Search

Glycoengineering ultimately allows control over glycosylation patterns to generate new glycoprotein variants with desired properties. A common challenge is glycan heterogeneity, which may affect protein function and limit the use of key techniques such as mass spectrometry. Moreover, heterologous protein expression can introduce nonnative glycan chains that may not fulfill the requirement for therapeutic proteins. One strategy to address these challenges is partial trimming or complete removal of glycan chains, which can be obtained through selective application of exoglycosidases. Here, we demonstrate an enzymatic O -deglycosylation toolbox of a GH92 α-1,2-mannosidase from Neobacillus novalis , a GH2 β-galactofuranosidase from Amesia atrobrunnea and the jack bean α-mannosidase. The extent of enzymatic O -deglycosylation was mapped against a full glycosyl linkage analysis of the O -glycosylated linker of cellobiohydrolase I from Trichoderma reesei (Tr Cel7A). Furthermore, the influence of deglycosylation on Tr Cel7A functionality was evaluated by kinetic characterization of native and O -deglycosylated forms of Tr Cel7A. This study expands structural knowledge on fungal O -glycosylation and presents a ready-to-use enzymatic approach for controlled O -glycan engineering in glycoproteins expressed in filamentous fungi. [ABSTRACT FROM AUTHOR]

Understanding the pH effect of cellulolytic enzymes is of great technological importance. In this study, we have examined the influence of pH on activity and stability for central cellulases (Cel7A, Cel7B, Cel6A from Trichoderma reesei, and Cel7A from Rasamsonia emersonii). We systematically changed pH from 2 to 7, temperature from 20°C to 70°C, and used both soluble (4‐nitrophenyl β‐ d‐lactopyranoside [pNPL]) and insoluble (Avicel) substrates at different concentrations. Collective interpretation of these data provided new insights. An unusual tolerance to acidic conditions was observed for both investigated Cel7As, but only on real insoluble cellulose. In contrast, pH profiles on pNPL were bell‐shaped with a strong loss of activity both above and below the optimal pH for all four enzymes. On a practical level, these observations call for the caution of the common practice of using soluble substrates for the general characterization of pH effects on cellulase activity. Kinetic modeling of the experimental data suggested that the nucleophile of Cel7A experiences a strong downward shift in pKa upon complexation with an insoluble substrate. This shift was less pronounced for Cel7B, Cel6A, and for Cel7A acting on the soluble substrate, and we hypothesize that these differences are related to the accessibility of water to the binding region of the Michaelis complex. [ABSTRACT FROM AUTHOR]

Background: The ascomycete fungus Trichoderma reesei is the predominant source of enzymes for industrial conversion of lignocellulose. Its glycoside hydrolase family 7 cellobiohydrolase (GH7 CBH) TreCel7A constitutes nearly half of the enzyme cocktail by weight and is the major workhorse in the cellulose hydrolysis process. The orthologs from Trichoderma atroviride (TatCel7A) and Trichoderma harzianum (ThaCel7A) show high sequence identity with TreCel7A, ~ 80%, and represent naturally evolved combinations of cellulose-binding tunnel-enclosing loop motifs, which have been suggested to influence intrinsic cellobiohydrolase properties, such as endo-initiation, processivity, and off-rate. Results: The TatCel7A, ThaCel7A, and TreCel7A enzymes were characterized for comparison of function. The catalytic domain of TatCel7A was crystallized, and two structures were determined: without ligand and with thio-cellotriose in the active site. Initial hydrolysis of bacterial cellulose was faster with TatCel7A than either ThaCel7A or TreCel7A. In synergistic saccharification of pretreated corn stover, both TatCel7A and ThaCel7A were more efficient than TreCel7A, although TatCel7A was more sensitive to thermal inactivation. Structural analyses and molecular dynamics (MD) simulations were performed to elucidate important structure/function correlations. Moreover, reverse conservation analysis (RCA) of sequence diversity revealed divergent regions of interest located outside the cellulose-binding tunnel of Trichoderma spp. GH7 CBHs. Conclusions: We hypothesize that the combination of loop motifs is the main determinant for the observed differences in Cel7A activity on cellulosic substrates. Fine-tuning of the loop flexibility appears to be an important evolutionary target in Trichoderma spp., a conclusion supported by the RCA data. Our results indicate that, for industrial use, it would be beneficial to combine loop motifs from TatCel7A with the thermostability features of TreCel7A. Furthermore, one region implicated in thermal unfolding is suggested as a primary target for protein engineering. [ABSTRACT FROM AUTHOR]

