Search

The effect of separation distance between turbines on overall cluster performance were simulated using computational fluid dynamics software and we found that at a distance equivalent to two rotors, there was an improvement of +8.06% in the average performance of the cluster compared to a single, isolated turbine. A very small improvement in performance was noted at the equivalent distance of 12 rotor diameters. The performances of three individual turbines in pyramid- and inverted pyramid-shaped vertical axis wind turbine clustered farm configurations with varying oblique angles at a fixed spacing of two equivalent rotor diameters were also investigated. The design experiment involves the simulation of test cases with oblique angles from 15° to 165° at an interval of 15° and the turbines were allowed to rotate through 18 full rotations. The results show that the left and right turbines increase in performance as the angle with respect to the streamline axis increases, with the exception of the 165° angle. The center turbine, meanwhile, attained its maximum performance at a 45° oblique angle. The maximum cluster performance was found to be in the configuration where the turbines were oriented in a line (i.e., side by side) and perpendicular to the free-stream wind velocity, exhibiting an overall performance improvement of 9.78% compared to the isolated turbine. Other array configurations show improvements ranging from 6.58% to 9.57% compared to the isolated turbine, except in the extreme cases of 15° and 165°, where a decrease in the cluster performance was noted due to blockage induced by the left and right turbines, and the center turbines, respectively. [ABSTRACT FROM AUTHOR]

In this paper a new model to predict the wake of vertical axis wind turbines (VAWT) is proposed and analysed. The model is based on the actuator disk and the Double Multiple Stream Tube methods. Specifically, the model, denoted as Multiple Actuator Block, is based on the definition, inside the computational domain, of multiple parallelepipedic blocks distributed along the path of the blades. Volumetric momentum sinks are imposed in these blocks to model the effect of the blades on the flow. To analyse the performance of the model a VAWT with three NACA0022, for which numerical and experimental results are available in the literature, has been considered. Different types of simulations with the Multiple Actuator Block model have been carried out and have been compared with a complete finite volume simulation using the sliding mesh technique. This simulation requires about ten times more CPU time than the simulations using the Multiple Actuator Block model. It has been found that the large scale features of the far wake can be reproduced using the Multiple Actuator Block model applying in the block the forces, obtained from the complete finite volume simulation or obtained from a boundary-layer type code, when the blade is inside the block. [ABSTRACT FROM AUTHOR]