Search

The properties of chiral nematic and iridescent cellulose nanocrystal films with different monovalent cations (CNC-X) obtained through evaporation-induced self-assembly (EISA) can be modified by a variety of external stimuli. Here, we study the transformations of their optical and structural properties when the films are thermally annealed at 200 °C and 240 °C for up to 2 days. The chiral nematic structure of the most thermally stable films is not destroyed even after extensive heating due to the thermochemical stability of the cellulose backbone and the presence of surface alkali counterions, which suppress catalysis of early stage degradation. Despite the resilience of the cholesteric structure and the overall integrity of heated CNC-X films, thermal annealing is often accompanied by reduction of iridescence, birefringence, and transparency, as well as formation of degradation products. The versatility, sustainability, and stability of CNC-X films highlight their potential as temperature indicators and photonic devices., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Cellulose-derived materials, such as microcellulose and nanocellulose, are sustainable materials with a wide range of applications. Here, through a multi-analytical approach, we investigate the thermal degradation of microfibrillar cellulose filaments (CFs); acidic cellulose nanocrystals (CNC-H), containing sulfate half-ester groups on the surface; and neutralized cellulose nanocrystals (CNC-Na), where the protons are replaced by sodium ions. CFs have a simple degradation mechanism, associated with extensive dehydration, decarboxylation, and decarbonylation, and the highest thermal stability of the three (∼325 °C) despite the abundance of amorphous regions and inhomogeneous fibrous mass that make them structurally and morphologically less homogeneous than high-crystallinity CNCs. CNC-H decompose in a complex way below 200 °C, with large char fractions and evaporation of sulfur compounds at high temperatures, while sodium counterions in CNC-Na can improve the thermal stability up to 300 °C, where the pyrolysis leads to partial rehydration and formation of sodium hydroxide on the surface.

The introduction of polymers into a chiral nematic cellulose nanocrystal (CNC) matrix allows for the tuning of optical and mechanical properties, enabling the development of responsive photonic materials. In this study, we explored the incorporation of hydroxypropyl cellulose (HPC) into a CNC film prepared by slow evaporation. In the composite CNC/HPC thin films, the CNCs adopt a chiral nematic structure, which can selectively reflect certain wavelengths of light to yield a colored film. The color could be tuned across the visible spectrum by changing the concentration or molecular weight of the HPC. Importantly, the composite films were more flexible than pure CNC films with up to a ten-fold increase in elasticity and a decrease in stiffness and tensile strength of up to six times and four times, respectively. Surface modification of the films with methacrylate groups increased the hydrophobicity of the films, and therefore, the water stability of these materials was also improved.

The functionalization of cellulose nanocrystal (CNC) aerogels was achieved through a two-step synthetic procedure. CNC aerogels were prepared under hydrothermal conditions, followed by solvent exchange and critical point drying. The CNC aerogels were functionalized with a methacrylate group and then underwent thiol-ene click chemistry to impart a range of functionalities onto the surface of the CNC aerogel. The use of the functionalized aerogels as oil absorbents was then investigated, with the most hydrophobic CNC aerogel, 1 H,1 H,2 H,2 H-perfluorodecanethiol-functionalized CNC aerogel, exhibiting the highest absorption of xylenes at 2.9 mL g -1 .

We report the facile preparation of gels from the hydrothermal treatment of suspensions of cellulose nanocrystals (CNCs). The properties of the hydrogels have been investigated by rheology, electron microscopy, and spectroscopy with respect to variation in the temperature, time, and CNC concentration used in preparation. Desulfation of the CNCs at high temperature appears to be responsible for the gelation of the CNCs, giving highly porous networks. The viscosity and storage modulus of the gels was shown to increase when samples were prepared at higher treatment temperature. Considering the wide natural abundance and biocompatibility of CNCs, this simple, green approach to CNC-based hydrogels is attractive for producing materials that can be used in drug delivery, insulation, and as tissue scaffolds.

