Search

Bismuth oxyhalides (BiOX, X = F, Cl, Br, I) are emerging energy materials because of their remarkable catalytic activity. The BiOX compounds usually have a tetragonal type crystal structure with unique layered morphology consisting of [X-Bi-O-Bi-X] sheets. Although the BiOX nanosheets exposed with {001} facets perform superior photoactivity, there is lack of understanding about their capability in the electrochemical CO2 reduction reaction (CO2RR). Herein, we adopt wet-chemical syntheses to make 2D BiOCl and Pd-doped BiOCl nanosheets for CO2RR. In the results, formic acid is the only one kind of product converted from CO2 along with H2 gas from water reduction over both BiOCl and Pd-doped BiOCl nanosheets. By thorough analyses with ex situ and in situ spectroscopy, the results reflect that (1) metallic Bi0 atoms generated by the applied negative potentials serve as the catalytic sites for the hydrogen evolution reaction (HER) and CO2RR and (2) the existence of doped Pd ions in the BiOCl structure reduces the barrier of charge transfer over the nanosheets, which enhances HER and CO2RR activities. We believe that the observations are important references for making catalysts toward CO2RR performance.

An elevated level of anthropogenic CO2 has been the major cause of global warming, and significant efforts are being made around the world towards the development of CO2 capture, storage and reuse technologies. Among various CO2 conversion technologies, electrochemical CO2 reduction (CO2 RR) by nanocrystals is one of the most promising strategies as it is facile, quick, and can be integrated with other renewable energy techniques. Judiciously designed catalytic nanomaterials promise to be the next generation of electrochemical electrodes that offer cutting-edge performance, low energy consumption and aid in reducing overall carbon footprint. In this minireview, we highlight the recent developments related to the bimetallic Cu-based nanocatalysts and discuss their structure-property relationships. We focus on the design principles and parameters required for the enhancement of CO2 conversion efficiency, selectivity, and stability.

Palladium absorbs large volumetric quantities of hydrogen at room temperature and ambient pressure, making the palladium hydride system a promising candidate for hydrogen storage. Here, we use Bragg coherent diffraction imaging to map the strain associated with defects in three dimensions before and during the hydride phase transformation of an individual octahedral palladium nanoparticle, synthesized using a seed-mediated approach. The displacement distribution imaging unveils the location of the seed nanoparticle in the final nanocrystal. By comparing our experimental results with a finite-element model, we verify that the seed nanoparticle causes a characteristic displacement distribution of the larger nanocrystal. During the hydrogen exposure, the hydride phase is predominantly formed on one tip of the octahedra, where there is a high number of lower coordinated Pd atoms. Our experimental and theoretical results provide an unambiguous method for future structure optimization of seed-mediated nanoparticle growth and in the design of palladium-based hydrogen storage systems. Palladium can absorb high volumes of hydrogen, but the morphology and 3D displacements occurring during palladium hydride phase formation are not fully characterized in the literature. Here, the authors use Bragg coherent diffraction imaging to map the strain within an individual palladium nanoparticle before and during hydride phase transformation, identifying a characteristic displacement caused by the seed particle in the nanocrystal.

The global ammonia yield is critical to the fertilizer industry as the global food demand is highly dependent on it, whereas, NH3 is also a key chemical for pharmaceutical, textile, plastic, explosive, and dye-making industries. At present, the demand for NH3 is fulfilled by the Haber-Bosch method, which consumes 1-3% of global energy and causes 0.5-1% CO2 emission every year. To reduce emissions and improve energy efficiency, the electrochemical nitrogen gas reduction reaction (N2RR) has received much attention and support after the funding announcement by the U.S. Department of Energy. In this work, we have created hollow CuAu nanoboxes with Cu-rich inner walls to improve the NH3 Faradaic efficiency in N2RR. These beveled nanoboxes are produced in different degrees of corner and edge etching, which produces both polyhedral and concave structures. In N2RR, the binary CuAu nanoboxes enhanced NH3 production compared to individual Au and Cu nanocubes. The results of DFT calculations suggest the Cu-rich inner walls in the hollow beveled CuAu nanoboxes play a major role in their performance by reducing the free energy ΔG*NNH for the potential-determining step to form *NNH (* + N2(g) + H+ + e- → *NNH). Meanwhile, the results in 10-cycle and solar-illuminated N2RR indicate the beveled CuAu nanoboxes are not only robust electrocatalysts but show promise in photocatalysis as well.

