Search

Abstract: An experimental and analytical study of nanocatalyst fabrication and the production of hydrogen utilizing photon energy was carried out. The porous structure of the nanocatalyst provides a high surface to volume ratio of the catalytic layer thereby increasing the activity of the catalyst. An experiment was carried out to obtain an effective nanocatalyst by using pulsed laser ablation (PLA) technology. The properties of the nanocatalyst are directly related to the performance of the catalytic reaction and are analyzed. Experiments and analyses were carried out to evaluate the activity enhancement of the nanocatalyst. Photonic energy provides the heat for the endothermic steam–methanol reforming reaction producing hydrogen. It is shown that photonic induced steam–methanol reforming in a nanocatalyst reformer is feasible and promising. [Copyright &y& Elsevier]

Abstract: An experimental and theoretical study of steam reforming of methanol is carried out in a packed-bed microreactor with internal heating. Experimental results of the methanol conversion and carbon monoxide concentration in an internally heated reformer are compared with those of an externally heated reformer. Higher methanol conversion and carbon monoxide concentration are obtained for internal heating at the same conditions. The results show the conversion efficiency of methanol and CO concentration increase with increasing internal heating rate over the range of operating conditions. A correlation for the conversion efficiency of methanol has been obtained as a function of the internal heating rate and a dimensionless time parameter which represents the ratio of the characteristic time of the methanol flow to the time for chemical reaction. [Copyright &y& Elsevier]

• Investigated bubble dynamics in laser induced reaction process of liquid precursor. • Analyzed liquid-vapor phase change to determine the reaction rate from bubble growth. • Obtained the transient triple contact point temperature by experiment and simulation. • Developed a semi-empirical model for reaction rate vs triple contact point temperature. • Validated the transport and reaction model experimentally with an excellent accuracy. Laser assisted low-temperature nano/microfabrication of functional materials on a flexible or rigid substrate using water-based liquid precursor have gained significant attention owing to its high process efficiency and low environment impact. Both of which are essential for the green and low-carbon manufacturing technologies needed for the next generation of electronic devices. Laser induced photo-hydrothermal synthesis (LIPHS) utilizes thermally induced reductive reaction in a liquid precursor to synthesize and deposit nano/micro-patterns on temperature sensitive substrates. During LIPHS, microbubble generation is inevitable as a result of byproduct gas formation and liquid-vapor phase change of the precursor. Transport phenomena of the laser-induced reduction reaction coupled with microbubble dynamics on the liquid-vapor-solid triple contact interface significantly affects the quality of fabricated nano/microstructures. Herein, we investigated microbubble formation and growth on the substrate surface during a LIPHS process for silver on a polyimide substrate surface. Framewise growth of microbubble was captured for different laser powers and solute concentrations to reveal the time dependent bubble diameter variation. It was found that the bubble size and growth rate decreased with increasing solute concentration owing to increased boiling point of the precursor. Bubble temperature and reduction reaction rate were obtained by theoretical analyses on the microbubble growth rate. Transient solid-liquid-vapor triple contact point temperature of the microbubble during the LIPHS process was obtained from a numerical simulation to develop a comprehensive model the first time for predicting the chemical reaction rate. The proposed model was validated experimentally with a relative error of 6.2% at the highest reaction rate. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract: The present study proposes a combination of solar-powered components (two heaters, an evaporator, and a steam reformer) with a proton exchange membrane fuel cell to form a powerplant that converts methanol to electricity. The solar radiation heats up the mass flows of methanol–water mixture and air and sustains the endothermic methanol steam reformer at a sufficient reaction temperature (typically between 220 and 300°C). In order to compare the different types of energy (thermal, chemical, and electrical), an exergetic analysis is applied to the entire system, considering only the useful part of energy that can be converted to work. The effect of the solar radiation intensity and of different operational and geometrical parameters like the total inlet flow rate of methanol–water mixture, the size of the fuel cell, and the cell voltage on the performance of the entire system is investigated. The total exergetic efficiency comparing the electrical power output with the exergy input in form of chemical and solar exergy reaches values of up to 35%, while the exergetic efficiency only accounting for the conversion of chemical fuel to electricity (and neglecting the ‘cost-free’ solar input) is increased up to 59%. At the same time, an electrical power density per irradiated area of more than 920Wm−2 is obtained for a solar heat flux of 1000Wm−2. [Copyright &y& Elsevier]