Search

Although the knee joint and temporomandibular joint (TMJ) experience similar incidence of cartilage ailments, the knee orthopedics field has greater funding and more effective end-stage treatment options. Translational research has resulted in the development of tissue-engineered products for knee cartilage repair, but the same is not true for TMJ cartilages. Here, we examine the anatomy and pathology of the joints, compare current treatments and products for cartilage afflictions, and explore ways to accelerate the TMJ field. We examine disparities, such as a 6-fold higher article count and 2,000-fold higher total joint replacement frequency in the knee compared to the TMJ, despite similarities in osteoarthritis incidence. Using knee orthopedics as a template, basic and translational research will drive the development and implementation of clinical products for the TMJ. With more funding opportunities, training programs, and federal guidance, millions of people afflicted with TMJ disorders could benefit from novel, life-changing therapeutics.

Although the knee joint and temporomandibular joint (TMJ) experience similar incidence of cartilage ailments, the knee orthopedics field has greater funding and more effective end-stage treatment options. Translational research has resulted in the development of tissue-engineered products for knee cartilage repair, but the same is not true for TMJ cartilages. Here, we examine the anatomy and pathology of the joints, compare current treatments and products for cartilage afflictions, and explore ways to accelerate the TMJ field. We examine disparities, such as a 6-fold higher article count and 2,000-fold higher total joint replacement frequency in the knee compared to the TMJ, despite similarities in osteoarthritis incidence. Using knee orthopedics as a template, basic and translational research will drive the development and implementation of clinical products for the TMJ. With more funding opportunities, training programs, and federal guidance, millions of people afflicted with TMJ disorders could benefit from novel, life-changing therapeutics.

Dermis-isolated adult stem (DIAS) cells, abundantly available, are attractive for regenerative medicine. Strategies have been devised to isolate and to chondroinduce DIAS cells from various animals. This study aimed to characterize DIAS cells from human abdominal skin (human dermis-isolated adult stem [hDIAS] cells) and to compare and to refine various chondroinduction regimens to form functional neocartilage constructs. The stemness of hDIAS cells was verified (Phase I), three chondroinduction pretreatments were compared (Phase II), and, from these, one regimen was carried forward for refinement in Phase III for improving the mechanical properties of hDIAS cell-derived constructs. Multilineage differentiation and mesenchymal stem cell markers were observed. Among various chondroinduction pretreatments, the nodule formation pretreatment yielded constructs at least 72% larger in diameter, with higher glycosaminoglycan (GAG) content by 44%, compared with other pretreatments. Furthermore, it was found that culturing cells on nontissue culture-treated surfaces yielded constructs (1) on par with constructs derived from aggrecan-coated surfaces and (2) with superior mechanical properties than constructs derived from cells cultured on tissue culture-treated surfaces. After the nodule formation pretreatment, combined supplementation of TGF-β1, IGF-I, and fetal bovine serum significantly enhanced aggregate modulus and shear modulus by 75% and 69%, respectively, over the supplementation by TGF-β1 alone. In summary, human skin-derived DIAS cells are responsive to chondroinduction for forming neocartilage. Furthermore, the mechanical properties of the resultant human constructs can be improved by treatments shown to be efficacious in animal models. Advances made toward tissue-engineering cartilage using animal cells were shown to be applicable to hDIAS cells for cartilage repair and regeneration.

Tissue engineering aims to create implantable biomaterials for the repair and regeneration of damaged tissues. In vitro tissue engineering is generally based on static culture, which limits access to nutrients and lacks mechanical signaling. Using shear stress is controversial because in some cases it can lead to cell death while in others it promotes tissue regeneration. To understand how shear stress works and how it may be used to improve neotissue function, a series of studies were performed. First, a tunable device was designed to determine optimal levels of shear stress for neotissue formation. Then, computational fluid dynamics modeling showed the device applies fluid-induced shear (FIS) stress spanning three orders of magnitude on tissue-engineered cartilage (neocartilage). A beneficial window of FIS stress was subsequently identified, resulting in up to 3.6-fold improvements in mechanical properties of neocartilage in vitro. In vivo, neocartilage matured as evidenced by the doubling of collagen content toward native values. Translation of FIS stress to human derived neocartilage was then demonstrated, yielding analogous improvements in mechanical properties, such as 168% increase in tensile modulus. To gain an understanding of the beneficial roles of FIS stress, a mechanistic study was performed revealing a mechanically gated complex on the primary cilia of chondrocytes that is activated by FIS stress. This series of studies places FIS stress into the arena as a meaningful mechanical stimulation strategy for creating robust and translatable neotissues, and demonstrates the ease of incorporating FIS stress in tissue culture.

