Search

A Ni 1 Co 1 O x catalyst with lattice distortions was prepared by a modified hard template method. Elemental analysis shows that Ni tends predominantly to disperse on the surfaces of the nanoparticles. Under the optimum reaction conditions (80 °C, 20 h, and 1.5 g NaOH), Ni 1 Co 1 O x catalyst could exhibit optimum catalytic performance (78.5% conversion, 66.5% GLYA selectivity, and recycling for four times). • A lattice-distorted Ni 1 Co 1 O x catalyst was synthesized by a modified hard template method. • High selectivity toward glyceric acid was obtained on the Ni 1 Co 1 O x catalyst. • Electron transfer from Ni cations to Co cations results in the generation of surface oxygen vacancies. • The oxygen vacancies of Co and Ni species promote the oxidation of glycerol to glyceric acid. Developing cheap and highly efficient catalysts for the selective oxidation of glycerol to value-added carboxylic acids still remains a challenge. Here, non-noble-metal Ni–Co oxide catalysts with lattice distortions are reported for the first time as highly efficient and stable catalysts for the oxidation of glycerol to glyceric acid. The Ni 1 Co 1 O x catalyst, prepared by a modified hard template method, exhibits superior activity (1.5 × 10−3 s−1), excellent glyceric acid selectivity (66.5%), and good stability under mild conditions (80 °C, 1 MPa O 2). Multiple characterizations demonstrated that the nanosized Ni 1 Co 1 O x catalyst (2.3 nm) contains lattice distortion Ni–Co structures with nickel-rich surfaces. This morphology induces electron transfer from Co cations (mainly Co3+) to Ni cations (mainly Ni3+), resulting in the generation of surface oxygen vacancies. Density functional theory calculations and catalytic kinetics demonstrated that oxygen vacancies on Co species could improve glyceric acid selectivity by preventing the cleavage of C C bond, and oxygen vacancies on the Ni species could promote the activation of C H bonds, which results in the exceptional catalytic performance of Ni 1 Co 1 O x. The novel Ni–Co oxide catalyst with lattice distortions synthesized here may provide some guidance for the rational design of inexpensive and highly efficient catalysts for the catalytic oxidation of biopolyols. [ABSTRACT FROM AUTHOR]

Graphical abstract In-situ coating of SBA-15 with MgO was synthesized in one-step procedure to form the mesoporous solid bases. Then, the Pt nanoparticles were loaded by NaBH 4 reduction method. Subsequently, the Pt/MgO-SBA-15 catalyst was applied to the selective oxidation of glycerol to obtain C 3 products. Highlights • Novel hybrid Pt/MgO/SBA-15 catalysts were prepared. • The Pt nanoparticles was restricted in the channel of MgO/SBA-15. • The synergistic effect between Pt and MgO enhanced glycerol oxidation activity. • Oxygen active sites of MgO promoted the dehydrogenation reaction. Abstract Enhanced metal-support interaction is the key for selective oxidation of glycerol to value-added carboxylic acids. However, the rational control of interfacial properties still remains a significant challenge. In this work, we prepared hybrid Pt/MgO/SBA-15 catalysts for the facile oxidation of glycerol to glyceric acid in the absence of liquid alkalis. It was found that the confinement effect of SBA-15 leads to restricted Pt nanoparticles in the MgO/SBA-15 channel with a unique "strip" shape. Such a morphology and the strong electron coupling effect between Pt and MgO species synergistically enhanced glycerol oxidation over Pt-MgO sites. A volcanic-shaped relationship between Mg/Si ratio and catalytic performance was established experimentally, and the Pt/MgO/SBA-15 (0.1) catalyst showed excellent combined selectivity for C 3 products (glyceric acid, glyceraldehyde and dihydroxyacetone) with a remarkable turn over frequency (TOF) of 1671.2 h−1 higher than the reported catalysts under base-free conditions. Furthermore, density functional theory (DFT) calculations confirmed that the oxidation reaction could be promoted by oxygen defects of MgO sites, resulting in a reduction of the energy barriers for C H and O H activation. These insights may provide a new way to the supported solid base catalyst design and mechanistic study. [ABSTRACT FROM AUTHOR]

[Display omitted] • A method to control the surface Mo:C ratio by carbonization flow is discovered for the first time. • The relationship between the surface Mo:C ratio and the reactivity is established. • The low temperature water gas shift reaction activity depends on the electron transfer capability of the surface. • The catalysts with low Mo:C ratio improve catalyst stability. The low-temperature water–gas shift (WGS) reaction is an important industrial process for producing hydrogen and reducing carbon dioxide emissions. The α-MoC 1-x catalysts have shown promising performance in WGS reactions, but their activities are highly dependent on the surface structure. In this study, we investigated the effect of surface Mo and C ordinations on the low-temperature WGS activity of Pt/α-MoC 1-x catalysts using both experimental and theoretical methods. Our results reflected that as Mo: C ratio decreases, the surface free carbon and reduced number of Mo active sites led to a weakened electron transfer ability, resulting in poor catalytic activity. The 0.4% Pt/α-MoC 1-x -50 catalyst displayed superior hydrogen production activity and low apparent activation energy (E app = 58.5 kJ/mol) at low temperatures (100–200 °C). Our density functional theory (DFT) calculations revealed that the high reactivity of the 0.4% Pt/α-MoC 1-x -50 catalyst was due to the strong electron transfer capability and increased number of surface Mo active sites. This study provides new insights into the structure–activity relationship and stability of α-MoC 1-x catalysts for the WGS reaction and lays the foundation for the design of WGS catalysts with high activity and stability at low temperature. [ABSTRACT FROM AUTHOR]