Search

The cellular CT10 regulator of kinase protein (c-CrkII) transmits signals from oncogenic tyrosine kinases to cellular targets. Nuclear magnetic resonance studies had suggested that in chicken c-CrkII a native state prolyl cis-trans isomerization is involved in signal propagation. Corresponding evidence for the closely related human c-CrkII was not obtained. Here we analyzed the kinetics of folding and substrate binding of the two homologues and found that cis-trans isomerization of Pro238 determines target binding in chicken but not in human c-CrkII. A reciprocal mutational analysis uncovered residues that determine the isomeric state at Pro238 and transmit it to the binding site for downstream target proteins. The transfer of these key residues to human c-CrkII established a regulatory proline switch in this protein, as well. We suggest that Pro238 isomerization extends the lifetime of the signaling-active state of c-CrkII and thereby functions as a long-term molecular storage device.

SlyD is a bacterial two-domain protein that functions as a molecular chaperone, a prolyl cis/trans isomerase, and a nickel-binding protein. This review summarizes recent findings about the molecular enzyme mechanism of SlyD. The chaperone function located in one domain of SlyD is involved in twin-arginine translocation and increases the catalytic efficiency of the prolyl cis/trans isomerase domain in protein folding by two orders of magnitude. The C-terminal tail of SlyD binds Ni2+ ions and supplies them for the maturation of [NiFe] hydrogenases. A combined biochemical and biophysical analysis revealed the molecular basis of the delicate interplay of the different domains of SlyD for optimal function.

The biophysical analysis of multidomain proteins often is difficult because of overlapping signals from the individual domains. Previously, the fluorescent unnatural amino acid p-cyanophenylalanine has been used to study the folding of small single-domain proteins. Here we extend its use to a two-domain protein to selectively analyze the folding of a specific domain within a multidomain protein.

Cyclophilins are ubiquitous cis-trans-prolyl isomerases (PPIases) found in all kingdoms of life. Here, we identify a novel family of cyclophilins, termed AquaCyps, which specifically occurs in marine Alphaproteobacteria, but not in related terrestric species. In addition to a canonical PPIase domain, AquaCyps contain large extensions and insertions. The crystal structures of two representatives from Hirschia baltica, AquaCyp293 and AquaCyp300, reveal the formation of a compact domain, the NIC domain, by the N- and C-terminal extensions together with a central insertion. The NIC domain adopts a novel mixed alpha-helical, beta-sheet fold that is linked to the cyclophilin domain via a conserved disulfide bond. In its overall fold, AquaCyp293 resembles AquaCyp300, but the two proteins utilize distinct sets of active site residues, consistent with differences in their PPIase catalytic properties. While AquaCyp293 is a highly active general PPIase, AquaCyp300 is specific for hydrophobic substrate peptides and exhibits lower overall activity.

In the N2 domain of the gene-3-protein of phage fd, two consecutive β-strands are connected by a mobile loop of seven residues (157–163). The stability of this loop is low, and the Asp160-Pro161 bond at its tip shows conformational heterogeneity with 90% being in the cis and 10% in the trans form. The refolding kinetics of N2 are complex because the molecules with cis or trans isomers at Pro161 both fold to native-like conformations, albeit with different rates. We employed consensus design to shorten the seven-residue irregular loop around Pro161 to a four-residue type I′ turn without a proline. This increased the conformational stability of N2 by almost 10 kJ mol− 1 and abolished the complexity of the folding kinetics. Turn sequences obtained from in vitro selections for increased stability strongly resembled those derived from the consensus design. Two other type I′ turns of N2 could also be stabilized by consensus design. For all three turns, the gain in stability originates from an increase in the rate of refolding. The turns form native-like structures early during refolding and thus stabilize the folding transition state. The crystal structure of the variant with all three stabilized turns confirms that the 157–163 loop was in fact shortened to a type I′ turn and that the other turns maintained their type I′ conformation after sequence optimization.

Class A beta-lactamases (M(r) approximately 29000) provide good models for studying the folding mechanism of large monomeric proteins. In particular, the highly conserved cis peptide bond between residues 166 and 167 at the active site of these enzymes controls important steps in their refolding reaction. In this work, we analyzed how conformational folding, reactivation, and cis/trans peptide bond isomerizations are interrelated in the folding kinetics of beta-lactamases that differ in the nature of the cis peptide bond, which involves a Pro167 in the BS3 and TEM-1 enzyme, a Leu167 in the NMCA enzyme, and which is missing in the PER-1 enzyme. The analysis of folding by spectroscopic probes and by the regain of enzymatic activity in combination with double-mixing procedures indicates that conformational folding can proceed when the 166-167 bond is still in the incorrect trans form. The very slow trans --cis isomerization of the Glu166-Xaa167 peptide bond, however, controls the final step of folding and is required for the regain of the enzymatic activity. This very slow phase is absent in the refolding of PER-1, in which the Glu166-Ala167 peptide bond is trans. The double-mixing experiments revealed that a second slow kinetic phase is caused by the cis/trans isomerization of prolines that are trans in the folded proteins. The folding of beta-lactamases is best described by a model that involves parallel pathways. It highlights the role of peptide bond cis/trans isomerization as a kinetic determinant of folding.

The cis / trans isomerization of peptide bonds before proline (prolyl bonds) is a rate-limiting step in many protein folding reactions, and it is used to switch between alternate functional states of folded proteins. Several prolyl isomerases of the FK506-binding protein family, such as trigger factor, SlyD, and FkpA, contain chaperone domains and are assumed to assist protein folding in vivo. The prolyl isomerase activity of FK506-binding proteins strongly depends on the nature of residue Xaa of the Xaa-Pro bond. We confirmed this in assays with a library of tetrapeptides in which position Xaa was occupied by all 20 aa. A high sequence specificity seems inconsistent with a generic function of prolyl isomerases in protein folding. Accordingly, we constructed a library of protein variants with all 20 aa at position Xaa before a rate-limiting cis proline and used it to investigate the performance of trigger factor and SlyD as catalysts of proline-limited folding. The efficiencies of both prolyl isomerases were higher than in the tetrapeptide assays, and, intriguingly, this high activity was almost independent of the nature of the residue before the proline. Apparently, the almost indiscriminate binding of the chaperone domain to the refolding protein chain overrides the inherently high sequence specificity of the prolyl isomerase site. The catalytic performance of these folding enzymes is thus determined by generic substrate recognition at the chaperone domain and efficient transfer to the active site in the prolyl isomerase domain.

