Search

Here we demonstrate a theory-driven, novel dual-shell coating system of Li2SrSiO4 and Al2O3, achieved via a facile and scalable sol-gel technique on LiCoO2 electrode particles. The optimal thickness of each coating can lead to increased specific capacity (∼185 mAh/g at 0.5 C-rate) at a cut-off potential of 4.5 V, and greater cycling stability at very high C rates (up to 10 C) in half-cells with lithium metal. The mechanism of this superior performance was investigated using a combination of X-ray and electron characterization methods. It shows that the results of this investigation can inform future studies to identify still better dual-shell coating schemes, achieved by such industrially feasible techniques, for application on similar, nickel-rich cathode materials.

The local coordination environment around catalytically active sites plays a vital role in tuning the activity of electrocatalysts made of carbon-supported metal nanoparticles. However, the rational design of electrocatalysts with improved performance by controlling this environment is hampered by synthetic limitations and insufficient mechanistic understanding of how the catalytic phase forms. Here we show that introducing F atoms into Pd/N–C catalysts modifies the environment around the Pd and improves both activity and durability for the ethanol oxidation reaction and the oxygen reduction reaction. Our data suggest that F atom introduction creates a more N-rich Pd surface, which is favourable for catalysis. Durability is enhanced by inhibition of Pd migration and decreased carbon corrosion. A direct ethanol fuel cell that uses the Pd/N–C catalyst with F atoms introduced for both the ethanol oxidation reaction and oxygen reduction reaction achieves a maximum power density of 0.57 W cm−2 and more than 5,900 hours of operation. Pd/C catalysts containing other heteroatoms (P, S, B) can also be improved through the addition of F atoms. Metal- and N-coordinated carbon materials are promising electrocatalysts, but improved activity and stability are desirable for fuel cell applications. Chang et al. address this by introducing F atoms into Pd/N–C catalysts, modifying the environment around the Pd and enhancing performance for ethanol oxidation and oxygen reduction.

Single-atom catalysts (SACs) with 100% active sites have excellent prospects for application in the oxygen evolution reaction (OER). However, further enhancement of the catalytic activity for OER is quite challenging, particularly for the development of stable SACs with overpotentials

The ocean is an important inventory of anthropogenic mercury (Hg), yet the history of anthropogenic Hg accumulation in the ocean remains largely unexplored. Deep-sea corals are an emerging archive of past ocean chemistry, which take in sinking or suspended particulate organic matter as their food sources. Such organic matter would exchange Hg with the local seawater before being consumed by the deep, sea corals. As such, the organics preserved in the coral skeleton may record the Hg evolution of the ambient seawater during the time of coral growth. Here, we report the first data on Hg concentrations variability of a deep-sea proteinaceous coral in the oligotrophic North Pacific at the water depth of 1 249 m, in attempt to understand the transfer of anthropogenic Hg into the deep Pacific ocean over the last seven centuries. We find that the Hg concentrations of different coral growth layers have remained relatively constant albeit with considerable short-term variability through time. The overall stable Hg concentration of the last seven centuries recorded in our sample suggests that anthropogenic pollution is not yet a clearly resolvable component in the deep oligotrophic North Pacific waters, in agreement with recent estimation from modelling works and observational studies of modern seawater profiles. As there is hardly an unambiguous way to separate anthropogenic Hg from the natural background based on recent seawater profiles, our historical data provide valuable information helping to understand the oceanic cycle of Hg through time.

Highlights A facile ion-imprinting method (IIM) is used to synthesize the isolated Fe-N-C single-atomic site catalyst (IIM-Fe-SASC), which mimics the natural enzyme-like active site and shows excellent peroxidase-like activity.The ion-imprinting process can precisely control ion at the atomic level and form numerous well-defined single-atomic Fe-N-C sites.The IIM-Fe-SASC has been successfully used as the nanoprobe for in situ H2O2 detection generated from MDA-MB-231 cells. Supplementary Information The online version contains supplementary material available at 10.1007/s40820-021-00661-z., Fe-based single-atomic site catalysts (SASCs), with the natural metalloproteases-like active site structure, have attracted widespread attention in biocatalysis and biosensing. Precisely, controlling the isolated single-atom Fe-N-C active site structure is crucial to improve the SASCs’ performance. In this work, we use a facile ion-imprinting method (IIM) to synthesize isolated Fe-N-C single-atomic site catalysts (IIM-Fe-SASC). With this method, the ion-imprinting process can precisely control ion at the atomic level and form numerous well-defined single-atomic Fe-N-C sites. The IIM-Fe-SASC shows better peroxidase-like activities than that of non-imprinted references. Due to its excellent properties, IIM-Fe-SASC is an ideal nanoprobe used in the colorimetric biosensing of hydrogen peroxide (H2O2). Using IIM-Fe-SASC as the nanoprobe, in situ detection of H2O2 generated from MDA-MB-231 cells has been successfully demonstrated with satisfactory sensitivity and specificity. This work opens a novel and easy route in designing advanced SASC and provides a sensitive tool for intracellular H2O2 detection. Supplementary Information The online version contains supplementary material available at 10.1007/s40820-021-00661-z.

