premix medium, 80 micro M ascorbic acid, and 100 nM dexamethasone., Results: Histological and immunohistochemical studies performed after 3 weeks in three dimensional culture demonstrated the expression of cartilage specific collagen type II and X as well as proteoglycans., Conclusion: Human adult mesenchymal stem cells derived from bone marrow aspirates have the ability to differentiate into chondrocytes under specific culture conditions by growth factors. The use of adult mesenchymal stem cells may be a promising tool for tissue engineering of autologous cartilage grafts in reconstructive surgery in the future.

For tissue engineering of cartilage, chondrocytes can be seeded in a scaffold and stimulated to produce a cartilage-like matrix. In the present study, we investigated the effect of alginate as a chondrocyte-delivery substance for the construction of cartilage grafts. E210 (a non-woven fleece of polyglactin) was used as a scaffold. When bare' E210 (without alginate and without chondrocytes) was implanted subcutaneously in nude mice for 8 weeks. the explanted tissue consisted of fat and fibrous tissue only. When E210 with alginate but without chondrocytes was implanted in nude mice, small areas of newly formed cartilage were found. Alginate seems to stimulate chondrogenesis of ingrowing cells. When chondrocytes were seeded in E210, large amounts of cartilage were found, independent of the use of alginate. This was expressed by a high concentration of glycosaminoglycans (30 microg/mg w.w.) and the presence of collagen type II (1.5 microg/mg w.w.). Macroscopically the grafts of E210 without alginate were shrunk and warped, whereas the grafts with alginate had kept their original shape during the 8 weeks of implantation. The use of alginate did not lead to inflammatory reactions nor increased capsule formation. In conclusion, the use of alginate to seed chondrocytes in E210 does not influence the amount of cartilage matrix proteins produced per tissue wet weight. However, it provides retention of the graft shape.

New cell culture techniques raise the possibility of creating cartilage in vitro with the help of tissue engineering. In this study, we compared two resorbable nonwoven cell scaffolds, a polyglycolic acid/poly-L-lactic acid (PGA/PLLA) (90/10) copolymer (Ethisorb) and pure PLLA (V 7-2), with different degradation characteristics in their aptitude for cartilage reconstruction. Chondrocytes were isolated enzymatically from human septal cartilage. The single cells were resuspended in agarose and transferred into the polymer scaffolds to create mechanical stability and retain the chondrocyte-specific phenotype. The cell-polymer constructs were then kept in perfusion culture for 1 week prior to subcutaneous transplantation into thymusaplastic nude mice. After 6, 12, and 24 weeks, the specimens were explanted and analyzed histochemically on the presence of collagen (azan staining), proteoglycans (Alcian blue staining), and calcification areas (von Kossa staining). Furthermore, different collagen types (collagen type I, which is found in most tissues, but not in hyaline cartilage matrix; and collagen type II, which is cartilage specific) were differentiated immunohistochemically by the indirect immunoperoxidase technique. Vascular ingrowth was investigated by a factor VIII antibody, which is a endothelial marker. Quantification of several matrix components was performed using the software Photoshop. Significant differences were found between both nonwoven structures concerning matrix synthesis and matrix quality as well as vascular ingrowth. Ethisorb, with a degradation time of approximately 3 weeks in vitro, showed no significant differences from normal human septal cartilage in the amount of collagen types I and II 24 weeks after transplantation. Thin fibrous tissue layers containing blood vessels encapsulated the transplants. V 7-2 constructs, which did not show strong signs of degradation even 24 weeks after transplantation, contained remarkably smaller amounts of cartilage-specific matrix components. At the same time, there was vascular ingrowth even in central parts of the transplants. In conclusion, polymer scaffolds with a short degradation time are suitable materials for the development of cartilage matrix products, while longer stability seems to inhibit matrix synthesis. Thus, in vitro engineering of human cartilage can result in a cartilage-like tissue when appropriate nonwovens are used. Therefore, this method could be the ideal cartilage replacement method without the risk of infection and with the possibility of reconstructing large defects with different configurations.

The aim of this study was to investigate the possibility of using the benzyl ester of hyaluronic acid (HYAFF 11), a recently developed semisynthetic resorbable material, as a scaffold for the culture of human nasoseptal chondrocytes in tissue-engineering procedures of cartilage reconstruction. Different techniques such as immunohistochemistry, scanning electron microscopy, and confocal laser scanning microscopy were used to study the behavior, morphology, and phenotype expression of the chondrocytes, which were initially expanded and then seeded on the material. The nonwoven cell carrier allowed good viability and adhesivity of the cells without any surface treatment with additional substances. Furthermore, the cultured cells expressed cartilage-specific collagen type II, indicating that they were able to redifferentiate within the scaffold of HYAFF 11 and were able to retain a chondrocyte phenotype even after a long period of in vitro conditions. Nevertheless, the expression of collagen type I, which was produced by dedifferentiated or incompletely redifferentiated chondrocytes, was noticeable. Additional data were obtained by subcutaneous implantation of samples seeded with human cells in the in vivo model of the athymic nude mouse. The results after 1 month revealed the development of tissue similar to hyaline cartilage. This study is promising for the use of this scaffold for tissue engineering of cartilage replacements.