Prolyl cis/trans isomerizations determine the rates of protein folding reactions and can serve as molecular switches and timers. In the gene-3-protein of filamentous phage, Pro-213 trans → cis isomerization in a hinge region controls the assembly of the 2 domains N1 and N2 and, in reverse, the activation of the phage for infection. We elucidated the structural and energetic basis of this proline-limited domain assembly at the level of individual residues by real-time 2D NMR. A local cluster of inter-domain hydrogen bonds, remote from Pro-213, is stabilized up to 3,000-fold by trans → cis isomerization. This network of hydrogen bonds mediates domain assembly and is connected with Pro-213 by rigid backbone segments. Thus, proline cis/trans switching is propagated in a specific and directional fashion to change the protein structure and stability at a distant position.

Prolyl cis/trans isomerizations determine the rates of many protein-folding reactions, and they can serve as molecular switches and timers. The energy required to shift the prolyl cis/trans equilibrium during these processes originates from conformational reactions that are linked structurally and energetically with prolyl isomerization. We used the N2 domain of the gene-3-protein of phage fd to elucidate how such an energetic linkage develops in the course of folding. The Asp160-Pro161 bond at the tip of a beta hairpin of N2 is cis in the crystal structure, but in fact, it exists as a mixture of conformers in folded N2. During refolding, about 10 kJ mol(-1) of conformational energy becomes available for a 75-fold shift of the cis/trans equilibrium constant at Pro161, from 7/93 in the unfolded to 90/10 in the folded form. We combined single- and double-mixing kinetic experiments with a mutational analysis to identify the structural origin of this proline shift energy and to elucidate the molecular path for the transfer of this energy to Pro161. It originates largely, if not entirely, from the two-stranded beta sheet at the base of the Pro161 hairpin. The two strands improve their stabilizing interactions when Pro161 is cis, and this stabilization is propagated to Pro161, because the connector peptides between the beta strands and Pro161 are native-like folded when Pro161 is cis. In the presence of a trans-Pro161, the connector peptides are locally unfolded, and thus, Pro161 is structurally and energetically uncoupled from the beta sheet. Such interrelations between local folding and prolyl isomerization and the potential modulation by prolyl isomerases might also be used to break and reestablish slow communication pathways in proteins.

Seven in one blow: The efficient formation of mixed disulfides on the thiol-rich fusion protein A followed by subsequent intein cleavage gave the fragment B with all seven cysteines protected against oxidation. The native chemical ligation of B with synthetic glycopeptide thioesters provides glycoproteins.

Summary SlyD (sensitive to lysis D) is a putative folding helper from the bacterial cytosol and harbors prolyl isomerase and chaperone activities. We determined the solution NMR structure of a truncated version of SlyD (1–165) from Escherichia coli (SlyD⁎) that lacks the presumably unstructured C-terminal tail. SlyD⁎ consists of two well-separated domains: the FKBP domain, which harbors the prolyl isomerase activity, and the insert-in-flap (IF) domain, which harbors the chaperone activity. The IF domain is inserted into a loop of the FKBP domain near the prolyl isomerase active site. The NMR structure of SlyD⁎ showed no distinct orientation of the two domains relative to each other. In the FKBP domain, Tyr68 points into the active site, which might explain the lowered intrinsic prolyl isomerase activity and the much lower FK506 binding affinity of the protein compared with archetype human FKBP12 (human FK506 binding protein with 12 kDa). The thermodynamics and kinetics of substrate binding by SlyD⁎ were quantified by fluorescence resonance energy transfer. NMR titration experiments revealed that the IF domain recognizes and binds unfolded or partially folded proteins and peptides. Insulin aggregation is markedly slowed by SlyD⁎ as evidenced by two-dimensional NMR spectroscopy in real time, probably due to SlyD⁎ binding to denatured insulin. The capacity of the IF domain to establish an initial encounter–collision complex, together with the flexible orientation of the two interacting domains, makes SlyD⁎ a very powerful catalyst of protein folding.

SlyD, the sensitive-to-lysis protein from Escherichia coli, consists of two domains. They are not arranged successively along the protein chain, but one domain, the "insert-in-flap" (IF) domain, is inserted internally as a guest into a surface loop of the host domain, which is a prolyl isomerase of the FK506 binding protein (FKBP) type. We used SlyD as a model to elucidate how such a domain insertion affects the stability and folding mechanism of the host and the guest domain. For these studies, the two-domain protein was compared with a single-domain variant SlyDDeltaIF, SlyD* without the chaperone domain (residues 1-69 and 130-165) in which the IF domain was removed and replaced by a short loop, as present in human FKBP12. Equilibrium unfolding and folding kinetics followed an apparent two-state mechanism in the absence and in the presence of the IF domain. The inserted domain decreased, however, the stability of the host domain in the transition region and decelerated its refolding reaction by about 10-fold. This originates from the interruption of the chain connectivity by the IF domain and its inherent instability. To monitor folding processes in this domain selectively, a Trp residue was introduced as fluorescent probe. Kinetic double-mixing experiments revealed that, in intact SlyD, the IF domain folds and unfolds about 1000-fold more rapidly than the FKBP domain, and that it is strongly stabilized when linked with the folded FKBP domain. The unfolding limbs of the kinetic chevrons of SlyD show a strong downward curvature. This deviation from linearity is not caused by a transition-state movement, as often assumed, but by the accumulation of a silent unfolding intermediate at high denaturant concentrations. In this kinetic intermediate, the FKBP domain is still folded, whereas the IF domain is already unfolded.

To fully explore the substrate specificities of prolyl isomerases, we synthesized a library of 20 tetrapeptides that are labeled with a 2-aminobenzoyl (Abz) group at the amino terminus and a p-nitroanilide (pNA) group at the carboxy terminus. In this peptide library of the general formula Abz-Ala-Xaa-Pro-Phe-pNA, the position Xaa before the proline is occupied by all 20 proteinogenic amino acids. A conformational analysis of the peptide by molecular dynamics simulations and byNMRspectroscopy showed that the mutual distance between the Abz and pNA moieties in the peptides depends on the isomeric state of the Xaa-Pro bond. In the cis, but not in the trans form, there are significant chemical shift changes of the Abz and pNA moieties, because their aromatic rings are close to each other. This proximity also leads to a strong quenching of Abz fluorescence, which, in combination with a solvent jump, was used to devise a sensitive assay for prolyl isomerases. Unlike the traditional assay, it is not coupled with peptide proteolysis and thus can be employed for protease-sensitive prolyl isomerases as well. The peptide library was used to provide a complete set of P1-site specificities for prototypic human members of the three prolyl isomerase families, FKBP12, cyclophilin 18, and parvulin 14. In a second application, the substrate specificity of SlyD, a protease-sensitive prolyl isomerase from Escherichia coli, was characterized and compared with that of human FKBP12 as well as with homologues from other bacteria. © 2009 American Chemical Society.

