Search

A new nanofabrication method for construction of complex superlattice structure with versatile super-periodicity is developed using the moiré fringe of anodized aluminium oxide (AAO) membranes. Two ultrathin AAO membranes with long-range order holes are stacked to form 2D moiré nanopatterns. Both rotational symmetry and the periodicity of the holes are modified by the relative spatial displacement between the superimposing layers. Using the membranes as metal evaporation masks, a wide assortment of complex Al nanostructures are fabricated by varying the misorientation angle of the two ultrathin AAO membranes. Highly ordered Al nanoparticles with different sizes, shapes, orientations, and arrangements on substrates are achieved, which are expected to give abundant surface plasmon mode.

Bromotrimethylsilane (TMSBr)-promoted intramolecular cyclization of (o-arylethynyl)benzyl ethers to form 1H-isochromenes at room temperature is reported. Further studies indicated that vinyl carbocations are the reaction intermediates which are stabilized by the conjugated aryl groups. Thus, O-addition of benzyl ethers/tetrahydropyrans to alkynes was achieved under metal-free, acidic conditions. These reaction conditions were compatible with an alkynyl Prins reaction; therefore, 1H-isochromenes were produced directly from alkynyl benzaldehydes and alkynyl alcohols using a one-pot procedure.

Graphene shows unique properties such as high mechanical strength and high thermal and chemical stability, making it promising for versatile applications. However, the lack of either interlayer or interface covalent bonds causes this type of 2D materials assembled via van der Waals forces to suffer from weak adhesion with the underlying substrates, thus hindering their application. In this study, a novel method based on a hydrothermal reaction was proposed to synthesize fluorinated graphene (FG) through a facile, scalable, and highly safe process, where a mixture of poly(perfluorosulfonic acid) (C7HF13O5S·C2F4, PFSA) and graphene oxide (GO) as the precursor was employed. The FG sheets prepared by the electrophoretic deposition (EPD) method exhibit superior conformity layered structure on a metal foil. Due to the in situ formation of ionic-covalently bonded F-Cu-F and Cu-F-C between fluorine on the FG sheets and dissolved Cu ions from the copper foil, the deposited film shows ultrastrong adhesion that can sustain up to 3 MPa of shear force. Furthermore, by changing the parameters in the EPD process, such as the EPD duration and applied voltage, the thickness and hydrophobicity of the film can be well controlled from 0.20 μm to 2.51 μm with a contact angle from 93.03˚ to 122.44˚. This study provides a new strategy to prepare a robust film for the assembly of 2D materials, not limited to graphene, with ultrastrong adhesion on substrates, which could solve the long-reported issue of weak adhesion and low durability of graphene-/2D-based functional composites and coatings.

Silicone breast implants are used worldwide for breast augmentation. After an axillary, periareolar or inframmary incision has been made to create an adequately sized pocket; the surgeon usually uses his or her fingers to insert the implant. The use of fingers makes the insertion process time-consuming, a few minutes or more. There are some complications, including need to ensure that the incision is long enough for the implant to be inserted, scar hypertrophy caused by implant insertion friction damage to the edge of incision, and the occasional need to ask the surgical assistant to lend more fingers to facilitate satisfactory insertion and placement. In addition, the use of gloved fingers to repeatedly push on the implant can increase the risk of contamination, postoperative silicone microleakage, and capsular contracture. To resolve these problems, we developed an improved silicone breast implant injector (reusable stainless steel 2007; single use polypropylene 2018) that can be used more easily than fingers and other “no touch” devices. From 2013 to 2017, the first author, a plastic surgeon at our clinic, used the 2007 reusable stainless steel injector to perform breast augmentations in 53 patients (Ave. age 23.8 years; range 19–67 years), 5 (8.8%) receiving 250-ml implants, 41 (77.4%) 251–300-ml implants, and 7 (13.8%) 301–400-ml implants. Overall, results were satisfactory except for two patients (3.7%) in whom capsular contracture occurred. There were no ruptures. Use of the injector made it possible to shorten the length of the incisions from the traditional 4–7 to 3–4 cm and expedited insertion time from a few minutes to a few seconds. This “no touch” insertion technique reduced implant damage caused by finger pushing, leading to a decrease in silicone microleakage and capsular contracture rate. It was performed with no friction trauma to the incision edge or harm to the surgeon’s fingers. It was found to be an effective alternative operative tool for the insertion of silicone breast implants. Level of evidence IV This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Background: Cardiovascular dysfunction in cirrhotic patients affects survival and the development of cirrhotic complications. We aimed to evaluate potential echocardiographic parameters to predict mortality and acute kidney injury (AKI) in cirrhotic patients. Methods: A total of 103 cirrhotic patients who underwent echocardiography between February 2009 and August 2016 in Taipei Veterans General Hospital were retrospectively enrolled. Cardiac function was evaluated using transthoracic two-dimensional echocardiography with tissue Doppler imaging. Cox hazard regression analysis was used for assessing predictors for 1-year mortality and AKI within 1 year. Results: Baseline echocardiographic parameters were similar between survivors (n = 92) and nonsurvivors (n = 11). Lower serum levels of albumin, as well as higher albumin-bilirubin (ALBI) scores, Child-Pugh scores, and model for end-stage liver disease scores were observed in nonsurvivors. Cox proportional hazard regression analysis revealed Child-Pugh score as the only predictor of 1-year mortality. Baseline serum creatinine (Cr) > 1.5 mg/dL, total bilirubin > 2 mg/dL, and a higher E/e′ ratio predict occurrence of AKI within 1 year. Among patients with serum Cr < 1.5 mg/dL, an increased atrial filling velocity and higher ALBI scores predict AKI occurrence within 1 year. Conclusion: Severity of underlying liver disease but not echocardiographic parameters predicts 1-year mortality in cirrhosis. Early echocardiographic signs of diastolic dysfunction and higher ALBI scores may predict development of AKI in cirrhotic patients with serum Cr < 1.5 mg/dL.