In reconstructive surgery there is increasing demand for cartilage transplants to fill defects, especially nose and/or outer ear defects. Tissue engineering is one of the most modern pathways to generate autologous cartilage transplants. Isolated chondrocytes obtained from a tiny patient's biopsy were seeded on bioresorbable preshaped cell carriers to provide a 3-dimensional cell arrangement as in vivo. The combined use of these cell carriers in form of a non-woven mesh and a constant medium perfusion was performed to generate a cartilage-like cell-polymer-construct, which was finally subcutanously implanted in nude mice for full maturation. After explantation of 6 months, expression of cartilage specific extracellular matrix molecules was obvious by using histochemical and immunohistochemical methods. These data show that tissue engineering with isolated multiplied human chondrocytes from a tiny biopsy seeded on bioresorbable polymer is a promising system to generate autologous cartilage transplants for replacements in reconstructive surgery.

Background: We have developed a three-dimensional model for tissue engineering of cartilage. Chondrocytes were isolated and first multiplied in conventional monolayer cultures. Then the cells are seeded with or without agarose on special absorbable scaffolds that provided stability and enabled three-dimensional cell distribution of the tissue-engineered cartilage. The aim of the study was to investigate the possibility of avoiding agarose in tissue engineering because of the potential risk of causing an inflammatory process in later human implantation., Method: For the first time we investigated cell distribution combined with vitality directly in the cell carrier under the conditions described by using confocal laser-scanning microscopy. Working with unfixed cells, this method enables the reconstruction of three-dimensional cell cultures with suitable cell markers that closely simulates the physiologic situation, thereby exceeding each other method., Results: It was evident that agarose had no positive effect on cell distribution and vitality., Conclusion: Further experiments concerning the effect of agarose on synthesis of cartilage-specific matrix are in progress.

At the present time, the partial and/or complete reconstruction of an auricle from autologous rib cartilage is one of most widely published techniques. In the field of tissue engineering, different techniques have been described to generate cartilage tissue using isolated chondrocytes. The basis of these tissue-engineering techniques is bioresorbable or non-bioresorbable biomaterials, which serve as a three-dimensional cell carrier. Tissue engineering of an auricle requires preformed bioresorbable biomaterials designed to fit the form of a patient's auricular defect. Three-dimensional imaging acquired from computed tomography scans or laser surface scanning has become an important tool in modern medicine. This study represents the preoperative procedures for the reconstruction of an auricle through tissue engineering in accordance with the clinical aspects. Hyaff 11, a hyaluronic acid derivative, was used as a three-dimensional cell carrier for isolated human nasoseptal chondrocytes. The chondrocytes were amplified in a conventional monolayer culture before the cells were seeded on a hyaluronic non-woven mesh and cultured in vitro for 4 weeks. The chondrogenic potential of human nasal chondrocytes in Hyaff 11 was investigated by confocal laser scanning microscopy, histology (toluidine blue) and immunohistochemistry (collagen type II). Computer-aided design (CAD) and manufacture of an auricle model with stereolithographical methods were used for the prefabrication of a bioresorbable three-dimensional cell carrier designed in the form of a patient's auricular defect. The cell carrier used was Hyaff 11, a fully benzyl-esterified hyaluronic acid derivative. Confocal laser scanning microscopy has shown good cell attachment, a homogenous distribution of amplified chondrocytes and a viability of more than 90%. After 4 weeks in vitro culture the human nasoseptal chondrocytes synthesized new cartilage with the expression of cartilage-specific collagen type II. In order to shape a patient's designed scaffold the auricle model was fitted exactly and symetrically to the contralateral side. Subsequently, the mirror image patient-specific model was used to prepare an identical scaffold model made of a fully benzyl-esterified hyaluronic acid derivative. The bioresorbable scaffold that was produced gave a satisfactory representation of auricle structure. Bioresorbable preformed biomaterials in the form of a patient's auricle defect represent an important prerequisite for the tissue engineering of autologous auricle grafts. Hyaff 11 seems to be a promising material for tissue engineering of cartilage transplants, and the application of this approach will improve conventional reconstructive surgery in the future. [ABSTRACT FROM AUTHOR]