Search

The onset potential of an electrocatalytic reaction is frequently used as an indicator to compare the catalytic performance of electrocatalysts. However, in addition to the fact that the onset potential is an undefined physico-chemical value which is dependent on the sensitivity of the used potentiostat its determination using voltammetry at the catalyst-modified electrode surface may be superimposed by additional Faradaic reactions e.g. from redox conversions of the catalyst material or corrosion processes. Gas-evolving electrodes suffer additionally from the dynamics of gas bubble formation and departure leading to inherent limitations of voltammetric studies directly performed at the catalyst-modified electrode. Nanometer-sized electrodes accurately positioned by means of shearforce-based constant-distance mode SECM are proposed for the highly sensitive determination of the onset potential of microcavity electrodes filled with different perovskites as oxygen evolution catalysts. Double barrel microcavity electrodes are additionally suggested for the simultaneous investigation of two catalysts. They enable direct referencing of a catalyst with a benchmark catalyst material in a single experiment.

Different modification procedures to stabilize and control the orientation of Myrothecium verrucaria bilirubin oxidase (MvBOD) on 3D carbon nanotube/carbon microfiber-modified graphite electrode surfaces were evaluated for the development of biofuel-cell cathodes. The surface properties of different linkers for covalent binding of BOD were investigated by using atomic force microscopy-based techniques. For all immobilization strategies, the maximal current response was obtained at a pH value of 6.5 with temperatures between 20 and 35 °C. The biocathode based on MvBOD immobilized through an imino bond to the electrode showed the highest current density (1600 μA cm−2) and was resistant to the presence of chloride ions. A biofuel cell was constructed, and it exhibited a maximal power of 54 μW cm−2 at 350 mV with an open-circuit voltage of about 600 mV by using a cellobiose dehydrogenase based bioanode and glucose as the fuel.

Determination of the so-called onset potentials, i.e. the lowest (for the anodic reactions) or the highest (for the cathodic reactions) potentials at which a reaction product is formed at a given electrode and at defined conditions, is very important for the evaluation of the catalytic activity and even more for the comparison of different catalysts. We present an approach for the determination of the onset potentials based on scanning electrochemical microscopy (SECM) using the “substrate generation–tip collection” mode. In the proposed method, the potential applied to the catalyst sample is changed stepwise. A micro-electrode serving as SECM tip is positioned in known close proximity to the catalyst surface and is used to detect the onset of the formation of the product of the catalytic reaction, specifically gas generation at the sample surface. The oxygen evolution reaction (OER) at model RuO2 and perovskite catalyst surfaces is used to evaluate the approach. The suggested method is supposed to provide a clearer and sensitive means for the detection of the onset potentials of electrolytic gas evolution reactions as compared to conventional procedures which mainly use cyclic voltammetry on stationary or rotating (ring) disk electrodes. Moreover, the detection of the reaction product at the SECM tip allows distinguishing between parasitic reactions at the catalyst surface and the true formation of the anticipated reaction product. Keywords: Electrocatalysis, Electrochemical microscopy, Gas evolution, Microelectrodes, Oxygen evolution

High-quality graphene oxide (GO) with high crystallinity and electrical conductivity as well as in situ doped with nitrogen and sulfur is obtained via the electrochemical exfoliation of graphite. Furthermore, iron incorporated GO sheets show promising catalytic activity and stable methanol tolerance durability when used as electrocatalysts for the oxygen reduction reaction.

NAD + -dependent enzymes require the presence of catalysts for cofactor regeneration in order to be employed in enzymatic biofuel cells. Poly-(methylene green) catalysts have proven to help the oxidation reaction of NADH allowing for the use of such enzymes in electrocatalytic oxidation reactions. In this paper we present the development of 3D anode based on NAD + -dependent malate dehydrogenase. The 3D material chosen was reticulated vitreous carbon (RVC) which was modified with poly-(MG) for NADH oxidation and it also accommodated the porous immobilization matrix for MDH consisting of MWCNTs embedded in chitosan; allowing for mass transport of the substrate to the electrode. Scanning electron microscopy was used in order to characterize the poly-(MG)-modified RVC, and electrochemical evaluation of the anode was performed.