Tissue engineering aims to create implantable biomaterials for the repair and regeneration of damaged tissues. In vitro tissue engineering is generally based on static culture, which limits access to nutrients and lacks mechanical signaling. Using shear stress is controversial because in some cases it can lead to cell death while in others it promotes tissue regeneration. To understand how shear stress works and how it may be used to improve neotissue function, a series of studies were performed. First, a tunable device was designed to determine optimal levels of shear stress for neotissue formation. Then, computational fluid dynamics modeling showed the device applies fluid-induced shear (FIS) stress spanning three orders of magnitude on tissue-engineered cartilage (neocartilage). A beneficial window of FIS stress was subsequently identified, resulting in up to 3.6-fold improvements in mechanical properties of neocartilage in vitro. In vivo, neocartilage matured as evidenced by the doubling of collagen content toward native values. Translation of FIS stress to human derived neocartilage was then demonstrated, yielding analogous improvements in mechanical properties, such as 168% increase in tensile modulus. To gain an understanding of the beneficial roles of FIS stress, a mechanistic study was performed revealing a mechanically gated complex on the primary cilia of chondrocytes that is activated by FIS stress. This series of studies places FIS stress into the arena as a meaningful mechanical stimulation strategy for creating robust and translatable neotissues, and demonstrates the ease of incorporating FIS stress in tissue culture.

Injuries to articular cartilage and menisci can lead to cartilage degeneration that ultimately results in arthritis. Different forms of arthritis affect ~50 million people in the USA alone, and it is therefore crucial to identify methods that will halt or slow the progression to arthritis, starting with the initiating events of cartilage and meniscus defects. The surgical approaches in current use have a limited capacity for tissue regeneration and yield only short-term relief of symptoms. Tissue engineering approaches are emerging as alternatives to current surgical methods for cartilage and meniscus repair. Several cell-based and tissue-engineered products are currently in clinical trials for cartilage lesions and meniscal tears, opening new avenues for cartilage and meniscus regeneration. This Review provides a summary of surgical techniques, including tissue-engineered products, that are currently in clinical use, as well as a discussion of state-of-the-art tissue engineering strategies and technologies that are being developed for use in articular cartilage and meniscus repair and regeneration. The obstacles to clinical translation of these strategies are also included to inform the development of innovative tissue engineering approaches.

Injuries to articular cartilage and menisci can lead to cartilage degeneration that ultimately results in arthritis. Different forms of arthritis affect ~50 million people in the USA alone, and it is therefore crucial to identify methods that will halt or slow the progression to arthritis, starting with the initiating events of cartilage and meniscus defects. The surgical approaches in current use have a limited capacity for tissue regeneration and yield only short-term relief of symptoms. Tissue engineering approaches are emerging as alternatives to current surgical methods for cartilage and meniscus repair. Several cell-based and tissue-engineered products are currently in clinical trials for cartilage lesions and meniscal tears, opening new avenues for cartilage and meniscus regeneration. This Review provides a summary of surgical techniques, including tissue-engineered products, that are currently in clinical use, as well as a discussion of state-of-the-art tissue engineering strategies and technologies that are being developed for use in articular cartilage and meniscus repair and regeneration. The obstacles to clinical translation of these strategies are also included to inform the development of innovative tissue engineering approaches.

The zygapophysial joint, a diarthrodial joint commonly referred to as the facet joint, plays a pivotal role in back pain, a condition that has been a leading cause of global disability since 1990. Along with the intervertebral disc, the facet joint supports spinal motion and aids in spinal stability. Highly susceptible to early development of osteoarthritis, the facet is responsible for a significant amount of pain in the low-back, mid-back, and neck regions. Current noninvasive treatments cannot offer long-term pain relief, while invasive treatments can relieve pain but fail to preserve joint functionality. This review presents an overview of the facet in terms of its anatomy, functional properties, problems, and current management strategies. Furthermore, this review introduces the potential for regeneration of the facet and particular engineering strategies that could be employed as a long-term treatment.