BACKGROUND Both regorafenib and reduced-intensity FOLFOXIRI (riFOLFOXIRI) prolong survival in patients with metastatic colorectal cancer (mCRC). However, the sequence in which they should be administrated first in late-line treatment for refractory mCRC remains unclear. PATIENTS AND METHODS This study was a single-center retrospective cohort study that reviewed data from patients at Taipei Veterans General Hospital, Taiwan, with mCRC refractory to fluorouracil, irinotecan, oxaliplatin, cetuximab (wild-type RAS), and bevacizumab. Patients were divided into 2 groups: a regorafenib-first group and a riFOLFOXIRI-first group. The Kaplan-Meier method and log-rank test were used to analyze survival, and a Cox proportional hazards model was used for univariate, multivariate, and subgroup analyses. RESULTS A total of 136 and 55 patients followed a regorafenib-first or riFOLFOXIRI-first treatment strategy, respectively. At baseline, patient characteristics were similar between the groups, except for younger age in the riFOLFOXIRI-first group. The regorafenib-first group had better overall survival (13.8 vs. 10.7 mo, P=0.038), whereas patients in the riFOLFOXIRI-first group had a better partial response rate (P=0.005) but a higher rate of discontinuation due to adverse effects (P=0.004) and cross-over to regorafenib (P

The effect of ultraviolet (UV) treatment on the electrical and surface properties of SiO2 is studied. UV treatment leads to the formation of the silicon peroxide in SiO2 near the surface, thus increasing the capacitance of SiO2. The effect of SiO2 gate dielectrics with UV treatment on carrier transport for a pentacene-based organic thin-film transistor (OTFT) is also studied. Experimental identification confirms that the shift of the threshold voltage towards positive gate-source voltages for OTFTs is due to an increase in the number of trap states in SiO2 near the pentacene/SiO2 interface. The existence of a peroxidation layer between pentacene and SiO2 serves to strengthen the pentacene-SiO2 interaction, reducing the field-effect carrier mobility and the leakage current in OTFTs.

An orchestrated wound healing program drives skin repair via collective epidermal cell proliferation and migration. However, the molecular determinants of the tissue microenvironment supporting wound healing remain poorly understood. Herein we discover that proteoglycan Agrin is enriched within the early wound-microenvironment and is indispensable for efficient healing. Agrin enhances the mechanoperception of keratinocytes by augmenting their stiffness, traction stress and fluidic velocity fields in retaliation to bulk substrate rigidity. Importantly, Agrin overhauls cytoskeletal architecture via enhancing actomyosin cables upon sensing geometric stress and force following an injury. Moreover, we identify Matrix Metalloproteinase-12 (MMP12) as a downstream effector of Agrin’s mechanoperception. We also reveal a promising potential of a recombinant Agrin fragment as a bio-additive material that assimilates optimal mechanobiological and pro-angiogenic parameters by engaging MMP12 in accelerated wound healing. Together, we propose that Agrin-MMP12 pathway integrates a broad range of mechanical stimuli to coordinate a competent skin wound healing niche., Replenishing key extracellular matrix (ECM) proteins facilitate wound healing through unclear mechanisms. Here the authors report that injury-triggered Agrin, an ECM proteoglycan, tunes a mechanocompetent niche by engaging MMP-12, thereby enforcing efficient skin wound healing.

A therapeutic approach for promoting neuroprotection and brain functional regeneration after strokes is still lacking. Histone deacetylase 1 (HDAC1), which belongs to the histone deacetylase family, is involved in the transcriptional repression of cell-cycle-modulated genes and DNA damage repair during neurodegeneration. Our previous data showed that the protein level and enzymatic activity of HDAC1 are deregulated in stroke pathogenesis. A novel compound named 5104434 exhibits efficacy to selectively activate HDAC1 enzymatic function in neurodegeneration, but its potential in stroke therapy is still unknown. In this study, we adopted an induced rat model with cerebral ischemia using the vessel dilator endothelin-1 to evaluate the potential of compound 5104434. Our results indicated compound 5104434 selectively restored HDAC1 enzymatic activity after oxygen and glucose deprivation, preserved neurite morphology, and protected neurons from ischemic damage in vitro. In addition, compound 5104434 attenuated the infarct volume, neuronal loss, apoptosis, DNA damage, and DNA breaks in cerebral ischemia rats. It further ameliorated the behavioral outcomes of neuromuscular response, balance, forepaw strength, and functional recovery. Collectively, our data support the efficacy of compound 5104434 in stroke therapy and contend that it can be considered for clinical trial evaluation.

Hyperosmotic tear stimulates human corneal nerve endings, activates ocular immune response, and elicits dry-eye symptoms. A soft contact lens (SCL) covers the cornea preventing it from experiencing direct tear evaporation and the resulting blink-periodic salinity increases. For the cornea to experience hyperosmolarity due to tear evaporation, salt must transport across the SCL to the post-lens tear film (PoLTF) bathing the cornea. Consequently, limited salt transport across a SCL potentially protects the ocular surface from hyperosmotic tear. In addition, despite lens-wear discomfort sharing common sensations to dry eye, no correlation is available between measured tear hyperosmolarity and SCL-wear discomfort. Lack of documentation is likely because clinical measurements of tear osmolarity during lens wear do not interrogate the tear osmolarity of the PoLTF that actually overlays the cornea. Rather, tear osmolarity is clinically measured in the tear meniscus. For the first time, we mathematically quantify tear osmolarity in the PoLTF and show that it differs significantly from the clinically measured tear-meniscus osmolarity. We show further that aqueous-deficient dry eye and evaporative dry eye both exacerbate the hyperosmolarity of the PoLTF. Nevertheless, depending on lens salt-transport properties (i.e., diffusivity, partition coefficient, and thickness), a SCL can indeed protect against corneal hyperosmolarity by reducing PoLTF salinity to below that of the ocular surface during no-lens wear. Importantly, PoLTF osmolarity for dry-eye patients can be reduced to that of normal eyes with no-lens wear provided that the lens exhibits a low lens-salt diffusivity. Infrequent blinking increases PoLTF osmolarity consistent with lens-wear discomfort. Judicious design of SCL material salt-transport properties can ameliorate corneal hyperosmolarity. Our results confirm the importance of PoLTF osmolarity during SCL wear and indicate a possible relation between PoLTF osmolarity and contact-lens discomfort.