Flexible and free-standing thin films were fabricated and employed directly as working electrodes for the electrochemical reduction of CO2 in 0.5 N KHCO3 at 25 °C, in which, various sizes of Cu2O nanocubes (~ 27 ± 2, 37 ± 3, 62 ± 4 and 207 ± 3 nm) with different extent of surface oxidation (13, 20, 66, and 64% of Cu(II)) were reinforced on to polyvinyl alcohol/reduced graphene oxide matrix (PVA/rGO/(Cu2O/CuO_X, where, X = without halide, Cl, Br and I). The size of Cu2O nanocubes and their surface oxidation were systematically altered by the addition of 1 mL of 10 mM sodium halides (NaCl, NaBr, and NaI) during the synthesis. Energy-dispersive X-ray spectroscopy mapping displayed the specific adsorption of Cl− ions over the Cu2O surface, whereas Br− and I− ions did not show such behaviour. PVA/rGO/(Cu2O/CuO_Cl) thin film exhibited a low overpotential of 20 mV for CO2 reduction reaction and, ~ 60 and ~ 7 times higher current density at − 0.80 V vs. RHE compared to that of the PVA/rGO/(Cu2O/CuO), PVA/rGO/(Cu2O/CuO_Br) ≈ PVA/rGO/(Cu2O/CuO_I), respectively. Gas chromatography and 1H-NMR analyses confirmed methanol as the single liquid product, with a faradaic efficiency of 63% at − 0.75 V vs. RHE on PVA/rGO/(Cu2O/CuO_Cl) thin film.

Copper is an earth-abundant element that can be used to reduce the high cost and unsatisfactory durability of pure Pt catalysts by the formation of bimetallic Pt–M nanocrystals. Among CuPt nanostru...

Dye-sensitized solar cells (DSSCs) are one of the most promising organic photovoltaics. The optimized efficiency of a tandem cell combined with both n- and p-type DSSCs was theoretically predicted to be 43%. The bottleneck for reaching the optimized performance is limited by the p-type half-cell, particularly the lacking of an appropriate semiconducting material as the photocathode. In this regard, we report the surfactant-mediated synthesis of nickel oxide nanomaterial using a chemical co-precipitation method. The new material was fully characterized by XRD, SEM, XPS, EDS, and BET. The BET result indicates the nickel oxide nanoparticles synthesized with surfactant attain higher surface area than the conventional one. In addition, the new organic dyes with electron-deficient diphenylquinoxaline incorporated within the molecular structure were prepared for p-type dye-sensitized solar cells with the newly prepared NiO as the photocathode. The new organic dyes consist of carboxylic acid as the anchoring group, triphenylamine as the electron donor, 2,3-diphenylquinoxaline as the auxiliary acceptor moiety, 2-methylenemalononitrile as electron acceptor, connected with thiophene, 3,4-ethylenedioxythiophene, and 2,2′-bithiophene as the π-spacer. Sensitizers with mono-anchoring group (EH166, EH122, and EH174) performed better than their corresponding double-anchoring sensitizers (EH162, EH126, and EH170). Among these, dye EH174 exhibited the best conversion efficiency up to 0.207% with a short-circuit photocurrent density of 4.84 mAcm−2, an open-circuit photovoltage of 137 mV, and a fill factor of 0.312. The current results indicate that the combination of electron-deficient quinoxaline motif with suitable π-linker in a D-A-π-A molecular structure is a promising design of p-type sensitizers for NiO-based p-DSSCs.

