Search

A one-pot soft-templating method is reported to fabricate nanosized bimetallic PdAg hollow mesoporous nanospheres (HMSs) for electrocatalytic ethanol oxidation reaction (EOR). The synthesis relies on the "dual-template" surfactant of dioctadecyldimethylammonium chloride that drives in situ growth of mesoporous frameworks on the surface of vesicles into the HMSs with radially opened mesochannels. The synthetic protocol is extendable to engineer elemental compositions and hierarchical nanostructures of PdAg nanoalloys. This system thus provides a direct yet solid platform to understand catalytic add-in synergies of PdAg HMSs toward electrochemical EOR. By evaluating compositional and structural features separately, bimetallic Pd65Ag35 HMSs display the highest EOR activity with a mass activity of 4.61 A mgPd-1. Mechanism studies indicate that synergistically electronic and bifunctional effects as well as structural advantages of Pd65Ag35 HMSs kinetically optimize the removal of poisoning carbonaceous intermediates and accelerate the diffusion processes (the rate-determining step), and thus promote the EOR performance accordingly.

Rational design and synthesis of highly efficient nanocatalysts towards electrochemical ethanol oxidation reaction (EOR) are of great importance for practical applications in direct ethanol fuel cells. Nanoengineering the nanostructures and compositions of EOR electrocatalysts has been of significnat interest because these paratmeters can enhance electrocatalytic kinetics and performance in the EOR. This article reports a synergistic EOR catalyst with remarkably enhanced electrochemical performance based on 3-nm-thick bimetallic PdAg single-crystalline nanowires. Kinetically stable yet thermodynamically unfavorable ultrathin PdAg single-crystalline nanowires (sNWs) are epitaxially grown in situ along nanoconfined hexagonal mesophases directly self-assembled by amphiphilic surfactants of dioctadecyldimethylammonium chloride under optimal synthetic condtions in aqueous solution. Due to the ultrathin and ultralong nanostructure, single-crystalline feature with a high density of low-coordinate atomic steps, high Pd utilization efficiency, and incorporation of more oxophilic Ag with Pd, PdAg sNWs show enhanced mass activity of 2.84 A mgPd−1 and stability (retained 43% after 2500 cycles) in the EOR. The kinetic studies reveal that significant enhancement in EOR performance can be ascribed to the synergic electronic and bifunctional effects of ultrathin PdAg sNWs.

Introduction Bile acids, such as chenodeoxycholic acid, play an important role in digestion but are also involved in intestinal motility, fluid homeostasis, and humoral activity. Colonic delivery of sodium chenodeoxycholate (CDC) has demonstrated clinical efficacy in treating irritable bowel syndrome with constipation but was associated with a high frequency of abdominal pain. We hypothesized that these adverse effects were triggered by local super-physiological CDC levels caused by an unfavorable pharmacokinetic profile of the delayed release formulation. Methods We developed novel release matrix systems based on hydroxypropyl methylcellulose (HPMC) for sustained release of CDC. These included standard HPMC formulations as well as bi-layered formulations to account for potential delivery failures due to low colonic fluid in constipated patients. We evaluated CDC release profiles in silico (pharmacokinetic modeling), in vitro and in vivo in swine (pharmacokinetics, rectal manometry). Results For the delayed release formulation in vitro release studies demonstrated pH triggered dose dumping which was associated with giant colonic contractions in vivo. Release from the bi-layered HPMC systems provided controlled release of CDC while minimizing the frequency of giant contractions and providing enhanced exposure as compared to standard HPMC formulations in vivo. Discussion Bi-phasic CDC release could help treat constipation while mitigating abdominal pain observed in previous clinical trials. Further studies are necessary to demonstrate the therapeutic potential of these systems in humans.

Epithelial tissues line the organs of the body, providing an initial protective barrier as well as a surface for nutrient and drug absorption. Here we identified enzymatic components present in the gastrointestinal epithelium that can serve as selective means for tissue-directed polymerization. We focused on the small intestine, given its role in drug and nutrient absorption, and identified catalase as an essential enzyme with the potential to catalyze polymerization and growth of synthetic biomaterial layers. We demonstrated that the polymerization of dopamine by catalase yields strong tissue adhesion. We characterized the mechanism and specificity of the polymerization in segments of the gastrointestinal tracts of pigs and humans ex vivo. Moreover, we demonstrated proof-of-concept for application of these gastrointestinal synthetic epithelial linings (GSELs) for drug delivery, enzymatic immobilization for digestive supplementation, and nutritional modulation through transient barrier formation in pigs. This catalase-based approach to in situ biomaterial generation may have broad indications for gastrointestinal applications.

We report polymer-promoted cooperative catalysis of Cu for oxygen activation. A series of random copolymers containing dipicolylamine as binding motifs are designed to coordinate type-3 Cu sites. The Cu-copolymers show a 6–8-fold activity enhancement, compared to the molecular complex of Cu with an identical coordination site. Michaelis–Menten analysis demonstrates that the kinetic enhancement results from flexible polymer-promoted cooperative catalysis among multi-Cu sites despite the imposed thermodynamic barrier. These observations provide guidance for the bioinspired design of metallopolymers as soluble catalysts with high activity.

