Search

Bismuth oxyhalides (BiOX, X = F, Cl, Br, I) are emerging energy materials because of their remarkable catalytic activity. The BiOX compounds usually have a tetragonal type crystal structure with unique layered morphology consisting of [X-Bi-O-Bi-X] sheets. Although the BiOX nanosheets exposed with {001} facets perform superior photoactivity, there is lack of understanding about their capability in the electrochemical CO2 reduction reaction (CO2RR). Herein, we adopt wet-chemical syntheses to make 2D BiOCl and Pd-doped BiOCl nanosheets for CO2RR. In the results, formic acid is the only one kind of product converted from CO2 along with H2 gas from water reduction over both BiOCl and Pd-doped BiOCl nanosheets. By thorough analyses with ex situ and in situ spectroscopy, the results reflect that (1) metallic Bi0 atoms generated by the applied negative potentials serve as the catalytic sites for the hydrogen evolution reaction (HER) and CO2RR and (2) the existence of doped Pd ions in the BiOCl structure reduces the barrier of charge transfer over the nanosheets, which enhances HER and CO2RR activities. We believe that the observations are important references for making catalysts toward CO2RR performance.

Professor Chia-Kuang (Frank) Tsung made his scientific impact primarily through the atomic-level design of nanoscale materials for application in heterogeneous catalysis. He approached this challenge from two directions: above and below the material surface. Below the surface, Prof. Tsung synthesized finely controlled nanoparticles, primarily of noble metals and metal oxides, tailoring their composition and surface structure for efficient catalysis. Above the surface, he was among the first to leverage the tunability and stability of metal-organic frameworks (MOFs) to improve heterogeneous, molecular, and biocatalysts. This article, written by his former students, seeks first to commemorate Prof. Tsung's scientific accomplishments in three parts: (1) rationally designing nanocrystal surfaces to promote catalytic activity; (2) encapsulating nanocrystals in MOFs to improve catalyst selectivity; and (3) tuning the host-guest interaction between MOFs and guest molecules to inhibit catalyst degradation. The subsequent discussion focuses on building on the foundation laid by Prof. Tsung and on his considerable influence on his former group members and collaborators, both inside and outside of the lab.

Modulation of bimetallic nanocatalysts with atomic precision would allow for significant increases in catalyst activity through the optimization of heteroatomic interplay. In practice, this level o...

Advances in new systems of organic–inorganic hybrid nanocomposites are less prevalent, owing to a lack of facile strategies for precise control of their structures, compositions, and, hence, their properties. In this work, Au-BINOL hybrid nanocomposites with eccentric and concentric nanostructures were produced. The hybrid nanocomposites containing two distinct moieties of inorganic Au nanocrystals and organic BINOL nanospheres were applied to the catalytic hydrogenation of 4-nitrophenol with NaBH4 in the aqueous phase with and without the illumination of visible light. Here, we demonstrate that the existence of Au–BINOL interfaces offers benefits to their performance. The eccentric nanostructures made with CTAC show the superior activity from large Au–BINOL interfaces formed between the BINOL nanospheres and the faces of Au nanoplates. They further exhibit a high Au localized surface plasmon resonance (LSPR)-enhancement effect on the photoreduction of 4-nitrophenol, which is attributed to the strong LSPR...

Control of morphology in the synthesis of Rh nanocrystals can be used to precisely tailor the electronic surface structure; this in turn directly influences their performance in catalysis applications. Many works bring attention to the development of Rh nanostructures with low-index surfaces, but limited effort has been placed on the study of high-index and surface-defect-enriched nanocrystals as they are not favored by thermodynamics due to the involvement of high-energy surfaces and increased surface-to-volume ratios. In this work, we demonstrate an aqueous synthesis of concave Rh nanotetrahedra (CTDs) serving as efficient catalysts for energy conversion reactions. CTDs are surface-defect-rich structures that form through a slow growth rate and follow the four-step model of metallic nanoparticle growth. By tuning the surfactant concentration, the morphology of Rh CTDs evolved into highly excavated nanotetrahedra (HETDs) and twinned nanoparticles (TWs). Unlike the CTD surfaces with abundant adatoms and v...

