Search

The influence of the reaction medium on the surface structure and properties of a Ni-based catalyst used for the reductive transformations of O-, N-, and S-containing aromatic substrates under hydrogen transfer conditions has been studied. The catalysts were characterized by XRD, XPS, and IR spectroscopy and TEM methods before and after the reductive reaction. It has been shown that the conversion of 1-benzothiophene causes irreversible poisoning of the catalyst surface with the formation of the Ni2S3 phase, whereas the conversion of naphthalene, 1-benzofuran, and indole does not cause any phase change of the catalyst at 250 °C. However, after the indole conversion, the catalyst surface remains enriched with N-containing compounds, which are evenly distributed over the surface. [ABSTRACT FROM AUTHOR]

Transfer hydrogenation (TH) is considered as one of the most promising ways to convert biomass into valuable products. This study aims to demonstrate the performance of high-loaded Ni-based catalysts in the TH of phenolic compounds such as guaiacol and dimethoxybenzenes. The experiments were carried out under supercritical conditions at 250 °C using 2-PrOH as the only hydrogen donor. Ni-SiO2 and NiCu-SiO2 were synthesized using the eco-friendly original method based on supercritical antisolvent coprecipitation. It has been found that guaiacol is rapidly converted into 2-methoxycyclohexanol and cyclohexanol, while the presence of Cu impedes the formation of the latter product. Transformations of dimethoxybenzene position isomers are slower and result in different products. Thus, 1,3-dimethoxybenzene loses oxygen atoms transform into methoxycyclohexane and cyclohexanol, whereas the saturation of the aromatic ring is more typical for other isomers. The Cu addition increases specific catalytic activity in the TH of 1,2-and 1,3-dimethoxybenzene compared to the Cu-free catalyst. [ABSTRACT FROM AUTHOR]

Binary Ni–Cu heterogeneous catalysts are known to demonstrate excellent activity in conventional hydrogenation of phenolic compounds, and Cu addition facilitates hydrodeoxygenation (HDO). In this study, we aimed to show the effect of Cu on the specific catalytic activity and selectivity of Ni–Cu catalysts in transfer hydrogenation, in which 2-PrOH was used as a solvent and an H donor. Catalytic transformations of anisole were studied in sub- and supercritical alcohol at 150 and 250 °C. The catalysts were prepared using an environmentally friendly supercritical antisolvent coprecipitation method, which makes it possible to obtain well-dispersed particles (less than 7 nm) at high metal loading (up to 50 wt.%). When copper is added, deactivation of the catalyst in transformations of anisole, including HDO, is observed. The experimental data and the appropriate kinetic analysis demonstrate that there is a decrease in the rate of anisole conversion accompanied by an increase in the concentration of acetone formed during the dehydrogenation of 2-PrOH. [ABSTRACT FROM AUTHOR]

The effect of amines, imines and heterocycle compounds on conversion has been studied in transfer hydrogenation of camphor and 2-PrOH catalyzed by Raney® nickel. Small amount (5 mol% to nickel) of N-containing compound significantly decreases catalyst activity. It has been shown that the poisoning effect mostly depends on molecular size of amines and heterocyclic compounds. For aniline and cyclohexylamine the dependence of camphor conversion on poison/nickel ratio was obtained. Additionally, benzaldehyde, cinnamaldehyde demonstrated higher reactivity compared corresponding imines under transfer hydrogenation conditions. Obtained data explain low activity of nickel-based catalysts when N-containing compounds are presented in reaction mixture. [Display omitted] • Poisoning effect of N-containing compounds on Raney® Ni activity in TH was shown. • For amines and heterocycles poisoning effect correlates with molecular size. • Using cyclohexylamine as titrant TOF of Raney® Ni in TH was calculated as 1.0 h−1. • Low reactivity of imines compared to carbonyl compounds in TH was demonstrated. [ABSTRACT FROM AUTHOR]

Abstract: Small bimetallic Pd–Fe particles supported on a well ordered alumina film grown on NiAl (110) were studied focusing on the geometric, electronic, adsorption, as well as magnetic properties. The morphology, growth mode and surface composition were investigated by combining scanning tunneling microscopy (STM), temperature-programmed desorption (TPD) and infrared spectroscopy (IRAS) using CO as a probe molecule. Information on the electronic properties of the bimetallic systems was obtained by means of X-ray photoelectron spectroscopy (XPS). These measurements were amended by in situ ferromagnetic resonance spectroscopy to address the magnetic properties of the bimetallic particles. The subsequent deposition of the metals at 300K varying the order of metal deposition resulted in two distinct bimetallic systems. Pd deposited on existing Fe particles forms a shell, however, FMR and XPS suggest that intermixing of Pd and Fe occurs to some extent. For the reverse order, a larger amount of Fe is required to coat Pd particles, due to the strong tendency of Pd to segregate to the surface of the particles. [Copyright &y& Elsevier]

Transfer hydrogenation of anisole in 2-PrOH has been studied as a model reaction for lignocellulose processing. The reaction was studied over high-loaded Ni-based catalysts synthesized via supercritical antisolvent precipitation of a Ni precursor and sols of four oxides: Al 2 O 3 , SiO 2 , TiO 2 , and ZrO 2. It was demonstrated that the oxide support significantly affects the structure of the catalysts, their activity, and selectivity. The best performance in the transfer hydrodeoxygenation of anisole was shown by Ni supported on alumina at 250 °C, which was explained by the highest dispersion of Ni0 particles in this catalyst and by the highest concentration of acid centers. [Display omitted] • Well-dispersed high-loaded Ni catalysts were synthesized by SAS method. • Obtained catalysts show excellent activity in transfer hydrogenation of anisole. • Acid sites and the smaller Ni particles facilitate hydrodeoxygenation of anisole. [ABSTRACT FROM AUTHOR]