Search

Because of the high heterogeneity of breast cancer outcome, identification of novel prognostic biomarkers is critical to improve patient stratification and guide precise treatment. We examined the prognostic value of gamma-interferon-inducible lysosomal thiol reductase (GILT) expression in a training set of 416 breast cancer patients and a validation set of 210 patients, and performed functional studies to investigate the functions and underlying mechanisms of GILT on breast cancer prognosis. Our results indicated that high GILT expression in breast cancer cells was associated with improved disease-free survival (DFS; hazard ratio [HR] = 0.189, 95% confidence interval [CI]: 0.099-0.361) and breast cancer-specific survival (BCSS; HR = 0.187, 95% CI: 0.080-0.437) of breast cancer patients both in the training set and the external validation set (HR = 0.453, 95% CI: 0.235-0.873 for DFS, HR = 0.488, 95% CI: 0.245-0.970 for BCSS). In vitro and in vivo studies showed that GILT overexpression inhibited breast cancer cells proliferation, invasion, migration and tumor formation in nude mice and increased sensitivity of breast cancer cells to standard treatment. Proteomics analysis indicated that GILT inhibited reactive oxygen species (ROS) and autophagy activation in breast cancer cells, and GILT overexpression-mediated tumor growth was further enhanced in the presence of autophagy or ROS inhibitors. Our results demonstrate that GILT expression can be effectively used to predict the prognosis and guide treatment strategies of breast cancer patients.

A single-atom Pt1 /CeO2 catalyst formed by atom trapping (AT, 800 °C in air) shows excellent thermal stability but is inactive for CO oxidation at low temperatures owing to over-stabilization of Pt2+ in a highly symmetric square-planar Pt1 O4 coordination environment. Reductive activation to form Pt nanoparticles (NPs) results in enhanced activity; however, the NPs are easily oxidized, leading to drastic activity loss. Herein we show that tailoring the local environment of isolated Pt2+ by thermal-shock (TS) synthesis leads to a highly active and thermally stable Pt1 /CeO2 catalyst. Ultrafast shockwaves (>1200 °C) in an inert atmosphere induced surface reconstruction of CeO2 to generate Pt single atoms in an asymmetric Pt1 O4 configuration. Owing to this unique coordination, Pt1 δ+ in a partially reduced state dynamically evolves during CO oxidation, resulting in exceptional low-temperature performance. CO oxidation reactivity on the Pt1 /CeO2 _TS catalyst was retained under oxidizing conditions.

Oxygen redox plays a prominent role in enhancing the energy density of Mn-based layered cathodes. However, understanding the factors affecting the reversibility of oxygen redox is nontrivial due to the complicated concurrent structural and chemical transformations. Herein, we show that local Mn‒O symmetry induced structural and chemical evolutions majorly dictate the reversibility of oxygen redox of NaxLiyMn1-yO2 in Na cells. We find that NaxLi­yMn1-yO2 with Jahn-Teller distorted MnO6 octahedra undergoes severe Mn dissolution during cycling, which destabilizes the transition metal layer resulting in poor Li retention and irreversible oxygen redox. Jahn-Teller distortion of MnO6 octahedra can be suppressed by modulating the local charge of Mn and Mn‒O distance through Mg/Ti dual doping. This leads to reduced Mn dissolution resulting in more reversible oxygen redox. Such stabilization significantly improves the electrochemical performance of Mg/Ti dual doped NaxLiyMn1-yO2. Through this work, we show that promoting reversible oxygen redox can benefit from structural stabilization at local length scale, and that modifying the chemical environment through doping chemistry is an efficient strategy to promote local structural stability and thus, oxygen redox.

ConspectusThe redox reaction pathway is crucial to the sustainable production of the fuels and chemicals required for a carbon-neutral society. Our society is becoming increasingly dependent on devices using batteries and electrolyzers, all of which rely on a series of redox reactions. The overall properties of oxide materials make them very well suited for such electrochemical and catalytic applications due to their associated cationic redox properties and the static site-adsorbate interactions. As these technologies have matured, it has become apparent that defect-driven redox reactions, defect-coupled diffusion, and structural transformations that are both time- and rate-dependent are also critical materials processes. This change in focus, considering not only redox properties but also more complex, dynamic behaviors, represents a new research frontier in the molecular sciences as they are strongly linked to device operation and degradation and lie at the heart of various phenomena that take place at electrochemical interfaces. Fundamental studies of the structural, electronic, and chemical transformation mechanisms are key to the advancement of materials and technological innovations that could be implemented in various electrochemical systems.In this Account, we focus on recent studies and advances in characterizing and understanding the dynamic redox evolution and structural transformations that take place in model perovskites and layered oxides under reactive conditions and correlate them with degradation mechanisms and operations in electrolyzers and batteries. We show that the dynamic evolution of oxygen vacancies and cationic migration in the surface or bulk occurs at the solid-liquid interface, using a combination of different synchrotron-based X-ray spectroscopies and scattering probes. Detailed redox-structure-reactivity correlation studies show how defects and diffusion processes can be tailored to drive various physical and chemical transformations in electrolyzers and batteries. We also highlight a strong correlation between oxygen redox reactivity and structural reorganization in both model thin films and particles, helping to bridge the gap between fundamental studies of the reaction mechanism and device applications. On the basis of these findings, we discuss strategies to probe and tune the redox reactivity and structural stability of the redox-active oxide interphase toward devising efficient pathways for energy and chemical harvesting.