Changes in the local atomic arrangement in a crystal caused by lattice-mismatch-induced strain can efficiently regulate the performance of electrocatalysts for zinc–air batteries (ZABs) in many manners, mainly due to modulated electronic structure configurations that affect the adsorption energies for oxygen-intermediates formed during oxygen reduction and evolution reactions (ORR and OER). However, the application of strain engineering in electrocatalysis has been limited by the strain relaxation caused by structural instability such as dissolution and destruction, leading to insufficient durability towards the ORR/OER. Herein, we propose a doping strategy to modulate the phase transition and formation of self-supported cobalt fluoride–sulfide (CoFS) nanoporous films using a low amount of copper (Cu) as a dopant. This well-defined Cu–CoFS heterostructure overcomes the obstacle of structural instability. Our study of the proposed Cu–CoFS also helps establish the structure–property relationship of strained electrocatalysts by unraveling the role of local strain in regulating the electronic structure of the catalyst. As a proof-of-concept, the Cu–CoFS electrocatalyst with doping-modulated strain exhibited superior onset potentials of 0.91 V and 1.49 V for the ORR and OER, respectively, surpassing commercial Pt/C@RuO2 and benchmarking non-platinum group metal (non-PGM) catalysts. ZABs with the Cu–CoFS catalyst delivered excellent charge/discharge cycling performance with an extremely low voltage gap of 0.5 V at a current density of 10 mA cm−2 and successively 0.93 V at a high current density of 100 mA cm−2 and afforded an outstanding peak power density of 255 mW cm−2.

Atomically dispersed and nitrogen coordinated single metal sites (M-N-C, M=Fe, Co, Ni, or Mn) are the popular platinum group-metal (PGM)-free catalysts for many electrochemical reactions. Traditional wet-chemistry catalyst synthesis often requires complex procedures with unsatisfied reproducibility and scalability. Here, we report a chemical vapor deposition (CVD) strategy to synthesize the promising single metal site (M-N-C) catalysts. The deposition of gaseous 2-methylimidazole onto ZnO substrates doped with M, followed by an in-situ thermal activation, was proved effective in generating single metal sites well dispersed into porous carbon. In particular, an optimal CVD-derived Fe-N-C catalyst is featured with atomically dispersed FeN4 sites with increased Fe loading relative to other catalysts from wet-chemistry synthesis. The catalyst exhibited outstanding oxygen-reduction activity in acidic electrolytes, which was further studied in proton-exchange membrane fuel cells with encouraging performance. The CVD synthesis sheds some light on the mass production of single metal site catalysts towards advanced electrocatalysis.

Electrochemical reduction of CO2 is a promising route for sustainable production of fuels. A grand challenge is developing low-cost and efficient electrocatalysts that can enable rapid conversion with high product selectivity. Here we design a series of nickel phthalocyanine molecules supported on carbon nanotubes as molecularly dispersed electrocatalysts (MDEs), achieving CO2 reduction performances that are superior to aggregated molecular catalysts in terms of stability, activity and selectivity. The optimized MDE with methoxy group functionalization solves the stability issue of the original nickel phthalocyanine catalyst and catalyses the conversion of CO2 to CO with >99.5% selectivity at high current densities of up to −300 mA cm−2 in a gas diffusion electrode device with stable operation at −150 mA cm−2 for 40 h. The well-defined active sites of MDEs also facilitate the in-depth mechanistic understandings from in situ/operando X-ray absorption spectroscopy and theoretical calculations on structural factors that affect electrocatalytic performance. Widespread deployment of electrochemical CO2 reduction requires low-cost catalysts that perform well at high current densities. Zhang et al. show that methoxy-functionalized nickel phthalocyanine molecules on carbon nanotubes can operate as high-performing molecularly dispersed electrocatalysts at current densities of up to −300 mA cm–2.