We performed frequency-modulated (AC) and steady-state (DC) surface photovoltage spectroscopy (SPS) measurements on a bilayer structure consisting of an organic semiconductor (P3HT, P3HT:PC61BM, or...

White light-emitting diodes (LEDs) have been achieved using photopolymerization. Red and green CdSe/ZnS core–shell quantum dots (QDs) are dispersed in photopolymerized aliphatic acrylic acrylate resins, cured by using 36 W UV light for 1.5 min producing QD–acrylate nanocomposites, and then a hybrid LED device is achieved using the QD–acrylate nanocomposite with two emission wavelengths excited by using a blue InGaN LED chip. The cured QD–acrylate nanocomposite films are characterized by using ultraviolet–visible, fluorescence, scanning electron microscopy, atomic force microscopy, and thermogravimetric analysis measurements. Photopolymerization is conveniently employed to adjust several parameters of the CIE-1931 coordinate (x, y), color temperature, and color rending index (CRI). Good white balance of the red-green hybrid device achieves a luminance of 7976 lm/m2 at a 30 mA working current. The light emission efficiency, CRI, and color temperature of 14%, 47, and 11 204 K, respectively, are attained at this working current.

This study investigated variations in the chemical compositions and thermal decomposition kinetics of Japanese cedar and beech wood during heat treatment. Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectra revealed that various reactions, such as hemicellulose deacetylation, condensation reactions causing lignin cross-linking, and reductions in cellulose amorphous regions, were carried out during the heat treatment process. In addition, combinations of FTIR spectra and principal component analysis (PCA) succeeded in discriminating the major changes in functional groups of wood at various heat treatment temperatures. On the other hand, the decrease in the storage modulus of wood was more rapid in the presence of oxygen than in an oxygen-free atmosphere during heat treatment. Accordingly, the activation energies of thermal decomposition using Arrhenius model for Japanese cedar and beech were 120.6 and 141.3 kJ/mol under air, respectively, while these values were 124.8 and 150.0 kJ/mol under nitrogen, respectively.

ELKS1 controls mast cell degranulation by regulating the transcription of Stxbp2 and Syntaxin 4 via Kdm2b stabilization., ELKS1 is a protein with proposed roles in regulated exocytosis in neurons and nuclear factor κB (NF-κB) signaling in cancer cells. However, how these two potential roles come together under physiological settings remain unknown. Since both regulated exocytosis and NF-κB signaling are determinants of mast cell (MC) functions, we generated mice lacking ELKS1 in connective tissue MCs (Elks1f/f Mcpt5-Cre) and found that while ELKS1 is dispensable for NF-κB–mediated cytokine production, it is essential for MC degranulation both in vivo and in vitro. Impaired degranulation was caused by reduced transcription of Syntaxin 4 (STX4) and Syntaxin binding protein 2 (Stxpb2), resulting from a lack of ELKS1-mediated stabilization of lysine-specific demethylase 2B (Kdm2b), which is an essential regulator of STX4 and Stxbp2 transcription. These results suggest a transcriptional role for active-zone proteins like ELKS1 and suggest that they may regulate exocytosis through a novel mechanism involving transcription of key exocytosis proteins.

In the present study, anti-inflammatory activity of the methanol extracts of soymilk and soymilk fermented with Streptococcus salivarius subsp. thermophilus CCRC 14805 alone or in conjunction with Bificobacterium infantis CCRC 14603 was evaluated. It was found that extracts of soymilk and the prepared fermented soymilk dose-dependently suppress nitric oxide (NO) production of lipopolysaccharide (LPS)-induced macrophages, with soymilk showing the highest inhibition ability followed by S. thermophilus-fermented soymilk. Extracts of soymilk and fermented soymilk did not affect the activity of inducible nitric oxide synthase (iNOS). The extracts of the fermented soymilk inhibited the protein expression of iNOS in LPS-induced macrophages, but soymilk did not. Moreover, these extracts did not show obvious inhibition on cyclooxygenase-2 (COX-2) protein expression, while all showed the inhibitory effect on LPS-induced pro-inflammatory cytokines including tumor necrosis factor (TNF)-α, interleukin (IL)-6, IL-1β and prostaglandin E2 (PGE2) produced by RAW 264.7 macrophages.

In the present study, the ethanol extract of propolis (EEP) collected in Taiwan was prepared and assayed for the effects concentration, incubation temperature, pH and cell age on the antimicrobial activity against Streptococcus mutans, a dental cavitycausing oral pathogen. Additionally, cell leakage of Str. mutans in presence of EEP was also examined. It was found EEP exerted bacteriostatic and bactericidal effects against Str. mutans, respectively, at concentrations of 1.875 and 3.75 µg/mL or more. At 37°C, Str. mutans was more sensitive to EEP than at 25°C while most resistant at 4°C. Cells of test organism were most susceptible to EEP at acid pH followed by neutral and alkaline pH. It was also noted that cells of Str. mutans in the stationary phase were more resistant, while cells in the mid-exponential phase were more susceptible to EEP. After exposure to EEP, a marked increase in the 260 nm absorbance for the supernatant of culture, was observed, indicating the release of UV-absorbing materials. Scanning electron micrographs also showed an increase in material with irregular shape on the surface of EEP-treated Str. mutans cells.