Platinum was coated on the surfaces of copper nanocubes to form Cu–CuPt core–alloy–frame nanocrystals with a rhombic dodecahedral (RD) shape. Co-reduction of Pt2+ ions and residual Cu+ ions in the supernatant of the Cu nanocube solution followed by the interdiffusion of Cu and Pt atoms over the core–shell interface allowed their formation. Growth in the ⟨100⟩ directions of the {100}-terminated Cu nanocubes resulted in the {110}-faceted rhombic dodecahedra. By the introduction of additional Pt precursor, the {100} vertices of the Cu–CuPt RD nanocrystals could be selectively extended to form spiny CuPt RD nanocrystals. After removing the Cu core template, both CuPt alloy RD and spiny CuPt alloy RD nanoframes (NFs) were obtained with Pt/Cu ratios of 26/74 and 41/59, respectively. Abundant surface defects render them highly active catalysts due to the open frame structure of both sets of NFs. The spiny RD NFs showed superior specific activity toward the oxygen reduction reaction, 1.3 and 3 times to those of t...

Controlling the surface composition of shaped bimetallic nanoparticles could offer precise tunability of geometric and electronic surface structure for new nanocatalysts. To achieve this goal, a platform for studying the intermixing process in a shaped nanoparticle was designed, using multilayered Pd-Ni-Pt core-shell nanocubes as precursors. Under mild conditions, the intermixing between Ni and Pt could be tuned by changing layer thickness and number, triggering intermixing while preserving nanoparticle shape. Intermixing of the two metals is monitored using transmission electron microscopy. The surface structure evolution is characterized using electrochemical methanol oxidation. DFT calculations suggest that the low-temperature mixing is enhanced by shorter diffusion lengths and strain introduced by the layered structure. The platform and insights presented are an advance toward the realization of shape-controlled multimetallic nanoparticles tailored to each potential application.

In this study, CuFeO2 and Mg-doped CuFeO2 powders are synthesized by using a novel chemical solution route under an ambient atmosphere. By regulating the pH of the reaction solution, on the basis of Pourbaix diagrams, and the stoichiometric ratio of copper to iron ions, delafossite CuFeO2 powders are formed at 363 K in an aqueous solution. Mg-doped CuFeO2 powders are also synthesized by using the same chemical route with the trace addition of Mg(II) ions. From the powder X-ray diffraction results, all diffraction peaks are of the delafossite structure with dominated 3R phase and few 2H phase. X-ray photoelectron spectroscopy measurements show that the chemical environments of the Cu and Fe ions are consistent with the binding energies of Cu(I) and Fe(III) in the delafossite structure of CuFeO2. The UV–vis spectra show that the CuFeO2 and Mg-doped CuFeO2 powders are both able to absorb light with wavelengths ranging from 300 to 700 nm. The calculated optical band gaps of the CuFeO2 and Mg-doped CuFeO2 powders are 1.35 and 1.5 eV, respectively. With regard to the application of the powders in the photodegradation of 50 ppm methylene blue, the results suggest that at an incident light irradiation of AM 1.5G, the photodegradation efficiency of the Mg-doped CuFeO2 powder is remarkably better than that of the CuFeO2 powder, which can be attributed to its higher carrier concentration. Furthermore, at an external bias of −1.2 V, these delafossite catalysts are able to convert CO2 to ethylene glycol through an electrocatalytic reaction.

Sub-1 nm PtSn nanosheets of 0.6–0.9 nm in thickness were synthesized via a solution colloidal method and were applied as electrooxidation catalysts for methanol oxidation reaction (MOR) and ethanol oxidation (EOR) in alkaline and acid environments. Owing to the specific structural and compositional characteristics, the as-prepared PtSn nanosheets exhibits superior activity and durability relative to commercial Pt black and Pt/carbon catalysts. PtSn nanosheets not only exhibit an outstanding mass activity in MOR (871.6 mA mg Pt−1), which is 2.3 times (371 mA mg Pt−1) and 10.1 times (86.1 mA mg Pt−1) higher than that of commercial Pt/carbon and Pt black respectively, but also display an mass activity in EOR (673.6 mA mg Pt−1) with 5.3 times higher commercial Pt black (127.7 mA mg Pt−1) and 2.3 times higher than commercial Pt/C catalyst (295 mA mgPt−1). The reported value is the highest activity in both MOR and EOR examinations compared to the reported PtSn-based electrocatalysts,. The improved performance may be due to the highly-reactive exposed (1 1 1) facet sites resulted from its sub-1 nm 2D sheet like morphology.

Bimetallic nanoparticle catalysts provide enhanced activity, as combining metals allows tuning of electronic and geometric structure, but the enhancement may vary during the reaction because the nanoparticles can undergo metal migration under catalytic reaction conditions. Using cyclic voltammetry to track the surface composition over time, we carried out a detailed study of metal migration in a well-defined model Au-Pd core-shell nanocatalyst. When subjected to electrochemical conditions, Au migration from the core to the shell was observed. The effect of Pd shell thickness and electrolyte identity on the extent of migration was studied. Migration of metals during catalytic ethanol oxidation was found to alter the particle's surface composition and electronic structure, enhancing the core-shell particles' activity. We show that metal migration in core-shell nanoparticles is a phenomenon common to numerous electrochemical systems and must be considered when studying electrochemical catalysis.

