Search

This study presents the ex situ development and characterization of bacterial cellulose (BC) membranes loaded with bioactive Sage and Neem extracts for enhanced antimicrobial applications. Utilizing discarded fruit waste as a cost-effective carbon source, BC production was optimized, yielding membranes with improved properties. Neem and Sage extracts, obtained via Soxhlet extraction, exhibited significant antibacterial activity against Escherichia coli and Staphylococcus aureus, with minimum inhibitory concentrations of 3.125 mg/mL and 25 mg/mL, respectively, for Neem extract, and 25 mg/mL and 50 mg/mL for Sage extract. These extracts (20 wt%) were successfully incorporated into BC membranes ex situ, resulting in BC-Neem (BC-N) and BC-Sage (BC-S) composites. Fourier-transform infrared spectroscopy (FTIR) confirmed the chemical interactions between the extracts and the BC matrix, revealing the introduction of new functional groups and enhancing the composite properties. Scanning electron microscopy (SEM) illustrated changes in morphology, indicating deeper penetration and attachment of the extracts within the BC structure. Quantitative analysis of water holding capacity demonstrated that BC-N and BC-S absorbed about 90 times water of their dry weight. Antibacterial assays through the colony-forming unit method showed that BC-N significantly inhibited S. aureus growth by 78 % and E. coli by 51 %, while BC-S exhibited a 48 % reduction against S. aureus. Agar disc-diffusion assay showed the formation of inhibition zones of 1.2 cm and 0.1 cm by BC-N against S. aureus and E. coli, respectively, in contrast to 0.2 cm and no inhibition by BC-S composite. These results highlight the potential of bioactive plant extract-loaded BC membranes as effective antimicrobial agents, offering a sustainable alternative to conventional materials in medical and food packaging applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The rapid and sensitive detection of Salmonella typhimurium in food matrices is crucial for ensuring food safety. This study presents the development of an ultrasensitive electrochemical biosensor using surface-modified bacterial cellulose (BC) integrated with polypyrrole (Ppy) and reduced graphene oxide (RGO), further functionalized with immobilized S. typhimurium -specific phage particles. The BC substrate, with its ultra-fibrous and porous structure, was modified through in situ oxidative polymerization of Ppy and RGO, resulting in a highly conductive and flexible biointerface. The immobilization of phages onto this composite was facilitated by electrostatic interactions between the polycationic Ppy and the negatively charged phage capsid heads, optimizing phage orientation and enhancing bacterial capture efficiency. Morphological and chemical characterization confirmed the successful fabrication and phage immobilization. The biosensor demonstrated a detection limit of 1 CFU/mL for S. typhimurium in phosphate-buffered saline (PBS), with a linear detection range spanning 10 0 to 10 7 CFU/mL. In real samples, the sensor achieved detection limits of 5 CFU/mL in milk and 3 CFU/mL in chicken, with a linear detection range spanning 10 0 to 10 6 CFU/mL, maintaining high accuracy and reproducibility. The biosensor also effectively discriminated between live and dead bacterial cells, demonstrating its potential in real-world food safety applications. The biosensor performed excellently over a wide pH range (4-10) and remained stable for up to six weeks. Overall, the developed BC/Ppy/RGO-phage biosensor offers a promising tool for the rapid, sensitive, and selective detection of S. typhimurium , with robust performance across different food matrices.

Bacterial cellulose (BC), an extracellular polysaccharide, is a versatile biopolymer due to its intrinsic physicochemical properties, broad-spectrum applications, and remarkable achievements in different fields, especially in the biomedical field. Presently, the focus of BC-related research is on the development of scaffolds containing other materials for in-vitro and in-vivo biomedical applications. To this end, prime research objectives concern the biocompatibility of BC and the development of three-dimensional (3D) BC-based scaffolds. This review summarizes the techniques used to develop 3D BC scaffolds and discusses their potential merits and limitations. In addition, we discuss the various biomedical applications of BC-based scaffolds for which the 3D BC matrix confers desired structural and conformational features. Overall, this review provides comprehensive coverage of the idea, requirements, synthetic strategies, and current and prospective applications of 3D BC scaffolds, and thus, should be useful for researchers working with polysaccharides, biopolymers, or composite materials., (Copyright © 2022. Published by Elsevier B.V.)