P2-structured Na0.67Ni0.33Mn0.67O2 (PNNMO) is a promising Na-ion battery cathode material, but its rapid capacity decay during cycling remains a hurdle. Li doping in layered transition-metal oxide (TMO) cathode materials is known to enhance their electrochemical properties. Nevertheless, the influence of Li at different locations in the structure has not been investigated. Here, the crystallographic role and electrochemical impact of lithium on different sites in PNNMO is investigated in Li x Na0.67-y Ni0.33Mn0.67O2+δ (0.00 ≤ x ≤ 0.2, y = 0, 0.1). Lithium occupancy on prismatic Na sites is promoted in Na-deficient (Na < 0.67) PNNMO, evidenced by ex situ and operando synchrotron X-ray diffraction, X-ray absorption spectroscopy, and 7Li solid-state nuclear magnetic resonance. Partial substitution of Na with Li leads to enhanced stability and slightly increased specific capacity compared to PNNMO. In contrast, when lithium is located primarily on octahedral TM sites, capacity is increased but at the cost of stability.

Enzyme-catalyzed cascade reactions have attracted an increasing attention with many advantages, such as environmental protection, high efficiency and no need for intermediate purification. The present overview has summarized enzymatic cascade benefit systems, including double-enzyme, multi-enzyme, and chemical-enzyme catalytic one-pot reactions. With the continuous developments in protein engineering, metabolic engineering, synthetic biology and systems biocatalysis, multi-step biotransformations will expand the scope of application, as well as enhance the biocatalytic efficiency.

Bioorthogonal catalysis mediated by transition metals has inspired a new subfield of artificial chemistry complementary to enzymatic reactions, enabling the selective labelling of biomolecules or in situ synthesis of bioactive agents via non-natural processes. However, the effective deployment of bioorthogonal catalysis in vivo remains challenging, mired by the safety concerns of metal toxicity or complicated procedures to administer catalysts. Here, we describe a bioorthogonal catalytic device comprising a microneedle array patch integrated with Pd nanoparticles deposited on TiO2 nanosheets. This device is robust and removable, and can mediate the local conversion of caged substrates into their active states in high-level living systems. In particular, we show that such a patch can promote the activation of a prodrug at subcutaneous tumour sites, restoring its parent drug's therapeutic anticancer properties. This in situ applied device potentiates local treatment efficacy and eliminates off-target prodrug activation and dose-dependent side effects in healthy organs or distant tissues.

Fe-N-C with atomically dispersed Fe single atoms is the most promising candidate to replace platinum for the oxygen reduction reaction (ORR) in fuel cells. However, the conventional synthesis procedures require quantities solvents and metal precursors, sluggish adsorption process, and tedious washing, resulting in limited metal doping and uneconomical for large-scale production. For the first time, Fe2O3 is adopted as the Fe precursor to derive abundant single Fe atoms dispersed on carbon surfaces. The Fe-N-C catalyst synthesized by this simple method shows an excellent ORR activity with half-wave potentials of 0.82 and 0.90 V in acidic and alkaline solutions, respectively. A single fuel cell with an optimized Fe-N-C cathode shows a high peak power density of 0.84 W cm-2. The solid-state transformation synthesis method developed in this study may shed light on mass production of single-atom-based catalysts.

Although liquid mercury (Hg) has been known since antiquity, the formation of stable solid nano forms of Hg at room temperature has not been reported so far. Here, for the first time, we report a simple sonochemical route to obtain solid mercury nanoparticles, stabilized by reduced graphene oxide at ambient conditions. The as-formed solid Hg nanoparticles were found to exhibit remarkable rhombohedral morphology and crystallinity at room temperature. Extensive characterization using various physicochemical techniques revealed the unique properties of the solid nanoparticles of Hg compared to its bulk liquid metal phase. Furthermore, the solid nature of the Hg nanoparticles was studied electrochemically, revealing distinctive properties. We believe that solid Hg nanoparticles have the potential for important applications in the fields of electroanalytical chemistry and electrocatalysis., Formation of the stable solid mercury nanoparticles by acoustic cavitation and their electrochemical activity compared to its bulk liquid metal.

The Hf(OTf)4-catalyzed three-component reaction (3CR) was employed as a powerful tool for facile access to a library of 23 pyrimido[2,1-b][1,3]benzothiazole (PBT)-based AIEgens with full-color tunability, solid-state fluorescence quantum yields of up to 86.8%, and high crystallizability. As atypical propeller-shaped molecules, PBT AIEgens were experimentally determined to dissipate the energy of the excited state via the rotation of the exocyclic carbonyl (ester/ketone) rather than the commonly known phenyl group. Theoretical calculations and crystallographic analysis of PBT AIEgens provide insights into their unique structure–property relationships and AIE mechanism from orbital and molecular aspects, respectively.

