Search

This study systematically reviews the integration of artificial intelligence (AI) and remote sensing technologies to address the issue of crop water stress caused by rising global temperatures and climate change; in particular, it evaluates the effectiveness of various non-destructive remote sensing platforms (RGB, thermal imaging, and hyperspectral imaging) and AI techniques (machine learning, deep learning, ensemble methods, GAN, and XAI) in monitoring and predicting crop water stress. The analysis focuses on variability in precipitation due to climate change and explores how these technologies can be strategically combined under data-limited conditions to enhance agricultural productivity. Furthermore, this study is expected to contribute to improving sustainable agricultural practices and mitigating the negative impacts of climate change on crop yield and quality.

Seafood mislabeling rates of approximately 20% have been reported globally. Traditional methods for fish species identification, such as DNA analysis and polymerase chain reaction (PCR), are expensive and time-consuming, and require skilled technicians and specialized equipment. The combination of spectroscopy and machine learning presents a promising approach to overcome these challenges. In our study, we took a comprehensive approach by considering a total of 43 different fish species and employing three modes of spectroscopy: fluorescence (Fluor), and reflectance in the visible near-infrared (VNIR) and short-wave near-infrared (SWIR). To achieve higher accuracies, we developed a novel machine-learning framework, where groups of similar fish types were identified and specialized classifiers were trained for each group. The incorporation of global (single artificial intelligence for all species) and dispute classification models created a hierarchical decision process, yielding higher performances. For Fluor, VNIR, and SWIR, accuracies increased from 80%, 75%, and 49% to 83%, 81%, and 58%, respectively. Furthermore, certain species witnessed remarkable performance enhancements of up to 40% in single-mode identification. The fusion of all three spectroscopic modes further boosted the performance of the best single mode, averaged over all species, by 9%. Fish species mislabeling not only poses health-related risks due to contaminants, toxins, and allergens that could be life-threatening, but also gives rise to economic and environmental hazards and loss of nutritional benefits. Our proposed method can detect fish fraud as a real-time alternative to DNA barcoding and other standard methods. The hierarchical system of dispute models proposed in this work is a novel machine-learning tool not limited to this application, and can improve accuracy in any classification problem which contains a large number of classes.

Melamine and its derivative, cyanuric acid, are occasionally added to pet meals because of their nitrogen-rich qualities, leading to the development of several health-related issues. A nondestructive sensing technique that offers effective detection must be developed to address this problem. In conjunction with machine learning and deep learning technique, Fourier transform infrared (FT-IR) spectroscopy was employed in this investigation for the nondestructive quantitative measurement of eight different concentrations of melamine and cyanuric acid added to pet food. The effectiveness of the one-dimensional convolutional neural network (1D CNN) technique was compared with that of partial least squares regression (PLSR), principal component regression (PCR), and a net analyte signal (NAS)-based methodology, called hybrid linear analysis (HLA/GO). The 1D CNN model developed for the FT-IR spectra attained correlation coefficients of 0.995 and 0.994 and root mean square error of prediction values of 0.090% and 0.110% for the prediction datasets on the melamine- and cyanuric acid-contaminated pet food samples, respectively, which were superior to those of the PLSR and PCR models. Therefore, when FT-IR spectroscopy is employed in conjunction with a 1D CNN model, it serves as a potentially rapid and nondestructive method for identifying toxic chemicals added to pet food.

This study is directed towards developing a fast, non-destructive, and easy-to-use handheld multimode spectroscopic system for fish quality assessment. We apply data fusion of visible near infra-red (VIS-NIR) and short wave infra-red (SWIR) reflectance and fluorescence (FL) spectroscopy data features to classify fish from fresh to spoiled condition. Farmed Atlantic and wild coho and chinook salmon and sablefish fillets were measured. Three hundred measurement points on each of four fillets were taken every two days over 14 days for a total of 8400 measurements for each spectral mode. Multiple machine learning techniques including principal component analysis, self-organized maps, linear and quadratic discriminant analyses, k-nearest neighbors, random forest, support vector machine, and linear regression, as well as ensemble and majority voting methods, were used to explore spectroscopy data measured on fillets and to train classification models to predict freshness. Our results show that multi-mode spectroscopy achieves 95% accuracy, improving the accuracies of the FL, VIS-NIR and SWIR single-mode spectroscopies by 26, 10 and 9%, respectively. We conclude that multi-mode spectroscopy and data fusion analysis has the potential to accurately assess freshness and predict shelf life for fish fillets and recommend this study be expanded to a larger number of species in the future.