Bacterial cellulose (BC) has received immense interest in medical, pharmaceutical, and other related fields owing to its intrinsic physical, mechanical, and biological features. Its structural features offer an ideal environment for developing composites, thereby further extending its areas of applications. BC was initially used in wound dressing, artificial blood vessels, organ development, and tissue regeneration; however, the recent focus has switched to 3D printing techniques. BC can serve as suitable material for treating different cancers due to unique liquid absorbing and drug loading properties. BC-based scaffolds have been synthesized and tested for in vitro culturing of cancer cells to simulate tumor microenvironments. These scaffolds support normal growth of cancer cells, particularly breast and ovarian cancer cells, showing significant adhesion, proliferation, ingrowth, and differentiation. This review describes the different approaches of manipulating BC for use in medicine, with particular focus on the applications of BC composites in cancer treatment. A detailed discussion about various formulations of BC in multiple cancer therapeutics is summarized., Competing Interests: Declaration of competing interest All authors have no personal or financial conflicts of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Biopolymers and their composites have been extensively investigated in recent years for multiple applications, especially in environmental, medical, and pharmaceutical fields. Bacterial cellulose (BC) has emerged as a novel biomaterial owing to its nontoxic, high-liquid absorbing and holding capacity, drug-carrying ability, and pollutant absorbing features. Additionally, its web-shaped three-dimensional (3D) structure and hydrogen bonding sites have incited a combination of various nanoparticles, polymers, and other materials with BC in the form of composites. Such BC-based composites have been developed through in-situ, ex-situ, and solution casting methods for targeted applications, such as air and water filters, controlled drug delivery systems, wound dressing materials, and tissue regeneration. This review details the production and development of BCbased composites with different materials and by various methods. It further describes various applications of BC-based composites in the environmental and pharmaceutical sectors, with specific examples from the recent literature. This review could potentially appeal a wide readership in these two emerging fields, where novel and advanced materials for different applications have been developed on a regular basis using BC as the base material., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Bacterial cellulose (BC) has emerged as a biomaterial for diverse biomedical applications owing to its unique structural, physico-chemical, mechanical, and biological features. Its porous geometry and three-dimensional fibrous structure allow the impregnation of various materials into its matrix. The current study was aimed to fabricate 3D scaffolds of bacterial cellulose and chitosan (BC-Chi) through a one-step ex situ solution impregnation strategy and analyze the scaffold interaction with the ovarian cancer cell lines (A2780). Field emission scanning electron microscopy (FE-SEM) showed successful impregnation of chitosan into the BC matrix. Phase-contrast and confocal microscopy analyses revealed that human ovarian cancer cell lines (A2780) were adhered not only to the surface but deeply infiltrated into the matrix of BC-Chi scaffold. WST-1 assay, histology analysis, and cytoskeleton and nuclear staining showed high viability, proliferation, and infiltration of A2780 cell lines into the scaffold. The RT-PCR analysis revealed a decreased mRNA level of Notch receptors, indicating a strong cell-scaffold interaction. The improved biocompatibility, non-toxicity, and 3D structure of fabricated BC-Chi scaffold justify its potential applications diagnosis of ovarian cancer in vivo., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Bacterial cellulose (BC), representing the highly purified form of cellulose, possesses better nanofibrous morphology and superior mechanical properties than plant cellulose (PC). However, the regeneration process, which produces intermediate structures, significantly alters the original properties of native cellulose and result in varied structural and physico-mechanical features. Therefore, it is important to estimate the degree of variations in the structures and properties of both PC and BC during their regeneration. Herein, we conducted a detailed comparative study by dissolving BC and PC in N-methylmorpholine N-oxide (NMMO) and synthesizing their regenerated gels, namely regenerated bacterial cellulose (RBC) and regenerated plant cellulose (RPC), respectively. The structural features of BC, PC, RBC, and RPC were comparatively evaluated via field-emission scanning electron microscopy, X-ray diffraction, porosity analyses, as well as analyzed their mechanical, thermal, and liquid-holding capabilities. The results showed inferior mechanical, thermal, and crystalline features of RBC and RPC to their respective counterparts. However, RBC showed better porosity, water absorption capability, and water retention time than RPC. The overall mechanical, thermal, and physiological features of RBC were better than those of RPC. These findings may facilitate the use of RBC in composite synthesis for various applications., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Bacterial