Platinum was coated on the surfaces of copper nanocubes to form Cu–CuPt core–alloy–frame nanocrystals with a rhombic dodecahedral (RD) shape. Co-reduction of Pt2+ ions and residual Cu+ ions in the supernatant of the Cu nanocube solution followed by the interdiffusion of Cu and Pt atoms over the core–shell interface allowed their formation. Growth in the ⟨100⟩ directions of the {100}-terminated Cu nanocubes resulted in the {110}-faceted rhombic dodecahedra. By the introduction of additional Pt precursor, the {100} vertices of the Cu–CuPt RD nanocrystals could be selectively extended to form spiny CuPt RD nanocrystals. After removing the Cu core template, both CuPt alloy RD and spiny CuPt alloy RD nanoframes (NFs) were obtained with Pt/Cu ratios of 26/74 and 41/59, respectively. Abundant surface defects render them highly active catalysts due to the open frame structure of both sets of NFs. The spiny RD NFs showed superior specific activity toward the oxygen reduction reaction, 1.3 and 3 times to those of t...

Au-Pd nanocrystals are an intriguing system to study the integrated functions of localized surface plasmon resonance (LSPR) and heterogeneous catalysis. Gold is both durable and can harness incident light energy to enhance the catalytic activity of another metal, such as Pd, via the SPR effect in bimetallic nanocrystals. Despite the superior catalytic performance of icosahedral (IH) nanocrystals compared to alternate morphologies, the controlled synthesis of alloy and core-shell IH is still greatly challenged by the disparate reduction rates of metal precursors and lack of continuous epigrowth on multiply twinned boundaries of such surfaces. Herein, we demonstrate a one-step strategy for the controlled growth of monodisperse Au-Pd alloy and core-shell IH with terraced shells by turning an ionic switch between [Br(-)]/[Cl(-)] in the coreduction process. The core-shell IH nanocrystals contain AuPd alloy cores and ultrathin Pd shells (2 nm). They not only display more than double the activity of the commercial Pd catalysts in ethanol electrooxidation attributed to monatomic step terraces but also show SPR-enhanced conversion of 4-nitrophenol. This strategy holds promise toward the development of alternate bimetallic IH nanocrystals for electrochemical and plasmon-enhanced catalysis.

Graphitic carbon nitride (g-C3N4) has attracted considerable attention with regard to its use in photocatalytic solar hydrogen production by the splitting of water. High charge carrier recombination critically limits the photocatalytic activity of g-C3N4. Plasmonic metal nanoparticles that can generate localized surface plasmon resonance (LSPR) have been suggested to enhance the harvesting of visible light and to improve water splitting efficiency. However, direct contact between metal nanoparticles and g-C3N4 reduces the hydrogen generation efficiency owing to energy loss by Forster resonance energy transfer (FRET), which competes with plasmon resonance energy transfer (PRET). Decorating g-C3N4 with Ag@SiO2 core-shell plasmonic nanoparticles increases its photocatalytic ability. Tuning the size of the SiO2 nanogap can optimize the photocatalytic performance of g-C3N4/Ag@SiO2, which involves a trade-off between PRET and FRET. X-ray absorption spectroscopy (XAS) is utilized to investigate the electronic structure of g-C3N4 and its modulation with Ag@SiO2. In situ XAS reveals the dynamics of the charge carriers under solar illumination. Analytic results suggest charge redistribution, shifting of the conduction band, modification of the unoccupied states, and consequent improvement in photocatalytic activity by solar illumination. This work sheds light on the effect of LSPR on this photocatalyst with reference to its electronic structure.

Sub-1 nm PtSn nanosheets of 0.6–0.9 nm in thickness were synthesized via a solution colloidal method and were applied as electrooxidation catalysts for methanol oxidation reaction (MOR) and ethanol oxidation (EOR) in alkaline and acid environments. Owing to the specific structural and compositional characteristics, the as-prepared PtSn nanosheets exhibits superior activity and durability relative to commercial Pt black and Pt/carbon catalysts. PtSn nanosheets not only exhibit an outstanding mass activity in MOR (871.6 mA mg Pt−1), which is 2.3 times (371 mA mg Pt−1) and 10.1 times (86.1 mA mg Pt−1) higher than that of commercial Pt/carbon and Pt black respectively, but also display an mass activity in EOR (673.6 mA mg Pt−1) with 5.3 times higher commercial Pt black (127.7 mA mg Pt−1) and 2.3 times higher than commercial Pt/C catalyst (295 mA mgPt−1). The reported value is the highest activity in both MOR and EOR examinations compared to the reported PtSn-based electrocatalysts,. The improved performance may be due to the highly-reactive exposed (1 1 1) facet sites resulted from its sub-1 nm 2D sheet like morphology.

