Search

Short circuit (SC) strength of a power transformer is influenced by its winding clamping pressure. The required level of clamping pressure is selected at the design stage based on the maximum allowable SC current level of the transformer. Progressive loss of clamping pressure is a common problem in power transformers. Shrinkage and fading of the stiffness of solid insulation due to thermal degradation are the most common causes of this problem. It has also been identified that changes in the moisture content and repetitive compression cycles on pressboard during high current faults tend to change the winding clamping pressure. This study aims to investigate the effects of moisture and compression cycles on winding clamping pressure through a set of laboratory experiments and finite element analyses. Thickness change and compressive stress-strain curves of pressboard were measured under different moisture conditions. The results were then used to calculate changes in winding geometry and clamping pressure of a 100 kVA three phase, disc type transformer winding. [ABSTRACT FROM PUBLISHER]

Cellulose based insulation materials and mineral oils have widely been used in liquid filled transformers. Environmental and fire-safety concerns have accelerated the use of Natural Esters (NE) as a sustainable alternative to mineral oil. There is a rapid growth of their application for distribution level transformers. To ensure a safe and long-term operation of the vegetable oil filled transformers, it is necessary to clarify the knowledge gaps with respect to the ageing of vegetable oil impregnated cellulose and insulation diagnostic methods. The condition monitoring of mineral oil filled transformers has been well characterised, due to the numerous laboratory and field studies conducted during the past several decades. The application of these available condition monitoring techniques for NE filled transformers is yet to be validated as the use of NE for power transformers is in the evaluation stage. In this paper the performance of NE as insulation in transformers by evaluating the ageing of NE impregnated cellulose pressboard is presented. For this purpose, an accelerated ageing experiment has been carried out in sealed tubes at 120 °C. The ageing of oil impregnated pressboard has been characterised by decrease in the degree of polymerisation (DP) of pressboard, and the formation of both 2-furfuraldehyde and dissolved carbon dioxide (CO2) in the oil. The structural changes of cellulose have been supported by Fourier Transform Infrared (FTIR) spectra. Moreover, the results have been compared with cellulose insulation samples aged under similar conditions in conventional mineral oil. Acidity value, dissipation factor and viscosity measurements have been used to compare the stability of NE in a transformer operating environment to mineral oil. [ABSTRACT FROM PUBLISHER]