Search

The introduction of WO 3 species on to FeTiO x catalysts led to the formation of Fe(3+n)+-O-W(6−n)+ and Ti(4+n)+-O-W(6−n)+ structures, increasing the ratio of chemical adsorbed oxygen, surface W-OH species, which were beneficial to the NH 3 -SCR reaction. [Display omitted] • The catalytic activity of FeTiO x was improved after the loading of WO 3 species. • The amount and strength of Brønsted acid sites was enhanced. • Fe(3+n)+-O-W(6−n)+ raised the count of chemical adsorbed oxygen, surface W-OH species. A series of WO 3 modified iron-titanate mixed metal oxides catalysts (the molar ratio of Fe/Ti = 4:1) were synthesized by conventional impregnation method and tested for selective catalytic reduction of NO x by NH 3. The addition of WO 3 species could enhance the catalytic performance of FeTiO x and 6 W/FeTiO x showed optimal activity with above 80 % NO conversion under a wide operating temperature window of 200–400 °C. It also exhibited excellent stability in the presence of H 2 O and SO 2 at 250 °C, even as low as 225 °C, which provided a suitable deNO x candidate for stationary sources. The characterization methods including XRD, BET, XPS, H 2 -TPR, NH 3 -TPD, NO-TPD and in situ DRIFTs were used to investigate the structure and surface properties of catalysts and their influence on the catalytic activity. The results demonstrated that the impregnation of WO 3 species led to the strong electronic inductive effects between Fe3+and W6+, Ti4+ and W6+ in the forms of Fe(3+n)+-O-W(6−n)+ and Ti(4+n)+-O-W(6−n)+ structures, increasing the ratio of chemical adsorbed oxygen species, surface OH-, which were stimulative to low-temperature NH 3 -SCR reaction. The increased amount of surface Brønsted acid sites mainly came from W-OH species. Besides, the reaction pathway over 6 W/FeTiO x mainly followed Eley-Rideal mechanism at 225 °C through the reaction between gaseous NO and adsorbed NH 3 species. [ABSTRACT FROM AUTHOR]