Search

CH-hydrogen bonding provides access to new building blocks for making macrocyclic ionophores with high degrees of preorganization and selective anion recognition. In this study, an anion-binding ionophore in the shape of a clamshell (ClS) was employed that is composed of two cyanostar (CNstar) macrocycles with preorganized cavities linked with a 12-carbon chain. This ionophore allows for anion complexation by CH-hydrogen bonding. The potentiometric performance of membrane-based ion-selective electrodes incorporating this ionophore was evaluated. Different membrane compositions were prepared to determine the optimum concentrations of the ionophore and lipophilic additive in the membrane. The optimized electrode had a slope of -58.2 mV/decade and demonstrated an anti-Hofmeister selectivity pattern toward iodide with a nanomolar detection limit. Electrospray ionization mass spectrometry was employed to study the relative association strengths of ClS with various anions. The observed mass peaks of the ion-ionophore complexes were found to be consistent with the potentiometric selectivity pattern of the corresponding electrodes. Overall, the selectivity of the electrode could be altered by using an ionophore in which the two CNstar macrocycles are linked together with a flexible 12-carbon chain to control the molecularity of the binding event.

Ultra-bright fluorescent nanoparticles (NPs) hold great promise for demanding bioimaging applications. Recently, extremely bright molecular crystals of cationic fluorophores were obtained by hierarchical co-assembly with cyanostar anion-receptor complexes of associated counterions. These small-molecule ionic isolation lattices (SMILES) ensure spatial and electronic isolation to prohibit dye aggregation quenching. We report a simple, one-step supramolecular approach to formulate SMILES materials into NPs. Rhodamine-based SMILES NPs stabilized by glycol amphiphiles show high fluorescence quantum yield (30%) and brightness per volume (5000 M -1 cm -1 / nm 3 ) with 400 dyes packed into 16-nm particles, corresponding to a particle absorption coefficient of 4 × 10 7 M -1 cm -1 . UV excitation of the cyanostar component leads to highest brightness (>6000 M -1 cm -1 / nm 3 ) by energy transfer to rhodamine emitters. Coated NPs stain cells and are thus promising for bioimaging.

The selectivities and driving forces governing phosphate recognition by charged receptors at prevalent aqueous interfaces is unexplored relative to the many studies in homogeneous solutions. Here w...

Bimetallic magnesium(II) complexes are gaining significant interest in catalysis, yet their fundamental formation and behavior in organic media remain surprisingly unexplored relative to other divalent cations. To understand key principles of their formation, we investigate symmetric ditopic ligands bearing a phenolic backbone and characterize their ability to form dinuclear magnesium(II) cascade complexes with two bridging anions. High-fidelity production of bimetallic magnesium complexes relative to the monometallic complexes is indicative of positive cooperativity. Binding and recognition of analytes or substrates is a key characteristic of metal cascade complexes and relies on anion exchange, but this is also rarely studied with bimetallic magnesium complexes. Investigations with acetate, phosphate, and pyrophosphate reveal exchange of bridging nitrates using the bis-dipicolylamine complex. Rare seven-coordinate magnesium centers are found for the ester complex. The findings in this study provide formative steps to establish design principles for future generations of bimetallic magnesium(II) complexes.

Sequence-controlled supramolecular polymers offer new design paradigms for generating stimuli-responsive macromolecules with enhanced functionalities. The dynamic character of supramolecular links present challenges to sequence definition in extended supramolecular macromolecules, and design principles remain nascent. Here, we demonstrate the first example of using stoichiometry-control to specify the monomer sequence in a linear supramolecular polymer by synthesizing both a homopolymer and an alternating copolymer from the same glycol-substituted cyanostar macrocycle and phenylene-linked diphosphate monomers. A 2:1 stoichiometry between macrocycle and diphosphate produces a supramolecular homopolymer of general formula (A)n comprised of repeating units of cyanostar-stabilized phosphate-phosphate dimers. Using a 1:1 stoichiometry, an alternating (AB)n structure is produced with half the phosphate dimers now stabilized by the additional counter cations that emerge hierarchically after forming the stronger cyanostar-stabilized phosphate dimers. These new polymer materials and binding motifs are sufficient to bear normal and shear stress to promote significant and tunable adhesive properties. The homopolymer (A)n, consisting of cyanostar-stabilized anti-electrostatic linkages, shows adhesion strength comparable to commercial superglue formulations based on polycyanoacrylate but is thermally reversible. Unexpectedly, and despite including traditional ionic linkages, the alternating copolymer (AB)n shows weaker adhesion strength more similar to commercial white glue based on poly(vinyl acetate). Thus, the adhesion properties can be tuned over a wide range by simply controlling the stoichiometric ratio of monomers. This study offers new insight into supramolecular polymers composed of custom-designed anion and receptor monomers and demonstrates the utility of emerging functional materials based on anion-anion linkages.

Based on Coulomb's Law alone, electrostatic repulsion between two anions is expected to prevent their dimerization. Contrary to that idea, this Tutorial Review will present evidence showing that anion-anion dimers of protic hydroxyanions can form readily, and describe conditions that facilitate their formation. From X-ray crystal structures, we learn that hydroxyanions dimerize and oligomerize by overcoming long-range electrostatic opposition. Common examples are hydroxyanions of phosphate, sulfate, and carbonate, often in partnership with charged and neutral receptors. Short-range hydrogen bonds between anionic donors and acceptors are defined as anti-electrostatic hydrogen bonds (AEHBs) with insight from theoretical studies. While anion dimers are difficult to identify unequivocally in solution, these solution dimers have recently been definitively identified. The development of the supramolecular chemistry of anion-anion dimers has led to applications in hierarchical assemblies, such as supramolecular polymers and hydrogen bonded organic frameworks.