Lithium–sulfur batteries are attractive alternatives to lithium-ion batteries because of their high theoretical specific energy and natural abundance of sulfur. However, the practical specific energy and cycle life of Li–S pouch cells are significantly limited by the use of thin sulfur electrodes, flooded electrolytes and Li metal degradation. Here we propose a cathode design concept to achieve good Li–S pouch cell performances. The cathode is composed of uniformly embedded ZnS nanoparticles and Co–N–C single-atom catalyst to form double-end binding sites inside a highly oriented macroporous host, which can effectively immobilize and catalytically convert polysulfide intermediates during cycling, thus eliminating the shuttle effect and lithium metal corrosion. The ordered macropores enhance ionic transport under high sulfur loading by forming sufficient triple-phase boundaries between catalyst, conductive support and electrolyte. This design prevents the formation of inactive sulfur (dead sulfur). Our cathode structure shows improved performances in a pouch cell configuration under high sulfur loading and lean electrolyte operation. A 1-A-h-level pouch cell with only 100% lithium excess can deliver a cell specific energy of >300 W h kg−1 with a Coulombic efficiency >95% for 80 cycles. The shuttling effect in Li–S batteries can be drastically suppressed by using a single-atom Co catalyst and polar ZnS nanoparticles embedded in a macroporous conductive matrix as a cathode. Using this strategy, Li–S pouch cells show stable cycling and high energy performances.

While X-ray crystallography routinely provides structural characterization of kinetically stable pre-catalysts and intermediates, elucidation of the structures of transient reactive intermediates, which are intimately engaged in bond-breaking and -making during catalysis, is generally not possible. Here, we demonstrate in crystallo synthesis of Rh2 nitrenoids that participate in catalytic C-H amination, and we characterize these transient intermediates as triplet adducts of Rh2. Further, we observe the impact of coordinating substrate, which is present in excess during catalysis, on the structure of transient Rh2 nitrenoids. By providing structural characterization of authentic C-H functionalization intermediates, and not kinetically stabilized model complexes, these experiments provide the opportunity to define critical structure-activity relationships.

Achieving stable, low-cost electrocatalysts represents a daunting challenge towards practical water oxidation reactions. Here, we report that a degraded electrocatalyst can be revivified under catalytic operating conditions by manipulating reversible phase segregation. Under the oxygen evolution reaction conditions, Fe segregation develops in the Ni–Fe hydroxide host lattice, with the formation of FeOOH, resulting in an interface between the FeOOH and the host lattice. A dynamic metal dissolution–redeposition process accelerates the Fe segregation and formation of the FeOOH secondary phase, resulting in catalyst deactivation. Operando synchrotron spectroscopic and microscopic analyses suggest that the phase segregation is reversible between the water oxidation potential and the catalyst reduction potential. Therefore, we have developed an intermittent reduction methodology to revivify the catalytic activity under the operating conditions, enhancing catalyst durability. The present study highlights that tailoring phase segregation at the catalyst/electrolyte interface constitutes an important strategy for revivifying and stabilizing catalytic activity. Achieving long-term stability of water oxidation electrocatalysts remains a formidable challenge. Now, an in situ electrochemical reduction strategy to revivify mixed Ni–Fe hydroxide catalysts by reversible phase segregation is presented.

The further improvement of sodium ion batteries requires the elucidation of the mechanisms pertaining to reversibility, which allows the novel design of the electrode structure. Here, through a hydrogel-embedding method, we are able to confine the growth of few-layer SnS2 nanosheets between a nitrogen- and sulfur-doped carbon nanotube (NS-CNT) and amorphous carbon. The obtained carbon-sandwiched SnS2 nanosheets demonstrate excellent sodium storage properties. In operando small-angle X-ray scattering combined with the ex situ X-ray absorption near edge spectra reveal that the redox reactions between SnS2/NS-CNT and the sodium ion are highly reversible. On the contrary, the nanostructure evolution is found to be irreversible, in which the SnS2 nanosheets collapse, followed by the regeneration of SnS2 nanoparticles. This work provides operando insights into the chemical environment evolution and structure change of SnS2-based anodes, elucidating its reversible reaction mechanism, and illustrates the significance of engineered carbon support in ensuring the electrode structure stability.

To reveal the formation and evolution behavior of inclusions during magnesium treatment and resulfurization in Al-killed free-cutting steel, both laboratory experiments and thermodynamic calculations were carried out. The extracted samples were polished and analyzed by scanning electron microscopy and energy-dispersive spectroscopy. The results indicated that MgO formed immediately and then transferred to MgO·Al2O3 with the homogenization of [Mg] in steel in the case of low magnesium addition (w[Mg]

The enantioselective ketimine-ene reaction is one of the most challenging stereocontrolled reaction types in organic synthesis. In this work, catalytic enantioselective ketimine-ene reactions of 2-aryl-3H-indol-3-ones with α-methylstyrenes were achieved by utilizing a B(C6 F5 )3 /chiral phosphoric acid (CPA) catalyst. These ketimine-ene reactions proceed well with low catalyst loading (B(C6 F5 )3 /CPA=2 mol %/2 mol %) under mild conditions, providing rapid and facile access to a series of functionalized 2-allyl-indolin-3-ones with very good reactivity (up to 99 % yield) and excellent enantioselectivity (up to 99 % ee). Theoretical calculations reveal that enhancement of the acidity of the chiral phosphoric acid by B(C6 F5 )3 significantly reduces the activation free energy barrier. Furthermore, collective favorable hydrogen-bonding interactions, especially the enhanced N-H⋅⋅⋅O hydrogen-bonding interaction, differentiates the free energy of the transition states of CPA and B(C6 F5 )3 /CPA, thereby inducing the improvement of stereoselectivity.