ABSTRACT Synergy between cellulolytic enzymes is essential in both natural and industrial breakdown of biomass. In addition to synergy between endo- and exo-lytic enzymes, a lesser known but equally conspicuous synergy occurs among exo-acting, processive cellobiohydrolases (CBHs) such as Cel7A and Cel6A from Hypocrea jecorina. We studied this system using microcrystalline cellulose as substrate and found a degree of synergy between 1.3 and 2.2 depending on the experimental conditions. Synergy between enzyme variants without the carbohydrate binding module (CBM) and its linker was strongly reduced compared to the wild types. One plausible interpretation of this is that exo-exo synergy depends on the targeting role of the CBM. Many earlier works have proposed that exo-exo synergy was caused by an auxiliary endo-lytic activity of Cel6A. However, biochemical data from different assays suggested that the endo-lytic activity of both Cel6A and Cel7A were 103-104 times lower than the common endoglucanase, Cel7B, from the same organism. Moreover, the endo-lytic activity of Cel7A was 2-3-fold higher than for Cel6A, and we suggest that endo-like activity of Cel6A cannot be the main cause for the observed synergy. Rather, we suggest the exo-exo synergy found here depends on different specificities of the enzymes possibly governed by their CBMs. Biotechnol. Bioeng. 2017;114: 1639-1647. © 2017 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

Various cellulases consist of a catalytic domain connected to a carbohydrate-binding module (CBM) by a flexible linker peptide. The linker if often strongly O-glycosylated and typically has a length of 20-50 amino acid residues. Functional roles, other than connecting the two folded domains, of the linker and its glycans, have been widely discussed, but experimental evidence remains sparse. One of the most studied cellulose degrading enzymes is the multi-domain cellobiohydrolase Cel7A from Hypocrea jecorina. Here, we designed variants of Cel7A with mutations in the linker region to elucidate the role of the linker. We found that moderate modification of the linker could result in significant changes in substrate affinity and catalytic efficacy. These changes were quite different for different linker variants. Thus, deletion of six residues near the catalytic domain had essentially no effects on enzyme function. Conversely, a substitution of four glycosylation sites near the middle of the linker reduced substrate affinity and increased maximal turnover. The observation of weaker binding provides some support of recent suggestions that linker glycans may be directly involved in substrate interactions. However, a variant with several inserted glycosylation sites near the CBM also showed lower affinity for the substrate compared to the wild-type and we suggest that substrate interactions of the glycans depend on their exact location as well as other factors such as changes in structure and dynamics of the linker peptide. [ABSTRACT FROM AUTHOR]

ABSTRACT Synergy between cellulolytic enzymes is important for their industrial utilization, and numerous studies have addressed the problem of how to optimize the composition of enzyme cocktails with respect to this. The degree of synergy (DS) may change with substrate conversion, and some studies have suggested a maximum in DS early in the process. Here, we systematically investigated interrelationships of DS and conversion in a model system covering a wide range of experimental conditions. The results did not reveal any correlation between DS and contact time, but when plotted against the degree of substrate conversion we saw a systematic increase in DS. We suggest that this is linked to a decreasing reactivity of the substrate. Hence, synergy became increasingly important as the recalcitrance of the remaining substrate grew. Such conversion dependent changes in DS appear to be important both in mechanistic studies and attempts to find industrial enzymes blends with optimal synergy. Biotechnol. Bioeng. 2017;114: 696-700. © 2016 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