In vitro selections of stabilized proteins lead to more robust enzymes and, at the same time, yield novel insights into the principles of protein stability. We employed Proside, a method of in vitro selection, to find stabilized variants of TEM-1 β-lactamase from Escherichia coli . Proside links the increased protease resistance of stabilized proteins to the infectivity of a filamentous phage. Several libraries of TEM-1 β-lactamase variants were generated by error-prone PCR, and variants with increased protease resistance were obtained by raising temperature or guanidinium chloride concentration during proteolytic selections. Despite the small size of phage libraries, several strongly stabilizing mutations could be obtained, and a manual combination of the best shifted the profiles for thermal unfolding and temperature-dependent inactivation of β-lactamase by almost 20 °C to a higher temperature. The wild-type protein unfolds in two stages: from the native state via an intermediate of the molten-globule type to the unfolded form. In the course of the selections, the native protein was stabilized by 27 kJ mol − 1 relative to the intermediate and the cooperativity of unfolding was strongly increased. Three of our stabilizing replacements (M182T, A224V, and R275L) had been identified independently in naturally occurring β-lactamase variants with extended substrate spectrum. In these variants, they acted as global suppressors of destabilizations caused by the mutations in the active site. The comparison between the crystal structure of our best variant and the crystal structure of the wild-type protein indicates that most of the selected mutations optimize helices and their packing. The stabilization by the E147G substitution is remarkable. It removes steric strain that originates from an overly tight packing of two helices in the wild-type protein. Such unfavorable van der Waals repulsions are not easily identified in crystal structures or by computational approaches, but they strongly reduce the conformational stability of a protein.

The three disulfide bonds of the gene-3-protein of the phage fd are essential for the conformational stability of this protein, and it unfolds when they are removed by reduction or mutation. Previously, we used an iterative in vitro selection strategy to generate a stable and functional form of the gene-3-protein without these disulfides. It yielded optimal replacements for the disulfide bonds as well as several stabilizing second-site mutations. The best selected variant showed a higher thermal stability compared with the disulfide-bonded wild-type protein. Here, we investigated the molecular basis of this strong stabilization by solving the crystal structure of this variant and by analyzing the contributions to the conformational stability of the selected mutations individually. They could mostly be explained by improved side-chain packing. The R29W substitution alone increased the midpoint of the thermal unfolding transition by 14 deg and the conformational stability by about 25 kJ mol(-1). This key mutation (i) removed a charged side chain that forms a buried salt bridge in the disulfide-containing wild-type protein, (ii) optimized the local packing with the residues that replace the C46-C53 disulfide and (iii) improved the domain interactions. Apparently, certain residues in proteins indeed play key roles for stability.

In folded proteins, prolyl peptide bonds are usually thought to be either trans or cis because only one of the isomers can be accommodated in the native folded protein. For the N-terminal domain of the gene-3 protein of the filamentous phage fd (N2 domain), Pro161 resides at the tip of a beta hairpin and was found to be cis in the crystal structure of this protein. Here we show that Pro161 exists in both the cis and the trans conformations in the folded form of the N2 domain. We investigated how conformational folding and prolyl isomerization are coupled in the unfolding and refolding of N2 domain. A combination of single-mixing and double-mixing unfolding and refolding experiments showed that, in unfolded N2 domain, 7% of the molecules contain a cis-Pro161 and 93% of the molecules contain a trans-Pro161. During refolding, the fraction of molecules with a cis-Pro161 increases to 85%. This implies that 10.3 kJ mol(-1) of the folding free energy was used to drive this 75-fold change in the Pro161 cis/trans equilibrium constant during folding. The stabilities of the forms with the cis and the trans isomers of Pro161 and their folding kinetics could be determined separately because their conformational folding is much faster than the prolyl isomerization reactions in the native and the unfolded proteins. The energetic coupling between conformational folding and Pro161 isomerization is already fully established in the transition state of folding, and the two isomeric forms are thus truly native forms. The folding kinetics are well described by a four-species box model, in which the N2 molecules with either isomer of Pro161 can fold to the native state and in which cis/trans isomerization occurs in both the unfolded and the folded proteins.

Sometimes intravenous administration of cyclosporine (CsA) is essential before oral administration is possible. There are only a few reports available on the interindividual variability of CsA metabolism and different metabolite pattern depending on intravenous versus oral administration of CsA in heart transplant (HTx) patients. For effective inhibition of calcineurin we used a short infusion reaching peak concentrations after 2 hours. In a prospective cross-over study we compared the pharmacokinetics of CsA and its metabolites after oral (2.0 mg/kg body weight) versus intravenous (0.7 mg/kg body weight; 2-hour infusion) CsA administration (single test dose) in 7 pre-HTx patients. The pharmacokinetic parameters of CsA and its metabolites were analyzed using high-pressure liquid chromatography. The pharmacokinetic parameter area under the concentration time curve (AUC(0-∞)) of CsA after intravenous administration was significantly lower (2903 ng*h*mL−1) than that after oral administration (4344 ng*h*mL−1; P = .01). Peak concentrations, time to peak concentration, and terminal elimination half life were not significantly different. Short-time infusion of CsA resulted in a significant decrease in the AUC of the metabolites AM1 (3-fold), AM9 (10-fold), and AM1c (3-fold). A 2-hour infusion of CsA is just as effective as oral administration and the reduced amount of metabolites is advantageous for the patient.

Unfolding usually leads to the loss of the biological function of a protein. Here, we show that an unfolding reaction activates the gene-3-protein of the filamentous phage fd for its function during the infection of Escherichia coli. Before infection, the gene-3-protein is in a fully folded locked form, in which the binding site for the phage receptor TolA is buried at the domain interface. To expose this binding site, the gene-3-protein must be activated, and previously we identified the cis-to-trans isomerization at Pro213 in the hinge region between the two domains as a key step of activation. We now report that Pro213 isomerization destabilizes the protein and leads to a loss of folded structure, presumably in the hinge region. The partially unfolded form of the gene-3-protein is metastable, and trans-Pro213 arrests the protein in this activated form for an extended time, long enough to find the receptor TolA. The partial unfolding and its timing by prolyl isomerization are essential for the biological function.