Persistent anion binding in a wide range of solution environments is a key challenge that continues to motivate and demand new strategies in synthetic receptor design. Though strong binding in low-polarity solvents has become routine, our ability to maintain high affinities in high-polarity solvents has not yet reached the standard set by nature. Anions are bound and transported regularly in aqueous environments by proteins that use secondary and tertiary structure to isolate anion binding sites from water. Inspired by this principle of solvent exclusion, we created a sequence-defined foldameric capsule whose global minimum conformation displays a helical folded state and is preorganized for 1:1 anion complexation. The high stability of the folded geometry and its ability to exclude solvent were supported by solid-state and solution phase studies. This capsule then withstood a 4-fold increase in solvent dielectric constant (er) from dichloromethane (9) to acetonitrile (36) while maintaining a high and solvent-independent affinity of 105 M-1; ΔG ∼ 28 kJ mol-1. This behavior is unusual. More typical of solvent-dependent behavior, Cl- affinities were seen to plummet in control compounds, such as aryl-triazole macrocycles and pentads, with their solvent-exposed binding cavities susceptible to dielectric screening. Finally, dimethyl sulfoxide denatures the foldamer by putative solvent binding, which then lowers the foldamer's Cl- affinity to normal levels. The design of this capsule demonstrates a new prototype for the development of potent receptors that can operate in polar solvents and has the potential to help manage hydrophilic anions present in the hydrosphere and biosphere.

International audience; The recognition of substituted phosphates underpins many processes including DNA binding, enantioselective catalysis, and recently template-directed rotaxane synthesis. Beyond ATP and a few commercial substrates, however, little is known about how substituents effect organophosphate recognition. Here, we examined alcohol substituents and their impact on recognition by cyanostar macrocycles. The organophosphates were disubstituted by alcohols of various chain lengths, dipropanol, dihexanol, and didecanol phosphate, each accessed using modular solid-phases syntheses. Based on the known size-selective binding of phosphates by π-stacked dimers of cyanostars, threaded [3]pseudorotaxanes were anticipated. While seen with butyl substituents, pseudorotaxane formation was disrupted by competitive OH···O– hydrogen bonding between both terminal hydroxyls and the anionic phosphate unit. Crystallography also showed formation of a backfolded propanol conformation resulting in an 8-membered ring and a perched cyanostar assembly. Motivated by established entropic penalties accompanying ring formation, we reinstated [3]pseudorotaxanes by extending the size of the substituent to hexanol and decanol. Chain entropy overcomes the enthalpically favored OH···O– contacts to favor random-coil conformations required for seamless, high-fidelity threading of dihexanol and didecanol phosphates inside cyanostars. These studies highlight how chain length and functional groups on phosphate’s substituents can be powerful design tools to regulate binding and control assembly formation during phosphate recognition.

There is a critical need for receptors that are designed to enhance anion binding selectivity at aqueous interfaces in light of the growing importance of separation technologies for environmental sustainability. Here, we conducted the first study of anion binding selectivity across a series of prevalent inorganic oxoanions and halides that bind to a positively charged guanidinium receptor anchored to an aqueous interface. Vibrational sum frequency generation spectroscopy and infrared reflection absorption spectroscopy studies at the water-air interface reveal that the guanidinium receptor binds to an oxoanion series in the order SO42- > H2PO4- > NO3- > NO2- while harboring very weak interactions with the halides in the order I- > Cl- ≈ Br-. In spite of large dehydration penalties for sulfate and phosphate, the more weakly hydrated guanidinium receptor was selective for these oxoanions in contradiction to predictions made from ion partitioning alone, like the Hofmeister series and Collins's rules. Instead, sulfate binding is likely favored by the suppression of dielectric screening at the interface that consequently boosts Coulombic attractions, and thus helps offset the costs of anion dehydration. Geometric factors also favor the oxoanions. Furthermore, the unique placement of iodide in our halide series ahead of the stronger hydrogen-bond acceptors (Cl-, Br-) suggests that the binding interaction also depends upon single-ion surface partitioning from bulk water to the interface. Knowledge of the anion binding preferences displayed by a guanidinium receptor sheds light on the receptor architectures needed within designer interfaces to control selectivity.

Summary Fluorescence is critical to applications in optical materials including OLEDs and photonics. While fluorescent dyes are potential key components of these materials, electronic coupling between them in the solid state quenches their emission, preventing their reliable translation to applications. We report a universal solution to this long-standing problem with the discovery of a class of materials called small-molecule ionic isolation lattices (SMILES). SMILES perfectly transfer the optical properties of dyes to solids, are simple to make by mixing cationic dyes with anion-binding cyanostar macrocycles, and work with major classes of commercial dyes, including xanthenes, oxazines, styryls, cyanines, and trianguleniums. Dyes are decoupled spatially and electronically in the lattice by using cyanostar with its wide band gap. Toward applications, SMILES crystals have the highest known brightness per volume and solve concentration quenching to impart fluorescence to commercial polymers. SMILES materials enable predictable fluorophore crystallization to fulfill the promise of optical materials by design.