ABSTRACT Cel7A cellobiohydrolases perform processive hydrolysis on one strand of cellulose, which is threaded through the enzyme's substrate binding tunnel. The tunnel structure results from a groove in the catalytic domain, which is covered by a number of loops. These loops have been identified as potential targets for engineering of this industrially important enzyme family, but only few systematic studies on this have been made. Here we show that two asparagine residues (N194 and N197) positioned in the loop covering the glucopyranose subsite −4 (recently denoted B2 loop) of the thermostable Cel7A from Rasamsonia emersonii had profound effects on both substrate interactions and catalytic efficacy. At room temperature the double mutant N194A/N197A showed strongly reduced substrate affinity with a water-cellulose partitioning coefficient threefold lower than the wild type. Yet, this variant was catalytically efficient with a maximal turnover about twice as high as the wild type. Analogous but smaller changes were found for the single mutants. Analysis of these changes in affinity and kinetics as a function of temperature, led to the conclusion that replacement of N194 and particularly N197 with alanine leads to faster enzyme-substrate dissociation. Conversely, these residues appeared to have little or no effect on the rate of association. We suggest that the controlled adjustment of the enzyme-substrate dissociation prompts faster cellulolytic enzymes. Biotechnol. Bioeng. 2017;114: 53-62. © 2016 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

ABSTRACT The cellobiohydrolase cellulase Cel7A is extensively utilized in industrial treatment of lignocellulosic biomass under conditions of high product concentrations, and better understanding of inhibition mechanisms appears central in attempts to improve the efficiency of this process. We have implemented an electrochemical biosensor assay for product inhibition studies of cellulases acting on their natural substrate, cellulose. Using this method we measured the hydrolytic rate of Cel7A as a function of both product (inhibitor) concentration and substrate load. This data enabled analyses along the lines of conventional enzyme kinetic theory. We found that the product cellobiose lowered the maximal rate without affecting the Michaelis constant, and this kinetic pattern could be rationalized by two fundamentally distinct molecular mechanisms. One was simple reversibility, that is, an increasing rate of the reverse reaction, lowering the net hydrolytic velocity as product concentrations increase. Strictly this is not a case of inhibition, as no catalytically inactive is formed. The other mechanism that matched the kinetic data was noncompetitive inhibition with an inhibition constant of 490 ± 40 μM. Noncompetitive inhibition implies that the inhibitor binds with comparable strength to either free enzyme or an enzymesubstrate complex, that is, that association between enzyme and substrate has no effect on the binding of the inhibitor. This mechanism is rarely observed, but we argue, that the special architecture of Cel7A with numerous subsites for binding of both substrate and product could give rise to a true noncompetitive inhibition mechanism. Biotechnol. Bioeng. 2016;113: 1178-1186. © 2015 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

Processive enzymes perform sequential steps of catalysis without dissociating from their polymeric substrate. This mechanism is considered essential for efficient enzymatic hydrolysis of insoluble cellulose (particularly crystalline cellulose), but a theoretical framework for processive kinetics remains to be fully developed. In this paper, we suggest a deterministic kinetic model that relies on a processive set of enzyme reactions and a quasi steady-state assumption. It is shown that this approach is practicable in the sense that it leads to mathematically simple expressions for the steady-state rate, and only requires data from standard assay techniques as experimental input. Specifically, it is shown that the processive reaction rate at steady state may be expressed by a hyperbolic function related to the conventional Michaelis- Menten equation. The main difference is a 'kinetic processivity coefficient', which represents the probability of the enzyme dissociating from the substrate strand before completing n sequential catalytic steps, where n is the mean processivity number measured experimentally. Typical processive cellulases have high substrate affinity, and therefore this probability is low. This has significant kinetic implications, for example the maximal specific rate ( Vmax/E0) for processive cellulases is much lower than the catalytic rate constant ( kcat). We discuss how relationships based on this theory may be used in both comparative and mechanistic analyses of cellulases. [ABSTRACT FROM AUTHOR]