The p19INK4d protein consists of five ankyrin repeats (ANK) and controls the human cell cycle by inhibiting the cyclin D-dependent kinases (CDK) 4 and 6. We investigated the folding of p19INK4d by urea-induced unfolding transitions, kinetic analyses of unfolding and refolding, including double-mixing experiments and a special assay for folding intermediates. Folding is a sequential two-step reaction via a hyperfluorescent on-pathway intermediate. This intermediate is present under all conditions, during unfolding, refolding and at equilibrium. The folding mechanism was confirmed by a quantitative global fit of a consistent set of equilibrium and kinetic data revealing the thermodynamics and intrinsic folding rates of the different states. Surprisingly, the N ↔ I transition is much faster compared to the I ↔ U transition. The urea-dependence of the intrinsic folding rates causes population of the intermediate at equilibrium close to the transition midpoint. NMR detected hydrogen/deuterium exchange and the analysis of truncated variants showed that the C-terminal repeats ANK3-5 are already folded in the on-pathway intermediate, whereas the N-terminal repeats 1 and 2 are not folded. We suggest that during refolding, repeats ANK3–ANK5 first form the scaffold for the subsequent assembly of repeats ANK1 and ANK2. The binding function of p19INK4d resides in the latter repeats. We propose that the graded stability and the facile unfolding of repeats 1 and 2 is a prerequisite for the down-regulation of the inhibitory activity of p19INK4d during the cell-cycle.

The catalytic activity of human FKBP12 as a prolyl isomerase is high towards short peptides, but very low in proline-limited protein folding reactions. In contrast, the SlyD proteins, which are members of the FKBP family, are highly active as folding enzymes. They contain an extra "insert-in-flap" or IF domain near the prolyl isomerase active site. The excision of this domain did not affect the prolyl isomerase activity of SlyD from Escherichia coli towards short peptide substrates but abolished its catalytic activity in proline-limited protein folding reactions. The reciprocal insertion of the IF domain of SlyD into human FKBP12 increased its folding activity 200-fold and generated a folding catalyst that is more active than SlyD itself. The IF domain binds to refolding protein chains and thus functions as a chaperone module. A prolyl isomerase catalytic site and a separate chaperone site with an adapted affinity for refolding protein chains are the key elements for a productive coupling between the catalysis of prolyl isomerization and conformational folding in the enzymatic mechanisms of SlyD and other prolyl isomerases, such as trigger factor and FkpA.

The signal adapter protein c-CrkII from chicken but not from human uses isomerization at Pro238 in the SH3C domain to regulate the activity of the SH3N domain. The different behavior of human and chicken c-CrkII originates from only two differences in sequence, at positions 239 after Pro238 and 272 in the N-Src loop of SH3C. We analyzed the kinetics of substrate binding to SH3N and an assay for its coupling with Pro238 isomerization in SH3C to identify the molecular path from Pro238 to the substrate binding site of SH3N. The trans→cis isomerization at Pro238 and a relocation of Phe239 re-organize the energetics of a hydrophobic cluster in the N-Src loop of SH3C and re-shape this region to optimize its interactions with SH3N. Concomitantly, the backbone becomes strained at Met272. We suggest that, in human c-CrkII, movement at position 239 and strain at position 272 are not tolerated because the β-branched residues Ile239 and Val272 restrain the backbone mobility and thus destabilize the cis Pro238 form.

The cold shock protein CspB shows a five-stranded beta-sheet structure, and it folds rapidly via a native-like transition state. A previous Phi value analysis showed that most of the residues with Phi values close to one reside in strand beta1, and two of them, Lys5 and Lys7 are partially exposed charged residues. To elucidate how coulombic interactions of these two residues contribute to the energetic organisation of the folding transition state we performed comparative folding experiments in the presence of an ionic denaturant (guanidinium chloride) and a non-ionic denaturant (urea) and a double-mutant analysis. Lys5 contributes 6.6 kJ mol(-1) to the stability of the transition state, and half of it originates from screenable coulombic interactions. Lys7 contributes 5.3 kJ mol(-1), and 3.4 kJ mol(-1) of it are screened by salt. In the folded protein Lys7 interacts with Asp25, and the screenable coulombic interaction between these two residues is fully formed in the transition state. This suggests that long-range coulombic interactions such as those originating from Lys5 and Lys7 of CspB can be important for organizing and stabilizing native-like structure early in protein folding.

The two-state folding reaction of the cold shock protein from Bacillus caldolyticus (Bc-Csp) is preceded by a rapid chain collapse. A fast shortening of intra-protein distances was revealed by Förster resonance energy transfer (FRET) measurements with protein variants that carried individual pairs of donor and acceptor chromophores at various positions along the polypeptide chain. Here we investigated the specificity of this rapid compaction. Energy transfer experiments that probed the stretching of strand beta2 and the close approach between the strands beta1 and beta2 revealed that the beta1-beta2 hairpin is barely formed in the collapsed form, although it is native-like in the folding transition state of Bc-Csp. The time course of the collapse could not be resolved by pressure or temperature jump experiments, indicating that the collapsed and extended forms are not separated by an energy barrier. The co-solute (NH4)2SO4 stabilizes both native Bc-Csp and the collapsed form, which suggests that the large hydrated SO4(2-) ions are excluded from the surface of the collapsed form in a similar fashion as they are excluded from folded Bc-Csp. Ethylene glycol increases the stability of proteins because it is excluded preferentially from the backbone, which is accessible in the unfolded state. The collapsed form of Bc-Csp resembles the unfolded form in its interaction with ethylene glycol, suggesting that in the collapsed form the backbone is still accessible to water and small molecules. Our results thus rule out that the collapsed form is a folding intermediate with native-like chain topology. It is better described as a mixture of compact conformations that belong to the unfolded state ensemble. However, some of its structural elements are reminiscent of the native protein.

Improving the stability of proteins is a major aim in basic and applied protein science. Querol and coworkers calculated changes in the quasi-electric dipole moment of a protein and used it as a simple criterion to predict stabilizing charge mutations. They employed this method to propose for the bacterial cold shock protein Bc-Csp a number of charge mutations that should have a strong influence on stability. We produced eight variants of Bc-Csp with such mutations and measured their stabilities experimentally. However, we could not find a correlation between the stability and the quasi dipole moment of these variants. Possibly, the quasi dipole moment reflects only a secondary aspect of the changes that are caused by charge mutations in a protein.