The creation of hierarchical porosity in metal-organic frameworks (MOFs) could benefit various applications of MOFs such as gas storage and separation. Having single-crystalline microcrystals instead of poly-crystalline composites is critical for these potential applications of MOFs with hierarchical porosity. We developed a room temperature synthetic method to generate uniform hollow and mesoporous zeolitic imidazolate framework-8 (ZIF-8) microcrystals with a single-crystalline structure via overgrowing a ZIF-8 shell in methanol solution on a ZIF-8 core with water adsorbed in the pores. The cavities formed as a result of the different solvent micro-environment. This double-solvent mediated overgrowth method could be applied to prepare other MOFs with hierarchical porosity.

Submicron-sized mesoporous nickel ferrite (NiFe2O4) spheres were prepared by an aerosol spray pyrolysis method using Pluronic F127 as a structure-directing agent, and their photocatalytic performance for hydrogen (H2) evolution was examined in an aqueous MeOH solution by visible light irradiation (λ > 420 nm). The structure of the spherical mesoporous nickel ferrites was studied by transmission electron microscopy, powder X-ray diffraction, and N2 adsorption–desorption isotherm measurements. Mesoporous NiFe2O4 spheres of high specific surface area (278 m2 g–1) with a highly crystalline framework were prepared by adjusting the amount of structure-directing agent and the calcining condition. High photocatalytic activity of mesoporous NiFe2O4 for H2 evolution from water with methanol was achieved due to the combination of high surface area and high crystallinity of the nickel ferrites.

Developing syntheses of more sophisticated nanostructures comprising late transition metals broadens the tools to rationally design suitable heterogeneous catalysts for chemical transformations. Herein, we report a synthesis of Pd-Rh nanoboxes by controlling the migration of metals in a core-shell nanoparticle. The Pd-Rh nanobox structure is a grid-like arrangement of two distinct metal phases, and the surfaces of these boxes are {100} dominant Pd and Rh. The catalytic behaviors of the particles were examined in electrochemistry to investigate strain effects arising from this structure. It was found that the trends in activity of model fuel cell reactions cannot be explained solely by the surface composition. The lattice strain emerging from the nanoscale separation of metal phases at the surface also plays an important role.

Colloidal techniques were used to synthesize monodisperse Pt nanoparticles of four distinct sizes between 2 and 7 nm before immobilization onto silica. Ethylene hydrogenation demonstrated structure-insensitive behavior with TOFs of ∼12 s–1 before poisoning. With thiophene being a strong binding adsorbate, TOFs decreased by orders of magnitude, and the poisoning-induced antipathetic structure sensitivity because thiophene adsorbed more strongly to the coordinatively unsaturated, as compared with coordinatively saturated, surfaces, and the degree of saturation increased with decreasing Pt size. This effort is part of a broader study in which structure sensitivity is analyzed for adsorbates in complex reaction networks.

We have systematically explored how plasmonic effects influence the characteristics of polymer photovoltaic devices (OPVs) incorporating a blend of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM). We blended gold nanoparticles (Au NPs) into the anodic buffer layer to trigger localized surface plasmon resonance (LSPR), which enhanced the performance of the OPVs without dramatically sacrificing their electrical properties. Steady state photoluminescence (PL) measurements revealed a significant increase in fluorescence intensity, which we attribute to the increased light absorption in P3HT induced by the LSPR. As a result, the rate of generation of excitons was enhanced significantly. Furthermore, dynamic PL measurements revealed that the LSPR notably reduced the lifetime of photogenerated excitons in the active blend, suggesting that interplay between the surface plasmons and excitons facilitated the charge transfer process. This phenomenon reduced the recombination level of geminate excitons and, thereby, increased the probability of exciton dissociation. Accordingly, both the photocurrents and fill factors of the OPV devices were enhanced significantly. The primary origin of this improved performance was local enhancement of the electromagnetic field surrounding the Au NPs. The power conversion efficiency of the OPV device incorporating the Au NPs improved to 4.24% from a value of 3.57% for the device fabricated without Au NPs.