Engineering single-atom electrocatalysts with high-loading amount holds great promise in energy conversion and storage application. Herein, we report a facile and economical approach to achieve an unprecedented high loading of single Ir atoms, up to ∼18wt%, on the nickel oxide (NiO) matrix as the electrocatalyst for oxygen evolution reaction (OER). It exhibits an overpotential of 215 mV at 10 mA cm-2 and a remarkable OER current density in alkaline electrolyte, surpassing NiO and IrO2 by 57 times and 46 times at 1.49 V vs RHE, respectively. Systematic characterizations, including X-ray absorption spectroscopy and aberration-corrected Z-contrast imaging, demonstrate that the Ir atoms are atomically dispersed at the outermost surface of NiO and are stabilized by covalent Ir-O bonding, which induces the isolated Ir atoms to form a favorable ∼4+ oxidation state. Density functional theory calculations reveal that the substituted single Ir atom not only serves as the active site for OER but also activates the surface reactivity of NiO, which thus leads to the dramatically improved OER performance. This synthesis method of developing high-loading single-atom catalysts can be extended to other single-atom catalysts and paves the way for industrial applications of single-atom catalysts.

Recently, considerable attention has been paid to the stabilization of atomic platinum (Pt) catalysts on desirable supports in order to reduce Pt consumption, improve the catalyst stability, and thereafter enhance the catalyst performance in renewable energy devices such as fuel cells and zinc-air batteries (ZABs). Herein, we rationally designed a novel strategy to stabilize atomic Pt catalysts in alloyed platinum cobalt (PtCo) nanosheets with trapped interstitial fluorine (SA-PtCoF) for ZABs. The trapped interstitial F atoms in the PtCoF matrix induce lattice distortion resulting in weakening of the Pt–Co bond, which is the driving force to form atomic Pt. As a result, the onset potentials of SA-PtCoF are 0.95 V and 1.50 V for the oxygen reduction and evolution reactions (ORR and OER), respectively, superior to commercial Pt/C@RuO2. When used in ZABs, the designed SA-PtCoF can afford a peak power density of 125 mW cm−2 with a specific capacity of 808 mA h gZn−1 and excellent cyclability over 240 h, surpassing the state-of-the-art catalysts.

Proton-exchange membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) are promising power sources from portable electronic devices to vehicles. The high-cost issue of these low-temperature fuel cells can be primarily addressed by using platinum-group metal (PGM)-free oxygen reduction reaction (ORR) catalysts, in particular atomically dispersed metal–nitrogen–carbon (M–N–C, M = Fe, Co, Mn). Furthermore, a significant advantage of M–N–C catalysts is their superior methanol tolerance over Pt, which can mitigate the methanol cross-over effect and offer great potential of using a higher concentration of methanol in DMFCs. Here, we investigated the ORR catalytic properties of M–N–C catalysts in methanol-containing acidic electrolytes via experiments and density functional theory (DFT) calculations. FeN4 sites demonstrated the highest methanol tolerance ability when compared to metal-free pyridinic N, CoN4, and MnN4 active sites. The methanol adsorption on MN4 sites is even strengthened when electrode potentials are applied during the ORR. The negative influence of methanol adsorption becomes significant for methanol concentrations higher than 2.0 M. However, the methanol adsorption does not affect the 4e− ORR pathway or chemically destroy the FeN4 sites. The understanding of the methanol-induced ORR activity loss guides the design of promising M–N–C cathode catalyst in DMFCs. Accordingly, we developed a dual-metal site Fe/Co–N–C catalyst through a combined chemical-doping and adsorption strategy. Instead of generating a possible synergistic effect, the introduced Co atoms in the first doping step act as “scissors” for Zn removal in metal–organic frameworks (MOFs), which is crucial for modifying the porosity of the catalyst and providing more defects for stabilizing the active FeN4 sites generated in the second adsorption step. The Fe/Co–N–C catalyst significantly improved the ORR catalytic activity and delivered remarkably enhanced peak power densities (i.e., 502 and 135 mW cm−2) under H2–air and methanol–air conditions, respectively, representing the best performance for both types of fuel cells. Notably, the fundamental understanding of methanol tolerance, along with the encouraging DMFC performance, will open an avenue for the potential application of atomically dispersed M–N–C catalysts in other direct alcohol or ammonia fuel cells.