Cellulose degrading fungi such as Hypocrea jecorina secrete several cellulases including the two cellobiohydrolases (CBHs) Cel6A and Cel7A. The two CBHs differ in catalytic mechanism, attack different ends, belong to different families, but are both processive multi-domain enzymes that are essential in the hydrolysis of cellulose. Here we present a direct kinetic comparison of these two enzymes acting on insoluble cellulose. We used both continuous- and end-point assays under either enzyme- or substrate excess, and found distinct kinetic differences between the two CBHs. Cel6A was catalytically superior with a maximal rate over four times higher than Cel7A. Conversely, the ability of Cel6A to attack diverse structures on the cellulose surface was inferior to Cel7A. This latter difference was pronounced as the density of attack sites for Cel7A was almost an order of magnitude higher compared to Cel6A. We conclude that Cel6A is a fast but selective enzyme and that Cel7A is slower, but promiscuous. One consequence of this is that Cel6A is more effective when substrate is plentiful, while Cel7A excels when substrate is limiting. These diverse kinetic properties of Cel6A and Cel7A might elucidate why both cellobiohydrolases are prominent in cellulolytic degrading fungi. [ABSTRACT FROM AUTHOR]

Even though many enzyme processes occur at the interface of an insoluble substrate, these reactions are generally much less studied than homogenous enzyme reactions in the aqueous bulk. Interfacial (or heterogeneous) enzyme reactions involve several reaction steps, and the established experimental approach to elucidate multi-step reactions is transient (or pre steady-state) kinetics. A key requirement for pre steady-state measurements is good time resolution, and while this has been amply achieved in different commercial instruments, they are generally not applicable to precipitating suspensions of insoluble substrate. Perhaps for this reason, transient kinetics has rarely been reported for heterogeneous enzyme reactions. Here, we describe a quenched-flow system using peristaltic pumps and stirred substrate suspensions with a dead time below 100 ms. The general performance was verified by alkali catalyzed hydrolysis of 2,4-dinitrophenyl acetate (DNPA), and the applicability to heterogeneous reactions was documented by two cellulases (Cel7A and Cel7B) acting on suspensions of microcrystalline cellulose (Avicel) at different loads up to 15 g/l. The results showed distinctive differences between the two enzymes. In particular, we found that endo-lytic Cel7B combined very quickly with the substrate and reached the maximal activity within the dead-time of the instrument. Conversely, exo-lytic Cel7A showed a much slower initiation with maximal activity after 5–8 s and a 10-fold lower turnover. We suggest that the instrument may provide an important tool in attempts to elucidate the mechanism of cellulases and other enzymes’ action on insoluble substrate. [ABSTRACT FROM AUTHOR]

Highlights: [•] An electrochemical biosensor based on pyranose dehydrogenase was developed. [•] The enzyme biosensor is not anomer specific. [•] The enzyme biosensor showed high sensitivity and stability. [•] The method can be used for real-time monitoring of cellulases activity on cellulose. [Copyright &y& Elsevier]

Abstract: Cellulases hydrolyze cellulose to soluble sugars and this process is utilized in sustainable industries based on lignocellulosic feedstock. Better analytical tools will be necessary to understand basic cellulase mechanisms, and hence deliver rational improvements of the industrial process. In this work we describe a new electrochemical approach to the quantification of the populations of enzyme that are respectively free in the aqueous bulk, adsorbed to the insoluble substrate with an unoccupied active site or threaded with the cellulose strand in the active tunnel. Distinction of these three states appears essential to the identification of the rate-limiting step. The method is based on disposable graphene-modified screen-printed carbon electrodes, and we show how the temporal development in the concentrations of the three enzyme forms can be derived from a combination of the electrochemical data and adsorption measurements. The approach was tested for the cellobiohydrolase Cel7A from Hypocrea jecorina acting on microcrystalline cellulose, and it was found that the threaded enzyme form dominates for this system while adsorbed enzyme with an unoccupied active site constitutes less than 5% of the population. [Copyright &y& Elsevier]

