Search

• Mass transfer across a gas–liquid interface of acoustic cavitation is investigated. • Time-averaged Sherwood number is decreased with sound pressure amplitude. • Time-averaged Sherwood number can be negative value due to area and shell effect. • The instantaneous Sherwood number is varied in the range of O (101) ∼ O (102). In the present study, mass transfer across a gas–liquid interface of acoustic cavitation bubble is numerically investigated. The volume of fluid (VOF) method coupled with a continuous species transfer model is used to simulate the bubble dynamic behavior and mass transfer across the gas–liquid interface. Chemical species are transferred repeatedly between the liquid and gas phases in accordance with the bubble oscillation, and the chemical species are transferred into the bubble during an expansion phase, and to the outside of bubble during a compression phase. Time-averaged Sherwood number is decreased with an amplitude of sound pressure due to area effect and shell effect , and its value becomes negative at high pressure amplitude. Meanwhile, the instantaneous Sherwood number is largely varied in accordance with the bubble oscillation, and its magnitude becomes O (101) ∼ O (102). [ABSTRACT FROM AUTHOR]

• Combination of acoustic cavitation and plasma results in an enhancement of degradation efficiency. • Acoustic cavitation assisted plasma can be created in wide ranges of pH and electrical conductivity. • Higher flow rates of circulating solutions cause a further enhancement in the degradation efficiency. • The process proposed has the potential to extend the application area of underwater plasma. The present study investigates the wastewater treatment performance of an acoustic cavitation assisted plasma (ACAP) process in a circulating reactor using Rhodamine B (RhB) as a model water pollution. The concept of this process was proposed by the authors recently for a batch type rector. The measurements revealed that combining the ultrasound irradiation with pulsed discharge plasma allows the RhB degradation efficiency to be drastically increased as compared with the plasma-alone case. This effect is especially significant at higher values of solution electrical conductivity examined in a range of 20 ~ 400 μS/cm. Acidic conditions and larger flow rates of solution were found to be favorable for the degradation efficiency. The effect of flow rate was also analyzed through numerical simulation. The results indicated that the mass transfer of RhB to the plasma-cavitation zone is one of the controlling parameters influencing the degradation performance. Behavior of bubbles and pulse discharge frequency were examined using a high-speed video camera. Relatively large bubbles were found to favor the plasma pulse generation and propagation when move near the high-voltage electrode. On the whole, the results of this study suggest that the ACAP process has the potential to synergistically extend the application area of underwater plasma in both research and industry. [ABSTRACT FROM AUTHOR]