Search

The prestressed unidirectional carbon fibre reinforced polymer (CFRP) strips are currently often used for flexural strengthening of concrete structures. To ensure reliable strengthening, strips have to be anchored at their ends to the surface. However, anchoring of unidirectional CFRP strips is difficult because of their weak transversal mechanical properties. Although several CFRP strip anchorage approaches have been developed to date, only very few were applied on-site. The paper presents the development of hybrid bonded/bolted anchorages of CFRP strips used in a novel prestressing system. The anchorages are made of thin steel plates, clamped with the high-strength friction grip (HSFG) bolts and epoxy adhesive, to fix the CFRP strips. The paper describes the results of full-scale tests carried out on a series of axial tensile specimens. The developed anchorage has an ultimate tensile strength of about 200 kN, i.e. 70% of the ultra-high CFRP strips' strength, which is sufficient for strengthening purposes. After a series of tests in the laboratory, the anchorages have been implemented on-site and an example is presented in the paper. [ABSTRACT FROM AUTHOR]

CFRP (carbon fiber reinforced polymer) strips are currently often used to strengthen reinforced concrete structures in flexure. In order to ensure effective strengthening, proper connection between FRP material and concrete structure is needed. CFRP strips can be applied passively (only by bonding to the concrete surface) or actively (by prestressing before bonding). In the case of passive strengthening, CFRP strips connecting by bonding to the surface along the strengthened element are usually sufficient. However, active (prestressing) CFRP strips should be additionally anchored at their ends. Anchoring of unidirectional CFRP strips to the reinforced concrete is difficult because of their weak properties in transverse directions. The paper presents a development of mechanical steel anchorages used in an active CFRP flexural strengthening system for reinforced concrete structures. The anchorages were made of steel plates connected to CFRP strips with steel rivets and epoxy adhesive. They were developed within series of tests on specimens from small-scale to full-scale tested in an axial tensile scheme. The paper describes successive modifications of the anchorages as well as the results of full-scale tests. The final version of the anchorage developed during the research had a tensile failure force of 185 kN, which is sufficient value for CFRP strengthening purposes. [ABSTRACT FROM AUTHOR]