Non-platinum group metal (non-PGM) electrocatalysts for the oxygen reduction reaction (ORR) are generally composed of iron, nitrogen, and carbon synthesized through high-temperature pyrolysis. Among the various types of precursors, metal-organic frameworks (MOFs), zeolitic imidazolate framework (ZIF)-8 in particular, have often been used in the synthesis. The pyrolysis of ZIF-8 precursor relies on the use of Zn as a sacrificial metal (SM), and the optimal processing temperatures often exceed 1000 °C to generate active non-PGM catalysts. The high pyrolysis temperature tends to result in heterogeneous active moieties ranging from Fe single atoms to nanoparticles. In this study, we present the synthesis of non-PGM catalysts using Cd as the sacrificial metal instead of Zn. By using Cd, we were able to generate active non-PGM electrocatalysts from the MOF precursors at a low pyrolysis temperature of 750 °C, which helps preserve the single atomic iron active sites.

A central theme of nanocrystal (NC) research involves synthesis of dimension-controlled NCs and studyof size-dependent scaling laws governing their optical, electrical, magnetic, and thermodynamic properties. Here, we describe the synthesis of monodisperse CdO NCs that exhibit high quality-factor (up to 5.5) mid-infrared (MIR) localized surface plasmon resonances (LSPR) and elucidate the inverse scaling relationship between carrier concentration and NC size. The LSPR wavelength is readily tunable between 2.4 and ∼6.0 μm by controlling the size of CdO NCs. Structural and spectroscopic characterization provide strong evidence that free electrons primarily originate from self-doping due to NC surface-induced nonstoichiometry. The ability to probe and to control NC stoichiometry and intrinsic defects will pave the way toward predictive synthesis of doped NCs with desirable LSPR characteristics.

Nickel-iron layered double hydroxide (NiFe LDH) is a promising oxygen evolution reaction (OER) electrocatalyst under alkaline conditions. Much research has been performed to understand the structure-activity relationship of NiFe LDH under OER conditions. However, the specific role of the Fe species remains unclear and under debate. Herein, based on DFT calculations, it was discovered that the edge Fe sites show higher activity towards OER than either the edge Ni sites or lattice sites. Therefore, a facile acid-etching method was proposed to controllably induce the formation of edge Fe sites in NiFe LDH, and the obtained sample exhibited higher OER activity. X-ray absorption near edge structure and extended X-ray absorption fine structure analyses further revealed that the interaction of the edge Fe species with Ni is believed to contribute to the enhancement of the OER performance. This work provides a new understanding of the structure-activity relationship in NiFe LDH and offers a facile method for the design of efficient electrocatalysts in an alkaline environment.

The methane activation and methane dry reforming reactions were studied and compared over 4 wt % Ni/CeO2 and 4 wt % Ni/CeZrO2 (containing 20 wt % Zr) catalysts. Upon the incorporation of Zr into th...

Titanium-based layered oxides (TLOs) are one of the most promising electrode material families for sodium-ion batteries (NIBs) due to their smooth charge/discharge profiles and excellent cycle performance. However, the reaction mechanism of these materials, especially the reason for the disappearance of multiple voltage plateaus, is still not clear. Herein, two representative TLOs (Na2/3Ni1/3Ti2/3O2 and Na2/3Co1/3Ti2/3O2) with the same P2 crystal structure have been studied to scrutinize those unexplained issues. In situ synchrotron high-energy X-ray diffraction revealed a solid solution reaction mechanism for both, suggesting the absence of rigid phase transitions upon electrochemical cycling. An interesting “spring effect” of the TiO6 octahedron, i.e., the reversible vibration of the central Ti atom inside the local octahedron upon electrochemical redox, was demonstrated by advanced X-ray absorption spectroscopy and theoretical calculations. Such an effect could suppress the rigid phase transitions, and result in smooth charge/discharge profiles and enhanced cycle stability. This work not only accounts for the disappearance of multiple voltage plateaus of TLOs for NIBs, but also provides an effective local-structure viewpoint to increase the cycle stability of electrode materials for other advanced battery systems.

To understand the effect of selenium doping on the good cycling performance and rate capability of a Ge0.9Se0.1 electrode, the dynamic morphological and phase changes of the Ge0.9Se0.1 electrode were investigated by synchrotron-based operando transmission X-ray microscopy (TXM) imaging, X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). The TXM results show that the Ge0.9Se0.1 particle retains its original shape after a large volume change induced by (de)lithiation and undergoes a more sudden morphological and optical density change than pure Ge. The difference between Ge0.9Se0.1 and Ge is attributed to a super-ionically conductive Li–Se–Ge network formed inside Ge0.9Se0.1 particles, which contributes to fast Li-ion pathways into the particle and nano-structuring of Ge as well as buffering the volume change of Ge. The XRD and XAS results confirm the formation of a Li–Se–Ge network and reveal that the Li–Se–Ge phase forms during the early stages of lithiation and is an inactive phase. The Li–Se–Ge network also can suppress the formation of the crystalline Li15Ge4 phase. These in situ and operando results reveal the effect of the in situ formed, super-ionically conductive, and inactive network on the cycling performance of Li-ion batteries and shed light on the design of high capacity electrode materials.