Abstract: Product inhibition of cellulolytic enzymes has been deemed a critical factor in the industrial saccharification of cellulosic biomass. Several investigations have addressed this problem using crude enzyme preparations or commercial (mixed) cellulase products, but quantitative information on individual cellulases hydrolyzing insoluble cellulose remains insufficient. Such knowledge is necessary to pinpoint and quantify inhibitory weak-links in cellulose hydrolysis, but has proven challenging to come by. Here we show that product inhibition of mono-component cellulases hydrolyzing unmodified cellulose may be monitored by calorimetry. The key advantage of this approach is that it directly measures the rate of hydrolysis while being essentially blind to the background of added product. We investigated the five major cellulases from Hypocrea jecorina (anamorph: Tricoderma reesei), Cel7A (formerly CBH1), Cel6A (CBH2), Cel7B (EG1), Cel5A (EG2) and Cel12A (EG3), for their sensitivity to the products glucose and cellobiose. The strongest inhibition was found for Cel7A, which showed a 50% activity-loss in 19mM cellobiose (IC50 =19mM). The other exoglucanase, Cel6A, was much less inhibited by cellobiose, but showed the highest sensitivity to glucose among all investigated enzymes. The endoglucanases Cel12A and Cel7B were moderately inhibited by cellobiose (IC50 =60–80mM), and weakly inhibited by glucose (IC50 =350–380mM). The highest resistance to both products was found for Cel5A, which retained about 75% of its activity at the highest investigated concentrations (respectively 65mM cellobiose and 1000mM glucose). [Copyright &y& Elsevier]

Abstract: The study of cellulolytic enzymes has traditionally been carried out using endpoint measurements by quantitation of reaction products using high-performance liquid chromatography (HPLC) or overall determination of produced reducing ends. To measure catalytic activity, model substrates such as solubilized cellulose derivates, soluble chromogenic, and flourogenic oligomeric substrates are often employed even though they do not reflect the natural insoluble substrate hydrolysis. Thermochemical methods using, for example, isothermal titration calorimetry (ITC) yield data where the primary observable is heat production. This can be converted to the rate of reaction and allows direct and continuous monitoring of the hydrolysis of complex substrates. To overcome the low molar enthalpy of the hydrolysis of the glycosidic bond, which is typically on the order of −2.5kJmol−1, an enzymatic signal amplification method has been developed to measure even slow hydrolytically active enzymes such as cellobiohydrolases. This method is explained in detail for the amplification of the heat signal by more than 130 times by using glucose oxidase and catalase. The kinetics of this complex coupled reaction system is thoroughly investigated, and the potential use to generate kinetic models of enzymatic hydrolysis of unmodified cellulosic substrates is demonstrated. [Copyright &y& Elsevier]

Measurement of steady-state rates (v SS) is straightforward in standard enzymology with soluble substrate, and it has been instrumental for comparative biochemical analyses within this area. For insoluble substrate, however, experimental values of v ss remain controversial, and this has strongly limited the amount and quality of comparative analyses for cellulases and other enzymes that act on the surface of an insoluble substrate. In the current work, we have measured progress curves over a wide range of conditions for two cellulases, TrCel6A and TrCel7A from Trichoderma reesei , acting on their natural, insoluble substrate, cellulose. Based on this, we consider practical compromises for the determination of experimental v SS values, and propose a basic protocol that provides representative reaction rates and is experimentally simple so that larger groups of enzymes and conditions can be readily assayed with standard laboratory equipment. We surmise that the suggested experimental approach can be useful in comparative biochemical studies of cellulases; an area that remains poorly developed. Image 1 • Enzymes acting on insoluble substrate are challenging to describe kinetically. • Initial steady-state rates can be estimated from simple end-point measurements. • Kinetic parameters defined for interfacial enzyme reactions. • Strategy proposed for comparative biochemical analysis of cellulases. [ABSTRACT FROM AUTHOR]