Search

The objective of this study was to verify the effect of the hemicellulose content of commercial bleached pulps on the ease of mechanical fibrillation and on its energy consumption (EC). NaOH in concentrations of 5% with 2 h of reaction, and 10% with 1 and 2 h of reaction, was evaluated for the partial removal of hemicelluloses. Pulp fibrillation was influenced by hemicellulose removal, being less fibrillated when excessive removal occurred (in the range of 4–8.5%). Hemicellulose content in the range of 9–13% increased the water retention value (WRV) and led to nanofibrils with smaller diameter, while a stronger alkali concentration reduced the WRV. X-ray diffraction (XRD) showed that reaction time was a determining factor for the crystallinity of the samples and partial conversion of cellulose I to cellulose II in pretreatments with NaOH 10% (1 and 2 h), and was a factor that may also damage the fibrillation process. Pre-treatment with NaOH 5% for 2 h promoted energy savings for both pulps. This work demonstrated that hemicellulose content has a considerable influence on the mechanical fibrillation and is a key aspect of the balance between efficient fibrillation and the energy required for that. [ABSTRACT FROM AUTHOR]

Lignin-cellulose nanofibrils (LCNF) are of attracting an increasing interest due to the benefits of maintaining the lignin in the nanomaterial composition. The production of LCNF requires considerable energy consumption, which has been suppressed employing pretreatment of biomass, in which it highlights those that employ enzymes that have the advantage of being more environmentally friendly. Some negative aspects of the presence of lignin in the fiber to obtain cellulose nanofibrils is that it can hinder the delamination of the cell wall and act as a physical barrier to the action of cellulase enzymes. This study aimed to evaluate the impact of a combined enzymatic pretreatment of laccase and endoglucanase for high content lignin LCNF production. The morphological and chemical properties, visual aspect and stability, crystallinity, mechanical properties, rheology, barrier properties and quality index were used to characterize the LCNF. The laccase loading used was efficient in modifying the lignin to facilitate the action of the endoglucanase on cellulose without causing the removal of this macromolecule. This pretreatment improved the quality of LCNF (61 ± 3 to 71 ± 2 points) with an energy saving of 42% and, therefore, this pretreatment could be suitable for industrial production for a variety of applications. [Display omitted] [ABSTRACT FROM AUTHOR]