Enhancing the oxygen evolution reaction (OER) performance of NiO materials will greatly expand their applications as low-cost, bifunctional electrocatalysts for water splitting reactions. Introducing stress into the surface layer of catalysts represents an effective method to enhance their catalytic reactivity. Herein, we create compressive stress at the NiOOH/NiO interface using the battery conversion chemistry and in situ Ni to NiOOH transformation. As a result, the OER performance is enhanced by 20 fold compared with that of pure NiO. However, due to the corrosive environment that the electrocatalyst experiences under OER conditions, the stress is released after several CV cycles. The present study demonstrates the importance of interfacial stress that can be produced from in situ surface phase transformation of the electrocatalyst, as well as highlights the challenge of maintaining the mechanical stress under OER conditions during long-term applications.

Atomic-level understanding of the active sites and transformation mechanisms under realistic working conditions is a prerequisite for rational design of high-performance photocatalysts. Here, by using correlated scanning fluorescence X-ray microscopy and environmental transmission electron microscopy at atmospheric pressure, in operando, we directly observe that the (110) facet of a single Cu2O photocatalyst particle is photocatalytically active for CO2 reduction to methanol while the (100) facet is inert. The oxidation state of the active sites changes from Cu(i) towards Cu(ii) due to CO2 and H2O co-adsorption and changes back to Cu(i) after CO2 conversion under visible light illumination. The Cu2O photocatalyst oxidizes water as it reduces CO2. Concomitantly, the crystal lattice expands due to CO2 adsorption then reverts after CO2 conversion. The internal quantum yield for unassisted wireless photocatalytic reduction of CO2 to methanol using Cu2O crystals is ~72%. Photocatalytic reduction of CO2 to methanol offers a promising route to storage of solar energy in the form of chemical fuels. Here, Wu et al. use in operando microscopy to identify the active facets for CO2 reduction on Cu2O and exploit this to obtain high conversion efficiency and selectivity to methanol.

Developing stable cathode materials represents a crucial step toward long-life sodium-ion batteries. P2-type layered oxides are important as cathodes for their reversibility, but their long-term pe...

The surface of an electrocatalyst undergoes dynamic chemical and structural transformations under electrochemical operating conditions. There is a dynamic exchange of metal cations between the electrocatalyst and electrolyte. Understanding how iron in the electrolyte gets incorporated in the nickel hydroxide electrocatalyst is critical for pinpointing the roles of Fe during water oxidation. Here, we report that iron incorporation and oxygen evolution reaction (OER) are highly coupled, especially at high working potentials. The iron incorporation rate is much higher at OER potentials than that at the OER dormant state (low potentials). At OER potentials, iron incorporation favors electrochemically more reactive edge sites, as visualized by synchrotron X-ray fluorescence microscopy. Using X-ray absorption spectroscopy and density functional theory calculations, we show that Fe incorporation can suppress the oxidation of Ni and enhance the Ni reducibility, leading to improved OER catalytic activity. Our findings provide a holistic approach to understanding and tailoring Fe incorporation dynamics across the electrocatalyst-electrolyte interface, thus controlling catalytic processes.

Proton exchange membrane fuel cell converts hydrogen and oxygen into electricity with zero emission1. The high cost and low durability of Pt-based electrocatalysts for oxygen reduction reaction hinder its wide applications2,3. The development of non-precious metal electrocatalysts also reaches the bottleneck because of the low activity and durability4,5. Here we rationally design a hybrid electrocatalyst consisting of atomically dispersed Pt and Fe single atoms and intermetallic PtFe alloy nanoparticles. The Pt mass activity of the hybrid catalyst is 3.5 times higher than that of commercial Pt/C in a fuel cell. More importantly, the fuel cell with an ultra-low Pt loading in the cathode (0.015 mgPt cm-2) shows unprecedented durability, with 93.6% activity retention after 100,000 cycles and no noticeable current drop at 0.6 V for at least 206 h. These results highlight the importance of the synergistic effects among active sites in hybrid electrocatalysts and provide an alternative way to design more active and durable low-Pt electrocatalysts for electrochemical devices.

Peptidoglycan recognition proteins (PGRPs) are a family of pattern recognition receptors (PRRs) mediating the recognition of peptidoglycan. In the present study, a short-type PGRP gene named Eco-PGRP-S was identified in the orange-spotted grouper (Epinephelus coioides), a major commercial marine fish cultured in Asia. Eco-PGRP-S gene was constitutively expressed in all tissues examined, with the highest expression level observed in gill and skin. As a typical PRR, Eco-PGRP-S is inducible following the stimulation of peptidoglycan, and has an ability to bind peptidoglycan. Importantly, Eco-PGRP-S has been proven to have Zn2+-dependent amidase activity and direct antibacterial activity against Vibrio Harveri and Edwardsiella tarda. In addition, Eco-PGRP-S is mainly localized in cytoplasm and nucleus, and is able to significantly trigger the activation of NF-κB signalling. The present research thus contributes to a better understanding of the molecular mechanism of antibacterial defense and the containment of infectious bacterial diseases in grouper.