Glucose oxidase catalyzes the formation of metallic gold particles in immediate proximity of the protein from gold (III) chloride in the absence of any other catalytic or reductive substrates. The protein-mediated gold reduction reaction leads to size-controllable gold particle formation and concomitant association of the enzyme in an electrically conductive metallic template. Such an enzyme immobilization strategy provides a simple and rapid method to create an intimate interface between glucose oxidase and a conductive matrix, which can be joined to an electrode surface. Model electrodes were prepared by entraining the glucose oxidase/gold particles onto carbon paper. Voltammetry of the resulting electrodes revealed stable oxidation and reduction peaks at a potential close to that of the standard value for the FAD/ FADH2 cofactor of immobilized glucose oxidase. The gold electrodes exhibit catalytic activity in the presence of glucose confirming the entrapment of active glucose oxidase within the gold architecture. The resulting composite material can be successfully integrated with electrodes of various designs for biosensor and biofuel cell applications.

This work demonstrates a new approach for building bio-inorganic interfaces by integrating biomimetically-derived silica with single-walled carbon nanotubes to create a conductive matrix for immobilization of enzymes. Such a strategy not only allows simple integration into bio-devices but presents an opportunity to intimately interface an enzyme and manifest direct electron transfer features. Biologically-templated silica/carbon nanotube/enzyme composites were evaluated electrochemically and characterized by means of X-ray photoelectron spectroscopy. Voltammetry of the composites displayed stable oxidation and reduction peaks at an optimal potential close to that of the FAC/FADS(sub 2) cofactor of immobilized glucose oxidase. The immobilization stabilized enzyme activity for a period of one month and retained catalytic activity towards the oxidation of glucose. It was demonstrated that the resulting composite can be successfully integrated into functional bio-electrodes for biosensor and biofuel cell applications.

The incorporation of Fe-Nx/C moieties into perovskites remarkably activates them for the oxygen reduction reaction (ORR) and also leads to notable improvement of their activity towards the oxygen evolution reaction (OER) thus presenting a new route for realizing high performance, low cost bifunctional catalysts for reversible oxygen electrodes.

Cavity microelectrodes were used as a binder-free platform to evaluate oxygen evolution reaction (OER) electrocatalysts with respect to gas bubble formation and departure. Electrochemical noise measurements were performed by using RuO2 as a benchmark catalyst and the perovskite La0.58 Sr0.4 Fe0.8 Co0.2 O3 as a non-noble metal OER catalyst with lower intrinsic conductivity. Changes in the current during the OER originate from variations in electrolyte resistance during the formation of the gas phase and partial coverage of the active area. Fluctuations observed in current and conductance transients were used to establish the contribution from the ohmic overpotential and to determine the characteristic frequency of oxygen evolution. The proposed quantitative determination of gas bubble growth and departure opens up the route for a rational interface design by considering gas bubble growth and departure as a main contributing factor to the overall electrocatalytic activity at high current densities.

The oxygen evolution reaction (OER) is an enabling process for technologies in the area of energy conversion and storage, but its slow kinetics limits its efficiency. We performed an electrochemical evaluation of 14 different perovskites of variable composition and stoichiometry as OER electrocatalysts in alkaline media. We particularly focused on improved methods for a reliable comparison of catalyst activity. From initial electrochemical results we selected the most active samples for further optimization of electrode preparation and testing. An inverted cell configuration facilitated gas bubble detachment and thus minimized blockage of the active surface area. We describe parameters, such as the presence of specific cations, stoichiometry, and conductivity, that are important for obtaining electroactive perovskites for OER. Conductive additives enhanced the current and decreased the apparent overpotential of OER for one of the most active samples (La(0.58)Sr(0.4)Fe(0.8)Co(0.2)O(3)).