Developing syntheses of more sophisticated nanostructures comprising late transition metals broadens the tools to rationally design suitable heterogeneous catalysts for chemical transformations. Herein, we report a synthesis of Pd-Rh nanoboxes by controlling the migration of metals in a core-shell nanoparticle. The Pd-Rh nanobox structure is a grid-like arrangement of two distinct metal phases, and the surfaces of these boxes are {100} dominant Pd and Rh. The catalytic behaviors of the particles were examined in electrochemistry to investigate strain effects arising from this structure. It was found that the trends in activity of model fuel cell reactions cannot be explained solely by the surface composition. The lattice strain emerging from the nanoscale separation of metal phases at the surface also plays an important role.

Colloidal techniques were used to synthesize monodisperse Pt nanoparticles of four distinct sizes between 2 and 7 nm before immobilization onto silica. Ethylene hydrogenation demonstrated structure-insensitive behavior with TOFs of ∼12 s–1 before poisoning. With thiophene being a strong binding adsorbate, TOFs decreased by orders of magnitude, and the poisoning-induced antipathetic structure sensitivity because thiophene adsorbed more strongly to the coordinatively unsaturated, as compared with coordinatively saturated, surfaces, and the degree of saturation increased with decreasing Pt size. This effort is part of a broader study in which structure sensitivity is analyzed for adsorbates in complex reaction networks.

We report highly facet-dependent electrical properties of Cu(2)O nanocubes and octahedra and significant enhancement of gold nanocrystal cores to the electrical conductivity of Au-Cu(2)O core-shell octahedra. Cu(2)O nanocubes and octahedra and Au-Cu(2)O core-shell cubes and octahedra were synthesized by following our reported facile procedures at room temperature. Two oxide-free tungsten probes attached to a nanomanipulator installed inside a scanning electron microscope made contacts to a single Cu(2)O nanocrystal for the I-V measurements. Pristine Cu(2)O octahedra bounded by {111} facets are 1100 times more conductive than pristine Cu(2)O cubes enclosed by {100} faces, which are barely conductive. Core-shell cubes are only slightly more conductive than pristine cubes. A 10,000-fold increase in conductivity over a cube has been recorded for an octahedron. Remarkably, core-shell octahedra are far more conductive than pristine octahedra. The same facet-dependent electrical behavior can still be observed on a single nanocrystal exposing both {111} and {100} facets. This new fundamental property may be observable in other semiconductor nanocrystals. We also have shown that both core-shell cubes and octahedra outperform pristine cubes and octahedra in the photodegradation of methyl orange. Efficient photoinduced charge separation is attributed to this enhanced photocatalytic activity. Interestingly, facet-selective etching occurred over the {100} corners of some octahedra and core-shell octahedra during photocatalysis. The successful preparation of Au-Cu(2)O core-shell heterostructures with precise shape control has offered opportunities to discover new and exciting physical and chemical properties of nanocrystals.

Summary The ability to prepare inorganic nanocrystals with well-defined morphologies and sharp faces should facilitate the examination of their facet-dependent surface, catalytic, electrical, and other properties. In this review we cover different synthetic methods for the growth of Cu 2 O nanocrystals with morphological control. Cu 2 O nanocrystals with cubic, cuboctahedral, truncated octahedral, octahedral, and multipod structures have been prepared mainly by wet chemical, electrodeposition, and solvothermal synthesis methods. Methods used for the formation of hollow Cu 2 O nanocubes, octahedra, and truncated rhombic dodecahedra are also presented. Morphology of Cu 2 O nanocrystals can be expanded with the use of gold nanocrystal cores to guide the overgrowth of Cu 2 O shells. Surface properties of Cu 2 O nano- and microcrystals with sharp faces have been examined in a few studies. The {1 1 1} faces were found to interact well with negatively charged molecules, while the {1 0 0} faces are less sensitive to molecular charges. Preferential adsorption of sodium dodecyl sulfate molecules on the {1 1 1} faces of Cu 2 O crystals has been demonstrated via plane-selective deposition of gold nanoparticles on only the {1 0 0} faces. It is expected that the development of improved synthetic methods for Cu 2 O nanocrystals and more knowledge of their facet-dependent properties should lead to their applications in photoactivated energy conversion and catalysis.