The zygapophysial joint, a diarthrodial joint commonly referred to as the facet joint, plays a pivotal role in back pain, a condition that has been a leading cause of global disability since 1990. Along with the intervertebral disc, the facet joint supports spinal motion and aids in spinal stability. Highly susceptible to early development of osteoarthritis, the facet is responsible for a significant amount of pain in the low-back, mid-back, and neck regions. Current noninvasive treatments cannot offer long-term pain relief, while invasive treatments can relieve pain but fail to preserve joint functionality. This review presents an overview of the facet in terms of its anatomy, functional properties, problems, and current management strategies. Furthermore, this review introduces the potential for regeneration of the facet and particular engineering strategies that could be employed as a long-term treatment.

Chondral lesions frequently occur in different topographic locations of the knee. This study evaluated the functional properties among the articulating surfaces of the tibiofemoral and patellofemoral joints, and whether neo-cartilage engineered using chondrocytes from different knee locations would reflect these differences. The biomechanical properties of bovine cartilage isolated from eight locations within the tibiofemoral (medial and lateral condyle, medial and lateral tibial plateau) and patellofemoral joints (medial and lateral trochlea, medial and lateral patella) were examined. Tensile Young's moduli (tensile moduli) and aggregate moduli of the medial condyle were lower than those of the medial tibial plateau (6.11 ± 0.89 MPa vs. 7.19 ± 1.05 MPa, p = 0.04 and 354.4 ± 38.3 kPa vs. 419.4 ± 31.3 kPa, p = 0.002, respectively). Patella tensile and compressive moduli were lower than the trochlea (4.79 ± 2.01 MPa vs. 6.91 ± 2.46 MPa, p = 0.01 and 337.4 ± 37.2 kPa vs. 389.1 ± 38.3 kPa, p = 0.0005, respectively). Furthermore, chondrocytes from the above locations were used to engineer neo-cartilage, and its respective properties were evaluated. In neo-cartilage, medial condyle tensile and aggregate moduli were lower than in the medial tibial plateau (0.96 ± 0.23 MPa vs. 1.31 ± 0.31 MPa, p = 0.02, and 115.8 ± 26.0 kPa vs. 160.8 ± 18.8 kPa, p = 0.001, respectively). Compared to trochlear chondrocytes, neo-cartilage formed from patellar chondrocytes exhibited lower tensile and compressive moduli (1.16 ± 0.27 MPa vs. 0.74 ± 0.25 MPa, p

Chondral lesions frequently occur in different topographic locations of the knee. This study evaluated the functional properties among the articulating surfaces of the tibiofemoral and patellofemoral joints, and whether neo-cartilage engineered using chondrocytes from different knee locations would reflect these differences. The biomechanical properties of bovine cartilage isolated from eight locations within the tibiofemoral (medial and lateral condyle, medial and lateral tibial plateau) and patellofemoral joints (medial and lateral trochlea, medial and lateral patella) were examined. Tensile Young's moduli (tensile moduli) and aggregate moduli of the medial condyle were lower than those of the medial tibial plateau (6.11 ± 0.89 MPa vs. 7.19 ± 1.05 MPa, p = 0.04 and 354.4 ± 38.3 kPa vs. 419.4 ± 31.3 kPa, p = 0.002, respectively). Patella tensile and compressive moduli were lower than the trochlea (4.79 ± 2.01 MPa vs. 6.91 ± 2.46 MPa, p = 0.01 and 337.4 ± 37.2 kPa vs. 389.1 ± 38.3 kPa, p = 0.0005, respectively). Furthermore, chondrocytes from the above locations were used to engineer neo-cartilage, and its respective properties were evaluated. In neo-cartilage, medial condyle tensile and aggregate moduli were lower than in the medial tibial plateau (0.96 ± 0.23 MPa vs. 1.31 ± 0.31 MPa, p = 0.02, and 115.8 ± 26.0 kPa vs. 160.8 ± 18.8 kPa, p = 0.001, respectively). Compared to trochlear chondrocytes, neo-cartilage formed from patellar chondrocytes exhibited lower tensile and compressive moduli (1.16 ± 0.27 MPa vs. 0.74 ± 0.25 MPa, p

Scaffold-free systems have emerged as viable approaches for engineering load-bearing tissues. However, the tensile properties of engineered tissues have remained far below the values for native tissue. Here, by using self-assembled articular cartilage as a model to examine the effects of intermittent and continuous tension stimulation on tissue formation, we show that the application of tension alone, or in combination with matrix remodelling and synthesis agents, leads to neocartilage with tensile properties approaching those of native tissue. Implantation of tension-stimulated tissues results in neotissues that are morphologically reminiscent of native cartilage. We also show that tension stimulation can be translated to a human cell source to generate anisotropic human neocartilage with enhanced tensile properties. Tension stimulation, which results in nearly sixfold improvements in tensile properties over unstimulated controls, may allow the engineering of mechanically robust biological replacements of native tissue.