cellulose (BC) is a promising biopolymer with wound healing and tissue regenerative properties but lack of antimicrobial property limits its biomedical applications. Therefore, current study was proposed to combine wound healing property of BC with antimicrobial activity of montmorillonite (MMT) and modified montmorillonites (Cu-MMT, Na-MMT and Ca-MMT) to design novel artificial substitute for burns. Designed nanocomposites were characterized through Fe-SEM, FTIR and XRD. The antimicrobial activities of composites were tested against Escherichia coli, Salmonella typhimurium, Citrobacter fruendii, Pseudomonas aeruginosa, Staphylococcus aureus and Methicillin-resistant Staphylococcus aureus. Tissue regeneration and wound healing activities of the composites were assessed in burn mice model. Physico-chemical characterization confirmed the loading of MMT onto surface and BC matrix. Modified MMTs-BC nanocomposites showed clear inhibitory zone against the tested pathogens. Animals treated with modified MMTs-BC nanocomposites exhibited enhanced wound healing activity with tissue regeneration, reepithelialization, healthy granulation and vascularization. These findings demonstrated that modified MMTs-BC nanocomposites could be used as a novel artificial skin substitute for burn patients and scaffold for skin tissue engineering., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

This study reports the fabrication of porogen-induced, surface-modified, 3-dimensionally microporous regenerated bacterial cellulose (rBC)/gelatin (3DMP rBC/G) scaffolds for skin regeneration applications. Round shaped gelatin microspheres (GMS), fabricated using a water-in-oil emulsion (WOE) method, were utilized as the porogen. The dissolution of GMS from the solution casted BC scaffolds led to surface-modified microporous rBC. The scaffolds were characterized using field emission scanning electron microscopy (FE-SEM) and elemental analysis. FE-SEM analysis confirmed the regular microporosity of the 3DMP rBC/G scaffolds, while elemental analysis confirmed the successful surface modification of cellulose with gelatin. In vitro tests showed good adhesion and proliferation of human keratinocytes (HaCaT) on the 3DMP rBC/G scaffolds during 7 days of incubation. Confocal microscopy showed penetration of HaCaT cells into the scaffolds, up to 300 μm in depth. In vivo wound healing and skin regeneration experiments, in experimental mice, showed complete skin regeneration within 2 weeks. The wound closure efficacy of the 3DMP rBC/G scaffolds was much higher (93%) than that of the control (47%) and pure BC-treated (63%) wounds. These results indicated that our 3DMP rBC/G scaffolds represent future candidate materials for skin regeneration applications., (Copyright © 2018 Elsevier B.V. All rights reserved.)

This study reports the fabrication of highly conducting and biocompatible bacterial cellulose (BC)-gold nanoparticles (AuNPs)-poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) (BC-AuNPs-PEDOT:PSS) composites for biology-device interface applications. The composites were fabricated using ex situ incorporation of AuNPs and PEDOT:PSS into the BC matrix. Structural characterization, using scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and x-ray diffraction (XRD) analysis, confirmed the uniform nature of the synthesized BC-AuNPs and BC-AuNPs-PEDOT:PSS composites. Four-point probe analysis indicated that the BC-AuNPs and BC-AuNPs-PEDOT:PSS films had high electrical conductivity. The composites were also tested for biocompatibility with animal osteoblasts (MC3T3-E1). The composite films supported adhesion, growth, and proliferation of MC3T3-E1 cells, indicating that they are biocompatible and non-cytotoxic. AuNPs and PEDOT:PSS, imparted a voltage response, while BC imparted biocompatibility and bio-adhesion to the nanocomposites. Therefore, our BC-AuNPs-PEDOT:PSS composites are candidate materials for biology-device interfaces to produce implantable devices in regenerative medicine., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Bacterial cellulose possesses physical and mechanical properties of an ideal wound dressing material but lack of antimicrobial activity limits its biomedical applications. Therefore, in current study, the inherent wound healing characteristics of bacterial cellulose and antimicrobial properties of zinc oxide nanoparticles were combined. The reinforcement (impregnation) of zinc oxide nanoparticles into bacterial cellulose sheets was confirmed through various characterization techniques. The antimicrobial capacity of bacterial cellulose-zinc oxide nanocomposites was tested against common burn pathogens. The in-vivo wound healing and tissue regeneration of the nanocomposites was investigated in burn BALB c mice model. Characterization techniques confirmed the successful impregnation of nanoparticles into bacterial cellulose. Bacterial cellulose-zinc oxide nanocomposites exhibited 90%, 87.4%, 94.3% and 90.9% activity against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Citrobacter freundii, respectively. Bacterial cellulose-zinc oxide nanocomposites treated animals showed significant (66%) healing activity. The histological analysis revealed fine tissue regeneration in composites treated group. These findings suggest that bacterial cellulose-zinc oxide nanocomposites could be a novel dressing material for burns., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