The effect of lattice strain on the catalytic properties of Pd nanoparticles is systematically studied. Synthetic strategies for the preparation of a series of shape-controlled Pd nanocrystals with lattice strain generated from different sources has been developed. All of these nanocrystals were created with the same capping agent under similar reaction conditions. First, a series of Pd nanoparticles was synthesized that were enclosed in {111} surfaces: Single-crystalline Pd octahedra, single-crystalline AuPd core–shell octahedra, and twinned Pd icosahedra. Next, various {100}-terminated particles were synthesized: Single-crystalline Pd cubes and single-crystalline AuPd core–shell cubes. Different extents of lattice strain were evident by comparing the X-ray diffraction patterns of these particles. During electrocatalysis, decreased potentials for CO stripping and increased current densities for formic-acid oxidation were observed for the strained nanoparticles. In the gas-phase hydrogenation of ethylene, the activities of the strained nanoparticles were lower than those of the single-crystalline Pd nanoparticles, perhaps owing to a larger amount of cetyl trimethylammonium bromide on the surface.

Metal nanocrystals (NCs) comprising rhodium are heterogeneous catalysts for CO oxidation, NO reduction, hydrogenations, electro-oxidations, and hydroformylation reactions. It has been demonstrated that control of structure at the nanoscale can enhance the performance of a heterogeneous metal catalyst, such as Rh, but molecular-level control of NCs comprising this metal is less studied compared to gold, silver, platinum, and palladium. We report an iodide-mediated epitaxial overgrowth of Rh by using the surfaces of well-defined foreign metal crystals as substrates to direct the Rh surface structures. The epigrowth can be accomplished on different sizes, morphologies, and identities of metal substrates. The surface structures of the resulting bimetallic NCs were studied using electron microscopy, and their distinct catalytic behaviors were examined in CO stripping and the electro-oxidation of formic acid. Iodide was found to play a crucial role in the overgrowth mechanism. With the addition of iodide, the Rh epigrowth can even be achieved on gold substrates despite the rather large lattice mismatch of ~7%. Hollow Rh nanostructures have also been generated by selective etching of the core substrates. The new role of iodide in the overgrowth and the high level of control for Rh could hold the key to future nanoscale control of this important metal's architecture for use in heterogeneous catalysis.

A general synthetic strategy for yolk-shell nanocrystal@ZIF-8 nanostructures has been developed. The yolk-shell nanostructures possess the functions of nanoparticle cores, microporous shells, and a cavity in between, which offer great potential in heterogeneous catalysis. The synthetic strategy involved first coating the nanocrystal cores with a layer of Cu(2)O as the sacrificial template and then a layer of polycrystalline ZIF-8. The clean Cu(2)O surface assists in the formation of the ZIF-8 coating layer and is etched off spontaneously and simultaneously during this process. The yolk-shell nanostructures were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and nitrogen adsorption. To study the catalytic behavior, hydrogenations of ethylene, cyclohexene, and cyclooctene as model reactions were carried out over the Pd@ZIF-8 catalysts. The microporous ZIF-8 shell provides excellent molecular-size selectivity. The results show high activity for the ethylene and cyclohexene hydrogenations but not in the cyclooctene hydrogenation. Different activation energies for cyclohexene hydrogenation were obtained for nanostructures with and without the cavity in between the core and the shell. This demonstrates the importance of controlling the cavity because of its influence on the catalysis.

We report a simple approach for the fabrication of cuprous oxide (Cu 2O) nanocages and nanoframes possessing an unusual truncated rhombic dodecahedral structure. An aqueous solution containing CuCl 2, sodium dodecyl sulfate (SDS) surfactant, NH 2OH.HCl reductant, HCl, and NaOH was prepared, with the reagents introduced in the order listed. Rapid seed-particle aggregation and surface reconstruction of the intermediate structure resulted in the growth of type-I nanoframes, which have only {110} skeleton faces and empty {100} faces, 45 min after mixing the reagents. Continued crystal growth for additional 75 min produced nanocages with filled {100} faces. The nanocages have diameters of 350-400 nm, and their walls are thicker than those of the nanoframes. Selective acidic etching over the {110} faces of the nanocages by HCl via the addition of ethanol followed by sonication of the solution led to the formation of type-II nanoframes, which have elliptical pores on the {110} faces. The morphologies of these nanoframes were carefully examined by electron microscopy. Without addition of ethanol, random etching of the nanocages can occur at a slow rate. Octahedral gold nanocrystals and high-aspect-ratio gold nanorods were successfully encapsulated in the interiors of these Cu 2O nanocages by adding the gold nanostructures into the reaction solution. The formation process for such core-cage composite structures was studied. These composite materials should display interesting properties and functions.