Scaffold-free systems have emerged as viable approaches for engineering load-bearing tissues. However, the tensile properties of engineered tissues have remained far below the values for native tissue. Here, by using self-assembled articular cartilage as a model to examine the effects of intermittent and continuous tension stimulation on tissue formation, we show that the application of tension alone, or in combination with matrix remodelling and synthesis agents, leads to neocartilage with tensile properties approaching those of native tissue. Implantation of tension-stimulated tissues results in neotissues that are morphologically reminiscent of native cartilage. We also show that tension stimulation can be translated to a human cell source to generate anisotropic human neocartilage with enhanced tensile properties. Tension stimulation, which results in nearly sixfold improvements in tensile properties over unstimulated controls, may allow the engineering of mechanically robust biological replacements of native tissue.

Abundance and accessibility render skin-derived stem cells an attractive cell source for tissue engineering applications. Toward assessing their utility, the variability of constructs engineered from human dermis-isolated adult stem (hDIAS) cells was examined with respect to different anatomical locations (foreskin, breast, and abdominal skin), both in vitro and in a subcutaneous, athymic mouse model. All anatomical locations yielded hDIAS cells with multi-lineage differentiation potentials, though adipogenesis was not seen for foreskin-derived hDIAS cells. Using engineered cartilage as a model, tissue engineered constructs from hDIAS cells were compared. Construct morphology differed by location. The mechanical properties of human foreskin- and abdominal skin-derived constructs were similar at implantation, remaining comparable after 4 additional weeks of culture in vivo. Breast skin-derived constructs were not mechanically testable. For all groups, no signs of abnormality were observed in the host. Addition of aggregate redifferentiation culture prior to construct formation improved chondrogenic differentiation of foreskin-derived hDIAS cells, as evident by increases in glycosaminoglycan and collagen contents. More robust Alcian blue staining and homogeneous cell populations were also observed compared to controls. Human DIAS cells elicited no adverse host responses, reacted positively to chondrogenic regimens, and possessed multi-lineage differentiation potential with the caveat that efficacy may differ by anatomical origin of the skin. Taken together, these results suggest that hDIAS cells hold promise as a potential cell source for a number of tissue engineering applications.

Abundance and accessibility render skin-derived stem cells an attractive cell source for tissue engineering applications. Toward assessing their utility, the variability of constructs engineered from human dermis-isolated adult stem (hDIAS) cells was examined with respect to different anatomical locations (foreskin, breast, and abdominal skin), both in vitro and in a subcutaneous, athymic mouse model. All anatomical locations yielded hDIAS cells with multi-lineage differentiation potentials, though adipogenesis was not seen for foreskin-derived hDIAS cells. Using engineered cartilage as a model, tissue engineered constructs from hDIAS cells were compared. Construct morphology differed by location. The mechanical properties of human foreskin- and abdominal skin-derived constructs were similar at implantation, remaining comparable after 4 additional weeks of culture in vivo. Breast skin-derived constructs were not mechanically testable. For all groups, no signs of abnormality were observed in the host. Addition of aggregate redifferentiation culture prior to construct formation improved chondrogenic differentiation of foreskin-derived hDIAS cells, as evident by increases in glycosaminoglycan and collagen contents. More robust Alcian blue staining and homogeneous cell populations were also observed compared to controls. Human DIAS cells elicited no adverse host responses, reacted positively to chondrogenic regimens, and possessed multi-lineage differentiation potential with the caveat that efficacy may differ by anatomical origin of the skin. Taken together, these results suggest that hDIAS cells hold promise as a potential cell source for a number of tissue engineering applications.