Atomically dispersed and nitrogen-coordinated single iron sites (FeN4) embedded in carbon (Fe-N-C) catalysts are the most promising platinum group metal (PGM)-free catalysts. However, they have yet to match their Pt counterparts for oxygen reduction reaction (ORR) activity and stability in proton exchange membrane fuel cells (PEMFCs). Here, we developed viable Fe-N-C catalysts, which, for the first time, demonstrated competitive activity to that of Pt/C catalysts and dramatically enhanced stability and durability under practical PEMFC operating conditions. The most active Fe-N-C catalyst achieved a record half-wave potential (E1/2 = 0.915 V vs. RHE at 0.6 mgcatcm-2) and an ORR mass activity of 10.5 mA mgcat at 0.9 V in (RDE) tests, exceeding a Pt/C baseline catalyst (60 µgPt cm-2) by 40 mV in acidic electrolytes. This compelling activity of the Fe-N-C catalyst in aqueous acids on rotating disk electrode (RDE) was successfully transferred to a fuel cell membrane electrode assemblies (MEAs), generating an initial current density of 44.2 mA cm-2 exceeding the U.S. DOE 2025 target (i.e., 44 mA cm-2) at 0.9 VIR-free under O2. Under practical hydrogen-air conditions, record 151 mA cm-2 at 0.8 V and peak power density of 601 mW cm-2 were achieved. Importantly, we discovered that depositing nitrogen-carbon species on the catalyst surface via chemical vapor deposition (CVD) dramatically enhanced catalyst stability, evidenced by performance durability after accelerated stress tests (30 000 square-wave voltage cycles under H2/air) and long-term steady-state life tests (> 300 hours at 0.67 V). Innovative identical location-scanning transmission electron microscopy (IL-STEM) experiments confirmed that the CVD process leads to deposition of nitrogen-doped carbon onto the catalyst surfaces. Along with theoretical modeling, a reconstruction of the carbon structure adjacent to FeN4 sites leads to increased robustness against demetallation and carbon oxidation. This work opens new avenues for developing earth-abundant iron-based catalysts with extraordinary activity and stability, thus competing with Pt and addressing the cost barrier of current PEMFCs.

Electrides are ionic crystals in which the electrons prefer to occupy free space, serving as anions. Because the electrons prefer to be in the pockets, channels, or layers to the atomic orbitals around the nuclei, it has been challenging to find electrides with partially filled d-shell transition metals, since an unoccupied d-shell provides an energetically favorable location for the electrons to occupy. We recently predicted the existence of electrides with partially filled d-shells using high-throughput computational screening. Here, we provide experimental support using X-ray absorption spectroscopy and X-ray and neutron diffraction to show that Sr3CrN3 is indeed an electride despite its partial d-shell configuration. Our findings indicate that Sr3CrN3 is the first known electride with a partially filled d-shell transition metal, in agreement with theory, which significantly broadens the criteria for the search for new electride materials.

Carbon materials embedded with atomically dispersed metal sites have recently demonstrated intriguing performance as electrocatalysts. However, it remains challenging to construct abundant single m...

The development of commercially friendly and stable catalysts for oxygen reduction reaction (ORR) is critical for many energy conversion systems such as fuel cells and metal-air batteries. Many Co-based perovskite oxides such as LaCoO3 have been discovered as the stable and active ORR catalysts, which can be good candidates to replace platinum (Pt). Although researchers have tried substituting various transition metals into the Co-based perovskite catalysts to improve the ORR performance, the influence of substitution on the ORR mechanism is rarely studied. In this paper, we explore the evolution of ORR mechanism after substituting Fe into LaCoO3, using the combination of X-ray photoelectron spectroscopy, high-resolution X-ray microscopy, X-ray diffraction, surface-sensitive soft X-ray absorption spectroscopy characterization, and electrochemical tests. We observed enhanced catalytic activities and increased electron transfer numbers during the ORR in Co-rich perovskite, which are attributed to the optimized eg filling numbers and the stronger hybridization of transition metal 3d and oxygen 2p bands. The discoveries in this paper provide deep insights into the ORR catalysis mechanism on metal oxides and new guidelines for the design of Pt-free ORR catalysts.

TiO2 is manufactured for white pigments, solar cells, self-cleaning surfaces and devices, and other photocatalytic applications. The industrial synthesis of TiO2 entails: (1) the dissolution of ilmenite ore (FeTiO3) in aqueous sulfuric acid which precipitates the Fe while retaining the Ti in solution, followed by (2) dilution or heating the Ti sulfate solution to precipitate the pure form of TiO2. The underlying chemistry of these processing steps remains poorly understood. Here we show that the dissolution of a simple TiIV-sulfate salt, representative of the industrial sulfate process for the production of TiO2, immediately self-assembles into a soluble Ti-octadecameric cluster, denoted as {Ti18}. We observed {Ti18} in solution by small-angle X-ray scattering and Ti extended X-ray absorption fine structure (Ti-EXAFS) analysis, and ultimately crystallized it for absolute identification. The {Ti18} metal-oxo cluster was previously reported as a polycation; but shown here, it can also be a polyanion, dependent on the number of sulfate ligands it carries. After immediate self-assembly, the {Ti18}-cluster persists until TiO2 precipitates, with no easily identified structural intermediates in the solution or solid state, despite the fact that the atomic arrangement of {Ti18} differs vastly from that of titania. The evolution from solution phase {Ti18} to precipitated TiO2 nanoparticles was detailed by X-ray scattering and Ti-EXAFS. We offer a hypothesis for the key mechanism of complete separation of Fe from Ti in the industrial sulfate process. These findings also highlight the emerging importance of the unusual Ti(Ti)5 pentagonal building unit, featured in {Ti18} as well as other early d0 transition metal-oxo clusters including Nb, Mo and W. Finally, this study presents an example of crystal growth mechanisms in which the observed “pre-nucleation cluster” does not necessarily predicate the structure of the precipitated solid.