Demand for sustainable functional materials has never been larger. The introduction of functionality into pure cellulose might be one step forward in this field as it is one of the most abundant natural biopolymers. In this paper, we demonstrate a straightforward and scalable way to produce iridescent, mesoporous cellulose membranes with tunable colors and porosity. Concomitant assembly of cellulose nanocrystals (CNCs) and condensation of silica precursors results in CNC-silica composites with chiral nematic structures and tunable optical properties. Removal of the stabilizing silica matrix by alkaline or acid treatment gives access to novel chiral nematic mesoporous cellulose (CNMC) films. Importantly, the optical properties and the mesoporosity can be controlled by either varying the silica-to-CNC ratio, or by varying the substrate used during the evaporation-induced self-assembly process. In order to introduce additional functionality, CNMC has been used to stabilize gold nanoparticles with three different concentrations by wet impregnation. These materials are stable in water and can potentially function in sensors, tissue engineering or functional membranes.

Cellulose-based materials have been and continue to be exceptionally important for humankind. Considering the bioavailability and societal relevance of cellulose, turning this renewable resource into an active material is a vital step towards sustainability. Herein we report a new form of cellulose-derived material that combines tunable photonic properties with a unique mesoporous structure resulting from a new supramolecular cotemplating method. A composite of cellulose nanocrystals and a urea-formaldehyde resin organizes into a chiral nematic assembly, which yields a chiral nematic mesoporous continuum of desulfated cellulose nanocrystals after alkaline treatment. The mesoporous photonic cellulose (MPC) films undergo rapid and reversible changes in color upon swelling, and can be used for pressure sensing. These new active mesoporous cellulosic materials have potential applications in biosensing, optics, functional membranes, chiral separation, and tissue engineering., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Cellulose nanocrystals (CNCs) are obtained from the sulfuric acid-catalyzed hydrolysis of bulk cellulose. The nanocrystals have diameters of ~5-15 nm and lengths of ~100-300 nm (depending on the cellulose source and hydrolysis conditions). This lightweight material has mostly been investigated to reinforce composites and polymers because it has remarkable strength that rivals carbon nanotubes. But CNCs have an additional, less explored property: they organize into a chiral nematic (historically referred to as cholesteric) liquid crystal in water. When dried into a thin solid film, the CNCs retain the helicoidal chiral nematic order and assemble into a layered structure where the CNCs have aligned orientation within each layer, and their orientation rotates through the stack with a characteristic pitch (repeating distance). The cholesteric ordering can act as a 1-D photonic structure, selectively reflecting circularly polarized light that has a wavelength nearly matching the pitch. During CNC self-assembly, it is possible to add sol-gel precursors, such as Si(OMe)4, that undergo hydrolysis and condensation as the solvent evaporates, leading to a chiral nematic silica/CNC composite material. Calcination of the material in air destroys the cellulose template, leaving a high surface area mesoporous silica film that has pore diameters of ~3-10 nm. Importantly, the silica is brilliantly iridescent because the pores in its interior replicate the chiral nematic structure. These films may be useful as optical filters, reflectors, and membranes. In this Account, we describe our recent research into mesoporous films with chiral nematic order. Taking advantage of the chiral nematic order and nanoscale of the CNC templates, new functional materials can be prepared. For example, heating the silica/CNC composites under an inert atmosphere followed by removal of the silica leaves highly ordered, mesoporous carbon films that can be used as supercapacitor electrodes. The composition of the mesoporous films can be varied by using assorted organosilica precursors. After removal of the cellulose by acid-catalyzed hydrolysis, highly porous, iridescent organosilica films are obtained. These materials are flexible and offer the ability to tune the chemical and mechanical properties through variation of the organic spacer. Chiral nematic mesoporous silica and organosilica materials, obtainable as centimeter-scale freestanding films, are interesting hosts for nanomaterials. When noble metal nanoparticles are incorporated into the pores, they show strong circular dichroism signals associated with their surface plasmon resonances that arise from dipolar coupling of the particles within the chiral nematic host. Fluorescent conjugated polymers show induced circular dichroism spectra when encapsulated in the chiral nematic host. The porosity, film structure, and optical properties of these materials could enable their use in sensors. We describe the development of chiral nematic mesoporous silica and organosilica, demonstrate different avenues of host-guest chemistry, and identify future directions that exploit the unique combination of properties present in these materials. The examples covered in this Account demonstrate that there is a rich diversity of composite materials accessible using CNC templating.

