Search

Intelligent reflecting surface (IRS) is a newly emerged technology that can increase the energy and spectral efficiency of wireless communication systems. This paper considers an IRS-aided multi-user multiple-input single-output (MISO) communication system, and presents a detailed analysis and optimization framework for the weighted sum-rate (WSR) of the downlink transmission over Rician fading channels. Unlike most of the prior works where the active beamformer at the base station (BS) and passive beamformer at the IRS are jointly designed based on the instantaneous channel state information (CSI), this paper proposes a low-complexity transmission protocol where the IRS passive beamforming and BS power allocation coefficient vector are optimized in the large timescale based on the statistical CSI, and the BS transmit beamforming is designed in the small timescale based on only the instantaneous CSI of the effective BS-user channels. Therefore, the channel training overhead in each channel coherence interval under our proposed protocol is independent of the number of IRS reflecting elements, which is in sharp contrast to most of the prior works. By considering maximum-ratio transmit beamforming at the BS, we derive a lower bound of the ergodic WSR in closed-form. Then, we propose an efficient algorithm to jointly optimize the IRS passive beamforming and BS power allocation coefficient vector for maximizing the ergodic WSR lower bound. Numerical results validate the tightness of our derived WSR bound and show that the proposed scheme outperforms various existing schemes in terms of complexity or capacity performance. [ABSTRACT FROM AUTHOR]

This paper considers device-free sensing in an orthogonal frequency division multiplexing (OFDM) cellular network to enable integrated sensing and communication (ISAC). A novel two-phase sensing framework is proposed to localize the passive targets that cannot transmit/receive reference signals to/from the base stations (BSs), where the ranges of the targets are estimated based on their reflected OFDM signals to the BSs in Phase I, and the location of each target is estimated based on its ranges to different BSs in Phase II. Specifically, in Phase I, we design a model-free range estimation approach by leveraging the OFDM channel estimation technique for determining the delay values of all the two-way BS-target-BS paths, which does not rely on any BS-target channel model. In Phase II, we reveal that ghost targets may be falsely detected in some cases as all the targets reflect the same signals to the BSs, which thus do not know how to match each estimated range with the right target. Interestingly, we show that the above data association issue is not a fundamental limitation for device-free sensing: under the ideal case of perfect range estimation in Phase I, the probability for ghost targets to exist is proved to be negligible when the targets are randomly located. Moreover, under the practical case of imperfect range estimation in Phase I, we propose an efficient algorithm for joint data association and target localization in Phase II. Numerical results show that our proposed two-phase framework can achieve very high accuracy in the localization of passive targets, which increases with the system bandwidth. [ABSTRACT FROM AUTHOR]

Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal propagation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be efficiently integrated into wireless networks, such as reflection optimization, channel estimation, and deployment from communication design perspectives. In this paper, we provide a tutorial overview of IRS-aided wireless communications to address the above issues, and elaborate its reflection and channel models, hardware architecture and practical constraints, as well as various appealing applications in wireless networks. Moreover, we highlight important directions worthy of further investigation in future work. [ABSTRACT FROM AUTHOR]

Intelligent reflecting surface (IRS) is a promising new technology for achieving both spectrum and energy efficient wireless communication systems in the future. However, existing works on IRS mainly consider frequency-flat channels and assume perfect knowledge of channel state information (CSI) at the transmitter. Motivated by the above, in this paper we study an IRS-enhanced orthogonal frequency division multiplexing (OFDM) system under frequency-selective channels and propose a practical transmission protocol with channel estimation. First, to reduce the overhead in channel training as well as exploit the channel spatial correlation, we propose a novel IRS elements grouping method, where each group consists of a set of adjacent IRS elements that share a common reflection coefficient. Based on this method, we propose a practical transmission protocol where only the combined channel of each group needs to be estimated, thus substantially reducing the training overhead. Next, with any given grouping and estimated CSI, we formulate the problem to maximize the achievable rate by jointly optimizing the transmit power allocation and the IRS passive array reflection coefficients. Although the formulated problem is non-convex and thus difficult to solve, we propose an efficient algorithm to obtain a high-quality suboptimal solution for it, by alternately optimizing the power allocation and the passive array coefficients in an iterative manner, along with a customized method for the initialization. Simulation results show that the proposed design significantly improves the OFDM link rate performance as compared to the case without using IRS. Moreover, it is shown that there exists an optimal size for IRS elements grouping which achieves the maximum achievable rate due to the practical trade-off between the training overhead and IRS passive beamforming flexibility. [ABSTRACT FROM AUTHOR]