This study was aimed to characterize the structural and physico-mechanical properties of bio-cellulose produced through cell-free system. Fourier transform-infrared spectrum illustrated exact matching of structural peaks with microbial cellulose, used as reference. Field-emission scanning electron microscopy revealed that fibrils of bio-cellulose were thicker and more compact than microbial cellulose. The specific positions of peaks in the X-ray diffraction and nuclear magnetic resonance spectra indicated that bio-cellulose possessed cellulose II polymorphic structure. Bio-cellulose presented superior physico-mechanical properties than microbial cellulose. The water holding capacity of bio-cellulose and microbial cellulose were found to be 188.6 ± 5.41 and 167.4 ± 4.32 times their dry-weights, respectively. Tensile strengths and degradation temperature of bio-cellulose were 17.63 MPa and 352 °C, respectively compared to 14.71 MPa and 327 °C of microbial cellulose. Overall, the results indicated successful synthesis and superior properties of bio-cellulose that advocate its effectiveness for various applications., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Background: Cellulose being the most abundant polymer has been widely utilized in multiple applications. Its impressive nanofibril arrangement has provoked its applications in numerous fields. Recent trends have been shifted to produce composites of nanocellulose for numerous applications among which the most important ones are its use in medical and environmental prospective. This review has basically focused the development of nanocellulose composites and its applications in resolving environmental hazards., Methods: We have reviewed large number of research and review articles from famous journals using a focused review question. The quality of retrieved papers was assessed through standard tools. The contents from reviewed articles were described in scientific way., Results: We included 85 papers including research and review articles and patents in this review. 18 papers introduced the theme of current review. More than 10 papers were used to describe the approaches used for synthesizing cellullose nanocomposites. Composite synthesis strategies included the in situ addition, ex situ penetration, solution mixing, and solvent casting etc. Around 60 manuscripts including 6 patents were used to demonstrate various applications of nanocellulose composites. Nanocellulose based materials offer several applications in the development of antimicrobial filters, air and water filters, filters for removal of heavy metals, pollutant sensors as well as applications in catalysis and energy sectors. Such products are more efficient, robust, reliable, and environment-friendly., Conclusion: This review gives a comprehensive picture of ongoing research and development on environmental remediation by nanotechnology. We hope that the contents reviewed herein will catch the reader's interest and will provide interesting background to extend future research activities regarding cellulose based materials.

Bacterial cellulose (BC), owing to its pure nature and impressive physicochemical properties, including high mechanical strength, crystallinity, porous fibrous structure, and liquid absorbing capabilities, has emerged as an advanced biomaterial. To match the market demand and economic values, BC has been produced through a number of synthetic routes, leading to slightly different structural features and physical appearance. Chemical nature, porous geometry, and 3D fibrous structure of BC make it an ideal material for composites synthesis that successfully overcome certain deficiencies of pure BC. In this review, we have focused various strategies developed for synthesizing BC and BC composites. Reinforcement materials including nanoparticles and polymers have enhanced the antimicrobial, conducting, magnetic, biocompatible, and mechanical properties of BC. Both pure BC and its composites have shown impressive applications in medical fields and in the development of optoelectronic devices. Herein, we have given a special attention to discuss its applications in the medical and electronic fields. In conclusion, BC and BC composites have realistic potential to be used in future development of medical devices, artificial organs and electronic and conducting materials. The contents discussed herein will provide an eye-catching theme to the researchers concerned with practical applications of BC and BC composites., (Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The current study was intended to produce bio-cellulose through a cell-free system developed by disrupting Gluconacetobacter hansenii PJK through bead-beating. Microscopic analysis indicated the complete disruption of cells (2.6 × 10(7) cells/mL) in 20 min that added 95.12 μg/mL protein, 1.63 mM ATP, and 1.11 mM NADH into the medium. A liquid chromatography mass spectrometry/mass spectrometry linear trap quadrupole (LC-MS/MS LTQ) Orbitrap analysis of cell-lysate confirmed the presence of all key enzymes for bio-cellulose synthesis. Under static conditions at 30 °C, microbial and cell-free systems produced 3.78 and 3.72 g/L cellulose, corresponding to 39.62 and 57.68% yield, respectively after 15 days. The improved yield based on consumed glucose indicated the superiority of cell-free system. Based on current findings and literature, we hypothesized a synthetic pathway for bio-cellulose synthesis in the cell-free system. This approach can