Disulfide bonds provide major contributions to the conformational stability of proteins, and their cleavage often leads to unfolding. The gene-3-protein of the filamentous phage fd contains two disulfides in its N1 domain and one in its N2 domain, and these three disulfide bonds are essential for the stability of this protein. Here, we employed in vitro evolution to generate a disulfide-free variant of the N1-N2 protein with a high conformational stability. The gene-3-protein is essential for the phage infectivity, and we exploited this requirement for a proteolytic selection of stabilized protein variants from phage libraries. First, optimal replacements for individual disulfide bonds were identified in libraries, in which the corresponding cysteine codons were randomized. Then stabilizing amino acid replacements at non-cysteine positions were selected from libraries that were created by error-prone PCR. This stepwise procedure led to variants of N1-N2 that are devoid of all three disulfide bonds but stable and functional. The best variant without disulfide bonds showed a much higher conformational stability than the disulfide-containing wild-type form of the gene-3-protein. Despite the loss of all three disulfide bonds, the midpoints of the thermal transitions were increased from 48.5 degrees C to 67.0 degrees C for the N2 domain and from 60.0 degrees C to 78.7 degrees C for the N1 domain. The major loss in conformational stability caused by the removal of the disulfides was thus over-compensated by strongly improved non-covalent interactions. The stabilized variants were less infectious than the wild-type protein, probably because the domain mobility was reduced. Only a small fraction of the sequence space could be accessed by using libraries created by error-prone PCR, but still many strongly stabilized variants could be identified. This is encouraging and indicates that proteins can be stabilized by mutations in many different ways.

Unfolded ribonuclease A consists of a mixture of fast-folding (UF) and slow-folding species (US); US folds slowly because it contains non-native proline isomers. The folding kinetics of US have been determined by measuring the changes in tyrosine fluorescence upon refolding. Under conditions where the energy of stabilization of the native protein is small (in marginally native conditions) the fluorescence-detected kinetics of folding coincide with the ones measured by other probes. However, when refolding is carried out under conditions where the native protein is highly stabilized (in strongly native conditions), the fluorescence changes become progressively slower than folding monitored by tyrosine absorbance or by 2′CMP binding. Under these conditions the fluorescence-detected kinetics of folding show properties of proline isomerization reactions. In addition they match proline isomerization measured during refolding of Us by a two-step assay for non-native proline isomers. The following conclusions are drawn. (1) There is a kinetic intermediate between US and the native enzyme in the folding pathway of RNase A. This has been shown by the divergent progress curves monitored by different probes. Although the intermediate contains non-native proline isomers, it is folded and hence sensitive to agents that affect the stability of native proteins. (2) Fluorescence-detected folding closely follows proline isomerization during folding. Refolding of US is not blocked by incorrect prolinc isomers, but US is able to fold to a structural intermediate before proline isomerization occurs. (3) The quantum yield of the fluorescence of native RNase A depends on the precise spatial location of the tyrosine side chains with respect to their hydrogen bond acceptors and to the disulfide bonds. Therefore the native fluorescence is not regained until all essential proline peptide bonds are in the right configuration.

Unfolded ribonuclease A (RNase A) consists of a mixture of fast refolding (UF) and slow-refolding (US) species. The slow UF⇌US equilibration reaction is rate-limited by proline peptide bond isomerization. Investigations of the dependence on temperature of the UF⇌US equilibrium have led to conflicting results and different molecular interpretations. Here the dependence on temperature of the UF: US ratio was reinvestigated by using a new assay for the fast-folding molecules UF. Between 0°C and 60°C the proportion of UF present in unfolded RNase A at 6M guanidine · HCl was found to be independent of temperature. Consequently, no conclusions can be drawn regarding the role and importance of particular prolines in the UF⇌US transition solely from these results.

The gene-3 protein (G3P) of filamentous phages is essential for the infection of Escherichia coli. The carboxy-terminal domain anchors this protein in the phage coat, whereas the two amino-terminal domains N1 and N2 protrude from the phage surface. We analyzed the folding mechanism of the two-domain fragment N1-N2 of G3P (G3P(*)) and the interplay between folding and domain assembly. For this analysis, a variant of G3P(*) was used that contained four stabilizing mutations (IIHY-G3P(*)). The observed refolding kinetics extend from 10 ms to several hours. Domain N1 refolds very rapidly (with a time constant of 9.4 ms at 0.5 M guanidinium chloride, 25 degrees C) both as a part of IIHY-G3P(*) and as an isolated protein fragment. The refolding of domain N2 is slower and involves two reactions with time constants of seven seconds and 42 seconds. These folding reactions of the individual domains are followed by a very slow, spectroscopically silent docking process, which shows a time constant of 6200 seconds. This reaction was detected by a kinetic unfolding assay for native molecules. Before docking, N1 and N2 unfold fast and independently, after docking they unfold slowly in a correlated fashion. A high energy barrier is thus created by domain docking, which protects G3P kinetically against unfolding. The slow domain docking is possibly important for the infection of E.coli by the phage. Upon binding to the F pilus, the N2 domain separates from N1 and the binding site for TolA on domain N1 is exposed. Since domain reassembly is so slow, this binding site remains accessible until pilus retraction has brought N1 close to TolA on the bacterial surface.

Prolyl isomerizations are intrinsically slow processes. They determine the rates of many protein folding reactions and control regulatory events in folded proteins. Prolyl isomerases are able to catalyze these isomerizations, and thus, they have the potential to assist protein folding and to modulate protein function. Here, we provide examples for how prolyl isomerizations limit protein folding and are accelerated by prolyl isomerases and how native-state prolyl isomerizations regulate protein functions. The roles of prolines in protein folding and protein function are closely interrelated because both of them depend on the coupling between cis/trans isomerization and conformational changes that can involve extended regions of a protein.

The cold-shock protein CspB folds rapidly in a N ⇄ U two-state reaction via a transition state that is about 90% native in its interactions with denaturants and water. This suggested that the energy barrier to unfolding is overcome by processes occurring in the protein itself, rather than in the solvent. Nevertheless, CspB unfolding depends on the solvent viscosity. We determined the activation volumes of unfolding and refolding by pressure-jump and high-pressure stopped-flow techniques in the presence of various denaturants. The results obtained by these methods agree well. The activation volume of unfolding is positive ( Δ V NU ‡ =16(±4) ml / mol ) and virtually independent of the nature and the concentration of the denaturant. We suggest that in the transition state the protein is expanded and water molecules start to invade the hydrophobic core. They have, however, not yet established favorable interactions to compensate for the loss of intra-protein interactions. The activation volume of refolding is positive as well ( Δ V UN ‡ =53(±6) ml / mol ) and, above 3 M urea, independent of the concentration of the denaturant. At low concentrations of urea or guanidinium thiocyanate, Δ V UN ‡ decreases significantly, suggesting that compact unfolded forms become populated under these conditions.