This research reports a monolithically integrated Humidity/Thermometer/Pressure sensor to realize an environment sensing hub. The environment sensing hub is designed and implemented using the TSMC $0.18 \mu \mathrm{m}$ 1P6M CMOS platform and the follow-up double-side post-CMOS micromachining processes. Features of this study are: (1) Small footprint with less packaging effort: monolithic integration of H/T/P sensors on a single chip, (2) Fast response time of relative-humidity (RH) sensor: removal of backside silicon by double-side post-CMOS process to enhance vapor diffusion of capacitive RH sensor. (3) Double-side post-CMOS process: simultaneously fabricating backside cavities for H/P sensors. Measurement results indicate the performances of the environment sensing hub: humidity sensor with sensitivity of 4.06fF/%RH and response time of 3.1sec (15.7sec for the reference type of conventional design), and pressure sensor with sensitivity of 0.79fF/kPa, thermometer with response of 15.8mV/°C.

In this study, the effects of integrating chloride addition and ultrasonication with electrocoagulation (EC) to remove passive layers were investigated. Experimental results were evaluated by conducting an impedance modulus analysis and by considering the amounts of aluminum released. The effect of different operating parameters, such as the phosphate concentration, ultrasonic power, chloride concentration, and the number of cycles on the efficiency of phosphate removal was examined. The results indicated that the integrated ultrasonic and chloride addition process effectively enhanced the energy efficiency and lifespan of plates due to the reduction of the electric impedance. The concentration of released aluminum increased from 150 to 440 mg/L with the increase of ultrasound from 0 to 100 W. After three test cycles, the use of the ultrasonic process and chloride addition with EC enhanced the phosphate removal efficiency. The removal efficiency of the EC process decreased to 30%; however, the removal efficiency of the integrated process increased to 90%. Scanning electron microscope images showed that using ultrasound could successfully remove the passivation layer on the electrode to enhance the phosphate removal efficiency. However, excessive ultrasonic intensity would result in a thicker passivation layer and thus decrease the removal efficiency. It suggests that the coupled use of chloride addition and ultrasonication in the EC process effectively reduced the passivation layer, thereby increasing the energy efficiency while decreasing the impedance modulus and enhancing the concentration of aluminum ions.

Background The clinical and economic burden of community-acquired bacterial pneumonia (CABP) is significant and is anticipated to increase as the population ages and pathogens become more resistant. Delafloxacin is a fluoroquinolone antibiotic approved in the United States for the treatment of adults with acute bacterial skin and skin structure infections. Delafloxacin’s shape and charge profile uniquely impact its spectrum of activity and side effect profile. This phase 3 study compared the efficacy and safety of delafloxacin with moxifloxacin for the treatment of CABP. Methods A randomized, double-blind, comparator-controlled, multicenter, global phase 3 study compared the efficacy and safety of delafloxacin 300 mg twice daily or moxifloxacin 400 mg once daily in adults with CABP. The primary end point was early clinical response (ECR), defined as improvement at 96 (±24) hours after the first dose of study drug. Clinical response at test of cure (TOC) and microbiologic response were also assessed. Results In the intent-to-treat analysis population (ITT), ECR rates were 88.9% in the delafloxacin group and 89.0% in the moxifloxacin group. Noninferiority of delafloxacin compared with moxifloxacin was demonstrated. At TOC in the ITT population, the success rates were similar between groups. Treatment-emergent adverse events that were considered at least possibly related to the study drug occurred in 65 subjects (15.2%) in the delafloxacin group and 54 (12.6%) in the moxifloxacin group. Conclusions Intravenous/oral delafloxacin monotherapy is effective and well tolerated in the treatment of adults with CABP, providing coverage for Gram-positive, Gram-negative, and atypical pathogens. ClinicalTrials.gov Identifier NCT03534622., This Phase-3 study showed IV/oral delafloxacin monotherapy is well tolerated without QT restrictions or major drug interactions and effective in treatment of adults with CABP due to gram positive and negative as well as atypical pathogens.

The effect of a SiO2 gate dielectric modified by (NH4)2Sx treatment on the temperature-dependent hole transport behavior for pentacene-based organic thin-film transistors (OTFTs) is studied. (NH4)2Sx treatment leads to the formation of S Si bonds (i.e., the formation of a sulfurated layer) on the SiO2 surface that serves to reduce the SiO2 capacitance, increasing the value of the hole mobility in OTFTs. The temperature-dependent hole transport is dominated by the multiple trapping model. It is shown that (NH4)2Sx treatment leads to a reduction in the activation energy, resulting from the formation of a sulfurated layer at the pentacene/SiO2 interface that serves to suppress the pentacene-SiO2 interaction. (NH4)2Sx treatment provides an opportunity to realize the stable and reliable carrier conduction behavior for OTFTs.

In order to get a physical insight into the pentacene interlayer-modulated resistive switching (RS) characteristics, the Au/pentacene/poly(methyl methacrylate) (PMMA)/heavily doped p-type Si (p+-Si)/In and Au/PMMA/p+-Si/In devices are fabricated and the device performance is provided. The Au/pentacene/PMMA/p+-Si/In device shows RS behavior, whereas the Au/PMMA/p+-Si/In device exhibits the set/reset–free hysteresis current–voltage characteristics. The insertion of a pentacene layer is a noticeable contribution to the RS characteristic. This is because of the occurrence of carrier accumulation/depletion in the pentacene interlayer. The transition from carrier depletion to carrier accumulation (carrier accumulation to carrier depletion) in pentacene occurring under negative (positive) voltage induces the process of set (reset). The switching conduction mechanism is primarily described as space charge limited conduction according to the electrical transport properties measurement. The concept of a pentacene/PMMA heterostructure opens a promising direction for organic memory devices.