Chirality at the molecular level is found in diverse biological structures, such as polysaccharides, proteins and DNA, and is responsible for many of their unique properties. Introducing chirality into porous inorganic solids may produce new types of materials that could be useful for chiral separation, stereospecific catalysis, chiral recognition (sensing) and photonic materials. Template synthesis of inorganic solids using the self-assembly of lyotropic liquid crystals offers access to materials with well-defined porous structures, but only recently has chirality been introduced into hexagonal mesostructures through the use of a chiral surfactant. Efforts to impart chirality at a larger length scale using self-assembly are almost unknown. Here we describe the development of a photonic mesoporous inorganic solid that is a cast of a chiral nematic liquid crystal formed from nanocrystalline cellulose. These materials may be obtained as free-standing films with high surface area. The peak reflected wavelength of the films can be varied across the entire visible spectrum and into the near-infrared through simple changes in the synthetic conditions. To the best of our knowledge these are the first materials to combine mesoporosity with long-range chiral ordering that produces photonic properties. Our findings could lead to the development of new materials for applications in, for example, tuneable reflective filters and sensors. In addition, this type of material could be used as a hard template to generate other new materials with chiral nematic structures.

Photochromic methyl viologen/cellulose nanocrystal (CNC) films were prepared and investigated. They show vibrant color on exposure to UV light and, using air as an oxidant, the films could be erased and rewritten over multiple cycles. These films are attractive for applications in photo-patterning, encryption, and UV light sensing. [ABSTRACT FROM AUTHOR]

The quest for advanced water purification technologies has been vigorous over recent decades, motivated by the promise of ever more efficient, greener, and affordable tools. Halloysite nanotubes (HNTs) are naturally-occurring materials that have shown potential as dye sorbents. Unfortunately, these nanoclays suffer from low permeation during water treatment, which limits their widespread application. Here, we use cellulose nanocrystals (CNCs) as structural scaffolds to support HNTs and fabricate permeable aerogel sorbent materials with mechanical stability. Aerogels containing 40 wt% HNTs showed a maximum dye adsorption capacity of 60 mg g−1 towards methylene blue, with only 15% decay in efficiency after 5 cycles. The good mechanical properties of these materials allowed for their incorporation into free-flowing purification columns that displayed excellent dye removal ability. Overall, this work provides a new strategy to fabricate green, renewable, and low-cost sorbent materials for the removal of dyes and shows potential for the sorption of other ionic pollutants. [ABSTRACT FROM AUTHOR]

Responsive photonic crystals have potential applications in mechanical sensors and soft displays; however, new materials are constantly desired to provide new innovations and improve on existing technologies. To address this, we report stretchable chiral nematic cellulose nanocrystal (CNC) elastomer composites that exhibit reversible visible color upon the application of mechanical stress. When stretched (or compressed) the colorless materials maintain their chiral nematic structure but the helical pitch is reduced into the visible region, resulting in coloration of the CNC‐elastomer composite. By increasing the percentage elongation of the material (ca. 50–300 %), the structural color can be tuned from red to blue. The color of the materials was characterized by reflectance optical microscopy and reflectance circular dichroism to confirm the wavelength and polarization of the reflected light. We also probed the mechanism of the structural color using 2D‐X‐ray diffraction. Finally, by either water‐patterning the starting CNC film, or by forming a CNC film with gradient color, through masked evaporation, we were able to prepare encoded stretchable chiral nematic CNC‐elastomers. [ABSTRACT FROM AUTHOR]