In previous work, we had identified stabilized forms of the cold-shock protein Bs-CspB from Bacillus subtilis in a combinatorial library by an in vitro selection procedure. In this library, the sequence positions 2, 3, 46, 64, 66, and 67 had been randomized, because Bs-CspB differs from the naturally thermostable homolog Bc-Csp from Bacillus caldolyticus, among others, at these six positions. For the most stable selected variant, the midpoint of thermal unfolding (tM) increased by 28.2 deg. C and the Gibbs free energy of unfolding (ΔGD) by 19 kJ/mol. Here, we analyzed by site-directed mutagenesis how the selected residues contribute individually to this strong stabilization. Val3 and Val66, which replace Glu3 and Glu66 of wild-type Bs-CspB, each contribute about 7 kJ/mol to stability, the Thr64Arg substitution contributes 4.5 kJ/mol, and 3.2 kJ/mol originate from the Ala46Leu replacement. Gly67 at the carboxy terminus is unimportant for stability, the Arg selected at position 2 is overall slightly destabilizing but improves the coulombic interactions. The best variant differs from Bc-Csp at all six positions; nevertheless, natural and in vitro selection followed similar principles. In both cases, negatively charged residues at the adjacent positions 3 and 66 are avoided, and a positively charged residue is introduced into this area of the protein surface. Its exact location is unimportant. It can be at position 3, as in the thermophilic Bc-Csp, or at positions 2 or 64, as in the most stable selected variant. These positively charged residues contribute to stability not by engaging in pairwise coulombic interactions with a specific carboxyl group, but by generally improving the charge distribution in this particular region of the protein surface. These coulombic effects contribute significantly to the thermostability of the cold-shock proteins. They are only weakly interdependent and best explained by the presence of a flexible ion network at the protein surface. Our results emphasize that surface positions are very good candidates for optimizing protein stability.

c-CrkII is a central signal adapter protein. A domain opening/closing reaction between its N- and C-terminal Src homology 3 domains (SH3N and SH3C, respectively) controls signal propagation from upstream tyrosine kinases to downstream targets. In chicken but not in human c-CrkII, opening/closing is coupled with cis/trans isomerization at Pro-238 in SH3C. Here, we used advanced double-mixing experiments and kinetic simulations to uncover dynamic domain interactions in c-CrkII and to elucidate how they are linked with cis/trans isomerization and how this regulates substrate binding to SH3N. Pro-238 trans → cis isomerization is not a simple on/off switch but converts chicken c-CrkII from a high affinity to a low affinity form. We present a double-box model that describes c-CrkII as an allosteric system consisting of an open, high affinity R state and a closed, low affinity T state. Coupling of the T-R transition with an intrinsically slow prolyl isomerization provides c-CrkII with a kinetic memory and possibly functions as a molecular attenuator during signal transduction.

Background: Prolyl cis/trans isomerizations have long been known as critical and rate-limiting steps in protein folding. Results: Now it is clear that they are also used as slow conformational switches and molecular timers in the regulation of protein activity. Here we describe several such proline switches and how they are regulated. Conclusions and general significance: Prolyl isomerizations can function as attenuators and provide allosteric systems with a molecular memory. This article is part of a Special Issue entitled Proline-directed Foldases: Cell Signaling Catalysts and Drug Targets.

Mia40 (a mitochondrial import and assembly protein) catalyzes disulfide bond formation in proteins in the mitochondrial intermembrane space. By using Cox17 (a mitochondrial copper-binding protein) as a natural substrate, we discovered that, in the presence of Mia40, the formation of native disulfides is strongly favored. The catalytic mechanism of Mia40 involves a functional interplay between the chaperone site and the catalytic disulfide. Mia40 forms a specific native disulfide in Cox17 much more rapidly than other disulfides, in particular, non-native ones, which originates from the recently described high affinity for hydrophobic regions near target cysteines and the long lifetime of the mixed disulfide. In addition to its thiol oxidase function, Mia40 is active also as a disulfide reductase and isomerase. We found that species with inadvertently formed incorrect disulfides are rebound by Mia40 and reshuffled, revealing a proofreading mechanism that is steered by the conformational folding of the substrate protein.

The signaling protein CrkII switches between forms with high or low binding affinity. Both phosphorylation and native-state prolyl isomerization were suggested to regulate the transition between these forms. Here we analyzed how phosphorylation at Tyr222 and Tyr252 and the Pro238Ala substitution affect signal transfer of human and chicken CrkII to a downstream target. Human CrkII is regulated by phosphorylation only, but chicken CrkII is regulated by Pro238 trans→cis isomerization and by Tyr222 phosphorylation. Surprisingly, they act in an independent fashion. Apparently, the allosteric transition to a low-activity form can be induced by phosphorylation or prolyl isomerization located at distant sites in CrkII.

Residues Arg3 and Leu66 are crucially important for the enhanced stability of the cold shock protein Bc-Csp from the thermophile Bacillus caldolyticus relative to its homologue Bs-CspB from the mesophile Bacillus subtilis. Arg3, which replaces Glu3 of Bs-CspB, accounts for two-thirds of the stability difference and for the entire difference in Coulombic interactions between the two proteins. Leu66, which replaces Glu66 of Bs-CspB, contributes additional hydrophobic interactions. To elucidate the role of these two residues near the chain termini for the rapid folding of the cold shock proteins, we performed an extensive mutational analysis of the folding kinetics to characterize interactions between residues 3, 46, and 66 in the transition state of folding. We employed a pressure-jump apparatus which allows folding to be followed over a broad range of temperatures and urea concentrations in the time range of microseconds to minutes. The N-terminal region folds early, and the interactions that originate from residue 3 are present to a large extent in the transition state already. They include a hydrophobic contribution, a general electrostatic stabilization by the positive charge of Arg3 in Bc-Csp, and a pairwise Coulombic repulsion with Glu46 in the Arg3Glu variant. The C-terminus appears to be largely unfolded in the transition state. The interactions of Leu66, including those with the already structured N-terminal region, are established only after passage through the transition state. The N- and C-termini of the cold shock proteins thus contribute differently to the folding kinetics, although they are very close in space in the folded protein.