We report highly facet-dependent electrical properties of Cu(2)O nanocubes and octahedra and significant enhancement of gold nanocrystal cores to the electrical conductivity of Au-Cu(2)O core-shell octahedra. Cu(2)O nanocubes and octahedra and Au-Cu(2)O core-shell cubes and octahedra were synthesized by following our reported facile procedures at room temperature. Two oxide-free tungsten probes attached to a nanomanipulator installed inside a scanning electron microscope made contacts to a single Cu(2)O nanocrystal for the I-V measurements. Pristine Cu(2)O octahedra bounded by {111} facets are 1100 times more conductive than pristine Cu(2)O cubes enclosed by {100} faces, which are barely conductive. Core-shell cubes are only slightly more conductive than pristine cubes. A 10,000-fold increase in conductivity over a cube has been recorded for an octahedron. Remarkably, core-shell octahedra are far more conductive than pristine octahedra. The same facet-dependent electrical behavior can still be observed on a single nanocrystal exposing both {111} and {100} facets. This new fundamental property may be observable in other semiconductor nanocrystals. We also have shown that both core-shell cubes and octahedra outperform pristine cubes and octahedra in the photodegradation of methyl orange. Efficient photoinduced charge separation is attributed to this enhanced photocatalytic activity. Interestingly, facet-selective etching occurred over the {100} corners of some octahedra and core-shell octahedra during photocatalysis. The successful preparation of Au-Cu(2)O core-shell heterostructures with precise shape control has offered opportunities to discover new and exciting physical and chemical properties of nanocrystals.

We report the growth of core−shell Ga−GaN nanostructures by simple refluxing of a mixture of GaCl3 and lithium bis(trimethylsilyl)amide (LiHMDS) in trioctylamine at 380 °C for 24 h under nitrogen flow. The resulting spherical Ga−GaN nanostructures had diameters of ∼550 nm. By immersing the nanostructures in aqua regia, the gallium cores could be removed, and hollow GaN spheres with thicknesses of 15−25 nm were produced. The shells consisted of connected GaN nanocrystals of both cubic and hexagonal phases. Infrared spectroscopy confirmed the presence of silica or silicate in the GaN shells. The silicon source likely comes from the pyrolysis of LiHMDS. The growth process was studied by examining the intermediate products formed. Gallium metal cores appeared below 380 °C, followed by the slow formation of GaN nanocrystals on the core surfaces. The slow growth of the GaN shells is related to the gradual supply of the nitrogen source from the thermal decomposition of LiHMDS. Thinner shells with a thickness of ...

Here we report the hydrothermal synthesis of octahedral gold nanocrystals from an aqueous solution of HAuCl4, trisodium citrate, and cetyltrimethylammonium bromide (CTAB) surfactant. By heating the mixture at 110 °C for 6, 12, 24, 48, and 72 h, gold octahedra with approximate average sizes of 30, 60, 90, 120, and 150 nm can be obtained. The percent yield of octahedral nanocrystals is more than 90% for all the samples. Products formed at shorter reaction times were also examined. Structural characterization confirmed that the octahedra are bounded by entirely {111} faces. As particle size increases, the surface plasmon resonance (SPR) absorption band red-shifts from 543 to 635 nm. These monodisperse gold octahedra can spontaneously self-assemble into long-range ordered packing structures upon water evaporation. Three types of self-assembled structures with faces, edges, or corners of the octahedra contacting the substrates have been identified. Particle size can affect the type of packing structure they ad...