Carbon supports used in oxygen-reduction cathode catalysts for proton exchange membrane fuel cells (PEMFCs) are vulnerable to corrosion under harsh operating conditions, leading to poor performance durability. To address this issue, we have developed highly stable porous graphitic carbon (PGC) produced through pyrolysis of a 3D polymer hydrogel in combination with Mn. The resulting PGC features multilayer carbon sheets assembled in porous and flower-like morphologies. In situ high-temperature electron microscopy was employed to dynamically monitor the carbonization process up to 1100 °C, suggesting that the 3D polymer hydrogel provides high porosity at multiple scales, and that Mn catalyzes the graphitization process more effectively than other metals. Compared to conventional carbon supports such as Vulcan, Ketjenblack, and graphitized carbon, PGC provides an improved balance between high graphitization and hierarchical porosity, which is favorable for uniform Pt nanoparticle dispersion and enhanced corrosion resistance. As a result, Pt supported on PGC exhibits remarkably enhanced stability. In addition to thorough testing in aqueous electrolytes, we also conducted fuel cell testing using durability protocols recommended by the U.S. Department of Energy (DOE). After 5000 voltage cycles from 1.0 to 1.5 V, the Pt/PGC catalyst only lost 9 mV at a current density of 1.5 A cm−2, dramatically exceeding the DOE support durability target (

Complementary to C–H bond activation, C–C bond activation has emerged over the past few years as an increasingly powerful tool to access and modify complex molecules. Ketones, owing to their versatility and availability, provide a significant platform for C–C bond activating reactions. Herein, we reported a β-carbon elimination strategy for alkene(sp2)–C(O) bonds to realize the olefination of unstrained enones via a vinyl palladium species, which delivers a series of conjugated polyene compounds. The protocol features broad substrate scope, excellent functional group tolerance and can be extended to dba (dibenzylideneacetone) substrates for olefination, alkynylation, arylation and amination, which demonstrates the generality of the approach and affords two valuable products in one pot. Furthermore, the late-stage functionalization of natural products (β-ionone and acetyl cedrene) and synthesis of natural products (piperine, lignarenone, novenone) highlight the potential utility of the reaction.

Ir and its oxide are the only available oxygen evolution reaction (OER) electrocatalysts with reasonably high activity and stability for commercial proton-exchange membrane electrolyzers. However, the establishment of structure–performance relationships for the design of better Ir-based electrocatalysts is hindered by their uncontrolled surface reconstruction during OER in acidic media. Herein, we monitor the structural evolution of two model Ir nanocrystals (one with a flat surface enclosed by (100) facets and the other with a concave surface containing numerous high-index planes) under acidic OER conditions. Operando X-ray absorption spectroscopy measurements reveal that the promotion of surface IrOx formation during the OER by the concave Ir surface with high-index planes results in a gradual OER activity increase, while a decrease in activity and limited oxide formation are observed for the flat Ir surface. After the activation process, the Ir concave surface exhibits ~ 10 times higher activity than the flat surface. Density functional theory computations reveal that Ir high-index surfaces are thermodynamically preferred for the adsorption of oxygen atoms and the formation of surface oxides under OER conditions. Thus, our work establishes a structure–performance relationship for Ir nanocrystals under operating conditions, providing new principles for the design of nanoscale OER electrocatalysts.

This study aimed to develop a highly selective, sensitive and fast liquid chromatography tandem mass spectrometric (LC-MS/MS) method for the determination of obacunone in rat plasma. Sample preparation was accomplished by a simple solid-phase extraction procedure. Chromatographic separation was carried out on an ACQUITY BEH C18 column using acetonitrile/methanol (1:1, v/v) and 0.1% formic acid in water as mobile phase at a flow rate of 0.4 mL/min. Quantification was performed with multiple reactions monitoring in positive ion mode with the precursor-to-product ion transitions at m/z 455.2 > 161.1 for obacunone and m/z 515.2 > 161.1 for nomilin (internal standard). The assay was demonstrated to be linear over the concentration range of 0.1-1,000 ng/mL with correlation coefficient >0.999 (r > 0.999). The intra- and inter-day accuracy ranged from -8.33 to 10.40%, while the precision was 75.32%, and the assay was free of matrix effect. The validated LC-MS/MS method was successfully applied to the pharmacokinetic study of obacunone in rats after oral and intravenous administrations. The oral bioavailability of obacunone was 13.59%.