Fluorophores are powerful tools for the study of chemistry, biology, and physics. However, fluorescence is severely impaired when concentrations climb above 5 μM as a result of effects like self-absorption and chromatic shifts in the emitted light. Herein, we report the creation of a charge-transfer (CT) fluorophore and the discovery that its emission color seen at low concentrations is unchanged even at 5 mM, some 3 orders of magnitude beyond typical limits. The fluorophore is composed of a triphenylamine-substituted cyanostar macrocycle, and it exhibits a remarkable Stokes shift of 15 000 cm

Allosteric regulation of protein structure and function is a hallmark of biology. The structures of protein-like abiological foldamers have been subject to allosteric control, however, regulation of their function is rare. We report this behavior using a photoactive foldamer following the discovery that small and large anions select between single and double helical structures, respectively. Correspondingly, these anions activate different functions in the photofoldamer; small anions turn on photoregulation of anion concentrations while large anions turn on chiroptical switching of quaternary structure. For this demonstration, we used an aryl-triazole based photofoldamer in which the light-driven trans–cis isomerization of azobenzenes alters intrastrand π–π contacts while the triazoles define the allosteric anion-binding site. Binding to 11 anions of increasing size was quantified (Cl–, Br–, NO2–, I–, NO3–, SCN–, BF4–, ClO4–, ReO4–, PF6–, SbF6–). Contrary to expectations that single helices will expand to...

The primary sequence in biopolymers carries the information to direct folded secondary structures, to modulate their stabilities, and to control the resultant functions. Our ability to encode such information into nonbiological oligomers and polymers, however, is still limited. Here, we describe a C

Due to the growing world population, there is an ever-increasing need to develop better receptors to recover and recycle phosphate for use in agricultural processes. This need is driven by agricultural demand and environmental concerns because phosphate eutrophication has a damaging effect on fresh water supplies by fueling algal blooms. The air/water interface provides a unique region with a dielectric constant (e) that diminishes from high in bulk water (e = 80) to significantly lower (e.g., e < 40) near the monolayer surface to potentially enhance affinities during molecular recognition. The work presented here uses a model system of phosphate binding to an amino acid, arginine, and utilizes the interfacial properties of the phospholipid monolayer, 1,2-dipalmitoyl-sn-glycero-3-phosphatidic acid, as the phosphate source to quantify binding. Employing arginine as a probe molecule allows for the evaluation of its guanidinium moiety for phosphate chelation. Surface pressure–area isotherms from Langmuir mon...

The importance of phosphate in biology and chemistry has long motivated investigation of its recognition. Despite this interest, phosphate's facile oligomerization is only now being examined following the discovery of complexes of anion–anion dimers of hydroxyanions. Here we address how oligomerization dictates phosphate's recognition properties when engaged with planar cyanostar macrocycles that can also oligomerize by stacking. The crystal structure of cyanostar with phosphate shows an unprecedented tetrameric stack of cyanostar macrocycles threaded by a phosphate trimer, [H2PO4⋯H2PO4⋯H2PO4]3−. The solution behaviour, studied as a function of solvent quality, highlights how dimers and trimers of phosphate drive formation of higher order stacks of cyanostar into dimer, trimer and tetramer co-assemblies. Solution behaviors differ significantly from simpler complexes of bisulfate hydroxyanion dimers. Phosphate oligomerization is: (1) preferred over ion pairing with tetrabutylammonium cations, (2) inhibits disassembly of the complexes upon dilution, and (3) resists interference from competitive anion solvation. The phosphate oligomers also appear critical for stability; complexation of just one phosphate with cyanostars is unfavored. The cyanostar's ability to self-assemble is found to create a tubular, highly electropositive cavity that complements the size and shape of the phosphate oligomers as well as their higher charge. When given the opportunity, phosphate will cooperate with the receptor to form co-assembled architectures.

Amphiphilic alkoxybenzonitriles (ABNs) of varying chain length are studied at the solution/graphite interface to analyze dynamics of assembly. Competitive self-assembly between ABNs and alkanoic acid solvent is shown by scanning tunneling microscopy (STM) to be controlled by concentration and molecular size. Molecular dynamics (MD) simulations reveal key roles of the sub-nanosecond fundamental steps of desorption, adsorption, and on-surface motion. We discovered asymmetry in desorption-adsorption steps. Desorption starting from alkyl chain detachment from the surface is favored due to dynamic occlusion by neighbouring chains. Even though the nitrile head has a strong solvent affinity, it more frequently re-adsorbs following a detachment event.

The acid-base switching of complexes formed from anti-electrostatic anion-anion homodimers of organophosphates and cyanostar macrocycles was investigated for the first time. High-fidelity 2:2 complexes were selected by using suitably sized organo substituents. Reversible and direct switching occurs with triflic acid and hydroxide base. An unexpected acid⋅⋅⋅anion heterodimer was discovered with weaker picric acid, which helped reveal some of the elementary steps. Switching can also proceed in a cooperative (strong anion then weak acid) or stepwise manner (weak acid then strong anion).

Summary A fundamental understanding of anion binding by receptors is essential for managing salts during energy, water, and food production. However, the limited understanding of solvent effects in ion recognition leads to a persistent blind spot that prevents effective receptor design. We experimentally discovered an underlying 1/ ɛ r dependence of anion affinity on solvent dielectric constant ( ɛ r ). We found this relationship by measuring how chloride binds to macrocyclic triazolophane receptors across a wide range of solvents: ɛ r = 4.7–56.2. Solvent weakens affinity by screening electrostatics; electrostatics dominates when ɛ r ɛ r – affinity in solvents used in liquid-liquid extractions in the nuclear fuel cycle. This model offers a general foundation for anion recognition and electrostatically driven complexation.