The effect of H2O2 treatment on the surface properties of SiO2 is studied. H2O2 treatment leads to the formation of Si( OH)x at the SiO2 surface that serves to reduce the number of trap states, inducing the shift of the Fermi level toward the conduction band minimum. H2O2 treatment also leads to a noticeable reduction in the value of the SiO2 capacitance per unit area. The effect of SiO2 layers with H2O2 treatment on the behavior of carrier transports for the pentacene/SiO2–based organic thin-film transistor (OTFT) is also studied. Experimental identification confirms that the shift of the threshold voltage towards negative gate-source voltages is due to the reduced number of trap states in SiO2 near the pentacene/SiO2 interface. The existence of a hydrogenated layer between pentacene and SiO2 leads to a change in the pentacene-SiO2 interaction, increasing the value of the carrier mobility.

Three selenophene-incorporated quaterchalcogenophene-based donor–acceptor copolymers PFBT2Th2Se, PFBT2Se2Th, and PFBT4Se are designed and synthesized. To systematically fine-tune the molecular properties and investigate the chalcogen effect, PFBT2Th2Se and PFBT2Se2Th hybridize two thiophenes and two selenophenes as the donor with different isomeric main-chain placement while thiophene-free PFBT4Se uses quaterselenophene as the donor. On account of the selenophene’s advantageous features such as higher quinoidal population and higher molecular polarizability, the three polymers show good light-harvesting ability, strong intermolecular interactions, high crystallinity, and high charge mobilities. Bulk-heterojunction solar cells incorporating these selenophene-containing polymers have exhibited promising photovoltaic performance with impressive current densities over 20 mA/cm2. The device with the PFBT2Se2Th:PC71BM blend showed a PCE of 9.02% with a Jsc of 21.02 mA/cm2. In addition, the device using quaterse...

In this study, Mg–Al layered double hydride (LDH) was prepared and the impact of LDH addition on the biomass and surfactin yield for cultures of Bacillus subtilis CWS1 was examined. Various solid additives, including montmorillonite (MMT), activated carbon (AC) and LDH, were tested. Among these, LDH triggered the highest surfactin yield at 3789 mg/L. The optimal conditions for surfactin production were 2 g/L LDH supplied on the beginning of a 5-day cultivation, resulting in a 3.8-fold increase in yield. To reveal the mechanism of surfactin enhancement, observation was conducted via the optical microscope. The resulted images showed that when LDH was added, the cells became segmented, short and narrow compared to cells without any addition. It is apparent that LDH exhibits a slightly toxic effect, limiting cell growth. The surviving cells were forced to secrete more surfactin to protect themselves from the harsh environment. Since the cells could no longer grow, their only function was to secrete surfactin into the broth, leading to an extraordinarily high surfactin yield with a low biomass production. This suggests that an alternative means for efficient surfactin production is through the addition of LDH.

Polybrominated diphenyl ethers (PBDEs), commonly used as a flame retardants for industrial and commercial products, have a strong tendency to accumulate in the interface of water/soil/sediments and are difficult to biodegrade. An effective biological treatment for PBDE removal is needed. In this study, we investigated the use of 3 organic compost materials (BM-2, BM-6, and BP-2) to remove 20 mg kg−1 decabromodiphenyl ether (BDE-209) from contaminated sediment in anaerobic microcosms for 120 days and detected the bacterial community in samples. Organic substance of compost had sorption and biodegradation ability. BM-6 showed the highest sorption of BDE-209, at 38.95%, and BM-3 the highest biological activity, at 34.90%. Methylophilus spp., Pseudomonas spp., Clostridium spp., and Dehalococcoides sp. were identified in anaerobic microcosms with PBDE biodegradation. The pathway of anaerobic DBDE biodegradation from higher to lower brominated PBDE was identified by the appearance of PBDE biometabolites and functional genes related to reductive debromination. We have identified an effective approach for bioremediating PBDE-contaminated sediment by using organic compost; this approach is highly recommended for practical engineering for off-site remediation.

Production of staphylococcal enterotoxin A (SEA) and enterotoxin D (SED) by Staphylococcus warneri was first examined in three different media including brain heart infusion (BHI) broth, NZ-amine (NZA) medium, and 3 + 3 medium containing 3% NZ-amine A plus 3% Hy-Case Amino. Results of these investigations revealed that S. warneri produced the highest amount of SEA in BHI broth. SED yields were higher when BHI broth or NZA medium was used as the culture medium. On the other hand, SEA and SED production was found to be lowest in 3 + 3 medium. Further study showed that the optimum pH, for both SEA production and SED production was 7.0. Addition of 10% (wt/vol) sodium chloride to BHI broth reduced enterotoxin production by S. warneri . SEA production was reduced and SED production was completely inhibited in the presence of 15% (wt/vol) NaCl. Supplementation of the media with 0.4 or 1.5 mM magnesium sulfate markedly reduced SED production by S. warneri . Reduced production of both SEA and SED was also observed when BHI broth was supplemented with 0.1 M glucose or glycerol.

The growth and survival of Yersinia enterocolitica 0:3 and 0:8 were determined using Brain Heart Infusion Broth at pH 5.5 or 6.5, with 0, 250, 500, 1000, 1500, 2500, or 5000 ppm potassium sorbate, and incubated at 25 or 3°C. Results showed that Y. enterocolitica was susceptible to the antimicrobial activity of potassium sorbate. At 25°C and pH 5.5, a population increase of 6.8 and 6.9 log CFU/ml was noted for Y. enterocolitica serotypes 0:3 and 0:8, respectively, in broth without potassium sorbate. The presence of 1000-1500 ppm potassium sorbate in broth retarded the growth of the inoculated Y. enterocolitica cells or partially or completely inactivated them. At 25°C and pH 6.5, potassium sorbate at a concentration as high as 5000 ppm did not inactivate this pathogen. All the concentrations of potassium sorbate tested only retarded the growth of Y. enterocolitica . A 3°C and pH 5.5, Y. enterocolitica grew slightly in the control broth. The presence of 250-500 ppm or more potassium sorbate in broth completely inhibited the growth of Y. enterocolitica or reduced the number of viable cells. At 3°C and pH 6.5, a slight increase in the population of Y. enterocolitica was observed in the broth with or without potassium sorbate, but the increase slacked off as the amount of potassium sorbate was increased.