Au is one of the most promising electrocatalysts to convert CO2 into CO in an aqueous-phase electrochemical reduction. However, ultrasmall Au nanocatalysts (AuNCs

The rational design of the Au–support electronic interaction is crucial for Au nanocatalysis. We herein report our observation of electronic perturbation at the Au–carbon interface and its application in controlling the reaction selectivity in styrene oxidation. Ultrasmall Au nanocatalysts were grown in situ on a nitrided carbon support where the nitrogen-doped carbon supports enriched the surface charge density and generated electron-rich Au surface sites. The Au–carbon interaction altered the binding behavior of C═C bonds to catalytic centers, leading to a solvent-polarity-dependent selectivity in C═C oxidation reactions. A high selectivity of 90% to benzaldehyde was achieved in an apolar solvent, and a selectivity of 95% to styrene epoxide was attained in a polar solvent. The Au–carbon electronic perturbation, originating from surface functional groups on the carbon support, may provide an alternative avenue to tune the selectivity and activity of more complex reactions in heterogeneous catalysis.

The aggressive primary brain tumor glioblastoma (GBM) is characterized by aberrant metabolism that fuels its malignant phenotype. Diverse genetic subtypes of malignant glioma are sensitive to selective inhibition of the NAD+ salvage pathway enzyme nicotinamide phosphoribosyltransferase (NAMPT). However, the potential impact of NAD+ depletion on the brain tumor microenvironment has not been elaborated. In addition, systemic toxicity of NAMPT inhibition remains a significant concern. Here we show that microparticle-mediated intratumoral delivery of NAMPT inhibitor GMX1778 induces specific immunologic changes in the tumor microenvironment of murine GBM, characterized by upregulation of immune checkpoint PD-L1, recruitment of CD3+, CD4+, and CD8+ T cells, and reduction of M2-polarized immunosuppressive macrophages. NAD+ depletion and autophagy induced by NAMPT inhibitors mediated the upregulation of PD-L1 transcripts and cell surface protein levels in GBM cells. NAMPT inhibitor modulation of the tumor immune microenvironment was therefore combined with PD-1 checkpoint blockade in vivo, significantly increasing the survival of GBM-bearing animals. Thus, the therapeutic impacts of NAMPT inhibition extended beyond neoplastic cells, shaping surrounding immune effectors. Microparticle delivery and release of NAMPT inhibitor at the tumor site offers a safe and robust means to alter an immune tumor microenvironment that could potentiate checkpoint immunotherapy for glioblastoma. SIGNIFICANCE: Microparticle-mediated local inhibition of NAMPT modulates the tumor immune microenvironment and acts cooperatively with anti-PD-1 checkpoint blockade, offering a combination immunotherapy strategy for the treatment of GBM.

A general synthetic methodology is reported to grow ultrafine cobalt-based nanoparticles (NPs, 2–7 nm) within high-surface-area mesoporous carbon (MC) frameworks. Our design strategy is based on colloidal amphiphile (CAM) templated oxidative self-polymerization of dopamine. The CAM templates consisting of a hydrophobic silica-like core and a hydrophilic PEO shell can coassemble with dopamine and template its self-polymerization to form polydopamine (PDA) nanospheres. Given that PDA has rich binding sites such as catechol and amine to coordinate metal ions (e.g., Co2+), PDA nanospheres containing Co2+ ions can be converted into hierarchical porous carbon frameworks containing ultrafine metallic Co NPs (Co@MC) using high-temperature pyrolysis. The CAM templates offer strong “nanoconfinements” to prevent the overgrowth of Co NPs within carbon frameworks. The yielded ultrafine Co NPs have an average size of

New synthetic methods capable of controlling structural and compositional complexities of asymmetric nanoparticles (NPs) are very challenging but highly desired. A simple and general synthetic approach to designing sophisticated asymmetric NPs by anisotropically patterning the surface of isotropic metallic NPs with amphiphilic block copolymers (BCPs) is reported. The selective galvanic replacement and seed-mediated growth of a second metal can be achieved on the exposed surface of metal NPs, resulting in the formation of nanobowls and Janus-type metal-metal dimers, respectively. Using Ag and Au NPs tethered with amphiphilic block copolymers of poly(ethylene oxide)-block-polystyrene (PEO-b-PS), anisotropic surface patterning of metallic NPs (e.g., Ag and Au) is shown to be driven by thermodynamical phase segregation of BCP ligands on isotropic metal NPs. Two proof-of-concept experiments are given on, i) synthesis of Au nanobowls by a selective galvanic replacement reaction on Janus-type patched Ag/polymer NPs; and ii) preparation of Au-Pd heterodimers and Au-Au homodimers by a seed-mediated growth on Janus-type patched Au/polymer NPs. The method shows remarkable versatility; and it can be easily handled in aqueous solution. This synthetic strategy stands out as the new methodology to design and synthesis asymmetric metal NPs with sophisticated topologies.