Amines are ubiquitous in the chemical industry and are present in a wide range of biological processes, motivating the development of amine-sensitive sensors. There are many turn-on amine sensors, however there are no examples of turn-on sensors that utilize the amine's ability to react by single electron transfer (SET). We investigated a new turn-on amine probe with a 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) fluorophore. BODIPY fluorescence is first preprogrammed into an off state by internal photoinduced electron transfer (PET) to an electron-deficient quinolinium ring, resulting in fluorescence quenching. At low concentrations of aliphatic amine (0 to 10 mM), this PET pathway is shut down by external SET from the amine to the photoexcited charge-transfer state of the probe and the fluorescence is turned on. At high concentrations of amine (50 mM to 1 M), we observed collisional quenching of the BODIPY fluorescence. The probe is selective for aliphatic amines over aromatic amines, and aliphatic thiols or alcohols. The three molecular processes modulate the BODIPY fluorescence in a multi-mechanistic way with two of them producing a direct response to amine concentrations. The totality of the three molecular processes produced the first example of a multi-state and dose-responsive amine sensor.

Fluorescence is critical to many advanced materials including OLEDs and bioimaging. While molecular fluorophores that show bright emission in solution are potential sources of these materials, their emission is frequently lost in the solid state preventing their direct translation to optical applications. Unpredictable packing and coupling of dyes leads to uncontrolled spectral shifts and quenched emission. No universal solution has been found since Perkin made the first synthetic dye 150 years ago. We report the serendipitous discovery of a new type of material that we call small-molecule ionic isolation lattices(SMILES) tackling this long-standing problem. SMILES are easily prepared by adding two equivalents of the anion receptor cyanostar to cationic dyes binding the counter anions and inducing alternating packing of dyes and cyanostar-anion complexes. SMILES materials reinstate solution-like spectral properties and bright fluorescence to thin films and crystals. These positive outcomes derive from the cyanostar. Its wide 3.45-eV band gap allows the HOMO and LUMO levels of the dye to nest inside those of the complex as verified by electrochemistry. This feature simultaneously enables spatial and electronic isolation to decouple the fluorophores from each other and from the cyanostar-anion lattice. Representative dyes from major families of fluorophores, viz, xanthenes, oxazines, styryls, cyanines, and trianguleniums, all crystalize in the characteristic structure and regain their attractive fluorescence. SMILES crystals of rhodamine and cyanine display unsurpassed brightness per volume pointing to uses in demanding applications such as bioimaging. SMILES materials enable predictable fluorophore crystallization to fulfil the promise of optical materials by design.

Anfinsen’s dogma that sequence dictates structure is fundamental to understanding the activity and assembly of proteins. This idea has been applied to all manner of oligomers but not to the behavior of cyclic oligomers, aka macrocycles. We do this here by providing the first proofs that sequence controls the hierarchical assembly of nonbiological macrocycles, in this case, at graphite surfaces. To design macrocycles with one (AAA), two (AAB), or three (ABC) different carbazole units, we needed to subvert the synthetic preferences for one-pot macrocyclizations. We developed a new stepwise synthesis with sequence-defined targets made in 11, 17, and 22 steps with 25, 10, and 5% yields, respectively. The linear build up of primary sequence (1°) also enabled a thermal Huisgen cycloaddition to proceed regioselectively for the first time using geometric control. The resulting macrocycles are planar (2° structure) and form H-bonded dimers (3°) at surfaces. Primary sequences encoded into the suite of tricarb macrocycles were shown by scanning-tunneling microscopy (STM) to impact the next levels of supramolecular ordering (4°) and 2D crystalline polymorphs (5°) at solution-graphite interfaces. STM imaging of an AAB macrocycle revealed the formation of a new gap phase that was inaccessible using only C(3)-symmetric macrocycles. STM imaging of two additional sequence-controlled macrocycles (AAD, ABE) allowed us to identify the factors driving the formation of this new polymorph. This demonstration of how sequence controls the hierarchical patterning of macrocycles raises the importance of stepwise syntheses relative to one-pot macrocyclizations to offer new approaches for greater understanding and control of hierarchical assembly.

Phosphate remediation is important for preventing eutrophication in fresh waters and maintaining water quality. One approach for phosphate removal involves the utilization of molecular receptors. However, our understanding of anion recognition in aqueous solution and at aqueous interfaces is underdeveloped, and the rational design of surface-immobilized receptors is still largely unexplored. Herein, we evaluated the driving forces controlling phosphate binding to elementary amphiphilic receptors anchored at air-water interfaces. We designed biologically inspired receptors with neutral thiourea, positively charged guanidinium, and thiouronium units that all formed Langmuir monolayers. Phosphate binding was quantitatively examined using surface pressure-area isotherms and infrared reflection-absorption spectroscopy (IRRAS). The receptors within this homologous series differ in functional group, charge, and number of alkyl chains to help distinguish the fundamental components influencing anion recognition at aqueous interfaces. The two charged receptors bearing two alkyl chains each displayed strong phosphate affinities and 103- and 101-fold anti-Hofmeister selectivity over chloride, respectively. Neutral thiourea and the single-chain guanidinium receptor did not bind phosphate, revealing the importance of electrostatic interactions and supramolecular organization. Consistently, charge screening at high ionic strength weakens binding. Spectroscopic results confirmed phosphate binding to the double alkyl chain guanidinium receptor, whereas surface pressure isotherm results alone showed a minimal change, thus emphasizing the importance of interfacial spectroscopy. We found that the binding site identity, charged interface created by the electrical double layer, and supramolecular superstructure all affect interfacial binding. These detailed insights into phosphate recognition at aqueous interfaces provide a foundation to develop efficient receptors for phosphate capture.