The cold shock proteins Bc-Csp from the thermophile Bacillus caldolyticus and Bs-CspB from the mesophile Bacillus subtilis differ significantly in their conformational stability, although the two proteins differ by only 12 out of 67 amino acid residues. The three-dimensional structure of these small and compact β-barrel proteins without disulfide bonds, cis-proline residues or tightly bound cofactors is very similar. Previous work has shown that Bc-Csp displays a twofold increase in the free energy of stabilization relative to its homolog Bs-CspB, and indicated that electrostatic interactions are, in part, responsible for this effect. It was further described that the stability difference is almost exclusively due to surface-exposed charged residues at sequence positions 3 and 66 of Bc-Csp and Bs-CspB, whereas all other amino acid changes between both proteins have no net effect on stability. To investigate how two surface residues determine the stability of Bc-Csp, Arg3 and Leu66 were replaced by glutamic acid, corresponding to the Bs-CspB sequence. The crystal structures of the resultant protein variants, Bc-Csp R3E and Bc-Csp L66E, were determined at 1.4 A and 1.27 A resolution, and refined to R values of 13.9 % and 15.8 %, respectively. Both structures closely resemble Bc-Csp in their global fold and show different hydrogen bonding and salt-bridge patterns when two independent molecules in the asymmetric unit of the crystal are compared. To extend the study to neighbored residues that help determine the surface charge around Arg3 and Leu66, the mutant proteins Bc-Csp E46A, Bc-Csp R3E/E46A/L66E and Bc-Csp V64T/L66E/67A were crystallized. Their structures were determined at resolutions of 1.8 A, 1.32 A and 1.8 A and refined to R values of 18.5 %, 13.8 % and 19.3 %, respectively. A systematic comparison of the crystal structures of all forms of the B. caldolyticus cold shock protein shows varying patterns of hydrogen bonds and electrostatic interactions around residues 3 and 66. Thermal destabilization of the protein by mutation appears to correlate with the extent of an acidic surface patch near the C-terminal carboxylate group.

Spinach starch debranching enzyme, a limit dextrinase or pullulanase (EC 3.2.1.41), is a monomeric protein of 100 kDa that produces up to seven coexisting and mutually interconvertible isomers of different specific activity, a phenomenon that has been termed microheterogeneity and for which a structural explanation has not yet been presented. The enzyme can be activated by reduction, in particular by thiol reagents, and inactivated by oxidation and the concomitant change of the patterns of its isomeric forms could be quantified by chromatofocusing. The hypothesis was examined that reduction of the enzyme's thiol groups shifts the isomer pattern towards the forms with a higher specific activity while oxidation favours the less active forms. Using TCEP as reductant only the form with the highest specific activity was obtained. This form was almost inaccessible for proteolysis by trypsin while the oxidized and GSH-activated enzyme yielded four peptides when treated with trypsin. Their sequence indicated cleavage predominantly of loops connecting the beta-strands and alpha-helices of the (beta/alpha)(8)-barrel which forms the catalytic site of the pullulanase. Formation of various disulphide bridges between the loops connecting the barrel structures -- predominantly on one side -- may be the reason for the microheterogeneity of the spinach pullulanase. In vivo, the enzyme maintains its activated state due to the high concentration of GSH in the chloroplast. However, the chloroplast's pH shifts from day (pH 8) to night (pH 7) and thus could also alter the activity of the protein in accordance with the required function in starch metabolism.

The bacterial cold shock proteins are small compact beta-barrel proteins without disulfide bonds, cis-proline residues or tightly bound cofactors. Bc-Csp, the cold shock protein from the thermophile Bacillus caldolyticus shows a twofold increase in the free energy of stabilization relative to its homolog Bs-CspB from the mesophile Bacillus subtilis, although the two proteins differ by only 12 out of 67 amino acid residues. This pair of cold shock proteins thus represents a good system to study the atomic determinants of protein thermostability. Bs-CspB and Bc-Csp both unfold reversibly in cooperative transitions with T(M) values of 49.0 degrees C and 77.3 degrees C, respectively, at pH 7.0. Addition of 0.5 M salt stabilizes Bs-CspB but destabilizes Bc-Csp. To understand these differences at the structural level, the crystal structure of Bc-Csp was determined at 1.17 A resolution and refined to R=12.5% (R(free)=17.9%). The molecular structures of Bc-Csp and Bs-CspB are virtually identical in the central beta-sheet and in the binding region for nucleic acids. Significant differences are found in the distribution of surface charges including a sodium ion binding site present in Bc-Csp, which was not observed in the crystal structure of the Bs-CspB. Electrostatic interactions are overall favorable for Bc-Csp, but unfavorable for Bs-CspB. They provide the major source for the increased thermostability of Bc-Csp. This can be explained based on the atomic-resolution crystal structure of Bc-Csp. It identifies a number of potentially stabilizing ionic interactions including a cation-binding site and reveals significant changes in the electrostatic surface potential.

There has been some debate as to whether protein folding involves diffusive chain motions and thus depends on solvent viscosity. The interpretation of folding kinetics in viscous solvents has remained difficult and controversial, in that viscogenic agents affect folding rates not only by increasing solvent viscosity but also by increasing protein stability. By carefully choosing experimental conditions, we can now eliminate the effect on stability and show that the folding dynamics of the cold shock protein CspB are viscosity dependent. Thus Kramers' theory of reaction rates rather than transition state theory should be used to describe this folding reaction.

The rate-limiting step during the refolding of S54G/P55N ribonuclease T1 is determined by the slow trans-->cis prolyl isomerisation of Pro39. We investigated the refolding of this variant by one-dimensional (1D) and two-dimensional (2D) real-time NMR spectroscopy, initiated by a tenfold dilution from 6 M guanidine hydrochloride at 10 degreesC. Two intermediates could be resolved with the 1D approach. The minor intermediate, which is only present early during refolding, is largely unfolded. The major intermediate, with an incorrect trans Pro39 peptide bond, is highly structured with 33 amide protons showing native chemical shifts and native NOE patterns. They could be assigned in a real-time 2D-NOESY (nuclear Overhauser enhancement spectroscopy) by using a new assignment strategy to generate positive and negative signal intensities for native and non-native NOE cross-peaks, respectively. Surprisingly, amide protons with non-native environments are located not only close to Tyr38-Pro39, but are spread throughout the entire protein, including the C-terminal part of the alpha-helix, beta-strands 3 and 4 and several loop regions. Native secondary and tertiary structure was found for the major intermediate in the N-terminal beta-strands 1 and 2 and the C terminus (connected by the disulfide bonds), the N-terminal part of the alpha-helix, and the loops between beta-strands 4/5 and 5/6. Implications of these native and non-native structure elements of the intermediate for the refolding of S54G/P55N ribonuclease T1 and for cis/trans isomerizations are discussed.

