Search

The influence of the user's hand holding a mobile phone to the ear on the peak spatial-average Specific Absorption Rate (psSAR) averaged over any 1 g and 10 g of tissue in the head is investigated. This study is motivated by recent reports that found substantial increases in psSAR by the presence of the hand in some cases. Current measurement standards prescribe the measurement of SAR in a head phantom without a hand present. The mechanisms of interaction between the hand and mobile phone models are studied. Simulations and measurements at 900 and 1800 MHz have been conducted to complement the understanding of the hand grip parameters leading to higher SAR in the head. Numerical simulations were conducted on four mobile phone models, and parameters such as the palm-phone distance and hand position were varied. Measurements of 46 commercial mobile phones were made, and the maximum psSAR with different hand positions and palm-phone distances was recorded. Both simulations and measurements have found increases in the psSAR in the head of at least 2.5 dB due to the presence of the hand. Furthermore, the psSAR is sensitive to the hand grip, i.e., the variations can exceed 3 dB. [ABSTRACT FROM PUBLISHER]

With the continuous trend to smaller mobile devices with more functionality and more wireless bands, the possible insufficient over-the-air (OTA) performance becomes a growing concern for service providers. In addition to reduced radiation efficiency by smaller antennas in smaller phones, the head and in particular the hand may further impair radiation performance. The aim of this paper is to investigate the influence of the various parameters of the hand upon the OTA performance criteria to support the standardization process of the hand phantom and to provide the tools for optimization of handheld transmitters. The results reveal the following order of significance for small variations in hand parameters: 1) position of index finger; 2) distance between phone case and palm; 3) position of the other fingers; 4) size of the hand; 5) dielectric parameters; 6) wrist length and tilt. Some configurations may lead to a slight increase of the peak spatial SAR in the head. OTA assessment without the hand does not provide a good measure of phone performance in real life. However, good reproducibility of evaluations requires a precise definition of the hand, in particular its geometry and the phone position within the hand. [ABSTRACT FROM AUTHOR]

A commercial clam shell phone CAD model is used to numerically investigate the effect of a hand phantom on mobile phone antenna radiation performance. The simulation results show that the grip of the hand phantom is the most important parameter to antenna performance. The antenna is converted into a parameterized form, then optimized to achieve the targeted multi-band performance in real-usage conditions. [ABSTRACT FROM AUTHOR]

A new conformal finite-difference time-domain (CFDTD) updating scheme for metallic surfaces nonaligned in the grid is presented in this paper. In contrast to existing conformal models, the new model can be formulated with the original Yee FDTD update equation. Therefore, the proposed scheme can be easily added in standard FDTD codes even if the codes are already parallelized or hardware-accelerated. In addition, based on the commonly used conventional stability criterion, a derivation of the stability is presented and based on the conformal geometric information, a time step reduction formula is presented. The time step reduction is used as a user-defined parameter to tradeoff speed versus accuracy. The achievable geometric precision is optimized to a given time step. Therefore, even with the conventional time step (no reduction) the presented scheme profits from the conformal discretization. To show the performance and the robustness of the proposed scheme canonical validations and two real world applications were investigated. A broadband low profile (circular) antenna was successfully simulated showing the benefit of the conformall FDTD method compared to the conventional scheme. Furthermore, a CAD based mobile phone was conformally discretized and successfully simulated showing that the proposed scheme is highly suited for the simulation of advanced engineering problems. [ABSTRACT FROM AUTHOR]