The interaction and mobility of ions in complex systems are fundamental to processes throughout chemistry, biology, and physics. However, nanoscale characterization of ion stability and migration remains poorly understood. Here, we examine ion movements to and from physisorbed molecular receptors at solution–graphite interfaces by developing a theoretical model alongside experimental scanning tunneling microscopy (STM) results. The model includes van der Waals forces and electrostatic interactions originating from the surface, tip, and physisorbed receptors, as well as a tip–surface electric field arising from the STM bias voltage (Vb). Our model reveals how both the electric field and tip–surface distance, dtip, can influence anion stability at the receptor binding sites on the surface or at the STM tip, as well as the size of the barrier for anion transitions between those locations. These predictions agree well with prior and new STM results from the interactions of anions with aryl-triazole receptors that order into functional monolayers on graphite. Scanning produces clear resolution at large magnitude negative surface biases (−0.8 V) while resolution degrades at small negative surface biases (−0.4 V). The loss in resolution arises from frequent tip retractions assigned to anion migration within the tip–surface tunneling region. This experimental evidence in combination with support from the model demonstrates a local voltage gating of anions with the STM tip inside physisorbed receptors. This generalized model and experimental evidence may help to provide a basis to understand the nanoscale details of related chemical transformations and their underlying thermodynamic and kinetic preferences.

A cage molecule incorporating three electron donating monopyrrolotetrathiafulvalene units was synthesised to host electron accepting [60]fullerenes. Formation of a strong 1 : 1 donor-acceptor (D-A) complex C60⊂1 was confirmed by solid state X-ray analysis as well as (1)H NMR and absorption spectroscopic analyses of the arising charge-transfer (CT) band (λ = 735 nm, ε ≈ 840 M(-1) cm(-1)). Inserting Li(+) inside the [60]fullerene increased the binding 28-fold (Ka = 3.7 × 10(6) M(-1)) and a large bathochromic shift of the CT band to the near infrared (NIR) region (λ = 1104 nm, ε ≈ 4800 M(-1) cm(-1)) was observed.

Encapsulation of unstable guests is a powerful way to enhance their stability. The lifetimes of organic anions and their radicals produced by reduction are typically short on account of reactivity with oxygen while their larger sizes preclude use of traditional anion receptors. Here we demonstrate the encapsulation and noncovalent stabilization of organic radical anions by C–H hydrogen bonding in π-stacked pairs of cyanostar macrocycles having large cavities. Using electrogenerated tetrazine radical anions, we observe significant extension of their lifetimes, facile molecular switching, and extremely large stabilization energies. The guests form threaded pseudorotaxanes. Complexation extends the radical lifetimes from 2 h to over 20 days without altering its electronic structure. Electrochemical studies show tetrazines thread inside a pair of cyanostar macrocycles following voltage-driven reduction (+e–) of the tetrazine at −1.00 V and that the complex disassembles after reoxidation (−e–) at −0.05 V. This...

Contrary to the simple expectations from Coulomb's law, Weinhold proposed that anions can stabilize each other as metastable dimers, yet experimental evidence for these species and their mutual stabilization is missing. We show that two bisulfate anions can form such dimers, which stabilize each other with self-complementary hydrogen bonds, by encapsulation inside a pair of cyanostar macrocycles. The resulting 2:2 complex of the bisulfate homodimer persists across all states of matter, including in solution. The bisulfate dimer's OH⋅⋅⋅O hydrogen bonding is seen in a 1H NMR peak at 13.75 ppm, which is consistent with borderline-strong hydrogen bonds.

The existence of two rings in [3]pseudorotaxanes presents opportunities for those rings to undergo double switching and cooperative mechanical coupling. To investigate this capability, we identified a new strategy for bringing two rings into contact with each other and conducted mechanistic studies to reveal their kinetic cooperativity. A redox-active tetrazine ligand bearing two binding sites was selected to allow for two mobile copper(I) macrocycle ring moieties to come together. To realize this switching modality, ligands were screened against their ability to serve as stations on which the rings are initially parked, ultimately identifying 5,5'-dimethyl-2,2'-bipyridine. The kinetics of switching a macrocycle in a single-site [2]pseudorotaxane between bipyridine and single-site tetrazine stations were examined using electrochemistry. The forward movement was rate-limited by the bimolecular reaction between reduced tetrazine and bipyridine [2]pseudorotaxane. Two bipyridines were then used with a double-site tetrazine to verify double switching of two rings. Our results indicated stepwise movements, with the first ring moving 4 times more frequently (faster) than the second. While this behavior is indicative of anticooperative kinetics, positive thermodynamic cooperativity sets the two rings in motion even though just one tetrazine is reduced with one electron. Double switching in this [3]pseudorotaxane uniquely demonstrates how a series of independent thermodynamic states and kinetic paths govern an apparently simple mechanical motion.

Shape-persistent macrocycles are attractive functional targets for synthesis, molecular recognition, and hierarchical self-assembly. Such macrocycles are noncollapsible and geometrically well-defined, and they are traditionally characterized by having repeat units and low conformational flexibility. Here, we find it necessary to refine these ideas in the face of highly flexible yet shape-persistent macrocycles. A molecule is shape-persistent if it has a small change in shape when perturbed by external stimuli (e.g., heat, light, and redox chemistry). In support of this idea, we provide the first examination of the relationships between a macrocycle's shape persistence, its conformational space, and the resulting functions. We do this with a star-shaped macrocycle called cyanostar that is flexible as well as being shape-persistent. We employed molecular dynamics (MD), density functional theory (DFT), and NMR experiments. Considering a thermal bath as a stimulus, we found a single macrocycle has 332 accessible conformers with olefins undergoing rapid interconversion by up-down and in-out motions on short time scales (0.2 ns). These many interconverting conformations classify single cyanostars as flexible. To determine and confirm that cyanostars are shape-persistent, we show that they have a high 87% shape similarity across these conformations. To further test the idea, we use the binding of diglyme to the single macrocycle as guest-induced stimulation. This guest has almost no effect on the conformational space. However, formation of a 2:1 sandwich complex involving two macrocycles enhances rigidity and dramatically shifts the conformer distribution toward perfect bowls. Overall, the present study expands the scope of shape-persistent macrocycles to include flexible macrocycles if, and only if, their conformers have similar shapes.