Strawberry (Fragaria × ananassa Duch) plants are vulnerable to climatic change. The strawberry plants suffer from heat and water stress eventually, and the effects are reflected in the development and yields. In this investigation, potential chlorophyll-fluorescence-based indices were selected to detect the early heat and water stress in strawberry plants. The hyperspectral images were used to capture the fluorescence reflectance in the range of 500 nm–900 nm. From the hyperspectral cube, the region of interest (leaves) was identified, followed by the extraction of eight chlorophyll-fluorescence indices from the region of interest (leaves). These eight chlorophyll-fluorescence indices were analyzed deeply to identify the best indicators for our objective. The indices were used to develop machine-learning models to assess the performance of the indicators by accuracy assessment. The overall procedure is proposed as a new workflow for determining strawberry plants’ early heat and water stress. The proposed workflow suggests that by including all eight indices, the random-forest classifier performs well, with an accuracy of 94%. With this combination of the potential indices, namely the red-edge vegetation stress index (RVSI), chlorophyll B (Chl-b), pigment-specific simple ratio for chlorophyll B (PSSRb), and the red-edge chlorophyll index (CIREDEDGE), the gradient-boosting classifier performs well, with an accuracy of 91%. The proposed workflow works well with a limited number of training samples which is an added advantage.

Ensuring the quality of fresh-cut vegetables is the greatest challenge for the food industry and is equally as important to consumers (and their health). Several investigations have proven the necessity of advanced technology for detecting foreign materials (FMs) in fresh-cut vegetables. In this study, the possibility of using near infrared spectral analysis as a potential technique was investigated to identify various types of FMs in seven common fresh-cut vegetables by selecting important wavebands. Various waveband selection methods, such as the weighted regression coefficient (WRC), variable importance in projection (VIP), sequential feature selection (SFS), successive projection algorithm (SPA), and interval PLS (iPLS), were used to investigate the optimal multispectral wavebands to classify the FMs and vegetables. The application of selected wavebands was further tested using NIR imaging, and the results showed good potentiality by identifying 99 out of 107 FMs. The results indicate the high applicability of the multispectral NIR imaging technique to detect FMs in fresh-cut vegetables for industrial application.

The demand for rapid and nondestructive methods to determine chemical components in food and agricultural products is proliferating due to being beneficial for screening food quality. This research investigates the feasibility of Fourier transform near-infrared (FT-NIR) and Fourier transform infrared spectroscopy (FT-IR) to predict total as well as an individual type of isoflavones and oligosaccharides using intact soybean samples. A partial least square regression method was performed to develop models based on the spectral data of 310 soybean samples, which were synchronized to the reference values evaluated using a conventional assay. Furthermore, the obtained models were tested using soybean varieties not initially involved in the model construction. As a result, the best prediction models of FT-NIR were allowed to predict total isoflavones and oligosaccharides using intact seeds with acceptable performance (R2p: 0.80 and 0.72), which were slightly better than the model obtained based on FT-IR data (R2p: 0.73 and 0.70). The results also demonstrate the possibility of using FT-NIR to predict individual types of evaluated components, denoted by acceptable performance values of prediction model (R2p) of over 0.70. In addition, the result of the testing model proved the model’s performance by obtaining a similar R2 and error to the calibration model.