Increasing catalytic activity and durability of atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts for the oxygen reduction reaction (ORR) cathode in proton-exchange-membrane fuel cells remains a grand challenge. Here, a high-power and durable Co-N-C nanofiber catalyst synthesized through electrospinning cobalt-doped zeolitic imidazolate frameworks into selected polyacrylonitrile and poly(vinylpyrrolidone) polymers is reported. The distinct porous fibrous morphology and hierarchical structures play a vital role in boosting electrode performance by exposing more accessible active sites, providing facile electron conductivity, and facilitating the mass transport of reactant. The enhanced intrinsic activity is attributed to the extra graphitic N dopants surrounding the CoN4 moieties. The highly graphitized carbon matrix in the catalyst is beneficial for enhancing the carbon corrosion resistance, thereby promoting catalyst stability. The unique nanoscale X-ray computed tomography verifies the well-distributed ionomer coverage throughout the fibrous carbon network in the catalyst. The membrane electrode assembly achieves a power density of 0.40 W cm-2 in a practical H2 /air cell (1.0 bar) and demonstrates significantly enhanced durability under accelerated stability tests. The combination of the intrinsic activity and stability of single Co sites, along with unique catalyst architecture, provide new insight into designing efficient PGM-free electrodes with improved performance and durability.

The development of an efficient electrocatalyst toward the hydrogen evolution reaction (HER) is of significant importance in transforming renewable electricity to pure and clean hydrogen by water splitting. However, the construction of an active electrocatalyst with multiple sites that can promote the dissociation of water molecules still remains a great challenge. Herein, a partial‐single‐atom, partial‐nanoparticle composite consisting of nanosized ruthenium (Ru) nanoparticles (NPs) and individual Ru atoms as an energy‐efficient HER catalyst in alkaline medium is reported. The formation of this unique composite mainly results from the dispersion of Ru NPs to small‐size NPs and single atoms (SAs) on the Fe/N codoped carbon (Fe–N–C) substrate due to the thermodynamic stability. The optimal catalyst exhibits an outstanding HER activity with an ultralow overpotential (9 mV) at 10 mA cm−2 (η 10), a high turnover frequency (8.9 H2 s−1 at 50 mV overpotential), and nearly 100% Faraday efficiency, outperforming the state‐of‐the‐art commercial Pt/C and other reported HER electrocatalysts in alkaline condition. Both experimental and theoretical calculations reveal that the coexistence of Ru NPs and SAs can improve the hydride coupling and water dissociation kinetics, thus synergistically enhancing alkaline hydrogen evolution performance., A nanocomposite of partial‐single‐atom and partial‐nanoparticle formed within the Fe–N–C matrix serves as a multiple‐site electrocatalyst toward hydrogen evolution reaction with an ultralow overpotential of 9 mV to achieve 10 mA cm−2, a high turnover frequency, and ≈100% Faradaic efficiency. Theoretical calculations reveal that ruthenium single‐atoms effectively facilitate water dissociation, and ruthenium nanoparticles promote hydrogen desorption.

Single-atom nanozymes (SANs) possess unique features of maximum atomic utilization and present highly assembled enzyme-like structure and remarkable enzyme-like activity. By introducing SANs into immunoassay, limitations of ELISA such as low stability of horseradish peroxidase (HRP) can be well addressed, thereby improving the performance of the immunoassays. In this work, we have developed novel Fe-N-C single-atom nanozymes (Fe-N x SANs) derived from Fe-doped polypyrrole (PPy) nanotube and substituted the enzymes in ELISA kit for enhancing the detection sensitivity of amyloid beta 1-40. Results indicate that the Fe-N x SANs contain high density of single-atom active sites and comparable enzyme-like properties as HRP, owing to the maximized utilization of Fe atoms and their abundant active sites, which could mimic natural metalloproteases structures. Further designed SAN-linked immunosorbent assay (SAN-LISA) demonstrates the ultralow limit of detection (LOD) of 0.88 pg/mL, much more sensitive than that of commercial ELISA (9.98 pg/mL). The results confirm that the Fe-N x SANs can serve as a satisfactory replacement of enzyme labels, which show great potential as an ultrasensitive colorimetric immunoassay.

Platinum group metal (PGM)-free catalysts that are also iron free are highly desirable for the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells, as they avoid possible Fenton reactions. Here we report an efficient ORR catalyst that consists of atomically dispersed nitrogen-coordinated single Mn sites on partially graphitic carbon (Mn-N-C). Evidence for the embedding of the atomically dispersed MnN4 moieties within the carbon surface-exposed basal planes was established by X-ray absorption spectroscopy and their dispersion was confirmed by aberration-corrected electron microscopy with atomic resolution. The Mn-N-C catalyst exhibited a half-wave potential of 0.80 V versus the reversible hydrogen electrode, approaching that of Fe-N-C catalysts, along with significantly enhanced stability in acidic media. The encouraging performance of the Mn-N-C catalyst as a PGM-free cathode was demonstrated in fuel cell tests. First-principles calculations further support the MnN4 sites as the origin of the ORR activity via a 4e− pathway in acidic media. Platinum group metal- and iron-free catalysts are highly desirable for the oxygen reduction reaction in proton-exchange membrane fuel cells. Now, Wu and co-workers show a carbon catalyst with atomically dispersed single Mn sites as an efficient catalyst with enhanced stability in acidic media.