We report a facile method for the synthesis of cuprous oxide nanocrystals with systematic shape evolution. Monodisperse truncated cubic, cuboctahedral, truncated octahedral, and octahedral nanocrystals can be synthesized directly in an aqueous solution of CuCl2, sodium dodecyl sulfate (SDS) surfactant, hydroxylamine (NH2OH·HCl) reductant, and NaOH by simply varying the volume of hydroxylamine added to the reaction mixture. SDS surfactant was found to be necessary for a precise control of the nanocrystal morphology. Adjustment of the volume of NaOH added provides a means to vary the particle size. In the case of octahedral nanocrystals, particles with sizes of 160−460 nm can be prepared. By examining the intermediate products formed, which resemble the final nanocrystal structures, a growth mechanism is proposed. Optical characterization of these Cu2O nanocrystals showed band gap absorption at 470−490 nm and strong light scattering bands extending from the visible to the near-infrared light region. All fou...

We report the high yield growth of monodispersed Cu 2 O nanocubes with approximate average sizes of 40, 65, 100, 230, and 420 nm using a seed-mediated synthesis approach in aqueous solution. The nanocubes are formed in 2 hours at room temperature. The standard deviation of the nanocube sizes in each sample is below 10 %. Structural analysis revealed that these nanocubes have six {100} faces, and possess truncated {110} edges and {111} corners. The combination of sodium dodecyl sulfate (SDS) and CuSO 4 was found to be critical to the formation of structurally well-defined Cu 2 O nanocubes. The nanocubes presumably were formed through the controlled aggregation of Cu 2 O seed particles and then surface reconstruction under the influence of SDS capping surfactant and sulfate ions to yield this truncated cubic structure. Optical characterization showed that nanocubes smaller than 100 nm absorb at -490 nm, while nanocubes larger than 200 nm display an absorption band at 515-525 nm. Additional absorption feature was observed in the red and near-infrared regions for the larger Cu 2 O nanocubes due to the light scattering effect. The investigation of the application of these nanocubes for the photodegradation of rhodamine B revealed the {111} crystal surfaces as the active surfaces responsible for the photocatalytic activity of Cu 2 O nanostructures. This simple and rapid synthesis of monodispersed Cu 2 O nanocubes should allow further examination of their various properties as a function of nanocrystal sizes.

We report the synthesis of pentagonal- and hexagonal-shaped gold nanoparticles with controlled diameters ranging from 5 to 50 nm. These nanoparticles were prepared by a seeding growth approach. Sodium dodecyl sulfate (SDS) molecules served as the capping agent to restrict the particle size. In addition, the formation of highly faceted gold nanoparticles may be facilitated by the possibly ineffective capping interactions between the lamellar micellar structures formed by the SDS molecules and the gold nanoparticles. The crystal structure of the highly faceted particles was found to consist of mostly [111] surfaces as particle size increases, as revealed by both TEM and XRD results.

We have developed a general synthetic route to encapsulate small molecules in monodisperse zeolitic imid-azolate framework-8 (ZIF-8) nanospheres for drug delivery. Electron microscopy, powder X-ray diffraction, and elemental analysis show that the small-molecule-encapsulated ZIF-8 nanospheres are uniform 70 nm particles with single-crystalline structure. Several small molecules, including fluorescein and the anticancer drug camptothecin, were encapsulated inside of the ZIF-8 framework. Evaluation of fluorescein-encapsulated ZIF-8 nanospheres in the MCF-7 breast cancer cell line demonstrated cell internalization and minimal cytotoxicity. The 70 nm particle size facilitates cellular uptake, and the pH-responsive dissociation of the ZIF-8 framework likely results in endosomal release of the small-molecule cargo, thereby rendering the ZIF-8 scaffold an ideal drug delivery vehicle. To confirm this, we demonstrate that camptothecin encapsulated ZIF-8 particles show enhanced cell death, indicative of internalization and intracellular release of the drug. To demonstrate the versatility of this ZIF-8 system, iron oxide nanoparticles were also encapsulated into the ZIF-8 nanospheres, thereby endowing magnetic features to these nanospheres.