Contamination inspection is an ongoing concern for food distributors, restaurant owners, caterers, and others who handle food. Food contamination must be prevented, and zero tolerance legal requirements and damage to the reputation of institutions or restaurants can be very costly. This paper introduces a new handheld fluorescence-based imaging system that can rapidly detect, disinfect, and document invisible organic residues and biofilms which may host pathogens. The contamination, sanitization inspection, and disinfection (CSI-D) system uses light at two fluorescence excitation wavelengths, ultraviolet C (UVC) at 275 nm and violet at 405 nm, for the detection of organic residues, including saliva and respiratory droplets. The 275 nm light is also utilized to disinfect pathogens commonly found within the contaminated residues. Efficacy testing of the neutralizing effects of the ultraviolet light was conducted for Aspergillus fumigatus, Streptococcus pneumoniae, and the influenza A virus (a fungus, a bacterium, and a virus, respectively, each commonly found in saliva and respiratory droplets). After the exposure to UVC light from the CSI-D, all three pathogens experienced deactivation (> 99.99%) in under ten seconds. Up to five-log reductions have also been shown within 10 s of UVC irradiation from the CSI-D system.

Panax ginseng has been used as a traditional medicine to strengthen human health for centuries. Over the last decade, significant agronomical progress has been made in the development of elite ginseng cultivars, increasing their production and quality. However, as one of the significant environmental factors, heat stress remains a challenge and poses a significant threat to ginseng plants’ growth and sustainable production. This study was conducted to investigate the phenotype of ginseng leaves under heat stress using hyperspectral imaging (HSI). A visible/near-infrared (Vis/NIR) and short-wave infrared (SWIR) HSI system were used to acquire hyperspectral images for normal and heat stress-exposed plants, showing their susceptibility (Chunpoong) and resistibility (Sunmyoung and Sunil). The acquired hyperspectral images were analyzed using the partial least squares-discriminant analysis (PLS-DA) technique, combining the variable importance in projection and successive projection algorithm methods. The correlation of each group was verified using linear discriminant analysis. The developed models showed 12 bands over 79.2% accuracy in Vis/NIR and 18 bands with over 98.9% accuracy at SWIR in validation data. The constructed beta-coefficient allowed the observation of the key wavebands and peaks linked to the chlorophyll, nitrogen, fatty acid, sugar and protein content regions, which differentiated normal and stressed plants. This result shows that the HSI with the PLS-DA technique significantly differentiated between the heat-stressed susceptibility and resistibility of ginseng plants with high accuracy.

Plant phenomics has been rapidly advancing over the past few years. This advancement is attributed to the increased innovation and availability of new technologies which can enable the high-throughput phenotyping of complex plant traits. The application of artificial intelligence in various domains of science has also grown exponentially in recent years. Notably, the computer vision, machine learning, and deep learning aspects of artificial intelligence have been successfully integrated into non-invasive imaging techniques. This integration is gradually improving the efficiency of data collection and analysis through the application of machine and deep learning for robust image analysis. In addition, artificial intelligence has fostered the development of software and tools applied in field phenotyping for data collection and management. These include open-source devices and tools which are enabling community driven research and data-sharing, thereby availing the large amounts of data required for the accurate study of phenotypes. This paper reviews more than one hundred current state-of-the-art papers concerning AI-applied plant phenotyping published between 2010 and 2020. It provides an overview of current phenotyping technologies and the ongoing integration of artificial intelligence into plant phenotyping. Lastly, the limitations of the current approaches/methods and future directions are discussed.

Methods that combine targeted techniques and chemometrics for analyzing food authenticity can only facilitate the detection of predefined or known adulterants, while unknown adulterants cannot be detected using such methods. Therefore, the non-targeted detection of adulterants in food products is currently in great demand. In this study, FT-IR and FT-NIR spectroscopic techniques were used in combination with non-targeted chemometric approaches, such as one-class partial least squares (OCPLS) and data-driven soft independent modeling of class analogy (DD-SIMCA), to detect adulterants in almond powder adulterated with apricot and peanut powders. The reflectance spectra of 100 pure almond powder samples from two different varieties (50 each) were collected to develop a calibration model based on each spectroscopic technique; each model was then evaluated for four independent sets of two varieties of almond powder samples adulterated with different concentrations of apricot and peanut powders. Classification using both techniques was highly sensitive, the OCPLS approach yielded 90–100% accuracy in different varieties of samples with both spectroscopic techniques, and the DD-SIMCA approach achieved the highest accuracy of 100% when used in combination with FT-IR in all validation sets. Moreover, DD-SIMCA, combined with FT-NIR, achieved a detection accuracy between 91% and 100% for the different validation sets and the misclassified samples belong to the 5% and 7% adulteration sets. These results suggest that spectroscopic techniques, combined with one-class classifiers, can be used effectively in the high-throughput screening of potential adulterants in almond powder.