Copyright of Angewandte Chemie is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Cellulose nanocrystals (CNCs), known for more than 50 years, have attracted attention because of their unique properties such as high specific strength and modulus, high surface area, and fascinating optical properties. Just recently, however, their potential in supramolecular templating was identified by making use of their self-assembly behavior in aqueous dispersions in the presence of compatible precursors. The combination of the mesoporosity, photonic properties, and chiral nematic order of the materials, which are available as freestanding films, has led to a significant number of interesting and promising discoveries towards new functional materials. This Review summarizes the use of cellulose derivatives, especially CNCs, as novel templates and gives an overview of the recent developments toward new functional materials. [ABSTRACT FROM AUTHOR]

Gold nanoparticles (NPs) have been loaded into mesoporous photonic cellulose (MPC) films. The NPs show a low polydispersity and a nanoparticle-based plasmonic chiroptical activity with potential for novel sensing materials [ABSTRACT FROM AUTHOR]

Cellulose-based materials have been and continue to be exceptionally important for humankind. Considering the bioavailability and societal relevance of cellulose, turning this renewable resource into an active material is a vital step towards sustainability. Herein we report a new form of cellulose-derived material that combines tunable photonic properties with a unique mesoporous structure resulting from a new supramolecular cotemplating method. A composite of cellulose nanocrystals and a urea-formaldehyde resin organizes into a chiral nematic assembly, which yields a chiral nematic mesoporous continuum of desulfated cellulose nanocrystals after alkaline treatment. The mesoporous photonic cellulose (MPC) films undergo rapid and reversible changes in color upon swelling, and can be used for pressure sensing. These new active mesoporous cellulosic materials have potential applications in biosensing, optics, functional membranes, chiral separation, and tissue engineering. [ABSTRACT FROM AUTHOR]

A detailed investigation of the formation and properties of mesoporous silica templated by the chiral nematic liquid crystal phase of cellulose nanocrystals (CNCs) is presented. Under appropriate conditions, CNCs co-assemble with silica up to loadings of ≈60 wt% to give composite films with periodic chiral nanostructures. The periodicity of these films can be readily controlled to obtain materials that selectively reflect light with wavelengths ranging from ≈400-1400 nm. The co-assembly of CNCs and silica into ordered chiral nematic structures is demonstrated to occur within a narrow window of pH and is affected by aging: a slow rate of silica condensation appears to be vital for the formation of well-ordered materials. CNCs can be removed from the composite films by calcination or acid hydrolysis to give high surface area chiral nematic mesoporous silica (CNMS) with tunable pore diameters. The combination of mesoporosity and chiral nematic ordering in CNMS enables it to be used in a unique way for refractometric sensing applications. It is shown that, when using circular dichroism (CD) signals to monitor the chiral photonic properties of CNMS, variations in refractive index can be detected based on changes of both CD signal intensity and peak position with good sensitivity. [ABSTRACT FROM AUTHOR]

Alles in Ordnung: Die Selbstorganisation von nanokristalliner Cellulose (NCC) mit Hydrogelmonomeren ergibt Nanokomposite mit chiral ‐ nematischer Fernordnung. Die Kombination der chiralen Struktur mit dem Quellverhalten von Hydrogelen resultiert in einem Schillern, das durch verschiedene Reize kontrolliert werden kann. [ABSTRACT FROM AUTHOR]

Colors of nature: Mimicking of the structural colors of nature was achieved by the preparation of easily accessible chiral nematic polymer composites based on phenol–formaldehyde resins templated by cellulose nanocrystals. Removal of the template led to mesoporous polymer films with unique optical and physical properties. The potential application of these materials in optical sensors was also demonstrated. [ABSTRACT FROM AUTHOR]

Review: [materials templated by cellulose nanocrystals, and their use in various optical applications such as optical filters, sensors, and optoelectronics; 131 refs. [ABSTRACT FROM AUTHOR]