Zinc-blende CdS nanoplatelets with atomically flat and very large {100} basal planes terminated solely by one type of element (either Cd or S atoms) are synthesized. Optical spectroscopy, X-ray diffraction, X-ray absorption, and transmission electron microscopy confirm that the surface structures of newly developed S-terminated CdS nanoplatelets are at least as well-defined as the original Cd-terminated nanoplatelets. Band gaps of the nanoplatelets are found to depend on not only the quantum-confined dimension (thickness) but also the nature of the surface termination. The facet structure dictates the packing of the ligands (carboxylate for Cd-terminated nanoplatelets and alkyl for S-terminated nanoplatelets), which causes a difference in the lattice strain and significantly affects the optical spectral width. Experimental and theoretical results reveal that engineering the exciton spatial distribution by the tailored synthesis of semiconductor nanocrystals with a precisely controlled surface structure is fully possible, which should open a new door for delivering the long-promised potential of semiconductor nanocrystals.

Improving the reaction kinetics of hydrogen evolution and oxidation reactions (HER/HOR) in alkaline media is critical to promote the development of alkaline fuel cells and electrolyzers. Here, we p...

Iron and nitrogen co-doped carbon (Fe-N-C) catalysts hold great promise to replace platinum group metal used for the oxygen reduction reaction (ORR) in low-temperature fuel cells. However, general synthesis routes require tedious acid washing and extensive heat treatment, usually resulting in uncontrollable morphologies and undesirable compounds. In this work, a zeolitic imidazolate framework (ZIF-8) was employed as a self-template for one-pot synthesis of a Fe-N-C catalyst consisting of uniformly dispersed Fe single atoms. Atomically dispersed Fe atoms were well distributed along the edges of the porous carbon matrix. Each of the Fe atoms was coordinated with four N atoms in the plane and two O atoms in the axial direction. The optimized Fe-N-C catalyst showed excellent ORR activities with half-wave potentials of 0.81 and 0.90 V in acidic and alkaline solutions, respectively. The results may be important for the optimization of single-atom-based catalysts for various reactions.

The use of 'water-in-salt' electrolytes has considerably expanded the electrochemical window of aqueous lithium-ion batteries to 3 to 4 volts, making it possible to couple high-voltage cathodes with low-potential graphite anodes1-4. However, the limited lithium intercalation capacities (less than 200 milliampere-hours per gram) of typical transition-metal-oxide cathodes5,6 preclude higher energy densities. Partial7,8 or exclusive9 anionic redox reactions may achieve higher capacity, but at the expense of reversibility. Here we report a halogen conversion-intercalation chemistry in graphite that produces composite electrodes with a capacity of 243 milliampere-hours per gram (for the total weight of the electrode) at an average potential of 4.2 volts versus Li/Li+. Experimental characterization and modelling attribute this high specific capacity to a densely packed stage-I graphite intercalation compound, C3.5[Br0.5Cl0.5], which can form reversibly in water-in-bisalt electrolyte. By coupling this cathode with a passivated graphite anode, we create a 4-volt-class aqueous Li-ion full cell with an energy density of 460 watt-hours per kilogram of total composite electrode and about 100 per cent Coulombic efficiency. This anion conversion-intercalation mechanism combines the high energy densities of the conversion reactions, the excellent reversibility of the intercalation mechanism and the improved safety of aqueous batteries.

Batteries with conversion-type electrodes exhibit higher energy storage density but suffer much severer capacity fading than those with the intercalation-type electrodes. The capacity fading has been considered as the result of contact failure between the active material and the current collector, or the breakdown of solid electrolyte interphase layer. Here, using a combination of synchrotron X-ray absorption spectroscopy and in situ transmission electron microscopy, we investigate the capacity fading issue of conversion-type materials by studying phase evolution of iron oxide composited structure during later-stage cycles, which is found completely different from its initial lithiation. The accumulative internal passivation phase and the surface layer over cycling enforce a rate−limiting diffusion barrier for the electron transport, which is responsible for the capacity degradation and poor rate capability. This work directly links the performance with the microscopic phase evolution in cycled electrode materials and provides insights into designing conversion-type electrode materials for applications., Conversion electrodes possess high energy density but suffer a rapid capacity loss over cycling compared to their intercalation equivalents. Here the authors reveal the microscopic origin of the fading behavior, showing that the formation and augmentation of passivation layers are responsible.

Purpose Results of some epidemiological studies suggest that moderate alcohol consumption may be associated with a decreased risk to develop NAFLD. Here, the effect of the consumption of moderate beer and diluted ethanol, respectively, on the development of NAFLD were assessed. Methods Female C57BL/6J mice were fed a control diet (C-D) or a diet rich in fructose, fat and cholesterol (FFC) enriched isocalorically and isoalcoholically with beer (FFC + B) or plain ethanol (FFC + E) (2.5 g ethanol/kg body weight/day) for 7 weeks. Liver damage was assessed by histology using NAFLD activity score. Markers of inflammation, insulin resistance and adiponectin signaling were measured at mRNA and protein levels. Using J774A.1 cells as a model of Kupffer cells, the effect of alcoholic beverages on adiponectin receptor 1 (Adipor1) was assessed. Results Hepatic triglyceride concentration, neutrophil granulocytes, iNOS protein concentrations and early signs of insulin resistance found in FFC-fed mice were significantly attenuated in FFC+ B-fed mice (P

