Search

The demand for eco-friendly packaging materials has urged researchers to look for alternatives to petroleum-based polymers. In this regard, paper-based products have turned out to be a promising choice; however, their weak resistance to water has limited their application. The use of various additives to enhance paper's moisture resistance is a common practice. However, considering the growing global agenda for sustainable development, the search for new bio-based paper additives has become increasingly important. This study investigated the potential synergistic impact of the addition of nanofibrillated cellulose (NFC) and chitosan additives (CHIT) to different fiber combinations to improve paper's properties, in particular, their wet strength. The efficacy of the additive application order was examined and was found to be crucial in achieving the desired outcomes. The results showed that incorporating CHIT after NFC enhanced the paper's tensile and burst indicators, as well as the paper stretch in the dry state, by 35–70%, 35–55%, and 20–35%, respectively. In addition, the tensile index and stretch in the wet state improved 9–13 times and 2.5–5.5 times over, respectively. The air permeability decreased 2.5–12 times over. These findings demonstrate that the sequential addition of the NFC and CHIT additives yield a greater enhancement of paper's properties than using each additive separately. [ABSTRACT FROM AUTHOR]

Polycarboxylic acids (PCAs) aroused interest as crosslinking agents for natural polymers, such as cellulose, starch, chitosan, and hemicelluloses (HC), for improving their water resistance and imparting them new properties. Here, PCAs were studied for the crosslinking of HC films. HCs were isolated from gray alder (Alnus incana L.) wood as a water-soluble fraction by sawdust extraction with 7% potassium hydroxide. Citric acid (CA), maleic acid (MA), and butane tetracarboxylic acid (BTCA) served as crosslinking agents in the presence of sodium hypophosphite as a catalyst. The crosslinking reaction was followed by the analysis of free and esterified COOH groups in HC films. At temperatures below 100-110°C, the HC esterification process with BTCA proceeded very slowly. At 140°C, most of the acids' COOH groups reacted with HC during 1-1.5 h. BTCA had a higher esterification activity than CA and MA. The obtained films retained their form on immersing in water and subsequent drying in the open air. The water retention value of films followed the reaction kinetics, that is, decreased with increasing reaction time. Water-resistant films were obtained with no <10-11% of BTCA and 20% of CA based on the weight of HC. The water vapor sorption capacity of the films after modification with 10% BTCA decreased approximately twice in the whole range of the relative humidity of air compared with the case of unmodified HC films. [ABSTRACT FROM AUTHOR]