The effect of lattice strain on the catalytic properties of Pd nanoparticles is systematically studied. Synthetic strategies for the preparation of a series of shape-controlled Pd nanocrystals with lattice strain generated from different sources has been developed. All of these nanocrystals were created with the same capping agent under similar reaction conditions. First, a series of Pd nanoparticles was synthesized that were enclosed in {111} surfaces: Single-crystalline Pd octahedra, single-crystalline AuPd core–shell octahedra, and twinned Pd icosahedra. Next, various {100}-terminated particles were synthesized: Single-crystalline Pd cubes and single-crystalline AuPd core–shell cubes. Different extents of lattice strain were evident by comparing the X-ray diffraction patterns of these particles. During electrocatalysis, decreased potentials for CO stripping and increased current densities for formic-acid oxidation were observed for the strained nanoparticles. In the gas-phase hydrogenation of ethylene, the activities of the strained nanoparticles were lower than those of the single-crystalline Pd nanoparticles, perhaps owing to a larger amount of cetyl trimethylammonium bromide on the surface.

Metal nanocrystals (NCs) comprising rhodium are heterogeneous catalysts for CO oxidation, NO reduction, hydrogenations, electro-oxidations, and hydroformylation reactions. It has been demonstrated that control of structure at the nanoscale can enhance the performance of a heterogeneous metal catalyst, such as Rh, but molecular-level control of NCs comprising this metal is less studied compared to gold, silver, platinum, and palladium. We report an iodide-mediated epitaxial overgrowth of Rh by using the surfaces of well-defined foreign metal crystals as substrates to direct the Rh surface structures. The epigrowth can be accomplished on different sizes, morphologies, and identities of metal substrates. The surface structures of the resulting bimetallic NCs were studied using electron microscopy, and their distinct catalytic behaviors were examined in CO stripping and the electro-oxidation of formic acid. Iodide was found to play a crucial role in the overgrowth mechanism. With the addition of iodide, the Rh epigrowth can even be achieved on gold substrates despite the rather large lattice mismatch of ~7%. Hollow Rh nanostructures have also been generated by selective etching of the core substrates. The new role of iodide in the overgrowth and the high level of control for Rh could hold the key to future nanoscale control of this important metal's architecture for use in heterogeneous catalysis.

A general synthetic strategy for yolk-shell nanocrystal@ZIF-8 nanostructures has been developed. The yolk-shell nanostructures possess the functions of nanoparticle cores, microporous shells, and a cavity in between, which offer great potential in heterogeneous catalysis. The synthetic strategy involved first coating the nanocrystal cores with a layer of Cu(2)O as the sacrificial template and then a layer of polycrystalline ZIF-8. The clean Cu(2)O surface assists in the formation of the ZIF-8 coating layer and is etched off spontaneously and simultaneously during this process. The yolk-shell nanostructures were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and nitrogen adsorption. To study the catalytic behavior, hydrogenations of ethylene, cyclohexene, and cyclooctene as model reactions were carried out over the Pd@ZIF-8 catalysts. The microporous ZIF-8 shell provides excellent molecular-size selectivity. The results show high activity for the ethylene and cyclohexene hydrogenations but not in the cyclooctene hydrogenation. Different activation energies for cyclohexene hydrogenation were obtained for nanostructures with and without the cavity in between the core and the shell. This demonstrates the importance of controlling the cavity because of its influence on the catalysis.

We report a seed-mediated synthesis method for the preparation of gold nanocrystals with systematic shape evolution from truncated cubic to cubic, trisoctahedral, and rhombic dodecahedral structures in aqueous solution for the first time. Nanocrystals with transitional morphologies were also synthesized. The combination of using cetyltrimethylammonium chloride (CTAC) surfactant and a very small amount of NaBr to control the bromide concentration in the growth solution was found to be critical to the formation of nanocubes. Variation in the volume of ascorbic acid added to the growth solution enabled the fine control of nanocrystal morphology. Nanocubes and rhombic dodecahedra with controlled sizes of 30-75 nm were prepared by adjusting the volume of the seed solution added to the growth solution. They can self-assemble into ordered packing structures on substrates because of their uniform sizes. XRD, TEM, and UV-vis absorption characterization of the different products synthesized have been performed. By increasing the bromide concentration 5-fold that used to make the nanocubes, unusual right bipyramids of gold bounded by six {100} faces were produced. The high product purity and excellent size control of this facile synthetic approach should make these novel gold nanostructures be readily available for a wide range of studies.

