Search

Nanofibrillated cellulose (NFC) and polymethylsilsesquioxane (PMSQ) based aerogel are prepared by the sol-gel method. The objective of this work is to study the impact of surfactant and base catalyst on the thermal and mechanical performance of the corresponding aerogel. The rheological premonitory assists in predicting the bulk properties of the aerogel. The chemical structure of the aerogel is studied by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and solid-state nuclear magnetic resonance (NMR). X-ray microtomographic (XMT) analysis confirms the homogeneous and monolithic structure of the aerogel. The lowest thermal conductivity is achieved as 23.21 mW m -1 K -1 with V-0 and HBF rating through UL-94 test. Thermal performance of aerogels is cross-verified through modeling and simulation in COMSOL multiphysics platform. The mechanical properties of aerogel are evaluated by monolithic compression test in axial and radial compression test up to 90% strain, cyclic compression loading-unloading, and reloading test, flexural test, and dynamic mechanical analysis. The time-temperature analysis has shown around 5 °C temperature difference in the middle of the room after using the aerogel panel at the exposed surface, which assists in the practical application of the synthesized aerogel panel., (© 2022 Wiley-VCH GmbH.)

Bio-composite aerogels based on bleached cellulose fibers (BCF) and cellulose nanoparticles having various morphological and physico-chemical characteristics are prepared by a freeze-drying technique and characterized. The various composite aerogels obtained were compared to a BCF aerogel used as the reference. Severe changes in the material morphology were observed by SEM and AFM due to a variation of the cellulose nanoparticle properties such as the aspect ratio, the crystalline index and the surface charge density. BCF fibers form a 3D network and they are surrounded by the cellulose nanoparticle thin films inducing a significant reduction of the size of the pores in comparison with a neat BCF based aerogel. BET analyses confirm the appearance of a new organization structure with pores of nanometric sizes. As a consequence, a decrease of the thermal conductivities is observed from 28mWm(-1)K(-1) (BCF aerogel) to 23mWm(-1)K(-1) (bio-composite aerogel), which is below the air conductivity (25mWm(-1)K(-1)). This improvement of the insulation properties for composite materials is more pronounced for aerogels based on cellulose nanoparticles having a low crystalline index and high surface charge (NFC-2h). The significant improvement of their insulation properties allows the bio-composite aerogels to enter the super-insulating materials family. The characteristics of cellulose nanoparticles also influence the mechanical properties of the bio-composite aerogels. A significant improvement of the mechanical properties under compression is obtained by self-organization, yielding a multi-scale architecture of the cellulose nanoparticles in the bio-composite aerogels. In this case, the mechanical property is more dependent on the morphology of the composite aerogel rather than the intrinsic characteristics of the cellulose nanoparticles., (Copyright © 2015 Elsevier Ltd. All rights reserved.)