Effective early disease modifying options for osteoarthritis remain lacking. Tissue engineering approach to generate cartilage in vitro has emerged as a promising option for articular cartilage repair and regeneration. Signaling molecules and matrix modifying agents, derived from knowledge of cartilage development and homeostasis, have been used as biochemical stimuli toward cartilage tissue engineering and have led to improvements in the functionality of engineered cartilage. Clinical translation of neocartilage faces challenges, such as phenotypic instability of the engineered cartilage, poor integration, inflammation, and catabolic factors in the arthritic environment; these can all contribute to failure of implanted neocartilage. A comprehensive understanding of signaling molecules involved in osteoarthritis pathogenesis and their actions on engineered cartilage will be crucial. Thus, while it is important to continue deriving inspiration from cartilage development and homeostasis, it has become increasingly necessary to incorporate knowledge from osteoarthritis pathogenesis into cartilage tissue engineering.

Effective early disease modifying options for osteoarthritis remain lacking. Tissue engineering approach to generate cartilage in vitro has emerged as a promising option for articular cartilage repair and regeneration. Signaling molecules and matrix modifying agents, derived from knowledge of cartilage development and homeostasis, have been used as biochemical stimuli toward cartilage tissue engineering and have led to improvements in the functionality of engineered cartilage. Clinical translation of neocartilage faces challenges, such as phenotypic instability of the engineered cartilage, poor integration, inflammation, and catabolic factors in the arthritic environment; these can all contribute to failure of implanted neocartilage. A comprehensive understanding of signaling molecules involved in osteoarthritis pathogenesis and their actions on engineered cartilage will be crucial. Thus, while it is important to continue deriving inspiration from cartilage development and homeostasis, it has become increasingly necessary to incorporate knowledge from osteoarthritis pathogenesis into cartilage tissue engineering.

Tissue-engineered musculoskeletal soft tissues typically lack the appropriate mechanical robustness of their native counterparts, hindering their clinical applicability. With structure and function being intimately linked, efforts to capture the anatomical shape and matrix organization of native tissues are imperative to engineer functionally robust and anisotropic tissues capable of withstanding the biomechanically complex in vivo joint environment. The present study sought to tailor the use of passive axial compressive loading to drive matrix synthesis and reorganization within self-assembled, shape-specific fibrocartilaginous constructs, with the goal of developing functionally anisotropic neotissues. Specifically, shape-specific fibrocartilaginous neotissues were subjected to 0, 0.01, 0.05, or 0.1 N axial loads early during tissue culture. Results found the 0.1-N load to significantly increase both collagen and glycosaminoglycan synthesis by 27% and 67%, respectively, and to concurrently reorganize the matrix by promoting greater matrix alignment, compaction, and collagen crosslinking compared with all other loading levels. These structural enhancements translated into improved functional properties, with the 0.1-N load significantly increasing both the relaxation modulus and Young's modulus by 96% and 255%, respectively, over controls. Finite element analysis further revealed the 0.1-N uniaxial load to induce multiaxial tensile and compressive strain gradients within the shape-specific neotissues, with maxima of 10.1%, 18.3%, and -21.8% in the XX-, YY-, and ZZ-directions, respectively. This indicates that strains created in different directions in response to a single axis load drove the observed anisotropic functional properties. Together, results of this study suggest that strain thresholds exist within each axis to promote matrix synthesis, alignment, and compaction within the shape-specific neotissues. Tailoring of passive axial loading, thus, presents as a simple, yet effective way to drive in vitro matrix development in shape-specific neotissues toward more closely achieving native structural and functional properties.

Tissue-engineered musculoskeletal soft tissues typically lack the appropriate mechanical robustness of their native counterparts, hindering their clinical applicability. With structure and function being intimately linked, efforts to capture the anatomical shape and matrix organization of native tissues are imperative to engineer functionally robust and anisotropic tissues capable of withstanding the biomechanically complex in vivo joint environment. The present study sought to tailor the use of passive axial compressive loading to drive matrix synthesis and reorganization within self-assembled, shape-specific fibrocartilaginous constructs, with the goal of developing functionally anisotropic neotissues. Specifically, shape-specific fibrocartilaginous neotissues were subjected to 0, 0.01, 0.05, or 0.1 N axial loads early during tissue culture. Results found the 0.1-N load to significantly increase both collagen and glycosaminoglycan synthesis by 27% and 67%, respectively, and to concurrently reorganize the matrix by promoting greater matrix alignment, compaction, and collagen crosslinking compared with all other loading levels. These structural enhancements translated into improved functional properties, with the 0.1-N load significantly increasing both the relaxation modulus and Young's modulus by 96% and 255%, respectively, over controls. Finite element analysis further revealed the 0.1-N uniaxial load to induce multiaxial tensile and compressive strain gradients within the shape-specific neotissues, with maxima of 10.1%, 18.3%, and -21.8% in the XX-, YY-, and ZZ-directions, respectively. This indicates that strains created in different directions in response to a single axis load drove the observed anisotropic functional properties. Together, results of this study suggest that strain thresholds exist within each axis to promote matrix synthesis, alignment, and compaction within the shape-specific neotissues. Tailoring of passive axial loading, thus, presents as a simple, yet effective way to drive in vitro matrix development in shape-specific neotissues toward more closely achieving native structural and functional properties.