The creation and functionality of new classes of macrocycles that are shape persistent and can bind anions is described. The genesis of triazolophane macrocycles emerges out of activity surrounding 1,2,3-triazoles made using click chemistry; and the same triazoles are responsible for anion capture. Mistakes made and lessons learnt in anion recognition provide deeper understanding that, together with theory, now provides for computer-aided receptor design. The lessons are acted upon in the creation of two new macrocycles. First, cyanostars are larger and like to capture large anions. Second is tricarb, which also favors large anions but shows a propensity to self-assemble in an orderly and stable manner, laying a foundation for future designs of hierarchical nanostructures.

Achieving high ionic conductivity in lithium-ion battery (LIB) electrolytes requires dissociation of Li-salts; however, though the generation of free Li+ from salt dissociation is advantageous, the presence of freely diffusing anions may reduce the Li+ transference number. The use of supramolecular anion recognition to regulate and modify ion-pairing and diffusion of anions in battery electrolytes is yet to be deeply understood. Herein, we demonstrate that addition of a selective and strong PF6–-binding macrocycle to a solution of LiPF6 in low dielectric media leads to enhanced ion pair dissociation and an increased Li+ transference number. This work provides a well-defined model system to study the effects of anion binding in battery electrolytes.

A new rotamer-based strategy for negative allostery has been used to control host-host interactions and product yield upon anion complexation. Coassembly of anion dimers as guests inside two cyanostar macrocycles drives selection of one rotamer in which all ten steric groups get directed outward to destabilize triply stacked macrocycles. A large entropy penalty (Δ S) is quantified upon anion binding when the multiple dynamic rotamers collapse down to one.

Anion recognition impacts many areas of chemistry and often relies on receptors with multiple hydrogen-bond donors. Previous studies of these donors in small molecules have long promoted the idea that electrostatic interactions alone correlate with association strength, yet this correlation has not been critically evaluated in the framework of larger, macrocyclic receptors. Here, we provide that assessment by evaluating how much electrostatics contributes to the gas-phase binding energy of macrocyclic receptors with various anions. Whereas small-molecule complexes behave as expected, we find that electrostatic interactions fail to accurately describe total binding energies of many common macrocyclic receptors: calix[4]pyrroles, dipyrrolyldiketones, indolocarbazoles, amido-pyrroles, triazolophanes, and cyanostars. This deviation arises from the fact that most macrocycles have multiple points of contact with the anion. Whereas the hydrogen-bond donors collectively stabilize the anion, the interaction distances are typically larger than equilibrium values seen with small molecules. This leads to increases in the relative contributions of the attractive components such as induction (e.g., induced dipoles) and dispersion, which are found to be as high as 32 % for CH-donor based tricarbazole triazolophane complex with large polarizable ClO4- . This study augments previous observations of the importance of dispersion and induction towards anion binding of macrocyclic receptors in solution.

The coordinated motion of many individual components underpins the operation of all machines. However, despite generations of experience in engineering, understanding the motion of three or more coupled components remains a challenge, known since the time of Newton as the “three-body problem.” Here, we describe, quantify, and simulate a molecular three-body problem of threading two molecular rings onto a linear molecular thread. Specifically, we use voltage-triggered reduction of a tetrazine-based thread to capture two cyanostar macrocycles and form a [3]pseudorotaxane product. As a consequence of the noncovalent coupling between the cyanostar rings, we find the threading occurs by an unexpected and rare inchworm-like motion where one ring follows the other. The mechanism was derived from controls, analysis of cyclic voltammetry (CV) traces, and Brownian dynamics simulations. CVs from two noncovalently interacting rings match that of two covalently linked rings designed to thread via the inchworm pathway, and they deviate considerably from the CV of a macrocycle designed to thread via a stepwise pathway. Time-dependent electrochemistry provides estimates of rate constants for threading. Experimentally derived parameters (energy wells, barriers, diffusion coefficients) helped determine likely pathways of motion with rate-kinetics and Brownian dynamics simulations. Simulations verified intercomponent coupling could be separated into ring–thread interactions for kinetics, and ring–ring interactions for thermodynamics to reduce the three-body problem to a two-body one. Our findings provide a basis for high-throughput design of molecular machinery with multiple components undergoing coupled motion.

Hierarchical assembly provides a route to complex architectures when using building blocks with strong and structurally well-defined recognition elements. These rules are traditionally expressed using cationic templates with reliable metal-ligand bonding but use of anions is rare on account of weak anion-host contacts. We investigate an approach that relies on host-host interactions to fortify assemblies formed between bisulfate anion dimers, [HSO4⋅⋅⋅HSO4]2- , and shape-persistent macrocycles called tricarbazole triazolophanes. These macrocycles have significant self-association. In chloroform, they form high fidelity, triple-decker stacks with bisulfate dimers. The strength of host-host interactions allows for preferential formation of the 3:2 tricarb:bisulfate architecture over an ion-paired architecture seen with analogous macrocycles with much weaker self-association. Solvent was expected and found to tune host-host contacts enabling formation of a 2:2 complex and solvent-driven switching between triple- and double-stacked structures. Crystallography of the 2:2:2 complex supports the idea that significant host-host interactions with tricarb arises from dipole-stabilized π-stacking. Computational studies were also conducted further highlighting the importance of host-host interactions in stacked complexes of tricarb. These findings unambiguously verify the importance of host-host interactions in the assembly and stability of discrete, responsive anion-templated architectures.