In this research, we developed six new selenophene-incorporated naphthobisthiadiazole-based donor-acceptor polymers PNT2Th2Se-OD, PNT2Se2Th-OD, PNT4Se-OD, PNT2Th2Se-DT, PNT2Se2Th-DT, and PNT4Se-DT. The structure-property relationships have been systematically established through the comparison of their structural variations: (1) isomeric biselenophene/bithiophene arrangement between PNT2Th2Se and PNT2Se2Th polymers, (2) biselenophene/bithiophene and quarterselenophene donor units between PNT2Th2Se/PNT2Se2Th and PNT4Se polymers, and (3) side-chain modification between the 2-octyldodecylthiophene (OD)- and 2-decyltetradecyl (DT)-series polymers. The incorporation of selenophene units in the copolymers induces stronger charge transfer to improve the light-harvesting capability while maintaining the strong intermolecular interactions to preserve the intrinsic crystallinity for high carrier mobility. The organic field-effect transistor device using PNT2Th2Se-OD achieved a high hole mobility of 0.36 cm2 V-1 s-1 with an on/off ratio of 1.9 × 105. The solar cells with PNT2Th2Se-OD:PC71BM exhibited a power conversion efficiency of 9.47% with a Voc of 0.68 V, an fill factor of 67%, and an impressive Jsc of 20.69 mA cm-2.

Graphene is impermeable to all molecules and has high chemical stability, which makes it an excellent anticorrosion coating for metals. However, current studies have indicated that galvanic coupling between graphene and a metal actually accelerates corrosion at the interface. Due to the insulating nature of polymers, graphene-polymer composite coatings with a strong interaction between the filler and the polymer matrix are an alternative means of addressing this issue. Nevertheless, such coatings require well-dispersed graphene flakes to lengthen the diffusion paths of gases or liquids, while preventing the formation of a conducting network from graphene to the metal. The difficulty in preparing such coatings was mainly due to problems with the control of the assembled phase during interfacial reactions. Herein, the interactions between the filler and the polymer were found to be a key factor governing anticorrosion performance, which has scarcely been previously reported. The advantage of graphene as a filler in anticorrosion coatings lies in its dispersibility and miscibility with both the casting solvent and the polymer. Electrochemically exfoliated graphene (EC-graphene) with appropriate surface functionalities that allow high miscibility with waterborne polyurethane (PU) and hydrophobic epoxy has been found to be an ideal filler that outperforms other graphene materials such as graphene oxide (GO) and reduced graphene oxide (rGO). Furthermore, a bilayer coating with EC-graphene additives for PU over epoxy has been found to reduce the corrosion rate (CR) to 1.81 × 10-5 mm per year. With a graphene loading of less than 1%, this represents the lowest CR ever achieved for copper and steel substrates and a diffusion coefficient that is lower by a factor of nearly 2.2 than that of the pristine polymer. Furthermore, we have shown that by controlling the amount of graphene loaded in the polymer galvanic corrosion favored by the formation of an interconnected graphene percolation network can successfully be limited. The present study, together with a facile and eco-friendly method of nanocomposite synthesis, may pave the way toward practical applications in the development of graphene-based anticorrosion coatings.

Ischemic stroke is the leading cause of disability and death worldwide. An effective therapeutic approach is urgently needed. Stroke-induced angiogenesis and neurogenesis are essential mechanisms in the long-term repair. Extracellular matrix proteins are also involved in tissue self-repair. Recently, a PHSRN (Pro-His-Ser-Arg-Asn) peptide from the fibronectin synergistic motif that can promote wound healing in epithelia and induce endothelial proliferation and cancer cell migration was identified. The therapeutic potential of this peptide in stroke is unknown. Here, we examined the potential of PHSRN in stroke therapy using an ischemic rat model of middle cerebral artery occlusion (MCAO). PHSRN reduced the infarct volume in MCAO rats, improved neurological function, and alleviated motor function impairment. PHSRN targeted the damaged brain region and distributed to endothelial cells after intraperitoneal injection. PHSRN significantly promoted angiogenesis and vascular endothelial growth factor secretion through activation of integrin α5β1 and its downstream intracellular signals, e.g., focal adhesion kinase, Ras, cRaf, and extracellular-signal-regulated kinase. PHSRN treatment also stimulated neurogenesis in MCAO rats, and maintained neuronal survival and neuronal morphologic complexity via induction of VEGF secretion. Together, these results provide insights into the role of integrin α5β1 following ischemia and support the feasibility of using PHSRN peptide in stroke therapy.

The effect of the modification of a gate SiO2 dielectric using an H2O2 solution on the temperature-dependent behavior of carrier transport for pentacene-based organic thin-film transistors (OTFTs) is studied. H2O2 treatment leads to the formation of Si(–OH)x (i.e., the formation of a hydroxylated layer) on the SiO2 surface that serves to reduce the SiO2 capacitance and weaken the pentacene–SiO2 interaction, thus increasing the field-effect carrier mobility (µ) in OTFTs. The temperature-dependent behavior of carrier transport is dominated by the multiple trapping model. Note that H2O2 treatment leads to a reduction in the activation energy. The increased value of µ is also attributed to the weakening of the interactions of the charge carriers with the SiO2 dielectric that serves to reduce the activation energy.

In this paper, the influence of the preparation temperature on the absorption coefficient and acoustic parameters of polyurethane was studied. Best sound absorption coefficient of polyurethane at high frequency is at 50℃, followed is 30℃ and 40℃,70℃ is lowest. Between 20~50℃, the flow resistance increased rapidly with the temperature increasing, the minimum flow resistance at 50℃, maximum value at 70℃.The trend of porosity with temperature is similar to that with flow resistance. With the temperature increasing, the porosity decreases first and then increases, minimum value at 50℃. Flow resistance dominating the flow resistance of the sound absorption performance.