The grading of ginseng (Panax ginseng) including the evaluation of internal quality attributes is essential in the ginseng industry for quality control. Assessment for inner whitening, a major internal disorder, must be conducted when identifying high quality ginseng. Conventional methods for detecting inner whitening in ginseng root samples use manual inspection, which is time-consuming and inaccurate. This study develops an internal quality measurement technique using near-infrared transmittance spectral imaging to evaluate inner whitening in ginseng samples. Principle component analysis (PCA) was used on ginseng hypercube data to evaluate the developed technique. The transmittance spectra and spectral images of ginseng samples exhibiting inner whitening showed weak intensity characteristics compared to normal ginseng in the region of 900−1050 nm and 1150−1400 nm respectively, owing to the presence of whitish internal tissues that have higher optical density. On the basis of the multivariate analysis method, even a simple waveband ratio image has the great potential to quickly detect inner whitening in ginseng samples, since these ratio images show a significant difference between whitened and non-whitened regions. Therefore, it is possible to develop an efficient and rapid spectral imaging system for the real-time detection of inner whitening in ginseng using minimal spectral wavebands. This novel strategy for the rapid, cost-effective, non-destructive detection of ginseng’s inner quality can be a key component for the automation of ginseng grading.

Rapid and reliable inspection of food is essential to ensure food safety, particularly in mass production and processing environments. Many studies have focused on spectral imaging for poultry inspection; however, no research has explored the use of multispectral fluorescence imaging (MFI) for on-line poultry inspection. In this study, the feasibility of MFI for on-line detection of fecal matter from the ceca, colon, duodenum, and small intestine of poultry carcasses was investigated for the first time. A multispectral line-scan fluorescence imaging system was integrated with a commercial poultry conveying system, and the images of chicken carcasses with fecal contaminants were scanned at processing line speeds of one, three, and five birds per second. To develop an optimal detection and classification algorithm to distinguish upper and lower feces-contaminated parts from skin, the principal component analysis (PCA) and partial least square discriminant analysis (PLS-DA) were first performed using the spectral data of the selected regions, and then applied in spatial domain to visualize the feces-contaminated area based on binary images. Our results demonstrated that for the spectral data analysis, both the PCA and PLS-DA can distinguish the high and low feces-contaminated area from normal skin; however, the PCA analysis based on selected band ratio images (F630 nm/F600 nm) exhibited better visualization and discrimination of feces-contaminated area, compared with the PLS-DA-based developed chemical images. A color image analysis using histogram equalization, sharpening, median filter, and threshold value (1) demonstrated 78% accuracy. Thus, the MFI system can be developed utilizing the two band ratios for on-line implementation for the effective detection of fecal contamination on chicken carcasses.

Viability is an important quality factor influencing seed germination and crop yield. Current seed-viability testing methods rely on conventional manual inspections, which use destructive, labor-intensive and time-consuming measurements. The aim of this study is to distinguish between viable and nonviable soybean seeds, using a near-infrared (NIR) hyperspectral imaging (HSI) technique in a rapid and nondestructive manner. The data extracted from the NIR–HSI of viable and nonviable soybean seeds were analyzed using a partial least-squares discrimination analysis (PLS-DA) technique for classifying the viable and nonviable soybean seeds. Variable importance in projection (VIP) was used as a waveband selection method to develop a multispectral imaging model. Initially, the spectral profile of each pixel in the soybean seed images was subjected to PLS-DA analysis, which yielded a reasonable classification accuracy; however, the pixel-based classification method was not successful for high accuracy detection for nonviable seeds. Another viability detection method was then investigated: a kernel image threshold method with an optimum-detection-rate strategy. The kernel-based classification of seeds showed over 95% accuracy even when using only seven optimal wavebands selected through VIP. The results show that the proposed multispectral NIR imaging method is an effective and accurate nondestructive technique for the discrimination of soybean seed viability.