The size-dependent recognition of large anions by shape-persistent macrocycles is poorly understood. To address this shortcoming, we created a bulky cyanostar that only forms 1 : 1 complexes and show the affinities best follow the expectations of size matching but only when solvent bias is removed.

Cyanostar, a pentagonal macrocyclic compound with an electropositive cavity, binds anions with CH-based hydrogen bonding. The large size of the cyanostar’s cavity along with its planarity favor formation of 2:1 sandwich complexes with larger anions, like perchlorate, ClO4–, relative to the smaller chloride. We also show that cyanostar is selective for ClO4– over the bulky salicylate anions by using NMR titration studies to measure affinity. The performance of this novel macrocycle as an anion ionophore in membrane ion sensors was evaluated. The cyanostar-based electrodes demonstrated a Nernstian response toward perchlorate with selectivity patterns distinctly different from the normal Hofmeister series. Different membrane compositions were explored to identify the optimum concentrations of the ionophore, plasticizer, and lipophilic additive that give rise to the best perchlorate selectivity. Changing the concentration of the lipophilic additive tridodecylmethylammonium chloride was found to impact the sel...

On planet Earth, water is everywhere: the majority of the surface is covered with it; it is a key component of all life; its vapour and droplets fill the lower atmosphere; and even rocks contain it and undergo geomorphological changes because of it. A community of physical scientists largely drives studies of the chemistry of water and aqueous solutions, with expertise in biochemistry, spectroscopy and computer modelling. More recently, however, supramolecular chemists - with their expertise in macrocyclic synthesis and measuring supramolecular interactions - have renewed their interest in water-mediated non-covalent interactions. These two groups offer complementary expertise that, if harnessed, offer to accelerate our understanding of aqueous supramolecular chemistry and water writ large. This Review summarizes the state-of-the-art of the two fields, and highlights where there is latent chemical space for collaborative exploration by the two groups.

The recognition of nitroaromatic explosives by a tetrakis-tetrathiafulvalene-calix[4]pyrrole receptor (TTF-C[4]P) yields a "turn on" and fingerprinting response in the resonance Raman scattering observed in solution and the solid state. Intensity changes in nitro vibrations with analyte complexation occur via a mechanism of resonance between the 785 nm laser line and the strongly absorbing charge-transfer chromophore arising from the complex between electron-donating TTF-C[4]P and electron-accepting nitroaromatic explosives. The addition of chloride forms the Cl-·TTF-C[4]P complex resetting the system for reuse.

The hierarchical assembly of colored cationic molecules with receptor-modified counteranions can be used to control optical properties in materials. However, our knowledge of when the optical properties emerge in the hierarchical organization and the variety of cation–anion salts that are available to create these materials is limited. In this work, we extend the salts from small halides to large inorganic anions and determine how the structure coevolves with the emission properties using solution assemblies. We study the chromogenic trioxatriangulenium (TOTA+) cation and its coassembly with cyanostar (CS) macrocycles selected to modify tetrafluoroborate (BF4–) counteranions through formation of 2:1 sandwich complexes. In the solid state, the TOTA+ cation stacks in an alternating manner with the sandwich complexes producing new red-shifted emission and absorption bands. Critical to assigning the structural origin of the new optical features across the four levels of organization (1° → 4°) is the selection...

Hydroxyanions pair up inside CH H-bonding cyanostar macrocycles against Coulombic repulsions and solvation forces acting to separate them. The driving forces responsible for assembly of bisulfate (HSO4−) dimers are unclear. We investigate them using solvent quality to tune the contributing forces and we take advantage of characteristic NMR signatures to follow the species distributions. We show that apolar solvents enhance ion pairing to stabilize formation of a 2:2:2 complex composed of π-stacked cyanostars encapsulating the [HSO4***HSO4]2− dimer and endcapped by tetrabutylammonium cations. Without cations engaged, a third macrocycle can be recruited with the aid of solvophobic forces in more polar solvents. The third macrocycle generates a more potent electropositive pocket in which to stabilize the anti-electrostatic anion dimer as a 3:2 assembly. We also see unprecedented evidence for a water molecule bound to the complex in the acetonitrile solution. In methanol, OH H-bonding leads to formation of 2:1 complexes by bisulfate solvation inside the macrocycles inhibiting anion dimers. Knowledge of the driving forces for stabilization (strong OH***O H-bonding, CH H-bonding, ion pairs, π-stacking) competing with destabilization (Coulomb repulsion, solvation) allows high-fidelity selection of the assemblies. Thermodynamic stabilization of hyrdroxyanion dimers also demonstrates the ability to use macrocycles to control ion speciation and stoichiometry of the overall assemblies.

Inspired by halorhodopsin's use of photoisomerization to regulate chloride, aryltriazole-based foldamers have been created to "catch and release" chloride ions upon light irradiation of end-appended azobenzenes. The proposed mode of stabilization exploits a β-sheet-like hydrogen-bonding array to cooperatively interlock the ends of a foldamer together with its helical core. We find that the hydrogen-bonding array has a greater influence on stabilizing the helix than the π-stacked seam under the conditions examined (50:50 MeCN/THF). Thus, we show how it is possible to enhance the difference between Cl(-) binding and release using light-dependent control over the foldamer's degree of helix stabilization. Making and breaking three π-π contacts with light caused an 8-fold change in chloride affinity (40 300 M(-1) ⇄ 5000 M(-1)), five π-π contacts produced a 17-fold change (126 000 M(-1) ⇄ 7400 M(-1)), and strategically located hydrogen-bonding units enabled a greater 84-fold differential (970 000 M(-1) ⇄ 11 600 M(-1)). The improved performances were attributed to stepwise increases in the preorganization of the binding pocket that catches chloride while leaving the cis states with just one π-π contact relatively unchanged.

