Search

This paper describes the implementation of a four-pole neutral-point-clamped (NPC) three-phase inverter that produces virtually no common-mode voltage. The low common-mode voltage output is achieved by constraining the switch states of the NPC inverter to only those states that produce zero common-mode voltage in dead-time compensation, which enhances the capability of the circuit to produce low common-mode voltage by compensating common-mode voltages produced by reverse diode commutations. The low common-mode voltage performance is achieved at the expense of reduced voltage utilization and loss of dc-link voltage balance control. In order to overcome this limitation, a fourth pole and associated control are added to balance the upper and lower dc-link voltages. This paper describes the control implementations and simulation results compared to measured results used in tuning and commissioning of the system. A 450-V 78-kW system is implemented in hardware, and experimental results are provided, showing its differential mode transient and steady-state harmonic performance as well as its common-mode output voltage. [ABSTRACT FROM AUTHOR]

A mathematical model that is developed for a generalized drive system, including common-mode passive and active elements, is used to explore the issues of paralleling soft-switched resonant dc-link drive systems. Differences between the modulation pattern for each drive system cause common voltage disturbances, which lead to significant circulating currents between the drive systems. Control methods for actively compensating for common-mode circulating currents or reducing the common-mode voltage disturbances are investigated. Practical modifications to the drive system controls are implemented to reduce the circulating currents between paralleled systems. [ABSTRACT FROM AUTHOR]