Herein, we report the exploration of understanding the reactivity and structure of atomically dispersed M–N4 (M = Fe and Co) sites for the CO2 reduction reaction (CO2RR). Nitrogen coordinated Fe or Co site atomically dispersed into carbons (M–N–C) containing bulk- and edge-hosted M–N4 coordination were prepared by using Fe- or Co-doped metal–organic framework precursors, respectively, which were further studied as ideal model catalysts. Fe is intrinsically more active than Co in M–N4 for the reduction of CO2 to CO, in terms of a larger current density and a higher CO Faradaic efficiency (FE) (93% vs. 45%). First principle computations elucidated that the edge-hosted M–N2+2–C8 moieties bridging two adjacent armchair-like graphitic layers is the active sites for the CO2RR. They are much more active than previously proposed bulk-hosted M–N4–C10 moieties embedded compactly in a graphitic layer. During the CO2RR, when the dissociation of *COOH occurs on the M–N2+2–C8, the metal atom is the site for the adsorpt...

It remains a grand challenge to replace platinum group metal (PGM) catalysts with earth-abundant materials for the oxygen reduction reaction (ORR) in acidic media, which is crucial for large-scale deployment of proton exchange membrane fuel cells (PEMFCs). Here, we report a high-performance atomic Fe catalyst derived from chemically Fe-doped zeolitic imidazolate frameworks (ZIFs) by directly bonding Fe ions to imidazolate ligands within 3D frameworks. Although the ZIF was identified as a promising precursor, the new synthetic chemistry enables the creation of well-dispersed atomic Fe sites embedded into porous carbon without the formation of aggregates. The size of catalyst particles is tunable through synthesizing Fe-doped ZIF nanocrystal precursors in a wide range from 20 to 1000 nm followed by one-step thermal activation. Similar to Pt nanoparticles, the unique size control without altering chemical properties afforded by this approach is able to increase the number of PGM-free active sites. The best ORR activity is measured with the catalyst at a size of 50 nm. Further size reduction to 20 nm leads to significant particle agglomeration, thus decreasing the activity. Using the homogeneous atomic Fe model catalysts, we elucidated the active site formation process through correlating measured ORR activity with the change of chemical bonds in precursors during thermal activation up to 1100 °C. The critical temperature to form active sites is 800 °C, which is associated with a new Fe species with a reduced oxidation number (from Fe

Transition-metal-based molecular complexes are a class of catalyst materials for electrochemical CO2 reduction to CO that can be rationally designed to deliver high catalytic performance. One common mechanistic feature of these electrocatalysts developed thus far is an electrogenerated reduced metal center associated with catalytic CO2 reduction. Here we report a heterogenized zinc–porphyrin complex (zinc(II) 5,10,15,20-tetramesitylporphyrin) as an electrocatalyst that delivers a turnover frequency as high as 14.4 site–1 s–1 and a Faradaic efficiency as high as 95% for CO2 electroreduction to CO at −1.7 V vs the standard hydrogen electrode in an organic/water mixed electrolyte. While the Zn center is critical to the observed catalysis, in situ and operando X-ray absorption spectroscopic studies reveal that it is redox-innocent throughout the potential range. Cyclic voltammetry indicates that the porphyrin ligand may act as a redox mediator. Chemical reduction of the zinc–porphyrin complex further confirms that the reduction is ligand-based and the reduced species can react with CO2. This represents the first example of a transition-metal complex for CO2 electroreduction catalysis with its metal center being redox-innocent under working conditions., A zinc−porphyrin complex, with the redox-innocent Zn ion binding reaction intermediates and the ligand mediating electron transfer, catalyzes CO2 electroreduction to CO in high Faradaic efficiency.

Silica is the most abundant component on the earth’s surface. It plays an important role in many natural processes. Silica is also a critical material for a wide range of technical applications such as in optics and electronics. In this work, we discuss our recent experimental observation of the unusual amber coloration of aluminum doped sol-gel glass that has not been reported in the past. We characterized Al-doped sol-gel glasses, prepared at different sintering temperature, using a plethora of techniques to investigate the origin of this unusual coloration and to understand their structural and chemical properties. We used these experimental results to test a number of possible coloring mechanisms. The results suggested this coloring is likely caused by temperature-dependent aluminum-associated defect centers associated with different amorphous-to-crystalline ratios of the annealed sol-gel silica glass structures.