Technetium-99 (99Tc) is a major risk driver at nuclear power plants and several US Department of Energy (DOE) sites. Pertechnetate (TcO4−), the most common chemical form present in liquid nuclear waste and the environment, displays limited adsorption onto sediments, making it highly mobile and difficult to immobilize. In this work, inexpensive organoclays and granular activated carbon (GAC) were investigated for TcO4− sequestration from artificial groundwater (AGW). The Tc adsorption capacities were 15 mg/g for organoclays and 25 mg/g for GAC from pH 3–12 AGW under oxic conditions. Competitive NO3− at two orders of magnitude greater concentration than TcO4− reduced the Tc adsorption capacity by only 9–25%. In addition, the adsorbed Tc was effectively desorbed by KI, but not Na2SO4, and the regenerated sorbents retained their Tc removal capacity. X-ray absorption spectroscopy demonstrated that the Tc species bound to the organoclays and GAC was Tc(VII) (i.e., TcO4−), rather than Tc(IV). Thus, the inexpensive organoclays and GAC are highly effective at sequestering 99Tc in its naturally existing TcO4− without requiring costly reductive systems, which may provide a practical solution for removing 99TcO4− from environmental systems.

We developed a general platform for the fabrication of transition metal oxide nanoparticles supported by a graphene foam (GF) by first coating it with a methacrylated gelatin (GelMA) hydrogel, which served as a 3D matrix for nanoparticle dispersion. The engineered GelMA/GF matrix was hydrophilic with good mechanical strength and high conductivity, therefore providing a good platform for the dispersion of a variety of metal/oxide precursors. Due to this platform, well-dispersed Co3O4 nanoparticles with the smallest size of 3 nm assembled on the nitrogen-doped graphene foam (Co3O4/NGF). The crystalline transformation from a CoCl2[H2O]2 precursor to Co3O4 was revealed by in operando X-ray diffraction and absorption techniques. After applying Co3O4/NGF as a free-standing electrocatalyst for water splitting, the nanoparticles of size 3 nm exhibited optimal catalytic activity in alkaline media; the corresponding cell could promote water splitting at a current density of 10 mA cm-2 with only 1.63 V and exhibited excellent stability in a 25 h long-term operation. Our results demonstrate that the GelMA hydrogel-coated 3D graphene foam can be a promising platform for the design and fabrication of graphene-based multifunctional materials.

OBJECTIVE To investigate the association between curcumin and the differentially expressed genes (DEG) in synovial tissues of osteoarthritis. METHODS Microarray analysis was used to screen for the DEG in osteoarthritis synovial cells. Curcumin-related genes were identified through the drug-gene interaction network STITCH (http://stitch.embl.de/cgi/input.pl). Expression levels of fibronectin 1 (FN1) and collagen III protein were measured by western blot. MTT assay was used to examine the effects of different concentrations of curcumin on cell viability. Western blot and quantitative real-time polymerase chain reaction were used to validate the different expression levels of matrix metalloproteinase-3 (MMP3). Clone formation assay, flow cytometry, and the TUNEL method were conducted for detecting the cell proliferation and apoptosis rate. RESULTS In the two chips of GSE1919 and GSE55235, the average expression of MMP3 in the osteoarthritis group was 63.7% and 12.9% higher than that of the healthy control, respectively. The results of western blot also showed that the average expression of MMP3 in 30 osteoarthritis patients was 132% higher than that of the healthy group, which confirmed that MMP3 was highly expressed in osteoarthritis group. The results of MTT showed that at 72 h, the cell viability of 40 μmol/L curcumin was the lowest and 79.6% lower than for the 0 μmol/L group, so the final curcumin concentration of 40 μmol/L was selected for subsequent experiments. Western blot results further showed that the expression of MMP3 was 44% lower in the untreated groups compared with the curcumin group, and the expressions of FN1 and collagen III were increased by 112% and 84%, respectively, which indicated that curcumin inhibited MMP3 expression and decreased osteoarthritis synovial cell activity. Cloning formation experiments showed that cell numbers increased by 75% and 20.5% in untreated and curcumin groups, and compared with the untreated group, the cells in the curcumin group decreased by 30.8%. Flow cytometry showed that the apoptotic rate in the curcumin group increased by 85.1% compared with the untreated group, but for a single group, MMP3 decreased the apoptotic rate by 53.9% and 46.7%, respectively. CONCLUSIONS MMP3 was highly expressed in osteoarthritis synovial cells. Curcumin could reduce cell viability, inhibit cell proliferation, increase cell apoptosis, and eventually alleviate inflammation of osteoarthritis by inhibiting the expression of MMP3.

A robust porous structure is often needed for practical applications in electrochemical devices, such as fuel cells, batteries, and electrolyzers. While templating approach is useful for the preparation of porous materials in general, it is not effective for the synthesis of oxide-based electrocatalysts owing to the chemical instability of disordered porous materials thus created. Now the synthesis of phase-pure porous yttrium ruthenate pyrochlore oxide using an unconventional porogen of perchloric acid is presented. The lattice oxygen defects are formed by the mixed-valence state of Ru4+/5+ through the partial substitution of Ru4+ with Y3+ cations, leading to the formation of mixed B-site Y2 [Ru1.6 Y0.4 ]O7-δ . This porous Y2 [Ru1.6 Y0.4 ]O7-δ electrocatalyst exhibits a turnover frequency (TOF) of 560 s-1 (at 1.5 V versus RHE) for the oxygen evolution reaction, which is two orders of magnitude higher than that of the RuO2 reference catalyst (5.41 s-1 ).