Mechanistic understanding of the translational movements in molecular switches is essential for designing machine-like prototypes capable of following set pathways of motion. To this end, we demonstrated that increasing the station-to-station distance will speed up the linear movements forward and slow down the movements backward in a homologous series of bistable rotaxanes. Four redox-active rotaxanes, which drove a cyclobis(paraquat-p-phenylene) (CBPQT(4+)) mobile ring between a tetrathiafulvalene (TTF) station and an oxyphenylene station, were synthesized with only variations to the lengths of the glycol linker connecting the two stations (n = 5, 8, 11, and 23 atoms). We undertook the first mechanistic study of the full cycle of motion in this class of molecular switch using cyclic voltammetry. The kinetics parameters (k, ΔG(‡)) of switching were determined at different temperatures to provide activation enthalpies (ΔH(‡)) and entropies (ΔS(‡)). Longer glycol linkers led to modest increases in the forward escape (t(1/2) = 60 to7 ms). The rate-limiting step involves movement of the tetracationic CBPQT(4+) ring away from the singly oxidized TTF(+) unit by overcoming one of the thiomethyl (SMe) speed bumps before proceeding on to the secondary oxyphenylene station. Upon reduction, however, the return translational movement of the CBPQT(4+) ring from the oxyphenylene station back to the neutral TTF station was slowed considerably by the longer linkers (t(1/2) = 1.4 to69 s); though not because of a diffusive walk. The reduced rate of motion backward depended on folded structures that were only present with longer linkers.

The ability of the C and N ends of the cyanide anion (CN(-)) as acceptors of hydrogen bonds, an experimentally difficult problem, has been computationally examined in this study. Structures obtained in our previous work involving cyanide binding within the cavity of a triazolophane macrocycle (Chem.-Eur. J. 2011, 17, 9123-9129) were used to analyze the problem. Three different approaches involving (a) breakdown of the triazolophane into smaller components, (b) population analyses, and (c) ion-dipole analyses helped demonstrate that the N terminus of cyanide is a slightly better hydrogen bond acceptor than the C terminus even though it is not the site of protonation or covalent bond formation. This outcome reflects a competition between the preference for noncovalent interactions at the nitrogen and covalent bond formation at the carbon.

Despite its ubiquity during the binding and sensing of fluoride, the role of bifluoride (HF2(-)) and its binding properties are almost always overlooked. Here, we give one of the first examinations of bifluoride recognition in which we use computer-aided design to modify the cavity shape of triazolophanes to better match with HF2(-). Computational investigation indicates that HF2(-) and Cl(-) should have similar binding affinities to the parent triazolophane in the gas phase. Evaluation of the binding geometries revealed a preference for binding of the linear HF2(-) along the north-south axis with a smaller Boltzmann weighted population aligned east-west and all states being accessed rapidly through in-plane precessional rotations of the anion. While the (1)H NMR spectroscopy studies are consistent with the calculated structural aspects, binding affinities in solution were determined to be significantly smaller for the bifluoride than the chloride. Computed geometries suggested that a 20° tilting of the bifluoride (stemming from the cavity size) could account for the 25-fold difference between the two binding affinities, HF2(-)Cl(-). Structural variations to the triazolophane's geometry and electronic modifications to the network of hydrogen bond donors were subsequently screened in a stepwise manner using density functional theory calculations to yield a final design that eliminates the tilting. Correspondingly, the bifluoride's binding affinity (K ∼ 10(6) M(-1)) increased and was also found to remain equal to chloride in the gas and solution phases. The new oblate cavity appeared to hold the HF2(-) in a single east-west arrangement. Our findings demonstrate the promising ability of computer-aided design to fine-tune the structural and electronic match in anion receptors as a means to control the arrangement and binding strength of a desired guest.

Self-assembled 2 × 2 grids have been characterised as high-fidelity species produced when the correct stoichiometric ratios are met, but rarely are the individual steps leading to and from their formation characterised. Here, we present such a study using equilibrium-restricted factor analysis to model a set of UV–vis spectra starting from a bis-bidentate ligand to the assembly of a 2 × 2 grid complex upon titration with 1 equiv. of [Cu(MeCN)4](PF6) and to disassembly upon further titration. Intermediate species [CuL2]+, [Cu2L3]2+, [Cu3L2]3+ and [Cu2L]2+ are evidenced along the assembly and disassembly pathways. Complementary 1H NMR titrations are consistent with the rich set of complexes and equilibria involved. Given the nature of the assembly process, the assembly is entropy driven and likely enthalpy driven as well. The disassembly process is both enthalpy and entropy driven according to the standard free energy values derived from the modelling of the spectrophotometric titration data.

An unexpected doubling in redox storage emerging from a new pincer ligand upon bis-ligation of iron(ii) is described. When tetrazine arms are present at the two ortho positions of pyridine, the resulting bis-tetrazinyl pyridine (btzp) pincer ligand displays a single one-electron reduction at ca. -0.85 V vs. Ag/AgCl. Complexation to iron, giving the cation Fe(btzp)2(2+), shows no oxidation but four reduction waves in cyclic voltammetry instead of the two expected for the two constituent ligands. Mossbauer, X-ray diffraction and NMR studies show the iron species to contain low spin Fe(ii), but with evidence of back donation from iron to the pincer ligands. CV and UV-Vis spectroelectrochemistry, as well as titration studies as monitored by CV, electronic spectra and EPR reveal the chemical reversibility of forming the reduced species. DFT and EPR studies show varying degrees of delocalization of unpaired spin in different species, including that of a btzp(-1) radical anion, partnered with various cations.