The 2011 oil spill in the Bohai Sea was the largest spill event in China. Nine sediment cores were taken near the spill site and environmental factors including Polycyclic Aromatic Hydrocarbon (PAHs), oils, sulfides, organic carbon were measured 6 months later. Benthic foraminifera were separated into >150 mu m (large) and 63-150 mu m (small) size fractions for 2-cm depth interval of each sediment core. Statistical analyses suggested that the species composition of living foraminifera was impacted by oils, PAHs and sulfides. Large foraminifera were more sensitive to the oils than the small. Abnormal specimens were positively correlated with oils or PAHs. Small forms, however, tended to have high reproduction and mortality. Pollution-resistant and opportunistic taxa were identified to calculate a Foraminiferal Index of Environmental Impacts (FIEI). The FIEI increased from low to high oil-polluted station and from deep layer to surface sediment reflects the impact of oil pollution in this area. (C) 2015 The Authors. Published by Elsevier Ltd.

A tunable lens driven by a dielectric elastomer actuator is developed. A solution of NaCl was used as the deformable lens and one of the electrodes for applying a bias voltage across the actuator. The dielectric elastomer actuator was made of a curved polydimethylsiloxane (PDMS) thin film sandwiched between a gold electrode and the NaCl solution. When a bias voltage was applied, the electrostatic force induced a radial compression, causing a lateral deflection of the PDMS. The radius of the curvature of the NaCl lens was consequently changed. The variation of the focal length under different bias voltages was characterised separately using two different approaches, and consistent results were obtained. The lens diameter was 4 mm. The focus lens can be tuned from 16.1 to 13.1 mm when the bias voltage is increased from 0 to 900 V.

This study presents the development of a foundry available process scheme to implement and integrate MEMS devices on 12 inch wafer for the first time. After overcome various process challenges such as wafer warpage, bonding quality, etc., this study has successfully accomplished the bulk Si process scheme on 12 inch wafer. Accelerometer, resonators and Pirani gauges were fabricated and characterized to demonstrate the feasibility of the proposed process scheme. The vacuum condition of the sealed chambers was then monitored using the quality factor (detected by resonators) and the pressure (measured by Pirani gauges). This 12 inch MEMS process could facilitate the monolithic integration of devices with different vacuum requirements, a monolithically integrated silicon-based Pirani vacuum gauge to provide in situ pressure monitor is also demonstrated.

Matrix metalloproteinase-9 (MMP-9) appears to play an important role in acute skin inflammation. Subantimicrobial dose of tetracycline has been demonstrated to inhibit the activity of MMP-9 protein. However, long-term use tetracycline will induce side effect. The catalytic site of MMP-9 is located at zinc-binding amino acids, His401, His405 and His411. We attempted to search novel medicine formula as MMP-9 inhibitors from traditional Chinese medicine (TCM) database by using in silico studies. We utilized high-throughput virtual screening to find which natural compounds could bind to the zinc-binding site. The quantitative structure-activity relationship (QSAR) models, which constructed by scaffold of MMP-9 inhibitors and its activities, were employed to predict the bio-activity of the natural compounds for MMP-9. The results showed that Celacinnine, Lobelanidine and Celallocinnine were qualified to interact with zinc-binding site and displayed well predictive activity. We found that celallocinnine was the best TCM compound for zinc binging sites of MMP-9 because the stable interactions were observed under dynamic condition. In addition, Celacinnine and Lobelanidine could interact with MMP-9 related protein that identified by drug-target interaction network analysis. Thus, we suggested the herbs Hypericum patulum, Sedum acre, and Tripterygium wilfordii that containing Celallocinnine, Celacinnine and Lobelanidine might be a novel medicine formula to avoid the side effect of tetracycline and increase the efficacy of treatment.

Tear-film instability is widely believed to be a signature of eye health. When an interblink is prolonged, randomly distributed ruptures occur in the tear film. "Black spots" and/or "black streaks" appear in 15 to 40 s for normal individuals. For people who suffer from dry eye, tear-film breakup time (BUT) is typically less than a few seconds. To date, however, there is no satisfactory quantitative explanation for the origin of tear rupture. Recently, it was proposed that tear-film breakup is related to locally high evaporative thinning. A spatial variation in the thickness of the tear-film lipid layer (TFLL) may lead to locally elevated evaporation and subsequent tear-film breakup. We examine the local-evaporation-driven tear-film-rupture hypothesis in a one-dimensional (1-D) model for the evolution of a thin aqueous tear film overriding the cornea subject to locally elevated evaporation at its anterior surface and osmotic water influx at its posterior surface. Evaporation rate depends on mass transfer both through the coating lipid layer and through ambient air. We establish that evaporation-driven tear-film breakup can occur under normal conditions but only for higher aqueous evaporation rates. Predicted roles of environmental conditions, such as wind speed and relative humidity, on tear-film stability agree with clinical observations. More importantly, locally elevated evaporation leads to hyperosmolar spots in the tear film and, hence, vulnerability to epithelial irritation. In addition to evaporation rate, tear-film instability depends on the strength of healing flow from the neighboring region outside the breakup region, which is determined by the surface tension at the tear-film surface and by the repulsive thin-film disjoining pressure. This study provides a physically consistent and quantitative explanation for the formation of black streaks and spots in the human tear film during an interblink. © 2013 Elsevier B.V.