PurposeThe purposes of this study were to identify differences in the biomechanical and biochemical properties among the articulating surfaces of the ankle joint and to evaluate the functional and biological properties of engineered neocartilage generated using chondrocytes from different locations in the ankle joint.MethodsThe properties of the different topographies within the ankle joint (tibial plafond, talar dome, and distal fibula) were evaluated in 28 specimens using 7 bovine ankles; the femoral condyle was used as a control. Chondrocytes from the same locations were used to form 28 neocartilage constructs by tissue engineering using an additional 7 bovine ankles. The functional properties of neocartilage were compared with native tissue values.ResultsArticular cartilage from the tibial plafond, distal fibula, talar dome, and femoral condyle exhibited Young modulus values of 4.8 ± 0.5 MPa, 3.9 ± 0.1 MPa, 1.7 ± 0.2 MPa, and 4.0 ± 0.5 MPa, respectively. The compressive properties of the corresponding tissues were 370 ± 22 kPa, 242 ± 18 kPa, 255 ± 26 kPa, and 274 ± 18 kPa, respectively. The tibial plafond exhibited 3-fold higher tensile properties and 2-fold higher compressive and shear moduli compared with its articulating talar dome; the same disparity was observed in neocartilage. Similar trends were detected in biochemical data for both native and engineered tissues.ConclusionsThe cartilage properties of the various topographic locations within the ankle are significantly different. In particular, the opposing articulating surfaces of the ankle have significantly different biomechanical and biochemical properties. The disparity between tibial plafond and talar dome cartilage and chondrocytes warrants further evaluation in clinical studies to evaluate their exact role in the pathogenesis of ankle lesions.Clinical relevanceTherapeutic modalities for cartilage lesions need to consider the exact topographic source of the cells or cartilage grafts used. Furthermore, the capacity of generating neocartilage implants from location-specific chondrocytes of the ankle joint may be used in the future as a tool for the treatment of chondral lesions.

PurposeThe purposes of this study were to identify differences in the biomechanical and biochemical properties among the articulating surfaces of the ankle joint and to evaluate the functional and biological properties of engineered neocartilage generated using chondrocytes from different locations in the ankle joint.MethodsThe properties of the different topographies within the ankle joint (tibial plafond, talar dome, and distal fibula) were evaluated in 28 specimens using 7 bovine ankles; the femoral condyle was used as a control. Chondrocytes from the same locations were used to form 28 neocartilage constructs by tissue engineering using an additional 7 bovine ankles. The functional properties of neocartilage were compared with native tissue values.ResultsArticular cartilage from the tibial plafond, distal fibula, talar dome, and femoral condyle exhibited Young modulus values of 4.8 ± 0.5 MPa, 3.9 ± 0.1 MPa, 1.7 ± 0.2 MPa, and 4.0 ± 0.5 MPa, respectively. The compressive properties of the corresponding tissues were 370 ± 22 kPa, 242 ± 18 kPa, 255 ± 26 kPa, and 274 ± 18 kPa, respectively. The tibial plafond exhibited 3-fold higher tensile properties and 2-fold higher compressive and shear moduli compared with its articulating talar dome; the same disparity was observed in neocartilage. Similar trends were detected in biochemical data for both native and engineered tissues.ConclusionsThe cartilage properties of the various topographic locations within the ankle are significantly different. In particular, the opposing articulating surfaces of the ankle have significantly different biomechanical and biochemical properties. The disparity between tibial plafond and talar dome cartilage and chondrocytes warrants further evaluation in clinical studies to evaluate their exact role in the pathogenesis of ankle lesions.Clinical relevanceTherapeutic modalities for cartilage lesions need to consider the exact topographic source of the cells or cartilage grafts used. Furthermore, the capacity of generating neocartilage implants from location-specific chondrocytes of the ankle joint may be used in the future as a tool for the treatment of chondral lesions.