Search

This study describes the valorization of rice and oat husks by obtaining cellulose nanocrystals for the production of aerogels for food packaging applications. Commercial cellulose was used as a control sample. Nanocrystals from cellulose were obtained by enzymatic hydrolysis and mechanical treatment at high pressure. The morphology, particle size, functional groups, crystallinity, and thermal properties of the cellulose nanocrystals were analyzed. The morphology, functional groups, crystallinity, water absorption capability, and zeta potential of aerogels were also analyzed. Cellulose nanocrystals show different structural properties and crystallinity depending on the source of the cellulose. The average diameter of the nanocrystals varied from 16.0 to 28.8 nm. The aerogels prepared with cellulose nanocrystals showed a porous and uniform structure with a water absorption capacity between 264.2% and 402.8% at 25 °C. The aerogel of oat cellulose nanocrystals showed a larger pore size than that of eucalyptus cellulose nanocrystals, and this may have influenced the lowest water absorption capacity of the aerogels of eucalyptus cellulose nanocrystals. These results show that agroindustrial residues have promising applications in various industrial fields and could be used as aerogel absorbers of water in food packaging., (Copyright © 2018. Published by Elsevier B.V.)

The commercial cellulose fibers and cellulose fibers extracted from rice and oat husks were analyzed by chemical composition, morphology, functional groups, crystallinity and thermal properties. The cellulose fibers from rice and oat husks were used to produce hydrogels with poly (vinyl alcohol). The fibers presented different structural, crystallinity, and thermal properties, depending on the cellulose source. The hydrogel from rice cellulose fibers had a network structure with a similar agglomeration sponge, with more homogeneous pores compared to the hydrogel from oat cellulose fibers. The hydrogels prepared from the cellulose extracted from rice and oat husks showed water absorption capacity of 141.6-392.1% and high opacity. The highest water absorption capacity and maximum stress the compression were presented by rice cellulose hydrogel at 25°C. These results show that the use of agro-industrial residues is promising for the biomaterial field, especially in the preparation of hydrogels., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Background: Biodegradable films of native or acetylated starches with different concentrations of cellulose fibers (0%, 10% and 20%) were prepared. The films were characterized by morphological, mechanical, barrier, and thermal properties., Result: The tensile strength of the acetylated starch film was lower than those of the native starch film, without fibers. The addition of fibers increased the tensile strength and decreased the elongation and the moisture of native and acetylated starches films. The acetylated starch film showed higher water solubility when compared to native starch film. The addition of cellulose fibers reduced the water solubility of the acetylated starch film. The films reinforced with cellulose fiber exhibited a higher initial decomposition temperature and thermal stability., Conclusion: The mechanical, barrier, solubility, and thermal properties are factors which direct the type of the film application in packaging for food products. The films elaborated with acetylated starches of low degree of substitution were not effective in a reduction of the water vapor permeability. The addition of the cellulose fiber in acetylated and native starches films can contribute to the development of more resistant films to be applied in food systems that need to maintain their integrity. © 2016 Society of Chemical Industry., (© 2016 Society of Chemical Industry.)