Alzheimer’s disease (AD) is caused by the hyperphosphorylation of Tau protein aggregation. FKBP52 (FK506 binding protein 52) has been found to inhibit Tau protein aggregation. This study found six different kinds of anthocyanins that have high binding potential. After analyzing the docking positions, hydrophobic interactions, and hydrogen bond interactions, several amino acids were identified that play important roles in protein and ligand interaction. The proteins’ variation is described using eigenvectors and the distance between the amino acids during a molecular dynamics simulation (MD). This study investigates the three loops based around Glu85, Tyr113, and Lys121—all of which are important in inducing FKBP52 activation. By performing a molecular dynamic simulation process between unbound proteins and the protein complex with FK506, it was found that ligand targets that docked onto the FK1 domain will decrease the distance between Glu85/Tyr113 and Glu85/Lys121. The FKBP52 structure variation may induce FKBP52 activation and inhibit Tau protein aggregation. The results indicate that anthocyanins might change the conformation of FKBP52 during binding. In addition, the purple anthocyanins, such as cyanidin-3-glucoside and malvidin-3-glucoside, might be better than FK506 in regulating FKBP52 and treating Alzheimer’s disease.

Polycrystalline ZnO thin films are prepared by the co-sputtering method under different oxygen partial pressures. Films deposited in pure argon gas exhibit ferromagnetism, whereas other films deposited under different oxygen partial pressures are diamagnetism. XPS results show the presence of Zn interstitial and oxygen vacancy in all of samples. Further analysis indicates that Zn interstitial may play an important role in triggering magnetic order on the undoped ZnO thin films by inducing an alteration of electronic configuration.

Cognitive repair by insulin-like growth factor-I (IGF-I) through activation of insulin-like growth factor-I receptor (IGF-IR) is well established, but not used for clinical therapy due to its link to cancer. We hypothesize that IGF-IR activation rather than IGF-I per se may be essential for cognitive repair and attempted to identify ligands from traditional Chinese medicine (TCM) with drug-like potential towards IGF-IR. TCM ligands, 3-(2-carboxyphenyl)-4(3H)-quinazolinone from Isatisin digotica, (+)-N-methyllaurotetanine from Lindera aggregate, and (+)-1(R)-Coclaurine from Nelumbonucifera Gaertn, exhibited high binding affinities and good blood brain barrier (BBB) penetration crucial for accessing IGF-IR. Stable complex formation of the candidates was observed during molecular dynamics (MD) simulation. Interactions with Leu975 and Gly1055 or Asp1056 were important for ligand binding. Amino acid distance analysis revealed residues 974/975, 984-986, 996-1006, 1040-1056, and 1122-1135 as "hotspots" for ligand binding in IGF-IR. Versatile entry pathways for the TCM candidates suggest high accessibility to the binding site. Blockage of the binding site opening by the TCM candidates limits binding site access by other compounds. Multiple linear regression (R² = 0.9715), support vector machine (R² = 0.9084), Bayesian network (R² =0.8233) comparative molecular field analysis (CoMFA, R² = 0.9941), and comparative molecular similarity indices analysis (CoMSIA, R² = 0.9877) models consistently suggest that the TCM candidates might exert bioactivity on IGF-IR. Contour of representative MD conformations to CoMFA and CoMSIA maps exhibits similar results. Properties including BBB passage, evidence of ability to form stable complexes with IGF-IR by MD simulation, and predicted bioactivity suggest that the TCM candidates have drug-like properties and might have potential as cognitive-enhancing drugs.

Soft conductive elastomer materials have wide potential applications in material science and electronic engineering. Through electrospinning and in-situ polymerization, a kind of well-organized coaxial polyaniline/polyvinylidence fluoride (PANI/PVDF) microfibers with conductivity about 0.6 S/cm were fabricated, which combined the advantages of conducting polymer and elastic material. It is found that the resistance of the fibers was changed with the curvature variation. The results indicate that the PANI/PVDF microfibers could be used as strain sensor with high flexibility, high sensitivity, and stable repeatability.

Silent information regulator 1 (Sirt1), a class III nicotinamide adenine dinucleotide dependent histone deacetylases, is important in cardioprotection, neuroprotection, metabolic disease, calorie restriction, and diseases associated with aging. Traditional Chinese Medicine (TCM) compounds from TCM Database@Taiwan ( http://tcm.cmu.edu.tw/ ) were employed for screening potent Sirt1 agonists, and molecular dynamics (MD) simulation was implemented to simulate ligand optimum docking poses and protein structure under dynamic conditions. TCM compounds such as (S)-tryptophan-betaxanthin, 5-O-feruloylquinic acid, and RosA exhibited good binding affinity across different computational methods, and their drug-like potential were validated by MD simulation. Docking poses indicate that the carboxylic group of the three candidates generated H-bonds with residues in the protein chain from Ser441 to Lys444 and formed H-bond, π-cation interactions, or hydrophobic contacts with Phe297 and key active residue, His363. During MD, stable π-cation interactions with residues Phe273 or Arg274 were formed by (S)-tryptophan-betaxanthin and RosA. All candidates were anchored to His363 by stable π- or H-bonds. Hence, we propose (S)-tryptophan-betaxanthin, 5-O-feruloylquinic acid, and RosA as potential lead compounds that can be further tested in drug development process for diseases associated with aging An animated interactive 3D complement (I3DC) is available in Proteopedia at http://proteopedia.org/w/Journal:JBSD:28.

Although neoadjuvant chemotherapy has improved the survival rate of osteosarcoma patients, drug resistance remains a predominant obstacle to improving efficacy and necessitates the development of novel chemotherapeutical agents. The aim of this study was to investigate whether tetrandrine (TET) induces apoptosis in the U-2OS and MG-63 osteosarcoma cell lines and to further determine the under- lying mechanism. This study investigated the effects of TET on osteosarcoma in vitro. To examine the antitumor effects of TET on osteosarcoma, the two osteosarcoma cell lines were treated with TET and subjected to apoptosis assays. The results revealed that TET induced the apoptosis of osteosarcoma cells in a time- and dose-dependent manner. Furthermore, the apoptosis of osteosarcoma cells was accompanied by increased cytochrome c (Cyto-C), apoptotic protease-activating factor (Apaf)-1, Bid and Bax activation and reduced Bcl-2 and Bcl-xl activation, demonstrating that the apoptosis may have occurred through the mitochondrial pathway. In conclusion, the results suggest that TET is a promising agent for osteosarcoma therapy.