Formic acid (or formate) is suggested to be one of the most economically viable products from electrochemical carbon dioxide reduction. However, its commercial viability hinges on the development of highly active and selective electrocatalysts. Here we report that structural defects have a profound positive impact on the electrocatalytic performance of bismuth. Bismuth oxide double-walled nanotubes with fragmented surface are prepared as a template, and are cathodically converted to defective bismuth nanotubes. This converted electrocatalyst enables carbon dioxide reduction to formate with excellent activity, selectivity and stability. Most significantly, its current density reaches ~288 mA cm−2 at −0.61 V versus reversible hydrogen electrode within a flow cell reactor under ambient conditions. Using density functional theory calculations, the excellent activity and selectivity are rationalized as the outcome of abundant defective bismuth sites that stabilize the *OCHO intermediate. Furthermore, this electrocatalyst is coupled with silicon photocathodes and achieves high-performance photoelectrochemical carbon dioxide reduction., Carbon dioxide can be electrochemically reduced to form valuable chemical feedstocks, but efficiency of electrocatalysts should be improved. Here the authors report nanotube-derived bismuth for electrocatalytic reduction of carbon dioxide to formate, with performance that is enhanced by defects.

Single atom catalyst, which contains isolated metal atoms singly dispersed on supports, has great potential for achieving high activity and selectivity in hetero-catalysis and electrocatalysis. However, the activity and stability of single atoms and their interaction with support still remains a mystery. Here we show a stable single atomic ruthenium catalyst anchoring on the surface of cobalt iron layered double hydroxides, which possesses a strong electronic coupling between ruthenium and layered double hydroxides. With 0.45 wt.% ruthenium loading, the catalyst exhibits outstanding activity with overpotential 198 mV at the current density of 10 mA cm−2 and a small Tafel slope of 39 mV dec−1 for oxygen evolution reaction. By using operando X-ray absorption spectroscopy, it is disclosed that the isolated single atom ruthenium was kept under the oxidation states of 4+ even at high overpotential due to synergetic electron coupling, which endow exceptional electrocatalytic activity and stability simultaneously., While water splitting offers a carbon-neutral means to store energy, water oxidation is sluggish and corrosive over earth-abundant electrocatalysts. Here, authors show single ruthenium atoms over cobalt-iron layered double hydroxides to be effective and stable oxygen evolution electrocatalysts.

Restructuring-induced catalytic activity is an intriguing phenomenon of fundamental importance to rational design of high-performance catalyst materials. We study three copper-complex materials for electrocatalytic carbon dioxide reduction. Among them, the copper(II) phthalocyanine exhibits by far the highest activity for yielding methane with a Faradaic efficiency of 66% and a partial current density of 13 mA cm−2 at the potential of – 1.06 V versus the reversible hydrogen electrode. Utilizing in-situ and operando X-ray absorption spectroscopy, we find that under the working conditions copper(II) phthalocyanine undergoes reversible structural and oxidation state changes to form ~ 2 nm metallic copper clusters, which catalyzes the carbon dioxide-to-methane conversion. Density functional calculations rationalize the restructuring behavior and attribute the reversibility to the strong divalent metal ion–ligand coordination in the copper(II) phthalocyanine molecular structure and the small size of the generated copper clusters under the reaction conditions., The catalytic conversion of carbon dioxide into value-added products requires an understanding of the active species present under working conditions. Here, the authors discover copper-containing complexes to reversibly transform during electrocatalysis into methane-producing copper nanoclusters.

Due to the Fenton reaction, the presence of Fe and peroxide in electrodes generates free radicals causing serious degradation of the organic ionomer and the membrane. Pt-free and Fe-free cathode catalysts therefore are urgently needed for durable and inexpensive proton exchange membrane fuel cells (PEMFCs). Herein, a high-performance nitrogen-coordinated single Co atom catalyst is derived from Co-doped metal-organic frameworks (MOFs) through a one-step thermal activation. Aberration-corrected electron microscopy combined with X-ray absorption spectroscopy virtually verifies the CoN4 coordination at an atomic level in the catalysts. Through investigating effects of Co doping contents and thermal activation temperature, an atomically Co site dispersed catalyst with optimal chemical and structural properties has achieved respectable activity and stability for the oxygen reduction reaction (ORR) in challenging acidic media (e.g., half-wave potential of 0.80 V vs reversible hydrogen electrode (RHE). The performance is comparable to Fe-based catalysts and 60 mV lower than Pt/C -60 μg Pt cm-2 ). Fuel cell tests confirm that catalyst activity and stability can translate to high-performance cathodes in PEMFCs. The remarkably enhanced ORR performance is attributed to the presence of well-dispersed CoN4 active sites embedded in 3D porous MOF-derived carbon particles, omitting any inactive Co aggregates.