We have improved the device performance of polymer photovoltaic devices (OPVs) by blending Au nanoparticles (NPs) into the anodic buffer layer. The unique optical properties of localized surface plasmon resonance (LSPR), triggered by Au NPs, was beneficial for improving the photocurrent of OPVs. The excitation of LSPR increased not only the exciton generation rate but also the exciton dissociation probability. As a result, the power conversion efficiency of OPVs has been significantly enhanced from 3.57 to 4.24%.

We report a simple approach for the fabrication of cuprous oxide (Cu 2 O) nanocages and nanoframes. An aqueous solution of CuCl 2 , sodium dodecyl sulfate (SDS) surfactant, NH 2 OH·HCl reductant, HCl, and NaOH was prepared with reagents introduced in the order listed. Rapid seed particle aggregation and surface reconstruction of the intermediate structures resulted in the growth of type I nanoframes with just the {110} skeleton faces and empty {100} faces 45 minutes after mixing the reagents. Continued crystal growth for additional 75 min produced the nanocages with filled {100} faces. The nanocages have diameters of 350–400 nm, and their walls are thicker than those of the nanoframes. Selective acidic etching over the {110} faces of the nanocages by HCl via the addition of ethanol and then sonication of the solution led to the formation of type II nanoframes with elliptical pores on the {110} faces. The morphologies of these nanoframes have been carefully examined by electron microscopy. Without adding ethanol, random etching of the nanocages can occur at a slow rate. These composite materials should display interesting properties and functions.

The synthesis of gold nanoplates was carried out in an aqueous solution by thermal reduction of HAuCl(4) with trisodium citrate in the presence of cetyltrimethylammonium bromide (CTAB) surfactant in just 5-40 min. The sizes of the gold nanoplates can be varied from as small as tens of nanometers in width, to several hundreds of nanometers, and even a few microns in width by changing the reagent concentrations, solution temperature, and the reaction time. A [CTAB]/[HAuCl(4)] ratio of 6 in the reaction solution was found to be favorable for the formation of gold nanoplates. The nanoplates possess well-defined shapes with sharp edges. The small nanoplates exhibit mainly a triangular shape, while larger nanoplates show a mixture of triangular, hexagonal, truncated triangular, and other symmetrical structures. The nanoplates are composed of essentially (111) lattice planes, as revealed by both XRD and TEM results. Nanoplates with widths from several hundreds of nanometers to a few microns absorb light strongly in the near-infrared region. The growth mechanism of these nanoplates was investigated. The ability to synthesize gold nanoplates with these different size ranges in large scale in aqueous solution using simple CTAB capping surfactant should allow more diverse applications of gold nanoplates.

Synthesis of branched gold nanocrystals by a seeding growth approach is described. In this process, HAuCl4 aqueous solution was supplied stepwise to grow the gold seeds (approximately 2.5 nm) into larger nanoparticles with a highly faceted particle structure (approximately 15-20 nm in diameter). Sodium dodecyl sulfate (SDS) served as a capping agent to facilitate the formation of highly faceted nanoparticles, and ascorbic acid was used as a weak reducing agent. The highly faceted nanoparticles then transformed into branched nanocrystals (approximately 40 nm in length) by further addition of the SDS-HAuCl4 solution and ascorbic acid for particle growth. The branched nanocrystals show bipod, tripod, tetrapod, and pentapod structures and are composed of mainly (111) lattice planes. These multipods appear to grow along the twin boundaries of the initially formed highly faceted gold nanoparticles, as the twin boundaries on the pods originate from the centers of the branched nanocrystals. The concentration of ascorbate ions in the solution was found to have a profound influence on branch formation. These branched nanocrystals are stable to storage at low temperature (that is, 4 degrees C), but they may slowly evolve into a multitwinned faceted crystal structure (that is, pentagonal-shaped decahedral structure) when stored at 30 degrees C.