overcome some limitations of cellulose-producing cells and offers a wider scope for synthesizing cellulose composites with bactericidal elements through in situ synthesizing approaches., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Electrically conducting bacterial cellulose (BC) membranes were prepared by ex situ incorporation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (, Pedot: PSS) into BC pellicles. The BC pellicles were immersed into an aqueous solution of, Pedot: PSS for 6, 12, 18, or 24h, and the resultant composites were vacuum dried at ambient temperature. The structural features of the composites were determined using X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), Fourier-transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD). XPS confirmed synthesis of the composites, and SEM showed uniform incorporation of, Pedot: PSS into the BC matrix. The FTIR spectra of the composites exhibited characteristic bands for both BC and, Pedot: PSS, and XRD analysis showed a slight decrease in crystallinity during composite preparation. The electrical conductivity of the composites was 12.17S/cm for incorporation of 31.24 wt%, Pedot: PSS into the BC matrix. These highly conducting BC-PEDOT:PSS composites are expected to find potential applications in optoelectronic devices such as biosensors, organic light-emitting diodes, and solar cells., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Bacterial cellulose (BC) has received substantial interest owing to its unique structural features and impressive physico-mechanical properties. BC has a variety of applications in biomedical fields, including use as biomaterial for artificial skin, artificial blood vessels, vascular grafts, scaffolds for tissue engineering, and wound dressing. However, pristine BC lacks certain properties, which limits its applications in various fields; therefore, synthesis of BC composites has been conducted to address these limitations. A variety of BC composite synthetic strategies have been developed based on the nature and relevant applications of the combined materials. BC composites are primarily synthesized through in situ addition of reinforcement materials to BC synthetic media or the ex situ penetration of such materials into BC microfibrils. Polymer blending and solution mixing are less frequently used synthetic approaches. BC composites have been synthesized using numerous materials ranging from organic polymers to inorganic nanoparticles. In medical fields, these composites are used for tissue regeneration, healing of deep wounds, enzyme immobilization, and synthesis of medical devices that could replace cardiovascular and other connective tissues. Various electrical products, including biosensors, biocatalysts, E-papers, display devices, electrical instruments, and optoelectronic devices, are prepared from BC composites with conductive materials. In this review, we compiled various synthetic approaches for BC composite synthesis, classes of BC composites, and applications of BC composites. This study will increase interest in BC composites and the development of new ideas in this field., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The addition of certain supplementary carbon sources to the culture media can influence the production, structural features and mechanical properties of bacterial cellulose (BC). In this study, different concentrations (0, 1, 2 and 4%) of a by-product, single sugar α-linked glucuronic acid-based oligosaccharide (SSGO), were added to the culture media during the production of BC. Production with 1% (BC1), 2% (BC2) and 4% (BC3) SSGO led to increases in BC production of 10.45, 12.74 and 9.01 g/L, respectively, after 10 days of cultivation under static conditions, while it was only 7.4 g/L when no SSGO was added (BC0). The structures of BC0, BC1, BC2, and BC3 were confirmed by XRD and FT-IR analysis. FE-SEM micrographs showed increased fibril thickness and decreased pore size in the SSGO added samples. The tensile strength of the BC0 was 16.73 MPa, while it was 25.05 MPa for BC1. However, with further increases in the concentration of SSGO, the tensile strength decreased to 20.76 and 19.77 MPa for BC2 and BC3, respectively. The results of this study provide further insight into the additive role of SSGO and improvement of the physico-mechanical properties of BC., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Polymer composites containing solid clay nanoparticles have attracted immense attention due to the reinforced physico-mechanical properties of the final product. Bacterial cellulose-montmorillonite (BC-MMT) composites were prepared by impregnation of BC sheets with MMT suspension. FE-SEM showed that MMT adsorbed onto the surface as well as penetrated into the matrix of the BC sheets. Peaks for both BC and MMT were present in the FT-IR spectrum of the composite. XRD also showed diffraction peaks for MMT and BC with a slight decrease in the composite crystallinity from 63.22% of pure BC to 49.68% of BC-MMT3. The mechanical and thermal properties of BC-MMT composites were significantly improved compared to those of the pure BC. Tensile strength for composites was increased up to 210 MPa from 151.3 Mpa (BC) while their degradation temperature extended from 232 °C (BC) up to 310 °C. Similarly, the water holding capacity was decreased while the water release rate was improved for the BC-MMT composites as compared to the pure BC., (Copyright © 2012 Elsevier Ltd. All rights reserved.)