In this article, carbon nanotubes (CNTs) was modified with conducting polymer polyaniline (PANI) to produce composite supporters (PANI-CNTs), and then the MnO2/PANI-CNTs composite material was prep...

Rh nanostructures composed of nanosheets embedded with nanodomains adopt vacated Barlow packing with ordered vacancies., Metallic nanostructures are commonly densely packed into a few packing variants with slightly different atomic packing factors. The structural aspects and physicochemical properties related with the vacancies in such nanostructures are rarely explored because of lack of an effective way to control the introduction of vacancy sites. Highly voided metallic nanostructures with ordered vacancies are however energetically high lying and very difficult to synthesize. Here, we report a chemical method for synthesis of hierarchical Rh nanostructures (Rh NSs) composed of ultrathin nanosheets, composed of hexagonal close-packed structure embedded with nanodomains that adopt a vacated Barlow packing with ordered vacancies. The obtained Rh NSs exhibit remarkably enhanced electrocatalytic activity and stability toward the hydrogen evolution reaction (HER) in alkaline media. Theoretical calculations reveal that the exceptional electrocatalytic performance of Rh NSs originates from their unique vacancy structures, which facilitate the adsorption and dissociation of H2O in the HER.

The structural-functional organization of ammonia and glutamine metabolism in the liver acinus involves highly specialized hepatocyte subpopulations like glutamine synthetase (GS) expressing perivenous hepatocytes (scavenger cells). However, this cell population has not yet been characterized extensively regarding expression of other genes and potential subpopulations. This was investigated in the present study by proteome profiling of periportal GS-negative and perivenous GS-expressing hepatocytes from mouse and rat. Apart from established markers of GS+ hepatocytes such as glutamate/aspartate transporter II (GLT1) or ammonium transporter Rh type B (RhBG), we identified novel scavenger cell-specific proteins like basal transcription factor 3 (BTF3) and heat-shock protein 25 (HSP25). Interestingly, BTF3 and HSP25 were heterogeneously distributed among GS+ hepatocytes in mouse liver slices. Feeding experiments showed that RhBG expression was increased in livers from mice fed with high protein diet compared to standard chow. While spatial distributions of GS and carbamoylphosphate synthetase 1 (CPS1) were unaffected, periportal areas constituted by glutaminase 2 (GLS2)-positive hepatocytes were enlarged or reduced in response to high or low protein diet, respectively. The data suggest that the population of perivenous GS+ scavenger cells is heterogeneous and not uniform as previously suggested which may reflect a functional heterogeneity, possibly relevant for liver regeneration.

Anionic redox in positive electrode materials in Li-ion batteries provides an additional redox couple besides conventional metal redox, which can be harvested to further boost the energy density of current Li-ion batteries. However, the requirement for the reversible anionic redox activity remains under debate, hindering the rational design of new materials with reversible anionic redox. In this work, we employed differential electrochemical mass spectrometry (DEMS) to monitor the release of oxygen and to quantify the reversibility of the anionic redox of Li2Ru0.75M0.25O3 (M = Ti, Cr, Mn, Fe, Ru, Sn, Pt, Ir) upon first charge. X-ray absorption spectroscopy, coupled with density functional theory (DFT) calculations, show that various substituents have a minimal effect on the nominal metal redox, yet more ionic substituents and reduced metal-oxygen covalency introduce irreversible oxygen redox, accompanied with easier distortion of the M-O octahedron and a smaller barrier for forming an oxygen dimer within the octahedron. Therefore, a strong metal-oxygen covalency is needed to enhance the reversible oxygen redox. We proposed an electron-phonon-coupled descriptor for the reversibility of oxygen redox, laying the foundation for high-throughput screening of novel materials that enable reversible anionic redox activity. This journal is

The addition of plant oils such as soybean oil (S) to a diet rich in saturated fatty acids is discussed as a possible route to prevent or diminish the development of metabolic disease. Here, we assessed whether a butterfat-rich diet fortified with S affects the development of early non-alcoholic steatohepatitis (NASH) and glucose intolerance. Female C57BL/6J mice were fed a standard-control diet (C), a fat-, fructose-, and cholesterol-rich diet (FFC, 25E% butterfat, 50% (wt./wt.) fructose, 0.16% (wt./wt.) cholesterol), or FFC supplemented with S (FFC + S, 21E% butterfat + 4E% S) for 13 weeks. Indicators of liver damage, inflammation, intestinal barrier function, and glucose metabolism were measured. Lipopolysaccharide (LPS)-challenged J774A.1 cells were incubated with linolenic and linoleic acids (ratio 1:7.1, equivalent to S). The development of early NASH and glucose intolerance was significantly attenuated in FFC + S–fed mice compared to FFC-fed mice associated with lower hepatic toll-like receptor-4 mRNA expression, while markers of intestinal barrier function were significantly higher than in C-fed mice. Linolenic and linoleic acid significantly attenuated LPS-induced formation of reactive nitrogen species and interleukin-1 beta mRNA expression in J774A.1 cells. Our results indicate that fortifying butterfat with S may attenuate the development of NASH and glucose intolerance in mice.