Search

Particle image velocimetry (PIV) was used to measure the flow field in the mixing chamber of a mixer settler. An Eulerian-Eulerian approach, standard k-ε turbulence model, and multiple reference frames (MRF) technique were employed to simulate liquid-liquid two-phase flow, turbulent flow, and impeller rotation in the mixer settler, respectively. The effects of impeller type, impeller clearance and baffle configuration on the flow field were analyzed. Results showed that rigid-flexible impeller can spread the impeller energy more uniformly in the mixing chamber and increase the velocity of the continuous phase through the multi-body motion of flexible sheet compared with rigid impeller. The flow numbers of RF-RT, RF-PBT and RF-CBT systems were increased by 46 %, 54 % and 43 %, respectively, compared with RT, PBT and CBT systems. Meanwhile, the suction capacity of impeller was enhanced with a decreased impeller clearance, and the backflow was eliminated by the installation of baffles. [ABSTRACT FROM AUTHOR]

The fractal impeller has fractal structure and self-similarity property. A series of high-speed jet flows can be generated in the flow field due to the existence of the gaps around the fractal impeller blade perimeter, which can break up the trailing vortex into small ones and improve the energy utilization rate. The more the number of fractal iteration, the lower the power consumption of fractal impeller. These conditions are beneficial to improve the solid particles suspension quality in the solid-liquid mixing process. • The hydrodynamics of fractal impeller in solid-liquid mixing process was studied by CFD simulation. • Fractal impeller can improve solid-liquid homogeneous degree. • Fractal impeller can reduce the power consumption. • Solid suspension quality increased with the increase of fractal iteration number of fractal impeller. The hydrodynamics of solid-liquid mixing process in a stirred tank with four pitched-blade impellers, fractal 1 impellers, and fractal 2 impellers were investigated using computational fluid dynamics (CFD) simulation. An Eulerian-Eulerian approach, standard k - ε turbulence model, and multiple reference frames (MRF) technique were employed to simulate the solid-liquid two-phase flow, turbulent flow, and impeller rotation, respectively. The effects of impeller speed, impeller type, impeller spacing, impeller blade tilt angle, impeller blade shape, solid particle size and initial solid particle loading on the solid particle suspension quality were investigated. Results showed that the homogenous degree of solid-liquid system increased with the increase of impeller speed. The impeller spacing of T 5/6 and T and impeller blade tilt angle of 60° and 45° were appropriate for the solid-liquid suspension process. Fractal shape impeller was more efficient than jagged shape impeller in solid-liquid mixing process. Larger particle diameter and higher initial solid particle loading resulted in less homogenous distribution of solid particles. It was found that fractal impeller could improve the solid particle suspension quality compared with four pitched-blade impeller under the same power consumption, increasingly so with the fractal iteration number of fractal impeller. Moreover, fractal impeller reduced the size of impeller trailing vortex and consumed less power consumption compared with four pitched-blade impeller at the same impeller speed, and the more the number of fractal iteration, the higher the impeller energy utilization rate of fractal impeller. [ABSTRACT FROM AUTHOR]

The hydrodynamics of gas-liquid dispersion process in a stirred tank with rigid impellers, rigid-flexible impellers, and punched rigid-flexible impellers were investigated using a combined computational fluid dynamics (CFD) and population balance model (PBM) approach. A classical Eulerian-Eulerian approach coupled with standard k-e turbulence model was employed to simulate gas-liquid turbulent flow in the stirred tank. The multiple reference frame (MRF) approach was used to simulate impeller rotation. The effects of impeller type, flexible connection piece length, aperture size/ratio, impeller speed and superficial gas velocity on the local gas holdup and bubble size distribution for the gas-liquid dispersion process were investigated. Results showed that a long flexible connection piece length was conductive to the gas-liquid dispersion process. The optimum aperture ratio and aperture diameter were 12 % and 8 mm, respectively, for the gas-liquid dispersion process. Punched rigid-flexible impeller could reduce the differential pressure ahead and behind the impeller blade, decrease the size of low-pressure zone, and improve the water shear strain rate compared with rigid impeller and rigid-flexible impeller at the same Pg,v. It was found that punched rigid-flexible impeller was more efficient in terms of gas dispersibility than rigid impeller and rigid-flexible impeller. [ABSTRACT FROM AUTHOR]

Solid suspension characteristics were predicted by computational fluid dynamics (CFD) simulation in a stirred tank driven by a dual rigid-flexible impeller and a dual punched rigid-flexible impeller. An Eulerian-Eulerian approach, standard k-ε turbulence model, and multiple reference frames (MRF) technique were employed to simulate the solid-liquid two-phase flow, turbulent flow, and impeller rotation in the stirred tank, respectively. The CFD results showed that dual punched rigid-flexible impeller could increase the axial velocity and turbulent kinetic energy dissipation rate, and decrease the quantity of sediment solid particles compared with dual rigid-flexible impeller. Less impeller power was consumed by dual punched rigid-flexible impeller compared with dual rigid-flexible impeller at the same impeller speed. It was found that punched rigid-flexible impeller was more efficient in terms of solid suspension quality than dual rigid-flexible impeller at the same Pw. The simulated results for the axial solid concentration were in good agreement with the experimental data. [ABSTRACT FROM AUTHOR]

Computational fluid dynamics (CFD) was used to investigate the hydrodynamics of solid-liquid suspension process in a stirred tank with rigid impellers, rigid-flexible impellers and punched rigid-flexible impellers. The effects of impeller type, impeller speed, flexible connection piece length, impeller spacing, particle size, and aperture size/ratio on the mixing quality were investigated. Results showed that the degree of solid-liquid homogeneity increased with an increase in impeller speed. A long flexible connection piece was conductive to solid particles suspension process. The solid particles could not obtain enough momentum to suspend to the upper region of stirred tank with small impeller spacing. Larger particle size resulted in less homogenous distribution of solid particles. The optimum aperture ratio and aperture diameter of punched rigid-flexible impeller were 12% and 8 mm, respectively, for solid particles suspension process. It was found that punched rigid-flexible impeller was more efficient in suspending solid particles compared with rigid impeller and rigid-flexible impeller at the same power consumption. In addition, less impeller power was consumed by punched rigid-flexible impeller compared with rigid impeller and rigid-flexible impeller at the same impeller speed. [ABSTRACT FROM AUTHOR]

The hydrodynamics of solid-liquid suspension process in a stirred tank with a dual rigid impeller, a dual rigid-flexible impeller, and a dual punched rigid-flexible impeller were investigated using computational fluid dynamics (CFD) simulation. A classical Eulerian-Eulerian approach coupled with standard k - ε turbulence model was employed to simulate solid-liquid turbulent flow in the stirred tank. The multiple reference frame (MRF) approach was used to simulate impeller rotation. The effects of impeller type, impeller speed, flexible connection piece width/length of dual rigid-flexible impeller, aperture size/ratio of dual punched rigid-flexible impeller, particle diameter, and liquid viscosity on the homogeneity degree of solid-liquid system were investigated. Results showed that the homogeneity degree of solid-liquid system increased with an increase in impeller speed. A long and wide flexible connection piece was conductive to solid particles suspension process. Larger particle diameter resulted in less homogenous distribution of solid particles. An increase in liquid viscosity was beneficial to maintain solid particles in suspension state. The optimum aperture ratio and aperture diameter were 12% and 8 mm, respectively, for solid particles suspension process. It was found that dual punched rigid-flexible impeller was more efficient in terms of solid particles suspension quality compared with dual rigid impeller and dual rigid-flexible impeller under the same power consumption. [ABSTRACT FROM AUTHOR]