In the cold-shock protein CspB from Bacillus subtilis three exposed Phe residues (F15, F17, and F27) are essential for its function in binding to single-stranded nucleic acids. Usually, the hydrophobic Phe side chains are buried in folded proteins. We asked here whether the exposition of the essential Phe residues could be a cause for the very low conformational stability of CspB. Urea-induced and heat-induced equilibrium unfolding transitions were measured for three mutants of CspB, where Phe 15, Phe 17, and Phe 27 were individually replaced by alanine. Unexpectedly, all three mutations strongly destabilized CspB. The aromatic side chains of Phe 15, Phe 17, and Phe 27 in the active site are thus important for both binding to nucleic acids and conformational stability. There is no compromise between function and stability in the active site. Model calculations indicate that, although they are partially exposed to solvent, all three Phe residues nevertheless lose accessible surface upon folding, and this should favor the native state. A different result is obtained with the F38A variant. Phe 38 is hyperexposed in native CspB, and its substitution by Ala is in fact stabilizing.

Prolyl isomerases accelerate the cis trans isomerization of prolyl peptide bonds during protein folding and probably also in folded proteins. We asked whether this catalytic function is in fact restricted to prolyl bonds or whether the isomerizations of 'normal' non-prolyl peptide bonds are catalyzed as well. By using the P39A variant of ribonuclease T1 as a substrate we find that the trans --> cis isomerization of the Tyr38-Ala39 bond in the refolding of this protein is not catalyzed by prolyl isomerases of the cyclophilin, FKBP and parvulin families. These enzymes are neither able to catalyze amide bond isomerizations in the proline-free model peptide Ala-Ala-Tyr-Ala-Ala.

Recently a new family of prolyl isomerases was discovered, which is unrelated with the cyclophilins or the FK-506 binding proteins. Parvulin, the smallest member of this new family, is a protein with only 92 residues, but parvulin-like domains occur in several large proteins that are apparently involved in protein folding or activation processes. We show here that, in addition to its activity in assays with proline-containing tetrapeptides, parvulin catalyzes the proline-limited folding of a variant of ribonuclease T1 with a kcat/Km value of 30,000 M-1 s-1. This value is much smaller than the kcat/Km value of 1.1x10(7) M-1 s-1 determined for the parvulin-catalyzed prolyl isomerization in the tetrapeptide succinyl-Ala-Leu-Pro-Phe-4-nitroanilide. Parvulin itself unfolds and refolds reversibly in a simple two-state reaction with a Gibbs free energy of stabilization of 28 kJ/mol at 10 degrees C. Most of the unfolded parvulin molecules refold in a slow reaction that involves prolyl isomerization and is catalyzed by cyclophilin, another prolyl isomerase. Moreover, parvulin accelerates its own refolding in an autocatalytic fashion, and the rate of refolding increases tenfold when the concentration of parvulin is increased from 0.5 to 3.0 microM. Apparently, small single-domain prolyl isomerases catalyze prolyl isomerization much better in short peptides than in protein folding reactions, presumably because the prolyl bonds are less accessible in refolding protein chains. It is possible that the additional domains of the large prolyl isomerases improve the affinity for protein substrates.

Mia40 catalyses the oxidative folding of disulphide-containing proteins in the mitochondria. The folding pathway is directed by the formation of the first mixed disulphide between Mia40 and its substrate. Here, we employ Cox17 to elucidate the molecular determinants of this reaction. Mia40 engages initially in a dynamic non-covalent enzyme–substrate complex that forms and dissociates within milliseconds. Cys36 of Cox17 forms the mixed disulphide in an extremely rapid reaction that is limited by the preceding complex formation with Mia40. Cys36 reacts much faster than the three other cysteines of Cox17, because it neighbours three hydrophobic residues. Mia40 binds preferentially to hydrophobic regions and the dynamic nature of the non-covalent complex allows rapid reorientation for an optimal positioning of the reactive cysteine. Mia40 thus uses the unique proximity between its substrate-binding site and the catalytic disulphide to select a particular cysteine for forming the critical initial mixed disulphide. Proteins containing multiple disulphide bonds fold more efficiently if these bonds are formed in a defined order. Koch et al.find that the mitochondrial thiol oxidase Mia40 achieves this by preferentially targeting cysteine residues within a hydrophobic context.

Folding enzymes often use distinct domains for the interaction with a folding protein chain and for the catalysis of intrinsically slow reactions such as prolyl cis/trans isomerization. Here, we investigated the refolding reaction of ribonuclease T1 in the presence of the prolyl isomerase SlyD from Escherichia coli to examine how this enzyme catalyzes the folding of molecules with an incorrect trans proline isomer and how it modulates the conformational folding of the molecules with the correct cis proline. The kinetic analysis suggests that prolyl cis → trans isomerization in the SlyD-bound state shows a rate near 100 s(-1) and is thus more than 10(4)-fold accelerated, relative to the uncatalyzed reaction. As a consequence of its fast binding and efficient catalysis, SlyD retards the conformational folding of the protein molecules with the correct cis isomer, because it promotes the formation of the species with the incorrect trans isomer. In the presence of ≥1 μM SlyD, protein molecules with cis and trans prolyl isomers refold with identical rates, because SlyD-catalyzed cis/trans equilibration is faster than conformational folding. The cis or trans state of a particular proline is thus no longer a determinant for the rate of folding.

Chaperonins prevent the aggregation of partially folded or misfolded forms of a protein and, thus, keep it competent for productive folding. It was suggested that GroEL, the chaperonin of Escherichia coli, exerts this function 1 unfolding such intermediates, presumably in a catalytic fashion. We investigated the kinetic mechanism of GroEL-induced protein unfolding by using a reduced and carbamidomethylated variant of RNase T1, RCAM-T1, as a substrate. RCAM-T1 cannot fold to completion, because the two disulfide bonds are missing, and it is, thus, a good model for long-lived folding intermediates. RCAM-T1 unfolds when GroEL is added, but GroEL does not change the microscopic rate constant of unfolding, ruling out that it catalyzes unfolding. GroEL unfolds RCAM-T1 because it binds with high affinity to the unfolded form of the protein and thereby shifts the overall equilibrium toward the unfolded state. GroEL can unfold a partially folded or misfolded intermediate by this thermodynamic coupling mechanism when the Gibbs free energy of the binding to GroEL is larger than the conformational stability of the intermediate and when the rate of its unfolding is high.