Search

As in any other industry, nuclear energy results in the accumulation of some waste, which needs to be managed safely and responsibly due to its radiotoxicity. In the case of highly radioactive waste, geological disposal in stable rock is considered a broadly accepted solution. For the evaluation of the long-term safety of a geological repository, the assessment of radionuclide transport needs to be carried out. Radionuclide transport through engineered and natural barriers of the repository will highly depend on the barriers' transport-related properties, which will be determined by coupled thermal, hydraulic, chemical, mechanical, biological, and radiation processes taking place in those barriers. In this study, the thermo-hydro-chemical (THC) state of bentonite was analysed considering CO2 gas diffusion and temperature-dependent solubility in water. Reactive transport modelling of bentonite under non-isothermal conditions was performed with the COMSOL Multiphysics software (v6.0), coupled with the geochemical solver Phreeqc via the iCP interface. The modelling demonstrated that the consideration of chemical processes in bentonite had no significant influence on non-reactive Cl− transport; however, it would be important for other radionuclides whose sorption in porous media depends on the porewater pH. Based on the modelling results, changes in the bentonite mineralogical composition and, subsequently, porosity depend on the partial CO2 pressure at the bentonite–granite boundary. In the case of low CO2 partial pressure at the bentonite–granite interface, the calcite dissolution led to a slight porosity increase, while higher CO2 partial pressure led to decreased porosity near the interface. [ABSTRACT FROM AUTHOR]

The geological disposal of high-level radioactive waste is the final step in the nuclear fuel cycle. It is realized via isolating the high-level radioactive waste in the geological environment with an appropriate system of engineered barriers. Radionuclides-containing materials must be isolated from the biosphere until the radioactivity contained in them has diminished to a safe level. In the case of high-level radioactive waste, it could take hundreds of thousands of years. Within such a long timescale, a number of physical and chemical processes will take part in the geological repository. For the assessment of radionuclide migration from a geological repository, it is necessary to predict the repository's behavior once placed in the host rock as well as the host-rock response to disturbances due to construction. In this study, the analysis of repository barriers (backfill, concrete, inner excavation disturbed zone (EDZ), outer EDZ, host rock) thermo–hydraulic–mechanical (THM) evolution was performed, and the scope of gas-induced desaturation was analyzed with COMSOL Multiphysics. The analysis was based on modelling of a two-phase flow of miscible fluid (water and H2) considering important phenomena such as gas dissolution and diffusion, advective–diffusive transport in the gaseous phase, and mechanical deformations due to thermal expansion of water and porous media. The importance of proper consideration of temperature-dependent thermodynamic properties of water and THM couplings in the analysis of near-field processes was also discussed. The modelling demonstrated that such activities as 50 years' ventilation of the waste disposal tunnel in initially saturated porous media, and such processes as gas generation due to corrosion of waste package or heat load from the waste, also led to desaturation of barriers. H2 gas generation led to the desaturation in engineered barriers and in a part of the EDZ close to the gas generation place vanishing soon after finish of gas generation, while the host rock remained saturated during the gas generation phase (50–100,000 years). Radionuclide transport properties in porous media such as effective diffusivity are highly dependent on the water content in the barriers determined by their porosity and saturation. [ABSTRACT FROM AUTHOR]